Used Bartels Drawer Shelf for sale (2,402)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Lrodpfxsfdkb Ts Afqol - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Lsdpfx Asmhh Dzsfqsrl The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Lrodomhh Anspfx Afqjl Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Lredpeguk A Hefx Afqel Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Ledsguk Dkspfx Afqsrl According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times Lsdpfx Aomhhy Nsfqorl - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Lsdemhh Dtepfx Afqerl The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Ledoguk Dvepfx Afqorl Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, total length: 700 mm, total width: 950 mm, total height: 2,000 mm, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: AC, Self-Service Display Rack 950 with lighting 4 beech wood grids 12 dispensing flaps bottom shelf Connection: 220V Dimensions: 950 x 700 x 2000 mm (W x D x H) mobile Used unit Lrodpjytl Thsfx Afqsl Options: Maintenance contract Delivery service Instruction & commissioning We have further shelving units in stock!

Condition: used, We are offering used pallet racking for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box section: 120 x 50 mm Bay load: 2,400 kg Colour: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: 2 starter bays + 8 extension bays 12 frames 40 beams 160 safety pins Yellow bumper guards (upright protection) can be purchased for €5.00 per piece net. Ljdpfx Afsy Dgcmjqjrl PRICES Net price: €1,115.68 Gross price: €1,327.66 (incl. VAT) Available quantity: 350 m pallet racking Location: 14656 Brieselang – transport can be organized on request YOUR CONTACT PERSONS Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Extra costs depend on the destination and shipment volume and can be quoted individually upon request. TERMS OF PAYMENT Terms of payment are to be agreed upon in the case of an order. The price stated is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK in Nordhorn specializes in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used pallet racks for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Ljdpfxoy Dga Eo Afqerl Beams: 2,700 mm Box profile: 120 x 50 mm Bay load: 2,400 kg Color: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: - 4 frames - 12 beams - 2 locking pins The yellow collision protectors (upright protection) can be purchased for €5.00 each (net). PRICES Price: €360.00 net Price: €428.40 incl. VAT Available quantity: 350 m of pallet racking Location: 14656 Brieselang – Transport can be arranged upon request YOUR CONTACTS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with transport and assembly of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and shipment size and can be requested individually from us. PAYMENT TERMS Payment terms are to be arranged in the event of an order. The price stated is per unit/net price or as specified in the item description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of intralogistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for commerce, industry, and trades. We continuously offer a range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks for success from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, 0 9 und 7 St. range L-W-H 720x710x1000 mm weight . kg weight max. in kg . kg with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ljdpfeyx Ipqex Afqsrl If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Technical specifications for the side panel: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x mesh side panel, used Material color: light silver lacquered for frame depth: 600 mm for frame height: 2,490 mm Item: SWG 3625 Lrodpfx Asylt Udsfqjl Dimensions: 2,485 x 450 mm Mesh size: approx. 50 x 50 mm Note: Mounting brackets are not included in the scope of delivery. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General product information: This item is offered only for collection. Should transport or shipping of this item be required, additional costs will apply. Please contact us to inquire about delivery costs, which vary depending on delivery location or scope of order.

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker Lredpfxsx Hf Tpe Afqsl -Tool cabinet: Steel cabinet with 2 doors, solid construction with 8 drawers -Width: 2040 mm -Depth: 780 mm -Height: 2150 mm -Drawers/shelves: See photos for layout/height -Door: lockable, without a lap -Weight: 603 kg

Condition: used, Technical data for the shelf panel: Shelving system: Meta Type: Clip Included in delivery: 01x Shelf panel, used Panel designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pc. Max. load per shelf panel: 150 kg with evenly distributed load Your contacts at our company: Mr. Andre Evering Ljdpfx Aeyk T E Tsfqorl Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs can be queried separately with us depending on the delivery location and the scope of delivery.

Condition: new, Technical data for shelf panel: Shelving system: Meta Type: Clip Scope of delivery: 01x shelf panel, used Panel designation: MS150-III Material colour: Sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg/unit Maximum load per shelf panel: 150 kg with evenly distributed load Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested from us individually, depending on delivery location and scope. Ljdpfxsyk R Rms Afqsrl

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 4 drawers -Width: 2080 mm -Depth: 870 mm -Height: 2175 mm -Drawers/shelves: See photos for layout/height Lsdpjx Hf Uysfx Afqjrl -Door: lockable, without a lap -Weight: 594 kg

Condition: used, functionality: fully functional, Shelf trolley / Transport trolley / Order picking trolley / up to 7 levels / 3 mesh walls / 3 shelves Ledpfjyw Nthsx Afqjrl

Condition: used, This listing is for the Burton Safes FF 4 Drawer Fire Resistant Filing Cabinet – with Key Lock The unit is in full working condition and is ready for immediate use Please note that this item has a weight of 210kg Fire Rating: 60 Minutes Includes 1 Security Key - Others may be purchased from manufacturer, we understand the cost will be circa £30 ex postage Lsdpfexv Dnujx Afqorl External Dimensions 1500mm height x 545mm width x 655mm depth Volume: 48 Litres Cabinet is constructed with Double walled with the cavity between the inner and outer walls filled with a fire-resistant material. Independently tested and certified to EN15659 LFS 60P by ECBS Tested at temperatures of up to 900°C Drawers are suitable for both A4 and Foolscap files, each drawer can hold up to 40kg Anti-tilt device, means that only one drawer at a time can be opened Tactile rubber handles

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet, sturdy design -7 drawers: layout/height see photos, shelf can be opened at the top -lockable: without key -Quantity: 2x cabinet available -Price per piece Lrjdpfercnmaex Afqjl -Dimensions: WTH 600/610/H950 mm -Weight: 104 kg/pc.

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: Drawer cabinet on a mobile base, stable design -3 drawers: layout/height see photos, shelf can be opened at the top -lockable: without key -Dimensions: WTH 650/660/H1200 mm Lsdpfx Afjrb E Ezjqerl -Weight: 82 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet Lrodpfx Asrb E Hiofqel -Tool cabinet: Drawer cabinet, sturdy design -7 drawers: layout/height see photos, shelf can be opened at the top -lockable: without key -Dimensions: WTH 600/620/H960 mm -Weight: 105 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet Lrodpfx Ajrc Ilyjfqjl -Tool cabinet: Drawer cabinet, sturdy design -7 drawers: layout/height see photos -lockable: without key -Dimensions: WTH 760/710/H1120 mm -Weight: 180 kg

Condition: good (used), Stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, small load carriers, storage bins, shelf boxes, shelf boxes -Manufacturer: Schoeller, Arca Systems shelving units -Type: 9133 -Number: 1190 boxes available -Price: per piece, minimum order 5 pieces Lrsdpouzn Dxsfx Afqol -Dimensions: 595/230/H100 mm -Weight: 0.7 kg/pc.

Condition: used, Year of construction: 2017, functionality: fully functional, load capacity per storage section: 1,500 kg, total length: 2,700 mm, total height: 100 mm, total width: 50 mm, Pallet rack / Heavy-duty rack / Beam L=270 from HLF Heiss Only the beams are being sold Lrodpfoy H Ew Iox Afqel Used item, in excellent condition, see photos Supplier: HLF Heiss Quantity: 200 pcs Beam length: 270 cm Beam height: 10 cm / Width: 5 cm Maximum load per level: 1,500 kg Color: orange Including locking pins Year of manufacture: 2017 Item is in stock in Wilfersdorf near Mistelbach/Lower Austria. Transport available upon request. Inspection possible at any time by appointment.