Used Balers Kenbay Brg 1 2005 for sale (77,944)

Condition: excellent (used), Year of construction: 2005, For sale is a fully functional and very well-maintained dual-fuel burner from Weishaupt, including gas train (Dungs DN 65) 1. Burner type: Weishaupt RGL50/1-B Output: 600–5400 kW Version: ZM-NR Year of manufacture: 2005 For sale is a fully functional and very well-maintained dual-fuel burner from Weishaupt, including gas train (Dungs DN 65) Pgsdpfx Aewgbpaompjk 2. Burner type: Weishaupt RGL50/1-B Output: 600–5400 kW Version: ZM-NR Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Pedpfxewgk Raj Ampegk

Condition: excellent (used), Year of construction: 2002, 1 WEISHAUPT G7/1-D, gas burner with gas train. -Output: 250-1550 kW -Version: ZD-LN -Year of manufacture: 2002 2 Pjdpfx Aewgykcompogk WEISHAUPT G7/1-D, gas burner with gas train. -Output: 250-1750 kW -Version: ZM -Year of manufacture: 2002

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, total length: 1,240 mm, total width: 835 mm, Hello, I sell sheeted containers - metal 1/2 new - dimensions 1240 x 835 x 500 mm - weight of the container about 55 kg Pgjdpjupumusfx Ampjk - payload 1000 kg - new containers - price 115 eur/net/unit. - sale only against VAT invoice

Condition: used, overall weight: 575 kg, volume flow: 550 m³/h, power: 75 kW (101.97 HP), We offer for sale Grundfos pump Type TP 200-510/4 A-F-A-DBUE. The pump is used, in very good condition. Pjdpfxjwqnfvj Ampsgk

Condition: used, functionality: fully functional, power: 1.5 kW (2.04 HP), rotational speed (max.): 28 rpm, input voltage: 400 V, input frequency: 500 Hz, type of input current: three-phase, type of cooling: air, Electric variator electric motor 1.5kW 0-28 rpm Manufacturer: SIEMENS Type: 1 LA9090-2WA91-Z Power: 1.50kw IP54 Voltage: 50Hz 220/380 V Current consumption: 5.60/3.20 A Revolution: 2900/min Weight: 50 kg Pgodpfx Ameud Id Iepek Gearbox Manufacturer: SIEMENS Type: FKSD 712 B3 P1 Output revolution: 0-28 1/min

Condition: excellent (used), RNA 900 mm diameter vibration feeder, component feeder / ct1339a In good condition, for sale with ESR3000 controller. Manufacturer: RNA Type: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 min - 1 Voltage: 220 V Power: 5.4 Diameter: 900 mm A = Output height: 167mm B = Trail width: 50mm Pgjdpfx Amjh Iy Ttopok D = Bowl diameter: 980mm H = bowl height: 250mm S = Track division: 81mm

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability Podjwdwv Repfx Ampjgk (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Podpfxjd S S N Re Ampjgk

Condition: good (used), Samed Innovazioni MM 1 Corner cutter for hardcovers Pedpfx Amowuni Njpogk Produced in Italy, Samed Innovazioni Rebord. Very good condition. This is a professional, production device for cutting corners for hardcover. Year of production 2014. Solid construction ensures precision of operation. Interchangeable knives. Adjustable cutting depth. One set of knives included.

Condition: excellent (used), We offer used Gitterbox containers in various dimensions: - 1240x835x500mm - 1240x835x650mm - 1240x835x700mm These containers are fully functional and undamaged. Available in large quantities. Rental is possible. Pgedexzin Rjpfx Ampjk We speak Polish, German, and English. This price applies only to full truckload orders. We do not ship individual items or small quantities.

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Podpfx Amjfx Ibnspjgk MDV 2000 Characteristics: Max wheel diameter: 2000 mm Min wheel diameter: 50 mm Max module: 12 Min module: 3

Condition: ready for operation (used), Year of construction: 1989, Romanian Lathe SP 1000x1500 Manufacturer: Upetrom 1 MAI Chuck diameter: 1000 mm Max swing over bed: 1000 mm Distance between centers: 1500 mm Max swing over slide: 640 mm Max weight of workpiece between centers: 10,000 kg Video of the machine under power available Psdjw Ifubepfx Ampsgk

Condition: excellent (used), Year of construction: 1980, LATHE SPL 1250x6000 Chuck diameter: 1250 mm Max turning over cross slide: 920 mm Length between centers: 6000 mm Main motor: 22 kW Pgsdpfowywgbsx Ampjk Weight approx.: 19 t

Condition: used, A versatile horizontal end borer that can be used for a variety of drilling operations in solid wood furniture components. Optionally the machine can be equipped with a tilting table. -3hp motor - 2800rpm -Drilling unit advancement via hydrocheck unit. -Drilling head with 5 drills which can be rotated through 360 degrees. -Drill interaxis 3 x 32mm ctres / 3 x 20mm ctres. -Max drilling depth 70mm. -Drill connection M10 -Height of drill head and drilling depth adjustable via screws with Siko mechanical digital readouts. Psdpfx Aoymnk Njmpegk -Table with adjustable reference fence adjustable to 45 degrees with pneumatic workpiece clamp. -CE safety protections

Condition: used, This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system. Capacity: 2000 bottles per hour Pgjdpfx Amsy E Ihaepsk Aluminium Cutting: Fords systems Format: 1 Pint Milk Bottles Sealing Device: Included Construction: Fully Stainless steel on product connection Parts Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over Collection Table: Included Condition: Will be fully refurbished or As is

Condition: excellent (used), Year of construction: 2022, Tamutom 1 ton in 24 hour flaked ice machine with holding bin Pgodjy E Irxopfx Ampsk

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys Pgodpfx Aovpaubsmpok 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Pgjdpfoynrzbsx Ampok Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately

Condition: new, all stainless steel turn table new diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) Pgjdpfx Amjytn Nxepsk 1 speed (3 rpm) 0,12 kW also available with variable speed

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Pjdpfxju Thhrj Ampsgk Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Pgjdpfxsx Dnb Ue Ampok Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Pgjdpfx Asx A U Ncompok Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Electric oven with 8-level proofer Dimensions without stand (WxDxH): 780 x 1030 x 2100 mm Dimensions with stand (WxDxH): 780 x 1030 x 2400 mm Oven -Model: RS10A20-1 -10 levels -Tray size: 400x600 mm -Power: 18.6 kW -Voltage: 3x400V + N + PE / 50Hz -Serial number: 10NL C0143 Proofer RE16A-S Pjdpfx Amoyhfubjpjgk -8 levels -Serial number: ETNL C0093 -Power: 1.2 kW -Voltage: 1x240V+PE / 50Hz -Refurbished equipment: Equipment is prepared upon order, pick-up and return times are agreed at that moment (price after refurbishment - please request a quote)

Condition: used, mileage: 190,000 km, power: 110 kW (149.56 HP), first registration: 11/2015, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,500 mm, Equipment: ABS, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales consultant. Attention! Preferential sale to business customers. Internal ID number: [3324] ---Optional available: * 12–64 months warranty (valid EU-wide) * New inspection * New MOT & emissions test * Nationwide delivery * Financing available, even without down payment * Spring offer: Upon request and for a surcharge of only €999, towing capacity can be increased up to 3,500 kg (vehicle and manufacturer dependent). ---Vehicle highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Ready for immediate use * Maxi version * High roof + long wheelbase * Reversing camera * Bluetooth multimedia system * 3 seats Special equipment: Reinforced rear suspension, Look package, radio preparation, 4 speakers Other features: Driver’s airbag, exterior mirrors with wide-angle, integrated indicators, coloured, brake assist, vehicle without start/stop system, rear wing doors (opening angle 180 degrees), bodywork: standard high-capacity van, padded headrests, fuel tank: 90 ltr., partition wall in loading area, height-adjustable steering column, engine 2.2 litre – 110 kW HDi FAP CAT, wheelbase 4,035 mm, spare wheel with regular tyres, low-emission according to Euro 5, sliding door right side (load/passenger area), SCR system (AdBlue technology), side protection strips, seat upholstery: fabric, cab seats: passenger double seat, cab seats: driver’s seat with lumbar support, gross vehicle weight 3.5 t ---Interested in leasing or financing? We offer attractive terms – also possible without a down payment! Just get in touch. Contact: Telephone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ---Note: All information published online is non-binding and serves solely for general vehicle description. Errors, typos, and prior sale reserved. Binding specifications are defined exclusively in the purchase contract on site or by written confirmation. Podpfoy Hzw Dex Ampogk Vehicles with mileage above 50,000 km or older than 3 years are preferably sold to our business customers.