Used Amtec Mhw 14Hd 25-Pt for sale (17,074)

Condition: good (used), Grinding range 400x250x375mm Wheel diameter 300mm Magnetic plate 400x250mm Itsdefbx Dwjpfx Amieg MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Ijdpfx Amovhctwoiotg Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: good (used), Year of construction: 2000, functionality: fully functional, Sawmill Line Equipment for Sale We are offering for sale part of a sawmill production line (the EWD band saw has already been sold). The following equipment is available: - Complete conveyor systems - Esterer edging saw (year of manufacture: 2000) - Multi-rip saw (250 kW German motor, year of manufacture: 1992) - SDOP 600/3 drum chipper (year of manufacture: 2010) - Full conveyor system for sorting sawdust and offcuts into the chipper Itjdpfx Aeyyv Udemisg The line has been in operation until 02/2026 and is fully functional. ✔ Available as a complete set or as individual machines. For more information, please contact us via email or WhatsApp.

Condition: ready for operation (used), A fully automatic cellophane wrapping machine is available. Packaging capacity: approx. 65cycles/min, folding box length range: 40mm-120mm, folding box width range: 40mm-120mm, folding box height range: 20mm-75mm, film types: PP/BOPP, machine dimensions X/Y/Z: approx. 1550mm/850mm/2200mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Iodpfjxn Aaasx Amijtg

Condition: used, Year of construction: 1997, functionality: fully functional, Brand: LARENN - France Model: 250BEL Manual vertical panel saw for cutting wood panels, plywood, furniture, composite materials. Technical features: - Extremely stable motor column - Compact, vibration-free saw group - Integrated strip stop for repetitive cuts - Easy blade unit rotation - Support for small panels - Reference stops Technical data: - Cutting dimensions: 5,300 x 2,200 mm - Cutting depth: 60 mm - Blade speed: 5,400 rpm - Motor power: 3 kW (4 HP) - Suction diameter: 100 mm - Overall assembled machine dimensions: 6,400 x 2,950 mm - Weight: 895 kg Also available: SAMCO circular saw with scorer and tilting blade up to 45° Cutting length on carriage: 1,600 mm Cutting height: 100 mm Itedpeydpx Ajfx Amieg PRICE: 1,800 euros

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS Itjdsv Tp D Hspfx Amiog - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Electric motor, E-motor VEM Three-phase motor, heavy current motor Model: IE3-W41R 250M 2 LL TPM HW Mounting: B3 Itodpoxuk Ilefx Amijg Frame size: 250M Motor power: 55 kW Motor speed: 2970 rpm Current draw: 92 amps Mains connection: 400 volts, 50 Hz Shaft diameter: Ø 60 mm Shaft journal length: 155 mm Keyway width in shaft: 18 mm - Foot-mounted motor with 4 mounting holes Ø 24 mm, hole spacing 400 x 350 mm Motor housing length without shaft: 780 mm Motor housing length with shaft: 930 mm Space requirement L x W x H: 730 x 400 x 520 mm Net weight: 510 kg Good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 44,500 h, laser source model: CV5000, TECHNICAL DETAILS Laser: CV5000 MACHINE DETAILS Ijdsx Hfcqepfx Amistg Operating hours: 44,500 h Note: Information regarding the machine's layout can be found in the attached document.

Condition: used, machine/vehicle number: 16858, Year of construction: 2018, load capacity: 2,000 kg, lifting height: 150 mm, construction height: 1,500 mm, fork length: 2,500 mm, overall weight: 139 kg, enginetype: None, manufacturer: Schefer Itodoyi Naqjpfx Amieg

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and stamping, powered through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structure. CRONOSSTECH CEHP-TB-250 – H-Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Isdpfox N Sc Ajx Amietg Key Advantages: - Stable operation with large dies enabled by the 1200×1000 mm table size - Die/equipment protection via hydraulic overload protection - Controlled and user-friendly operation with PLC + touch screen - High operator safety with light curtain (photoelectric guard) - Low maintenance requirement thanks to automatic lubrication system Application Areas: - Punching / cutting / stamping operations - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balanced piston in ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric guard) • Enclosed gear group in lubricating oil bath • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of the bed • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table–ram distance: 500 mm Clearance between columns: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are handled directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 125 t, stroke length: 200 mm, table width: 750 mm, table length: 1,100 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical presses used in cold forming operations such as punching, cutting, and die forming, operating with force generated via an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process security thanks to their rigid frame design. The CRONOSSTECH CEHP-TB-125 – 125 Ton H Type Eccentric Press is designed for stable operation in high-volume production, with a focus on die protection and operator safety. With a monoblock body, 8-point slide guide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production environments. Key Advantages - Stable and repeatable production with 1100×750 mm table size - Die/equipment protection with hydraulic overload safeguard - Controlled and user-friendly operation via PLC + touchscreen interface - High operator safety with light curtain protection - Low maintenance requirement with automatic lubrication system Applications - Punching/cutting/forming operations - Serial production with automatic feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • Additional T-slotted plate • 8-point slide guide • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety sensor • Enclosed gear group in oil reservoir • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap disposal systems • Sliding safety cover at the table front • Custom die specifications Ijdpfxsx N R U Re Amietg ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-125) Capacity: 125 Ton Table-Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 100 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4500 mm Table Size: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 18.5 kW Weight: 14,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker) with roller conveyor for product out feed. Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.2kW; compressed air not necessary; max. speed of the machine in neutral: 17 cycles/minute; max. product dimensions (mm): L450xW300xH200; max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1400xW870xH1080; weight (net/gross): 150/220kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Isdev Nlzaepfx Amiotg

Condition: new, Year of construction: 2025, Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker). Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.0kW; compressed air not necessary; max. speed of the machine in neutral: 8 cycles/minute; max. product dimensions (mm): L450xW300xH200; max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1380xW690xH1065; weight (net/gross): 125/175kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Iodpjv Nly Nsfx Amiotg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Iedpfx Asxl Rf Semistg

Year of construction: 2006, condition: excellent (used), Description to follow! Iedpfx Aexy S Ecomistg

Year of construction: 2023, condition: new, Semi-automatic auger filler for 100-5000g. Suitable for dosing and filling powdery products. Stand-alone version including screw conveyor and storage container. Also included are: horizontal screw conveyor to prevent undesired trickling, dust removal preparation, PLC control and touch monitor, weighing sensor (works automatically with each dose), bag clip mechanism, screw conveyor for 500 and 2000g doses, lid for screw conveyor so it is closed. Suitable for filling into bags, cans, glasses, other containers. - Specifications auger filler: hopper volume: 50 litres; filling weight: 10-5000g (change of dosing screws required); stainless steel version AISI 304; servo motor; packaging accuracy: 1-2% (depending on product and total weight); max. speed of the machine in neutral: 50/minute; current: 1.5kW, 3P, 380V; machine dimensions: L600xW800xH1000mm; weight: 100kg. The screw conveyor has a stainless steel AISI 304 body with stainless steel pipe. The feed hopper holds 230 litres and is equipped with a vibration motor for uniform product flow. - Specifications screw conveyor: Conveying capacity depending on product: up to 3 m³/h; standard angle: 45° (can be customized 30-60°); pipe diameter: 141mm; power: 1P, 380V, 3kW; machine dimensions: size depends on the customized end system (hopper, conveying length and angle can be adjusted); weight: approx. 150kg. The drawing just shows the auger filler. Itjdpfx Aegzp Ekemieg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2023, PRO-version automatic side sealer, suitable for products without any length restriction. Sealing position (where the sealing bar and the counterpart meet) adjustable in height for a centrally positioned sealing seam. Quick change perforating pins. Ideal to be combined with AMTEC SHRINKtunnel POF-XXXL (high speed) PRO-version. Touch screen for control and setting, easy to operate. Easy film reloading near floor. Optional available: stacker systems for shrink wrapped panels, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; max. package size: L(300- unlimited)xW(200-1000)xH(10-180) mm; sealing blade width: 1140mm; 220V/5.5kW; 6bar; machine dimensions: L2995xW2870xH1485mm. Isdpfx Ajgzqntomistg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, For sale is an AMTEC welding and shrink machine, model MAXIshrink W20XL ECO, year of manufacture 2015. The machine is made of robust metal and designed for professional packaging applications. The well-maintained overall condition is clearly visible in the photos. The device appears to have seen little use and shows only minor signs of wear. The machine features: - large working area with film holder - adjustable transport and feed rollers - user-friendly control panel with regulators for sealing time and feeding length Iodsx Nacwjpfx Amijtg - sturdy hood with sealing frame - CE marking Manufacturer: BluePack Machines GmbH, Reinbek All components are fully assembled. No additional setup or dismantling is required. The machine will be delivered ready for operation.

Condition: new, Year of construction: 2025, Automatic feeding system for cans, glasses, bottles. Separation of single containers and automatic orientation to the conveyor of filling station. - Specifications: Speed: up to 80 containers/min; diameter of table: 1.000mm; 380V, 0,18kW; machine weight: 50kg; dimensions: L1400xW1200xH1200mm. Iodpfx Asv Nk Hhomietg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 20-80mm; bottle height: max. 120mm; sorting speed: max. 100 bottles/min; compressed air: 5bar; power: 220V, 0.6kW; machine dimensions: L950xW950xH1000mm. Optional: different unscramble trays for different bottle sizes. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Itodpfxev Nk Hne Amisg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Feeding system for smaller quantities of free flowing products (rice, sugar, beans, etc.). Stainless steel with large feeding container (60 liter). The container is filled manually in the bottom position. In the top position it will be emptied automatically (complete zyklus: 1 minute). Suitable as infeed system for smaller Volumetric-Cup- or small 2- and 4-head-systems. - Specifications: max. height: 3-5m; machine dimensions: L1400xW700xH3500mm; 220V, 1kW. Ijdpfx Asv Nmnhsmietg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Auger Filler with weight feedback (after the dosing process has been completed) via connected weigher. Automatic version with link belt conveyor for transport of cans, jars, containers. Suitable for dosing and filling powdery products into cans, jars, or other controlled with touch screen for operating. Equipped with servo motor for the dosing auger, level sensor, filling head height adjuster, dustproof cover. - Specifications: dosing range: 1-1000g; accuracy (depending on product and total weight): 1-100g max. ±2%, 100-1000g max. ±1%; max. speed of the machine in neutral: 25 cycles/minute; hopper volume: 25L (standard), 35L (on request); power supply: AC220~380V, 3-phase; power consumption: 1.2kW; compressed air and compressed air consumption: 0.6MPa, 0.5m³/min; machine dimensions: L1500xW760xH1850mm; weight: 160kg. Itsdpfew D Elaox Amijg

Condition: new, Year of construction: 2025, Auger Filler with weight feedback (after the dosing process has been completed) via connected weigher. Automatic version with link belt conveyor for transport of cans, jars, containers. Suitable for dosing and filling powdery products into cans, jars, or other containers. PLC controlled with touch screen for operating. Equipped with servo motor for the dosing auger, level sensor, filling head height adjuster, dustproof cover. - Specifications: dosing range: 10-5000g (change of dosing auger necessary); accuracy (depending on product and total weight): 1-100g max. ±2%, 100-500g max. ±1%, 500g-5000g; max. ±0.5%; max. speed of the machine in neutral: 25 cycles/minute; hopper volume: 50L (standard), 70L (on request); power supply: AC220~380V, 3-phase; power consumption: 1.6kW; compressed air and compressed air consumption: 0.6MPa, 0.5m³/min; machine dimensions: L2000xW970xH2030mm; weight: 300kg. Itodew D Elgspfx Amisg

Condition: new, Year of construction: 2025, Fully automatic cardboard box former for more efficient packing processes. The cartons are automatically removed, built up and taped at the bottom (in only one direction). The constructed boxes will then feed out to a collecting table to fill. - Specifications: PLC and touch screen by SIEMENS; size of boxes in mm: L(250-450)xW(150-400)xH(100-400); max. speed of the machine in neutral: 12 cycles/minute; power: 110/220V, 0.3kW; compressed air: 5-6bar, 0.4m³/min; tape width in mm: 48/60/75; machine dimensions and weight: L2300xW1900xH17000mm, 650kg. Itjdpfx Amev Nkvpsieg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Carton Box Filling and Sealing Machine for e.g. filling of tubes in carton boxes, 1 item each. The fully automatic packaging process includes feeding of the products, erecting of the folding boxes, insertion of the product, closing and out feeding of the box.- Specifications: Dimensions of the folding box: L(55-220)xW(20-120)xH(12-70)mm; requirement carton/paper thickness of the box (min-max): 250-350g/m²; max. cycle of the machine in neutral: 80 cycles/min; power supply: 220V, 3P; compressed air and compressed air consumption: 5-7bar, 0,2m³; dimensions of the machine LxWxH: 3100x1100x1550mm; weight: 1200kg. Iedsv Nkwtspfx Amijtg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.