Used Airloc Fixators for sale (135)

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm Spindle speeds: 50 - 2,000 rpm Spindle torque: 3,000 Nm Spindle taper: SK 50 Feed rate - X / Y / Z axis: 2 - 2,000 mm/min Rapid traverse - X / Y / Z axis: 7,000 mm/min Table clamping surface: 2,000 x 800 mm Rotary table diameter: 800 mm Number of tool magazine stations: 56 Tool diameter (all stations filled): 114 mm Tool diameter (with 2 free positions): 200 mm Max. tool length: 400 mm Max. tool weight: 16 kg Tool change time: approx. 8 - 9 sec Control system: SIEMENS SINUMERIK 850 M Dedpfoyl U Thjx Acqjkr MACHINE DETAILS Spindle motor power: 30 kW Dimensions & Weight Dimensions (L x W x H): approx. 6.6 x 3.15 x 2.98 m Machine weight: approx. 25.4 t EQUIPMENT Tool presetting device Various tool holders Chip conveyor Internal coolant supply Coolant system with high-pressure pump and filtration unit Electronic handwheel Fixators

Condition: used, load capacity 7,700 kg can be screwed-on with insulation plate B4 construction height 63 mm in middle position adjustment range +4 / -6 mm dimensions 200 x 200 mm internal thread M20 Dedpfx Acofii Dpjqskr weight 9.5 kg - new - unused - 6 units on stock price per unit  

Condition: as good as new (ex-display), functionality: fully functional, The ibg Ring Tester Large is engineered for automated crack inspection of bearing inner and outer rings with diameters ranging from 45 to 100 mm. The system conducts a structural analysis, followed by a line-scan inspection of the raceways as well as the inner and outer diameters, utilizing the eddyvisor C. After inspection, components are automatically classified and sorted as either OK or NOK. The testing unit is mounted on a durable metal frame designed for industrial manufacturing settings, featuring integrated compartments for the steel enclosures that house the measuring equipment and PLC (including Siemens PLC). Clean, upright components are separated, fed into a transport wheel, and accelerated into rotation via belts. At the inspection station, adjustable rollers provide lateral fixation while probes perform surface defect detection; thereafter, components are automatically sorted into OK and NOK. Prior to testing, rings must be free of particles and residual liquids. The system follows ibg’s good-part-only policy, with NOK samples reserved exclusively for checking detection sensitivity during test runs. Infeed height: 1550 mm; discharge height: 1220 mm. Dkjdpfx Acsy H Dkaoqer For further information, please visit our website.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for Dkodpfx Asd Ih H Njcqsr two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: ready for operation (used), Year of construction: 2018, A custom-built wide brush ferrule mounting stapling machine for mounting the brush ferrule onto the handle and for mechanical fixation by staples is available. Stapling units top/bottom: 1/1, brush widths: 25mm/50mm/75mm/100mm, additional brush sizes: 35mm/60mm. Documentation available. An on-site inspection is possible. Dkodpfeyr Rw Aox Acqsr

Condition: new, Year of construction: 2025, Modern, high-performance, and universal double miter saw for wood, aluminum, and plastic profiles. Stock machine: Subject to prior sale • Large cutting capacity (165 mm cutting depth at the table) • Double cut possible • Stepless fixation of intermediate angles • Pneumatic swivel function as standard • Infinitely adjustable hydropneumatic saw feed • Torsion-resistant machine bed • Swivel range for both units: 22.5° inward, 90°, 135° outward Dksdpfx Acsxta Tuoqjr • Precision-ground saw table / base plate • Direct position measurement system (magnetic sensor) available in all versions • JETTER drives and controls • 15″ industrial touch panel (IP65)

Condition: new, Description: High precision and stability for the highest cutting quality Smooth belt running thanks to balanced flywheels with rubber coating Adjustable HSS precision three-roller guide for the saw blade top and bottom for exact cutting results Two cutting speeds for different applications and materials Precise parallel stop with double clamping and quick fixation Quiet induction motor, maintenance-free and robust Restart protection: prevents unintentional start-up after a power failure Convenient tilt adjustment of the gray cast iron saw table for precise tilt cuts thanks to gear rim guide Quick release lever and tool-free door opening for easy saw blade changes Blade tension indicator with scale for checking the blade tension Tool-free height adjustment of the saw blade guard LED work light to illuminate the interface External suction possible for low-dust work Drawer for easy disposal of the collected sawdust Extendable table extension for safe processing of large Workpieces Cutting radii with circular cutting device (accessory) Regrinding surfaces and curved saw cuts with belt grinding device (accessory) Base frame with wheels for comfortable position changes Dkodpfx Asvwf Naocqjr Technical data: Dimensions: 665 x 980 x 1600 mm Support surface: 560 x 400 mm Working height with base frame: 1000 mm Saw table swivel range: 0 - 45 ° Cutting height: 170 mm Passage width: 307 mm Cutting speed: 410 / 880 m/min Saw band length: 2240 mm Nominal input power: 900 W Output power: 660 W Weight: 79 kg Scope of delivery: Band saw BAS 318 Precision DNB Universal band saw blade A6 Base frame Parallel stop Angle stop Extraction adapter (for Ø 44, 58, 100 mm) Dust container Push stick

Condition: new, - new -manufactured by Holzkrafttype HBS 633 S SETDescription:- Heavy profile design with high dead weightFor maximum running- Quiet and precise running thanks to torsion-freeMachine housing- Large-scale gray cast saw tableOne piece, tiltable from 0 ° to + 45 ° withPolished and polished surface- Large cast parallel connection- Quick and precise cutting height adjustmentHand wheel and rack with millimeter scale- Standard with angle stop- Precision 3-roll saw blade guide with guide rollersTop and bottom, with fine adjustment- Eccentric quick-release lever. The basic voltage settingIs not altered, with integrated blade-voltage indication- The saw table is mounted on a double tilt support,Easy and fast fixation of the setTilt angle over fast tension- Eccentric quick-release lever- The basic voltage setting is not changed- With integrated saw band tension indicator- The massive saw blade made of gray cast iron is light and comfortableVia a handwheel rack and pinion guide- The inclination is infinitely adjustable from 0 ° to 45 °- Easy and fast fixing of the adjusted tilt anglequick releaseTechnical specifications:Working table dimensions 830 x 600 mmCutting speeds 1615 m / minFlywheel Ø 630 mmMax. Cutting height 400 mmMax. Cutting width with stop 570 mmMax. Cutting width without stop 610 mmBand saw blade length 4600 mmPrecision guide up / downSawing table inclination 0 to +45 °Motor power 400 V / 50 Hz / P2 3.75 kWWeight 380 kgDimensions 1190 x 750 x 2060 mmSuction nozzle diameter 2 x 100 mmItem No. 5156303SETlocated in 97447 Gerolzhofen- free on truck - Dedpfx Acsvwf Tlsqokr

Condition: used, Year of construction: 2001, functionality: fully functional, NC rotary table Fibro 10.36.8 with face gear, year 2001 well maintained, very good condition, little used Pitch 120 teeth +/- 1" With hydraulic locking via face gearing, table top does not lift off Rotary table height 380 mm with substructure height 245 mm (total height 625 mm) Table size Ø 1180 mm Top table plate Ø 1300 mm, Table load approx. 5000 kg Table surface smooth, with dirt grooves with Siemens servo drive 1FT6105-8WF71-4EG2 and bevel gearbox Table speed max. 20 rpm with bevel gearboxes itot = 72 Dkodpfxsyg N Hro Acqer Tangential torque with motor operation 7200 Nm Total weight 3.800 kg without fixators, without installation and commissioning

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: F39033, KEKEISEN Universal Bed Milling Machine UBF 2000/13, machine no. F39033; well maintained, very good condition, mechanically partly overhauled in 2025 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Dsdpfsykuxhsx Acqskr Longitudinal travel of the table (X-axis) 2000 mm Transverse travel of the headstock (Y-axis) 1000 mm Vertical travel of the headstock (Z-axis) 1300 mm Machine table size 2200 x 960 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 5000 kg Spindle power 30 kW (100%ED), max. torque 1180 Nm Spindle speed 20 - 3800 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 10 m/min rapid traverse CNC control Heidenhain TNC 426 CA with electric handwheel HR 330 Drive system make Baumüller Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 200 litre collecting tank Tool changer for 30 tools Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 55 kVA without installation elements (fixators),

Condition: good (used), Year of construction: 1994, KEKEISEN Universal moving column milling machine UFF 6000/15, YOP 1994, machine-no. F37642, well maintained, good condition 2-axis automatic universal milling head with autom. positioning in 1°-positions tool holder SK50 according to DIN 69871/872 form B Longitudinal travel of the column (X-axis) 6000 mm Vertical travel of the headstock (Z-axis) 1500 mm Transverse travel of the headstock (Y-axis) 1200 mm Table size 6200 x 840 mm, table load 8000 kg Table surface with T-slots 22 mm, spacing 140 mm Spindle speed 20 - 2000 rpm (infinitely variable in 2 ranges) Axis speeds 4 m/min or 10 m/min (rapid traverse) CNC control Heidenhain TNC 415 with electr. handwheel HR130 Dedpfx Acjnuda Aoqskr Complete 2nd user interface on the operator's platform that travels with the machine 3D touch probe m&h radio-controlled Tool changer 40 places max. Ø 250 mm, max. 400 mm long Coolant unit (also IKZ, max. 10bar) with 800 l tank + drum filter cladding of the machine table, with chip conveyor between bed and table without fixators, without installation and commissioning Connection data 400 V; 50 Hz; approx. 57 kVA Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Dksdpfxsu Dnrue Acqer Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SCK 60 0 0 00 10 318 98 5, empty load weight: 680 kg, maximum load weight: 2,820 kg, overall weight: 3,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 07/2001, next inspection (TÜV): 03/2028, suspension: steel, tire condition: 85 %, maximum speed: 100 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2001, operating hours: 300 h, Equipment: trailer coupling, from the vehicle registration document "permissible drawbar load, kingpin load or axle load in compliance with the total weight: drawbar load 150 kg, 1st axle 1750 kg, 2nd axle 1750 kg, tandem axle 3500 kg" 2 movable ramps; non-slip birch plywood floor; threaded support wheel; overrun brake; manual cable winch; rear fog light; 8 lashing hooks; 4 recessed, folding lashing rings; 2 wheel chocks; Djdpfx Acoyvul Tjqokr Extra: 2 motorcycle mountings with screw fixation

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 2,700 kg, total height: 560 mm, total width: 2,200 mm, total length: 5,600 mm, Repair frame, professional sheet metal plate TM-GROUP B700 4 TON ⭐️COMPLETE WITH A SET OF NECESSARY ACCESSORIES⭐️ Sheet metal plate specification: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 3.6 tons ✅ Power supply: hydraulic power ✅ High quality hydraulic pump ✅ Max hydraulic pressure: 70 Mpa ✅ Frame length: 5600 mm ✅ Frame width: 2200 mm ✅ Frame height: 520 mm ✅ Plate thickness: 12 mm ✅ Compressed air pressure: 0.8 MPa ✅ Maximum pulling force: 100 kN ✅ Working range of the tower column: 360 ° ✅ Lifting range of the lifter: 680 mm - 1950 mm ✅ Solid and easy car attachment ✅ Frame includes a scissor lift ✅ Universal for all post-accident repairs - The platform is solid and its panel is created in one process thanks to precise CNC cutting - without deformation and with smooth edges. - All elements are shot-blasted, which eliminates welding stress, strengthens the surface and improves paint adhesion. - The platform is made of high-quality steel sheet, welded in a CO₂ shield, which ensures its strength and rigidity. It has numerous process holes and an ergonomically placed anchoring mechanism. - The tower rotates 360 °, works smoothly and precisely. The cylinder works vertically, providing high force and accuracy. - The hydraulic system is characterized by high power, durability and low failure rate. - Optional high-precision measuring systems are available, containing data on car bodies and instructions for easy vehicle maintenance. - The strong chain (T8) and 45# forged tools are versatile, comfortable and durable. - Reinforcing elements such as the tower guide ring and the base of the equipment are made of a single casting, which ensures even distribution of forces and resistance to deformation. - The equipment allows for precise vehicle fixation, and additional accessories are available for brands such as Mercedes-Benz, BMW, Volvo, Renault and others. ⭐️Scissor lift included!⭐️ Jack specifications: ✅ Maximum weight: 3000 kg. ✅ Maximum height: 950 mm. ✅ Minimum height: 185 mm. ✅ Maximum external dimensions: 2060-1050 mm. ✅ Jack lifting range: 680 mm - 1950 mm. Dkodpfx Aevx N E Uecqor ✅ Power supply voltage: 110 V/220 V-S0 Hz. ✅ Device weight: 400 kg. - Equipped with a small trailer that allows easy transport of the lift. - The armrest is flexible, and there are three types of supports available, allowing it to be set at different heights. - Self-locking safety device, unique design, simple operation, safety and reliability. - Suitable for dismantling tires and repairing chassis of small and medium-sized delivery vans and passenger cars. ‼️ IT IS POSSIBLE TO PURCHASE A FRAME WITH A DIFFERENT NUMBER OF DOZERS / TOWERS ‼️

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h Dkedpfx Acstva Sgjqor

Year of construction: 2007, condition: used, The MOTOMAN welding line is in good condition and has only worked about 100 working hours. Such a set is mostly used in the production of agricultural machinery – trailers, frames, axles. Made to order or assembled from standard products (except portal). The automatic welding station consists of: Station – HD Gantry HP6/EA1400N Positioner – HSB -10000SX Control unit – NX 100 Welding: Arc welding. MIG/MAG welding. Possibility of pulse cooking. Djdpfx Acjm Uc Igsqokr The thickness of the wire used is 1 – 1.2 mm. The minimum seam height is 3mm. Maximum wire feed speed 25 m/min. Welding handle cooling function. Laser tracking: Seam search using laser sensors. It is used when changing the position of the seam. Possible deviation from the position of 5 mm. Increase in welding time by 30% and more (depending on the product). Seam fixation at min. 3mm for drop. Positioning: Positioner – HSB-10000SX The carrying capacity of the positioner is 10,000 kg The positioning accuracy of the robot arm is 0.0001 mm Dimensions of welded parts: Height/width – up to 3000 mm (including mounting hardware). Length – up to 6500 mm (including mounting equipment). Maximum weight – up to 3500 kg (limited by lifting equipment). Specifics of the parts that can be welded: Batches of high precision coupling parts. Long weld length. Large metal thicknesses min. 5 mm. Rigid product construction. When a consistent high-quality weld is required. High bending tolerance of parts. High tolerance of overall dimensions of parts. Welding inside the part – depth 110 mm. If you have more questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Dkedpfxjwmxmvs Acqor Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: used, Year of construction: 2008, working width: 800 mm, Grinding machines TimeSavers are designed for surface processing of parts up to 800 mm wide. Product fixation - vacuum. The machine is equipped with 2 stations: abrasive belt / brush. The equipment is suitable for grinding, edge rounding, oxidation and slag removal, final grinding. Technical specification: Model: Timesavers 41 series 900 WRD Year: 2008 Max. part width: 900 mm Max. part height: 80 mm Min. part height: 15 mm Speed: 1 - 10 m / min (adjustable) Dkedsvyhttspfx Acqjr CNC controller: adjustable speed, part dimensions, grinding pressure and more. Other: heater, can work in cold conditions If you have more questions, we will be happy to answer.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1024JT05VL, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, working range: 2,000 mm, overall weight: 19 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 500 rpm, throat depth: 2,000 mm, table height: 870 mm, table width: 800 mm, table length: 600 mm, Equipment: documentation/manual, VOLUMEC JoyTap 3150 - Thread cutting unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for Joytap - Supportive control for thread cutting 1. NEW ALUMINUM STRUCTURE developed with EXCLUSIVE Volumec profile, which provides greater rigidity and precision compared to other models 2. Improved articulated arm mechanics for more smoothness and power 3. NEW GENERATION BRUSHLESS MOTOR (G2) with unmatched performance and reliability 4. INTEGRATED WIRING that does not limit mobility 5. VASTC TOUCH PANEL, the most advanced device on the market for screwing and thread cutting, updated with new functions and programmable torque (Nm) 6. MULTIDIRECTIONAL HEAD with automatic fixation 0-90° workpiece orientation 7. QUICK-CHANGE COUPLING SPINDLE THREAD CUTTING: • AUTOMATIC THREAD CUTTING (setting of pitch - depth - speed - torque Nm to protect the tools) • THREAD CUTTING with PROGRAMMABLE chip breakage • MANUAL THREAD CUTTING (set speed - torque (Nm) to protect the tools) Dsdpfx Acovr U Unoqjkr • THREAD COUNTING is carried out • PROGRAM MEMORY, password protected • Simple PROGRAMMING via INTEGRATED INTERFACE • PROGRAM MEMORY for recurring applications • CONSTANT SPEED AND TORQUE when thread cutting thanks to rotary encoder WORK TABLE: Size: 800x600 Height: 870 30 mm base made of milled steel and T-slots in the inner compartment

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the Dkodpfxsh Ayyqj Acqsr market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: used, Year of construction: 2006, functionality: fully functional, Used Throughfeed CNC Drilling and Panel Processing Center Year of manufacture: 2006 The SCM Morbidelli UNIX NS is an industrial-grade, throughfeed CNC machining center designed for efficient and continuous panel processing. This machine is a reliable solution for high-volume component drilling and automated machining applications. Machine identification Model: Morbidelli UNIX NS Type: Throughfeed CNC drilling and panel processing center Dsdpfx Acoy Iww Nsqskr Manufacturer: SCM Group S.p.A., Italy Serial number: AL/007960 Year of manufacture: 2006 Condition: Used, industrial-grade CNC machining center Main equipment Upper drilling head: 30 vertical spindles (6+2 configuration) Lower drilling head: 30 vertical spindles (6+2 configuration) Throughfeed design with automatic infeed and outfeed Workpiece clamping and feed system with 4 pressure clamps for stable and secure panel fixation PC-Office numerical control with brushless drive technology Short description The machine’s design enables fast, precise, and continuous production, making it an ideal choice for furniture manufacturing and panel sizing applications. Automatic material handling, dual-sided drilling units, and a robust clamping system ensure high productivity and consistent machining quality.

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 Dkodpfx Acsivaryeqjr in good condition, cleaned and checked Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction

Year of construction: 2020, operating hours: 0 h, condition: new, machine/vehicle number: AEBC120, Double-walled boiling kettle. Thanks to the indirect heating system, where heating is made via glycerin heated by electric heaters – there is no need for installation to any pipes, just connect to electricity and you can start working. Indirect heating avoids direct contact of the heater with the cooked dish, which prevents it from burning. The kettle is used in many food industries – vegetable preparation, brewing, meat processing, restaurant, and fast food industry. General Features: The kettle is made from food-grade stainless steel Volume - 120l Dksdpfx Aeffwffocqsr Indirect heating prevents products from burning(products are heated from all kettle sides). Maximal temperature, that can be reached in the product is +120 C degrees. Can be equipped with mixing elements; Easy to clean, can be washed with low-pressure water; Tap for product outlet; Wheels with a fixation for easy transportation. Simple controls and no need for yearly service, only change electric elements when required (because heating is done via glycerin heating elements last very long); For different electrical connections and feel free to ask us;

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: Dkodpfxen Hqmme Acqor As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Dodpfeuzv Tzsx Acqjkr Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).