Used Adsorption Dryer Cold Regenerating for sale (3,010)

Condition: used, Year of construction: 1998, Technical details: total power requirement: 0,16 kw dryer Buran Buran DSM, YOM 1998; capacity 0,16kW, possible pressure 16bar, Filter-Ultramat Typ AG 0009, with internal safety against overpressure - with oil separator Credeu Nzxfspfx Agfsc *

Condition: used, Technical details: shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. Crsdju Nfrcopfx Agfec *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m Codpfx Agsu Nilyofsrc The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Condition: used, Year of construction: 1962, machine/vehicle number: 7188, saw blade diameter: 750 mm, We are offering this used Kaltenbach HDM 750 cold saw, year of manufacture 1962. Type: HDM 750 Machine number: 7188 Crodpfx Agjx T Abdsfjc Hardness of hardened steel at low speed: 60-90 kg/mm² Hardness of mild steel at high speed: ≤60 kg/mm² If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW Crjdpfey Ragfex Agfjc - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: used, Used Buchi model B-290 glass mini spray dryer. Unit rated 1 kg/hour water evaporation capacity at 220°C maximum air inlet temperature. Heating capacity is 2300 W. Drying tower has inner diameter approximately 150 mm x 485 mm height of straight side. Includes nozzle, seperation flask, cyclone, filter. Crjdpfx Ajzbuhkegfjc

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Credpfxsygvnij Agfec

Condition: used, Year of construction: 1990, functionality: unexamined, total length: 1,050 mm, total height: 2,000 mm, total width: 1,800 mm, overall weight: 550 kg, space requirement height: 2,000 mm, space requirement length: 1,050 mm, space requirement width: 1,800 mm, -KOM 3178- Here, we offer a fully automatic metal saw from the manufacturer MEP. The saw is in good optical condition. In addition to the automated operation, the saw can also be operated manually. The maximum clamping width of the workpiece is approximately 150 mm. The recommended saw blade diameter varies, depending on the profile, between 315 and 350 mm. Manufacturer: MEP Type: Tiger 350 AX Total weight: approx. 550 kg Space requirements: Width: approx. 1800 mm Cedpfx Agjyykivjfsrc Height: approx. 2000 mm Depth: approx. 1050 mm

Condition: ready for operation (used), Year of construction: 2012, KASTO U 10 / Metal circular saw with material support Codpfxozakq Eo Agfjrc -CE marking -Year of manufacture 2012 -Cutting range / Round 90 degrees / 100x100mm -Cutting range / Flat 90 degrees / 90x90mm -Cutting range / Square 90 degrees / 170x90mm -Miter cutting device -Coolant system -Vise with counter-tension device for burr-free cutting -Infinitely adjustable saw feed -2 saw cutting speeds -Dimensions of circular saw blade 350x2.5x32mm -Saw motor 1.8 kW Dimensions: L x W x H 1.2 x 0.8 x 1.9 meters / Weight 500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 9,150 mm, inner dimension width: 1,900 mm, inner dimension height: 3,000 mm, number of chambers: 2, Drying chamber with trolleys on rails Credpfx Ajy Sbutegfec 2 trolleys dimensions: 2x 1900*3000*9150 2x 3kW fans Automatically controlled with adjustable drying programs

Condition: used, Year of construction: 1980, - Saw blade diameter: 350–450 mm Cedpjzbrtwofx Agforc - Motor power: 3–7.5 kW - Material feed: approx. 80–120 mm - Weight: 1,000–2,000 kg - Voltage: 380 V three-phase AC (400 V) - Feed mechanism: hydraulic

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product. Cedpfx Ajh A Hbxegforc

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display, digital 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chamber Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and pipe diagram Parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Codpfx Ajy H Hk Ajgfjrc Scope of Supply Test chamber TSS-70/350-A Documentation (if available) Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Crodpfsza Hnmex Agfoc Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant Cjdpfxey Hkgbs Agfjrc 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Crodpfx Agjy Hkd Hofec Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Crodpfx Asy Ra D Dogfec Good condition

Condition: reconditioned (used), Year of construction: 2013, Thermocontainer used; overhauled showing signs of wear Type designation: C-720ü Technical data Interior: 610 x 810 x 1440 mm Outside: 735 x 955 x 1770 mm Weight: approx. 90 kg Content in litres: approx. 720 With slide-in bars for grids Credpfjd Syhasx Agfsc Features Locking in the middle of the door 2 lateral pull handles 1 folding handle in the door recess Trolley with castors 108 mm, PA, cold store safe Door-stay Inner tray with slide-in strips Angular corner supports with bend PE - sheets (2 mm thickness), light blue Profiled deflector plates (3 sides) 2 rigid wheels, 2 mobile wheels, padlockable with padlock Loadable up to approx. 400 kg From company dissolution, REVISED Prices: net per piece plus the currently valid VAT. Fine cleaning is to be carried out by the buyer Auction consists of a container Colour sales depending on stock For time reasons, enquiries regarding this article can only be made to information of a telephone number can be answered. approx. 100 pcs. in stock Article is only offered for self collection. Do you wish a shipping, please contact us in advance by telephone

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Cedpfx Agozap Hfsfsrc

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container Crsdpsv I Akvefx Agfsc - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: new, 400 x 32 mm capacity 90 degrees: round 145 mm capacity 90 degrees: square 130 x130 mm capacity 90 degrees: flat 300 x 80 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 115 x 115 mm capacity 45 degrees: flat 250 x 60 mm total power requirement 1,8 kW weight of the machine ca. 240 kg dimensions of the machine ca. 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice Cjdpfjyv Nhpox Agfsrc - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet

Year of construction: 2006, condition: good (used), Airpress screw compressor with dryer Bar: 10 Cedpfx Agji Eq D Djferc Tank: 200 L Year: 2006

Condition: ready for operation (used), Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS and Pedrazzoli MDB 102 Orbital fully automatic circular saw machine with deburring installation Transport dimensions part 1: 520x210x190 cm (LxWxH) Transport dimensions part 2: 600x230x190 cm (LxWxH) Transport dimensions part 3: 385x150x210 cm (LxWxH) For capacity see table Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in accordance with its age in terms of appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS and Pedrazzoli MDB 102 Orbital fully automatic circular saw machine with deburring installation Transport dimensions part 1: 520x210x190 cm (LxWxH) Transport dimensions part 2: 600x230x190 cm (LxWxH) Transport dimensions part 3: 385x150x210 cm (LxWxH) For capacity see table Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Cedpfx Agsurm Upeforc Pedrazzoli Brown ADB 142, Pedrazzoli Horizon 425 AP 1500 IMS und Pedrazzoli MDB 102 Orbital-Vollautomatik-Kreissägemaschine mit Entgratungsanlage Transport dimensions Teil 1: 520x210x190 cm (LxWxH) Transportmaße Teil 2: 600x230x190 cm (LxWxH) Transport dimensions for unit 3: 385x150x210 cm (LxWxH). Kapazität siehe Tabelle Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: good (used), Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Codpfx Agjy Ti Ecoferc Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Condition: excellent (used), Year of construction: 2014, MEP Cobra 352 MA cold circular saw in very good condition. Year of manufacture: 2014 Crsdpfx Aeyzbmnsgfoc Shipping is possible.