Used 3D Systems Sla Printer for sale (41,886)

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Hsdpfx Aewpkcnjggofn Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SN24027024146, Year of construction: 2024, total length: 580 mm, total height: 910 mm, total width: 700 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Installed nozzle diameter: 0.4 mm MACHINE DETAILS Voltage supply: 100–240 V AC Power consumption: Max. 10 A Mains frequency: 50–60 Hz Hedpezx S Easfx Aggofn Frequency band: 2,400.0–2,483.5 MHz Max. radio frequency output power: < 100 mW EIRP WLAN standard: IEEE 802.11 b/g/n Operating temperature: 18 °C for PLA up to 38 °C Max. humidity: Max. 85 %, non-condensing Dimensions & Weight Dimensions (W x D x H): 580 x 700 x 910 mm Weight with packaging: Max. 35.0 kg Weight without packaging: Max. 25.3 kg EQUIPMENT Satin powder-coated print bed PEI print bed Spool holder with material guide Power cable USB drive 5 × brass nozzle, 0.4 mm 5 × hardened nozzle, 0.6 mm Operating manual Testing information Note: Print head cable 3 must be replaced.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Hfjdpfezv S Rwsx Aggsn Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: excellent (used), functionality: fully functional, Automatic slab storage system (vertical slabs) n. 1 Jot for slab pack composition n. 1 robot for vertical picking/deposition/picking of packs composed by 130 cells of about 10 slabs each. N. 1 Jot for slab pack breakdown length about 50 meters. Hfsdoxxlk Nopfx Aggon

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Hedezdy Iajpfx Aggefn Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Hfjdpfx Aoz Dlalsggon Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: used, 3DGENCE Type: Industry F420 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic exchange system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Hodpfx Aezix Aysggofn Scope of delivery: (See pictures) Weight: 350 kg (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 322276, Year of construction: 2016, operating hours: 1,202 h, total length: 870 mm, total height: 1,200 mm, total width: 735 mm, type of input current: AC, overall weight: 250 kg, feed length X-axis: 255 mm, feed length Y-axis: 252 mm, feed length Z-axis: 200 mm, power: 1.5 kW (2.04 HP), We are offering for sale a Stratasys Objet Eden 260VS PolyJet 3D printer, originally purchased in 2017 and maintained in excellent working condition. The printer has been used in our architectural studio primarily for producing highly detailed architectural models of buildings designed by our office. Because of this specific use, the printer has very low operating hours and has always been handled with great care. The machine has only 1202 total printing hours, which is exceptionally low for this type of professional PolyJet system. Condition: - Fully functional and operational - Very low usage – only 1202 print hours - Maintained in excellent cosmetic and mechanical condition - Operated in a clean professional studio environment - Preventive maintenance performed regularly - Service and maintenance logs available upon request The printer was cleaned before and after every print using Stratasys-approved cleaning fluids and maintained according to the manufacturer’s recommendations. A couple of years ago the printer was properly cleaned and placed into long-term standby/storage mode following the appropriate procedure and has been stored safely since then. During its lifetime the only repair required was the replacement of the vacuum pump, which was carried out at the time and the printer has operated normally since. No other issues have occurred. The sale includes: - Stratasys Objet Eden 260VS PolyJet 3D Printer - Cleaning / washing station with pressure washer - Spare parts and accessories shown in the photos - Maintenance tools - Various filters and replacement components - The printer includes the original Stratasys HASP license dongle with material packages installed. Additional photos and log data can be shared upon request Hfsdpfxsyt Rk Ee Aggon

Condition: excellent (used), Year of construction: 2017, Stratasys 3D Printer PolyJet J750 With the Stratasys J750 3D printer, you can optimize and streamline the process of manufacturing models using various materials on a single build platform within the same print job. During the design phase, you can assign colors to different components of a model. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts, is included. The Stratasys J750 3D printer offers a build volume of 490 mm x 390 mm x 200 mm (19.3 x 15.35 x 7.8 in). AC Power Connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 220–240 VAC, 50–60 Hz, 7 A, single-phase Hfedoyly Auopfx Aggen Technical Details Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input current type: Alternating current (AC) Total weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min): 18 °C Ambient temperature (max): 25 °C Applications - Rapid prototyping - Concept models - Medical models - Tooling and fixtures - Coloured textures

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F421.24213, Year of construction: 2025, operating hours: 430 h, 3DGence INDUSTRY F421 – Excellent Condition Showroom Unit - Only 430 Operating Hours Price: EUR 38,900 net + shipping within the EU We are offering a 3DGence INDUSTRY F421 professional high-temperature industrial 3D printer in excellent condition, with only 430 operating hours. The printer was purchased directly from 3DGence in February 2025, when we were an official 3DGence partner. It has been used very little and is in excellent technical and cosmetic condition. Hjdpfxjzulwuo Aggjfn Key advantages: 3DGence INDUSTRY F421 Only 430 operating hours Purchased directly from 3DGence – February 2025 Still covered by the manufacturer's warranty Full technical support from 3DGence M280 Printing Module included M360 Printing Module included Professional industrial-grade machine for demanding engineering applications Excellent condition Original purchase documentation available Manufacturer support and warranty status can be verified with 3DGence Included: 3DGence INDUSTRY F421 printer M280 Printing Module M360 Printing Module Original equipment and accessories supplied with the machine Documentation Why this machine? The INDUSTRY F421 is designed for professional and industrial applications requiring high-temperature materials and reliable, repeatable production. The included M280 and M360 modules provide flexibility for a broad range of engineering-grade materials and applications. With only 430 operating hours, this machine offers an opportunity to acquire a nearly new F421 at a significantly lower cost than a new system, while retaining the manufacturer's warranty and technical support. The machine is fully operational and can be inspected and tested before purchase. Operating hours: 430 hours Year of purchase: 02/2025 Location: Slovakia / European Union For further technical information, additional photos, documentation, or to arrange an inspection, please contact us.

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. Hfjdswktwkspfx Aggen This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: new, Year of construction: 2026, Technical data: Control system: Multiaxis real-time interpolator with active trajectory prediction, LAN communication, EtherCat protocol, sampling time under 1ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1200 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes equipped with helical, hardened and ground racks, precision class 6; Z axis with ball screw, precision class 5. Linear bearings: Bosch Rexroth 35 Travel speed: X, Y axes up to 45 m/min; C, A axes up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave configuration with gantry angle correction Electrospindle: 8 kW to 36 kW Print heads: - G.12 with throughput up to 12 kg/h - G.20 with throughput up to 20 kg/h - G.50 with throughput up to 50 kg/h - G.200 with throughput up to 200 kg/h Hfodpotz Sgiofx Aggjn Maximum spindle speed: 24,000 rpm (options for 6,000, 40,000, or 50,000 rpm) Construction: Welded, ribbed, stress-relieved, and precision machined steel frame Table type: Vacuum, hybrid, steel T-slot, aluminum T-slot, aluminum vacuum with M16 or M18 holes Optional features: - Tool cooling - Linear or rotary tool magazine - Rotary axis on the table - Laser scanner - Positioning bases - Oscillating unit - 5-axis software package Granulate 3D printers can process a wide range of thermoplastics, such as PLA, ABS, PETG, polyamides, or polypropylene. #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,075 h, total length: 483 mm, total height: 914 mm, total width: 564 mm, overall weight: 48 kg, For sale is an X7 3D printer from Markforged. The printer was used exclusively in a clean environment and is fully functional. Furthermore, the extruder and the print head were replaced recently, upgrading the printer to a Gen2 model. This also enables turbo printing. Hodswhduujpfx Aggefn

Condition: used, Year of construction: 2017, Sieving machine- 2017 Mobile Concept Laser QM Powder With Siemens PLC Powder Handling Unit - Hjdoz N H Atopfx Aggofn

Condition: used, Year of construction: 2018, 3D printer Hfodpfxsvtftqo Aggsn Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W Hedpfszk Ekgjx Aggjfn • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. • High throughput for speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Contact us for more information or inquiries!

Condition: ready for operation (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Internal dimensions of the installation space: approx. 400 × 400 × 500 mm MACHINE DETAILS Hfodpfx Agsz Ilt Hsgsn Operating voltage: 240 V Frequency: 50/60 Hz Rated current: 6–12 A Dimensions & Weight Dimensions (L x W x H): 900 x 800 x 2,000 mm Weight: 500 kg External reference: Alesco - Lot 1

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Hfjdpfx Aswd Ulveggen

Condition: excellent (used), Year of construction: 2013, Stratasys 3D printer Dimension Elite Maximum build volume : 203x203x305mm Size: 686x914x1041 Hfedpfst Dq Rlox Aggsn Weight (kg): 136

Condition: used, Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible. Hodpfxoz R Uxmj Aggsfn

Condition: new, functionality: fully functional, machine/vehicle number: 1325, Year of construction: 2026, Robust, efficient, and user-friendly 3D printer for producing components from resin, rubber, PLA, ABS, PET-G, and other plastics. Operates on three axes (X, Y, Z), enabling the creation of precise, three-dimensional details. 3D Printer 1325 3D Printer STANDARD EQUIPMENT INCLUDES: - Complete control system - Print head - Dryer and granulate feeder - Software Hfedpfexfq Dbsx Aggsn TECHNICAL DATA: - Output from 8 kg/h - Interchangeable nozzles ⌀ 3–12 mm - Air-cooled print head - Compact print head dimensions - Motor power 1.5 kW

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Hfedpexu E Srefx Aggjn Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Fabr. / Serien Nr. 12.16.0072, Year of construction: 2016, operating hours: 6,250 h, total length: 2,000 mm, total height: 1,400 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, input current: 32 A, shaft length: 1,070 mm, temperature: 200 °C, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 10 °C, ambient temperature (max.): 35 °C, electrical fuse: 32 A, table width: 125 mm, tank capacity: 25 l, table length: 125 mm, repeat accuracy: 0.001 mm, Equipment: cooling unit, Manufacturer: SLM Solutions GmbH Type: SLM 125 HL Manufactured / Serial No.: 12.16.0072 Year of manufacture: 2016 Weight: 800 kg Dimensions: Length x Width x Depth in mm (2,000x1,400x1,100) Documentation: yes Accessories: Spare parts such as flanges, pipe sections, substrate plates, coating lips, powder containers or bottles (photos available upon request) Special features: Compressed air 7-8 bar, inert gas (argon or nitrogen) 5 bar and cooling water are required for operation. Used SLM Solutions SLM 125 HL system for processing reactive and non-reactive powder materials. Stainless steel and aluminum (other materials possible) have been processed on this system. Design of process chamber, handling station, and powder extraction system in accordance with ATEX Directive II for flammable materials. Build volume (L x W x H): 125 x 125 x 125 mm (less substrate plate height) Build volume reduction (L x W x H): 50 x 50 x 50 mm (less substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 μm - 75 μm, 1 μm increments Min. feature size: 140 μm Focus diameter: 70 μm - 100 μm Max. scanning speed: 10 m/s Hfedpfjy Uzcisx Aggjn Average protective gas consumption during build process: 0.6 l/min (argon) Average protective gas consumption during flood process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11105234, TECHNICAL DETAILS Maximum load capacity: approx. 37 kg Rated load capacity: approx. 30 kg Maximum reach: approx. 2101 mm Hfjdpeyvzuhjfx Aggjn Position repeatability: 0.05 mm (ISO 9283) Number of axes: 6 Operating ambient temperature: 0 °C - 55 °C (273 K to 328 K) Ambient temperature for storage & transport: -40 °C - 60 °C (233 K to 333 K) Positioner Model: KUKA DKP400 V2 Two-Axis Positioner Electrically insulated faceplate Air chiller Model: Thermo Chiller HRS050-AF-20 MACHINE DETAILS Drive Model: Meltio Engine V2.0 Power: 7.5 kW Frequency: 50/60 Hz Full load current: 22 A 3W + N + PE, 200-240 / 380-415 V, 16A 3W + PE, 200-240 V, 25 A 2W + PE, 200-240 V, 40 A Control Model: KR C5-2, KR C5 Integrated software: Melito Engine Dual Wire & Melito Engine Hot Wire Protection rating: IP65 (IEC 60529) Wrist protection rating: IP65 / IP67 (IEC 60529) Dimensions Overall dimensions (L x W x H): 5,000 x 4,000 x 4,000 mm Sliding door opening dimensions: 2,000 x 3,000 mm EQUIPMENT Laser safety cabin, lightproof 4 controllers in one system Roof closed and removable Note: Images 1 & 2 show the assembled state at the previous operator.

Condition: excellent (used), 3D Metal Printer Manufacturer: CONCEPTLASER Model: M1-2010-01-01 Year of manufacture: 2010 Build volume: 250 x 250 x 275 mm Compressed air: 7 - 8 bar Inert gas: 5 bar Supply voltage: 3/N/PE AC400V +/-10% 50 Hz Materials: CL50WS: 50 kg and CL91REW: 40 kg Equipment: Hfjdpfx Aoxk T Ndjggjn - 1 Rofin fiber laser StarFiber 200 with 200 W - 1 process chamber (can be inertized) - 1 loading station - Nitrogen generator incl. 1000-liter pressure vessel - Conceptlaser automatic sieving station (2 material sets) - Explosion-proof vacuum cleaner Manufacturer: Ruwac, Year: 2023 - Various accessories (filters, seals) - Machine operating hours: 16,620 h - Laser source operating hours: approx. 11,000 h