Used Voumard 5 A for sale (97,152)

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: Hjdpfxsqt Dmys Aatenr - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, functionality: fully functional, mileage: 10 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, color: white, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, sliding door, soot filter, traction control, truck registration, Peugeot Partner Doka Flexcab! Flexible seating configuration: 2-seater, 4-seater, 5-seater—more or less loading area! Truck registration! Mirror monitor, rear camera, automatic climate control, automatic handbrake, etc. Hedjyir Nhepfx Aatjnr We are happy to offer you financing or leasing options. - Immediately available!- German new vehicle from an official Peugeot dealer!

Condition: used, Worm gear, bevel gear Manufacturer: Sew-Eurodrive Type: DFY112ML/TH Output speed: 1400 rpm Torque: 24 Nm Power: 6.6 kW IP65 Voltage: 50 Hz V 230/400v Hnjdpfjudywgex Aatsr Power consumption: A 49.50/16.50 Speed: 3000 rpm Gear ratio (i): 27.88:1 weight: 36 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, Make: BWF, type: SI 6/1 AS-N X710, serial no. 1114, control: Siemens, type 840 Dsl, machining diameter 40-400 mm, machining depth 710 mm, workpiece diameter 500-600 mm, max. workpiece length 1,000 mm, WSTK head swiveling -5/+30°, belt filter system, oil mist filter, make Unifil, retrofit 2011. Hnodpfxsyfii Do Aater

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: Hjdji Apuhopfx Aatsnr - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Year of construction: 2001, condition: excellent (used), For sale: Costa A1 ACT 1150 belt grinder, year 2001. Configuration: soft cylinder with electronic segmented pad. Working width: 1150mm Belt dimensions: 1180x2620mm Pressure rollers for short workpieces. Fan for creating negative pressure, included. Air blast for both units. Hnsdegq U R Nspfx Aatjr Total weight: 2500 kg 2 motors: 7.5 kW and 15 kW Total power: 27 kW Very good condition, machine is regularly serviced. Available immediately.

Condition: used, Technical specifications: Working width: 1150 mm 1 combined unit with pneumatic shoe Pneumatic shoe lift mechanism Paper/air blow-off Support foot before first roller Paper break protection with raised component 6 speeds for the sanding unit Roller diameter: 140 mm Maximum workpiece height: 160 mm Sanding belt dimensions: 1140x1400 mm Feed belt speed: Variable Hnsdpfx Aasx Uz Dyjtsr Extraction port diameter: 160 mm Electric height adjustment Analog display Safety switch Main motor power: 9 and 11 kW Voltage: 380 V Overall dimensions: Length: 1900 mm Width: 2400 mm Height: 2180 mm

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2.102.061, functionality: fully functional, pressing force: 135 t, stroke length: 210 mm, throat depth: 410 mm, controller model: Cybelec CybTouch 8W, working width: 3,100 mm, TECHNICAL DETAILS Press force: 135 t Max. working width: 3,100 mm Hedpjzrmu Nsfx Aatjnr Frame spacing: 2,500 mm Overhang: 410 mm Rear gauge depth: 750 mm Max. stroke: 210 mm Number of axes: 4 (Y1, Y2, X, R) MACHINE DETAILS Control system: Cybelec CybTouch 8W Power: 11 kW Tool holder type: European-style Punch holder: Standard Dimensions & Weight Dimensions (L x W x H): 3,720 × 2,300 × 2,750 mm Shipping weight: 7,700 kg Shipping packages: 1 EQUIPMENT Tools CE marking Documentation

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Hjdozmtlkepfx Aatonr Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: excellent (used), Correa A-20-25 Bed Type Travelling Universal Milling Machine Spindle Speeds 20 - 2000rpm Spindle Taper ISO50 Spindle Motor 15kW Table Size 2500 x 700mm Longitudinal X Axis Travel - 2200mm Vertical Y Axis Travel - 1000mm Cross Ram Z Axis Travel - 1000mm Range of Feeds Inf. Variable 5 - 1500mm/min Rapid Feeds 3000mm/min Overall dims - 3600 (5800) x 2220 (3320) x 2750 (WDH) Weight 9500kgs. *For sale with Jet Machinery Ltd* Stock No: 79042 Serial No: 9210511 Hodpfxezuxrrj Aatenr Price: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Hsdpfjzr Nf Dox Aatonr Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Hodjykqtzepfx Aatenr Tool to tool time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual

Condition: good (used), mileage: 328,389 km, power: 302 kW (410.61 HP), first registration: 01/2017, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 8x2, wheelbase: 5,920 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 11,800 mm, total width: 2,550 mm, total height: 3,800 mm, loading space length: 7,400 mm, loading space width: 2,500 mm, loading space height: 780 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, power mirror, retarder, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Fabric - Central lubrication - Auxiliary braking system Number of axles: 4, Configuration: 8x2, Tare weight: 16685 kg, Gross weight: 34000 kg, Total tank capacity: 400 liters, Fifth wheel coupling: Fixed, Number of differentials: 1, Central lubrication, Suspension type: Air suspension, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Flashing lights, Engine power: 302 kW (405 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Starter battery, Pump, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Hiab 211 EP-5 Hiduo, Crane year: 2016, Crane capacity: 21000, Maximum load: 900 kg at 15 m, Number of support legs: 2, CE-approved, Control position: Right-hand side control, Crane position: At the rear, Hydraulic extension: 5, Rotor, Pallet hook Transmission Transmission: SCA, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 315/80R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm; Suspension: Leaf suspension Axle 2: Tire size: 315/80R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 8 mm; Suspension: Leaf suspension Axle 3: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 15 mm; Tire tread depth left outer: 15 mm; Tire tread depth right inner: 16 mm; Tire tread depth right outer: 16 mm; Suspension: Air suspension Axle 4: Tire size: 385/65R22.5; Lift axle; Steered; Tire tread depth left: 14 mm; Tire tread depth right: 13 mm; Suspension: Air suspension Weights Unladen weight: 16,685 kg Payload: 17,315 kg GVW: 34,000 kg Functional Crane: Hiab 211 EP-5 Hiduo, year 2016, at the rear of the chassis Pump: Yes Maintenance APK (Technical Inspection): valid until 04/2027 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Hnedpfsy Dpi Nex Aatjr Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete stock list: Leasing via Kleyn...

Condition: used, This listing is for the Grant Instruments SUB Aqua 5 Plus Water Bath The unit is in full working condition and is ready for immediate release The Grant SUB Aqua Pro series offers a range of high-quality, unstirred water baths designed for precise temperature control in laboratory applications. These baths are ideal for tasks such as sample incubation, media preparation, and quality control.​ Key Features: Steady boiling via adjustable energy regulator Hnjdpfx Aajxv A N Djtor Constant level device ensures stable operation and liquid consistency Robust, wear-resistant construction for daily lab use Simple, intuitive controls for quick temperature setup Non-drip polycarbonate lid included as standard Ideal For: Continuous boiling applications Industrial and routine lab use High-throughput or budget-conscious environment

Condition: used, functionality: fully functional, mileage: 385,244 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Hnsdpfx Aajzt H Dtotjr Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 351,512 km, power: 331 kW (450.03 HP), first registration: 06/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Hnsdpezt H Dgofx Aater Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 8 mm Front right - 8 mm Rear left inner - 11 mm Rear left outer - 5 mm Rear right inner - 11 mm Rear right outer - 11 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 +Controller +TPU DEMO ROBOT as new Hnsdpexq Tu Tefx Aator DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain Hnedpfx Aaozu A D Eetsr - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: new, Siemens 6EW1160-5AF power supply, internal mounting unit. A 2025254, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hnjdji Edwujpfx Aatjr

Condition: used, functionality: fully functional, mileage: 287,319 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Hodpfeztm I Eex Aatonr Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: excellent (used), mileage: 393,032 km, power: 243 kW (330.39 HP), first registration: 02/2010, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, loading space length: 6,000 mm, loading space width: 2,590 mm, loading space height: 300 mm, Year of construction: 2010, Equipment: crane, = Additional options and accessories = - PTO = Remarks = WDB9506011L449552 = More information = Empty weight: 14.490 kg Carrying capacity: 10.260 kg GVW: 24.750 kg Make of bodywork: HIAB 144BS 2 HIDUO Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Hedpfeymqgysx Aatenr Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2023, functionality: fully functional, QATM Qcut 500 A Precision Cut-Off Machine Manufacturer: QATM / ATM Qness GmbH Type: Qcut 500 A Year of Manufacture: 03/2023 Machine Type: Automatic Metallographic Cut-Off Machine Condition: New / unused Cutting Disc Diameter: up to 508 mm (20") Drive Power: 15 kW S1 For sale is a new and unused QATM Qcut 500 A precision cut-off machine, manufactured in 2023, with extensive equipment, a belt filter system, and an extraction system. The machine is particularly suitable for the precise cutting and sectioning of samples in metallography, material and component testing, quality assurance, research and development, as well as for industrial laboratory and testing applications. The machine is additionally equipped with the option "Laser alignment aid for easy positioning of the workpiece." Technical Data: Manufacturer: QATM / ATM Qness GmbH Type: Qcut 500 A Year of Manufacture: 03/2023 Country of Manufacture: Germany Power Supply: 400 V / 50 Hz Connected Load: 30.0 kVA Fuse Rating: 32 A Drive Power: 15 kW S1 Cutting Disc Diameter: up to 508 mm (20") Speed at Ø 508 mm: 1000 – 2400 rpm Cutting Disc Arbor: Ø 32 / 40 mm Max. Sample Size at Ø 508 mm: 190 mm Max. Sample Weight: approx. 400 kg incl. clamping device Travel X-axis: 420 mm Travel Y-axis: 280 mm Travel Z-axis: 200 mm Positioning Accuracy Z-axis: 0.1 mm Working Speed X-/Y-axis: 0.001 – 50 mm/s Rapid Traverse X-/Y-/Z-axis: 80.0 mm/s Compressed Air Connection: 6 bar (± 2 bar) Noise Emission: max. 62 dB(A) at idle Operating Hours according to Display: 5 h 47 min Software Version: V 4.30 Belt Filter System: Manufacturer: QATM / ATM Qness GmbH Type: Belt Filter Automatic 285 Year of Manufacture: 03/2023 Belt Filter Type: UR 1030 Belt Filter Year of Manufacture: 2022 Rated Voltage: 3 × 400 V / N / PE, 50 / 60 Hz Rated Current: 100 mA Hnedpozt N Rvofx Aatjr Rated Power: 83 VA Dimensions: Machine Dimensions: approx. 1300 × 1820 × 1250 mm (W × H × D) Table Size without Z-axis: 700 × 500 mm Table Size with Z-axis: 550 × 500 mm Table Plate: Stainless Steel T-Slot Width: 12 mm Machine Weight: approx. 1000 kg Equipment: Option: Laser alignment aid for easy positioning of the workpiece Touchscreen control panel X, Y, and Z-axis control Joystick operation Stainless steel work table with T-slots Enclosed work area with viewing window Coolant nozzles QATM Belt Filter Automatic 285 Belt Filter UR 1030 Filter mist extraction system Coolant / filter unit Tools and clamping accessories according to images Piping and connection accessories according to images Operating manuals and documentation according to images Further accessories according to images Transport Data: Machine Weight: approx. 1000 kg Shipping by freight forwarder possible. Condition: New / unused. Year of Manufacture 2023. The machine has not been used in production. Operating hours according to display: only 5 h 47 min. Very well-maintained optical condition according to images. Display and control are shown as functional. Nameplates are present. Scope of Delivery: 1 × QATM Qcut 500 A Cut-Off Machine 1 × QATM Belt Filter Automatic 285 / Belt Filter Unit Filter mist extraction system Laser alignment aid Tools and clamping accessories according to images Piping and connection accessories according to images Operating manuals and documentation according to images Further accessories according to images. Scope of delivery as shown or described. Subject to changes, errors and prior sale.

Condition: excellent (used), mileage: 1,200,000 km, power: 340 kW (462.27 HP), first registration: 07/2012, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,300 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, spoiler, traction control, = Additional Options and Accessories = - 2 bunks - 430-liter diesel tank - 870-liter fuel tank - Aluminum fuel tank - AS-TRONIC transmission - Heated mirrors - Comfort driver's seat - Roof spoiler - Differential lock - Differential lock - Speed limiter - Intarder - Multifunctional steering wheel - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater - ZF intarder = Notes = GOOD CONDITION DAF FTXF105-460 SPACECAB 4x2 TRACTOR UNIT WITH AS-TRONIC GEARBOX / ZF-INTARDER / COMPLETE SPOILER SET ON CABIN & AIR CONDITIONING!! 460 HP, EURO 5!! AS-TRONIC (12 GEARS)!! ZF-INTARDER!! COMPLETE SPOILER SET ON CABIN!! 870 + 430 LITER DIESEL TANK!! AIR CONDITIONING!! SUN VISOR!! ETC!! TRUCK IS IN GOOD CONDITION, READY FOR THE JOB!! MORE DAF CF/XF EURO 2/3/4/5/6 IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR THE FIRST IMPRESSION!! ( / ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: AS-TRONIC (12 GEARS), 12 gears, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7500 kg; Steered; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Leaf suspension Rear axle: Double tires; Differential lock; Max. axle load: 13000 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 8,156 kg Payload: 12,344 kg GVW: 20,500 kg Functional Cargo space volume: 1,300 l Loading platform height: 118 cm Condition Technical condition: very good Optical condition: very good Additional Information Hnodpfxezu Dblj Aater Please contact the Sales Department for further information.

Condition: excellent (used), mileage: 1,100,000 km, power: 340 kW (462.27 HP), first registration: 03/2010, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,300 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2010, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, traction control, = Additional Options and Accessories = - 2 bunks - 430-liter diesel tank - 870-liter fuel tank - Aluminum fuel tank - Heated mirrors - Comfort driver's seat - Differential lock - Differential lock - Speed limiter - Refrigerator under bed - Multifunctional steering wheel - MX engine brake - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Auxiliary heater - ZF16 manual transmission = Notes = GOOD CONDITION DAF FTXF105-460 SUPERSPACECAB 4x2 TRACTOR UNIT WITH ZF16 MANUAL GEARBOX, MX-BRAKE, 870+430 LITER DIESEL TANK & AIR CONDITIONING!! 460HP, EURO 5!! ZF16 GEARS MANUAL GEARBOX!! MX-BRAKE!! 870+430 LITER ALUMINUM DIESEL TANK!! FRIDGE UNDER BED!! AIR CONDITIONING!! COMPLETE SPOILER SET ON CABIN!! SIDE SKIRTS!! SUN VISOR!! COMBI-LIGHTS!! ETC!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY WORK!! MORE DAF CF/XF EURO 2/3/4/5/6 IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE: SHIPMENT, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! WE INVITE YOU TO WATCH OUR COMPANY MOVIE ON YOUTUBE FOR A FIRST IMPRESSION!! ( / ) ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" Hodpfx Aszu A Rfjatjnr = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF16 MANUAL GEARBOX, 16 gears, manual transmission Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 7500 kg; Steered; Tire tread depth left: 90%; Tire tread depth right: 90%; Suspension: Leaf suspension Rear axle: Tire size: 315/70R22.5; Dual tires; Differential lock; Max. axle load: 13000 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 8,870 kg Payload: 10,630 kg GVW: 19,500 kg Functional Load compartment volume: 1,300 l Loading platform height: 120 cm Condition Technical condition: very good Optical condition: very good Further Information Please contact the Sales Department for further information.

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Hedpfxoy Sup Dj Aatsnr Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65