Used Scraping Straightedge for sale (263)

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW Hedpexyaf Rsfx Ac Tot - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Hjdpotphubofx Ac Tst

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Hedpfx Aoznuncsc Tot Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Hjdpfx Aceznucyo Tjt Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: used, Year of construction: 2009, Kemper HK 200 L bowl lift suitable for Kemper ECO 100/125 a bowls max. 390 kg lifting weight lifting height approx. 247cm total height 340cm year of build 2009 safety cage Hjdpfx Asx Swzisc Tjt dough scraping unit pictures BEFORE reconditioning

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available Hedogylq Sjpfx Ac Tet -Dimensions: 510/430/H570 mm -Weight: 62 kg

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU adhesive Adhesive application using nozzle technology Sensor-controlled nozzle Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatically controlled for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Routing unit, flush trimming 6 mm, radius routing - chamfer routing - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Hodpezcau Ejfx Ac Tst Surface scraping unit - finishing Buffing unit Spray device in the infeed and outfeed area, as well as for PU Machine with all processing tools Machine is WORKSHOP TESTED From a craft business First delivery 2019 Available from stock in Lieboch

Year of construction: 2025, condition: new, functionality: fully functional, UMG-110.56 Scraper conveyor is designed for transporting wood waste after processing. The conveyor works at an angle. The conveyor is anchored to the base during installation. The speed of the chain and scrapers can be set with a speed regulator, the design speed is 15m/min at 50Hz. The length and height can be adjusted according to your needs. Hsdpfx Aowdgfuoc Tjt

Condition: used, Year of construction: 1993, Used Fryma Koruma model VME-120/C stainless steel vacuum process vessel. - Manufacturer: Fryma Koruma - Model: VME-120/C Vessel: - Capacity of vessel: 25 - 120 litre - Vessel rated: -1 bar at 150°C Hedpfszvn D Hox Ac Tet - Capacity of jacket: 25 litre - Jacket rated: 3 bar at 150°C Mixers: - scraping-mixing system: speed 17/34 rpm driven by 2.0/2.4 kW motor - homogenizer system with diameter 230 mm: speed 300 - 1450 rpm, driven by 15 kW motor Includes: - vacuum pump - control panel - hydraulic agregate for lifting mixing units

Year of construction: 2009, condition: ready for operation (used), HRS UNICUS dynamic heat exchanger, manufactured from AISI 304 stainless steel. Equipped with an internal scraping system to increase the heat transfer coefficient and prevent fouling in viscous products. Hsdpfx Acozdkczj Tjt Particularly suitable for: • Fruit purees. • Vegetable purees. • Sauces. • Processed tomatoes. • Vegetable creams. • High-viscosity products. From an industrial production line for purees, in operation until it was dismantled. Additional documentation and photographs available.

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 710 mm, torque: 201 Nm, controller manufacturer: Siemens, controller model: 840D SL, table width: 500 mm, table length: 400 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 50 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 50, mount diameter: 100 mm, Equipment: chip conveyor, rotational speed infinitely variable, Year of construction: 2017 Control unit Siemens: 840 D SL Spindle: SC 100 12000 1/min, 46kW, 201 Nm Tool clamping system: HSK 100 Tool magazine / places: Chain / 50 Rotary table: 3+2 (360.000° X 0,001°) Coolant unit: Interlit TMF 300; IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 710 / 750 / 710 Pallet size (mm): 400 X 500 Hedpoyk D U Sofx Ac Tjt Workpiece clamping: Hydraulic 200 bar Additonal options, Specifics: Receiver for wireless measuring probe (RENISHAW); Pneumatic unclamp check at workpiece loading station; location check at workpiece loading station; Screen blow-off device for operator door; Fast drill fracture sensing (SBBK); status lamp; Integrated process monitoring (IPM) + Monitoring function to minimise machine damage in case of collision; Interface for exhaust system; exhaust system; Scraping conveyor for wet machining; interface robot loading; MSK multi spindle head; Balluff tool ident Format HL 06;

Condition: excellent (used), Glass cooking wok 300 litre and side wall scrape. With thermial oil boiler. Tilts both sides. Hodpoumb Hiofx Ac Tet

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller manufacturer: HEIDENHAIN iTNC-530, controller model: iTNC-530, spindle speed (max.): 10,000 rpm, spindle motor power: 22 W, BRAND: DOOSAN MODEL: VM-640 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 11/2010 CNC CONTROL: HEIDENHAIN ITNC-530 MACHINE WEIGHT: 9,000 kg MACHINE DIMENSIONS: Length: 4,200 mm; Depth: 2,800 mm; Height: 2,900 mm Spindle Taper size: ISO-40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min.): 18.5/22 kW Working Capacity X axis: 1,300 mm Y axis: 650 mm Z axis: 625 mm Distance spindle nose – table surface: 150 ÷ 775 mm Table Table dimensions: 1,400 x 650 mm Maximum table load: 1,000 kg Feed Rates Rapid traverse (X / Y axes): 36,000 mm/min Rapid traverse (Z axis): 30,000 mm/min Working feedrates (X / Y / Z axes): 1 ÷ 15,000 mm/min Tool Changer Tool taper: DIN 69871 – A40 Shank: DIN 69872 – A40 Tool magazine capacity: 30 stations Max. tool diameter (adjacent stations full/empty): Ø 90 / Ø 150 mm Max. tool width: 300 mm Max. tool weight: 8 kg Other Equipment Chip conveyor Coolant tank with wash pumps High-pressure coolant pump through spindle Spindle line air conditioning unit Transformer Manuals, Electrical Schematics, and CE Declaration The following maintenance has been performed on the machine: - X axis ballscrew overhauled and bearings replaced Hjdpfxsxxlfyo Ac Tjt - Geometry recovered with hand-scraping of Turcite on X/Y axes - Complete internal repaint and Lexan replacement - Complete overhaul of X/Y/Z axis telescopic covers - Lubrication system overhauled

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Hedpfx Ajyziutec Tot Edging unit Gluing unit with glue tank Trimming unit Rounding unit Edge scraping and gluing unit Brush unit "StarTouch" control system replacing Orion 110 Only 30,217 meters of edge material processed (statistics from 12.03.2026) 4,482 hours

Condition: excellent (used), Year of construction: 2011, YEAR OF PRODUCTION: 2011 Technical specifications. - Basic machine Longitudinal stroke X = 700 mm Vertical stroke Y = 650 mm Transverse travel Z = 700 mm - Tool magazine with 295 tool places HSK A63 - Continuous rotary table at 360,000 divisions 65 rpm Hedpfsuz Urpsx Ac Tst - 7-position multi-pallet from mm.500 x 500. Rotation footprint dia. 800 mm. - Allowable load on each pallet table kg 550 - No.01 Operator's station for loading/unloading workpieces - Spindle speed = 12,000 rpm - Refrigeration unit for conditioning the spindle cartridge - Spindle with provision for coolant supply through tool flange - Air-conditioned electrical control unit with air conditioner - Ecological protection working area and machine - Lamp for work area lighting - Scraping chip conveyor with rear exit - Chip evacuation augers - 750-l coolant collection tank with self-cleaning filter system; - Sealed top guard prepared for connection with centralized fume extraction system - CNC FANUC 16 I Options included - C301 Piece Washing - C303 Tool Cone Washing - C410 Tool Monitor MCM - C305 Oil Remover - C333 Automatic coolant filler - C308 High pressure 65 Bar - C403 Tool Presence Control By Laser - C412 Balluff read/write system with JTERM-01 - C408 Marposs radio-frequency touch probe MIDA T36 - jFMX MCM supervisory system including Network Part Program

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Hedezux T Aopfx Ac Tot Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics Hedpsxflclsfx Ac Tst -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: used, mileage: 340,850 km, power: 340 kW (462.27 HP), first registration: 06/2008, fuel type: diesel, empty load weight: 13,100 kg, overall weight: 26,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 6x4, wheelbase: 4,800 mm, brakes: engine braking, color: silver, gearing type: mechanical, emission class: euro5, suspension: steel, Equipment: ABS, additional headlights, cruise control, differential lock, low noise, parking heater, traction control, trailer coupling, Urea tank (AdBlue) Displacement 12,902 ccm Hydraulics (power take-off) EBS Payload 12,900 kg Automatic climate control Palift T 20 3rd + 7th gear scrapes Sun visor 1 couch Cab air suspension Hedpfxeu Dx Nqe Ac Tst Errors excepted

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Hodpey Spclsfx Ac Tet Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: used, Year of construction: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Panel width min - max mm 215 - 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Hjdpfjk Egvdex Ac Tst Pin height 12 - 18 - 25 mm Distance between the retractable pins mm 500 \ 400 Working groups mounted on NC motorized overtables Squaring part composed of (for each side): Anti-adhesive group Timed automatic anti-splinter group Double Hogger group Edging part composed of (for each side): Gluing unit with pre-melter for PUR glue and pre-melter for EVA glue Edge pressure rollers electronically controlled by N.C. Edge holder magazine with 6 positions End Cutting unit with two motors Rough trimming unit with 2 motors Fine trimming unit with 2 motors electronically controlled by NC Rounding unit with 4 motors 0-90° tilting grooving group electronically controlled by CN (movable shoulder 0-90° tilting grooving group + double superimposed grooving unit (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraping unit Brush group Phon group

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Hodpszrd Nqefx Ac Tet Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Hedjzrd Rzjpfx Ac Tet Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. Hsdsyvt H Aspfx Ac Tot - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Condition: used, Year of construction: 2001, total height: 1,750 mm, total length: 5,650 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit Hedpfx Acoxlqpdo Tot - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 50 - Min. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, operating hours: 2,216 h, total height: 1,700 mm, total length: 6,100 mm, total width: 1,450 mm, Weight: 2.500 kg - Machine available from: 2026-01-19 - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 26 - Operating hours: 2216 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - - Tools available: Yes - └ 4th unit type: Rough milling unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 39.5 - Fuse [A]: 50 Hjdpfex Aq Dpox Ac Tot - Transport dimensions: 6100mm x 1450mm x 1700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels