Used Schneider&Ozga Tv02 for sale (713)

Condition: new, table diameter 1500 mm table load 5,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. Njdpfxjfv Axfj Aarowk • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 900 mm table load 1,0 t Njdsfv Axxjpfx Aarjwk swivelling range 135 Grad turning speeds 0,12 - 1,2 U/min 820 mm welding current 500 Ampere total power requirement 0,75 + 0,55 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1100 mm table load 2 t swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min 4000 Nm 0 1,1 / 0,75 kW welding current 500 Ampere • Self-locking gear, therefore no forward and backward at eccentric Nwedpefv Ax Aefx Aarjk Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1400 mm table load 4 t swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 8000 Nm Nwsdpfxofv Ax Rj Aarek 0 1,1 / 1,5 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1500 mm table load 5 t swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 10000 Nm 0 1,5 / 1,5 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. Nwodefv Ax Ujpfx Aarok • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1500 mm table load 5000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1300 - 2050 mm max. torque on the faceplate 10000 Nm engine output 1,5 / 1,5 kW welding current 1000 Ampere - Manual height adjustment. Njdpfx Asfv Ay Dsarewk - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 2000 mm table load 10000 Kg swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min height adjustment 1450 - 2200 mm max. torque on the faceplate 20000 Nm engine output 1,5 / 2,0 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Nwsdsfv Ay Iepfx Aarsk Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2508-CNC Delem DA-58T Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 800 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Approaching speed: 0 kW - Length: 2600 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4800.0 kg Tools - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor Nedpfx Aoiumyzoarowk - Ram drive (travel along the Y-axis): servo motor - Backgauge fingers positioning (R-axis): manual - Punch quick change tooling system form AMADA DA-58T control - One-click program generation - Advanced operator support based on algorithms - Advanced graphic simulation of bending sequences - Included prompts for the operator - Algorithms to shorten the production process - Automatic crowning calculation - High-resolution TFT touchscreen - USB interface Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Ergonomics The operator can work freely throughout the machine's working area thanks to the mobile foot switch and the controller on the swivel arm. Additional LED lighting ensures a comfortable view of the workpieces in any situation. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium Nsdpfx Aaex Tn S Ijrowk - Stainless steel - Carbon steel SOURCE POWER 3000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3112-PRO DA-66T Specifications - Nominal bending force: 1200 kN - Motor power output: 11.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 8400.0 kg - Oil tank: 140 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1590 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Njdpfsvhcgwsx Aarowk Assistance by a specialist Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Table dimensions 1200 x 1200 mm table load 10000 Kg swivelling range 105 Grad turning speeds 0,07 x 0,6 U/min height adjustment 1450 - 2450 mm hollow spindle diameter mm welding current 1000 Ampere max. torque on the faceplate 20000 Nm total power requirement 12,1 kW dimensions of the machine ca. m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal Njdpfx Ajvn Uwnearjwk • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, Table dimensions 1200 x 1200 mm table load 7000 Kg swivelling range 105 Grad turning speeds 0,07 x 0,6 U/min height adjustment 1450 - 2450 mm hollow spindle diameter mm welding current 1000 Ampere max. torque on the faceplate 14000 Nm Nwjdpfx Aevn Uyvearsk total power requirement 8,2 kW dimensions of the machine ca. m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Nwsdouf Nm Hepfx Aarek Motor power: 1,1 + 1,5kw Table tilt (Motorized): Tilt speed 0.67 rpm Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. SEE THE TECHNICAL DESCRIPTION BELOW Nwodpfxsdfc Uns Aarok Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: excellent (used), Index MS42C Nwodpsfdr R Ujfx Aarok HBF rod guide Oil distributor Flaps with tensioning screws

Year of construction: 2023, condition: new, SEMIX Mobile 60 S4 is equipped with 1500/1000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Nodpfsgaw Tqsx Aarowk All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Nsdpfogay Rpex Aarewk All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Njdogay Rtepfx Aarswk All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service. Nwsdpfx Aogay Suoarsk

Year of construction: 2023, condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. Nedpogazi Dsfx Aarjwk SEMIX Compact 30 can fit on a single container and assembled in 3 days completely. SEMIX Compact 30 is equipped with 750/500 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. Nodpfjgazkzsx Aarjwk SEMIX Compact 30 can fit on a single container and assembled in 3 days completely. SEMIX Compact 30 is equipped with 750/500 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, SEMIX Compact type concrete batching plants are designed for limited spaces and transportation easiness for overseas countries. SEMIX Compact 60 can fit on a two container and assembled in 3 days completely. Nwjdpfx Aoga D E Ijarek SEMIX Compact 60 is equipped with 1500/1000 liters capacity Concrete mixers which can be a single shaft or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. The robust steel structure maintains long-life performance. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer mechanism. SEMIX Compact Concrete Batching Plants offers variety in aggregate transfer mechanism. Even in compact batching plants, users can choose either skip hoist mechanism or transfer conveyor for aggregate transfer. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate their CRM system. SEMIX's engineering team can int

Year of construction: 2026, condition: new, Fully automatic horizontal stretchfilmwraping machine with air bubble film unit SPINNER 1000s Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. operator side: - in throughput direction right General machine features: - Main motor power: 1,5 kW - Max. ring rotation speed: 80 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total weight: 770 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Automatic film hooking system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems Optional Equipments; - Different sized conveyors - Infeed and outfeed rollers - Air bubble film unit Technical features: Product to Wrap Sizes - Max. length: Unlimited - Min. length (WxHxL): 100x18x550 mm Conveyor belt’s features: - Useful length: 1924mm Nwjdsfuwg Ispfx Aarjk - Total length: 2000mm - Working height: 900mm - Electric motor power: 0,75 kW - Max. speed: 12 m/sec. - Max Load Capacity: 100kg/m Stretchfilm features: - Max. width: 200mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OE 1kW / VF1530-1000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.0kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Stainless steel: Recommended thickness 4.0mm, maximum thickness 5.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 3.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0mm Structure parts - Structure type: welded - Number of supporting legs: 8 - Servo motors: Schneider - Gears and slats: bevelled - Linear guides: HIWIN - Gearboxes: Motovario - Tooth bars: YYC - Bearings: NSK Nwsdpfxsphmx So Aarok - Pressure relief valves: SMC - Cooling: water cooler ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OE 2kW / VF1530-2000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 2.0kW - Energy requirements: 15.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - Ingress Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Stainless steel: Recommended thickness 6.0mm, maximum thickness 8.0mm - Aluminum: Recommended thickness 4.0mm, maximum thickness 6.0mm - Brass: recommended thickness 4.0mm, maximum thickness 5.0mm Structure parts - Structure type: welded - Number of supporting legs: 8 - Servo motors: Schneider - Gears and slats: bevelled - Linear guides: HIWIN - Gearboxes: Motovario - Tooth bars: YYC - Bearings: NSK - Pressure relief valves: SMC - Cooling: water cooler ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist Nwodpfx Aaophpfaerek We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package