Used Sahinler Single Column Press - Hydraulic for sale (35,265)

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm C-Type Gedpfx Aistxdmwsvokc 1 Station *

Condition: used, Year of construction: 1999, hydraulic ja Gksdpfx Aisx U A Tvjvoc 100 t weight of the machine ca. 2,9 t

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) Gksdpfeu Rwa Iox Aivsc T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm Gkjdpot Hw E Ijfx Aivjc stroke 560 mm total power requirement 33 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm

Condition: used, Year of construction: 1984, pressure 100 t throat 320 mm stroke 138 mm table surface area 850 x 550 mm dayligth 385 mm oil volume ca. 500 l ram surface 560 x 450 mm total power requirement 30 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 1,5 x 2,0 x 3,0 m - Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and trunnion clamping piece - Conversion of hydraulics to proportional valve - Conversion of switch cabinet - Electrical travel measurement, Siemens Soft-Start, touch panel The following work was carried out in-house: - Machine was technically inspected Gkodpfx Aet Dctrsivjc - Machine was repainted - Before delivery, a current UVV test with braking time measurement is carried out Machine is safe for manual insertion work on the open mold

Condition: new, neu ca. 4 Monate ab Auftragse Italien 35400 € 676.14 € 40 to 500 mm 700x350 mm 700x500 mm 500 mm 250 mm 26 mm/s 9 mm/s 4 kW 1500 mm 1000 mm 2500 mm 1500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings Gsdpfjynm Hrex Aivekc € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € 900,-

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Gkodpfx Ajtx E Rqjivoc Weight 3.1 tons

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 Gsdpfx Aievvx Exsvskc 160000 KG stroke of worktool slide 41 Hub/min +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm total power requirement 1,5 kW Gkedpeul Eawefx Aivoc weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: new, functionality: fully functional, pressing force: 28 t, stroke length: 150 mm, table width: 300 mm, table length: 325 mm, throat depth: 225 mm, TECHNICAL DETAILS Gkjdpfxsyg Dr Aj Aivsc Pressing force: 28.0 t Throat depth: 225 mm Stroke: 150 mm Table size: 325 x 300 mm Working speed: 2.0 - 9.8 mm/s Return speed: 12.8 mm/s MACHINE DETAILS Total power requirement: 4.0 kW Dimensions & Weight Space required: approx. 1,800 x 900 x 2,000 mm Machine weight: approx. 650 kg EQUIPMENT NC control for adjusting the ram stroke Selector switch for manual or semi-automatic operation Flow control and pressure relief valve Integrated pressure gauge Various tools can be mounted on the ram; there is a 40 mm hole inside for securing the tools.

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Gsdelc N R Depfx Aivjkc

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Gkodez Alg Sjpfx Aivec Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor Gedpfxezp Ex Ue Aivskc - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides Gedpfx Aog Iihwoivokc z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm hole in the table 130 mm Gksdpfx Aexukpcoivsc

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release Gsdpfsv Uraajx Aivekc (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm Gkjdpfsvfhp Sjx Aivjc total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Godpfx Aijyupulsvokc Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Gkjdpfjyath Tox Aivoc Good condition

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Gkodpez Atv Isfx Aivsc Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Gkjdpfx Aelc N Rysivec

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Godpsyiflmefx Aivjkc

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 20 t, Single-column press – Manufacturer: Durendus – 3–20 t hydraulic press – Table 1000 × 400 mm For sale is a hydraulic single-column press (C-frame) from Durendus with an adjustable pressing force of 3 to 20 t. This compact and robust machine is ideal for assembly, pressing, and light forming operations in the workshop and production environments. ==== Technical data & Information: Hydraulic Single-Column Press – 3–20 t ==== General Information - Manufacturer: Durendus - Model: assembly press / single-column press - Design: C-frame press - Pressing force: 3 – 20 t (adjustable) - Machine weight: approx. 1,200 kg - Paintwork: RAL 7035 (light grey) / RAL 2009 (orange) ==== Working Area - Max. distance table – ram: 500 mm - Stroke / travel: 500 mm - Table height: 940 mm ==== Table & Ram - Table plate: 1,000 × 400 × 40 mm - Ram: Ø 250 mm, round, interchangeable ==== Speeds - Downstroke speed: 2 – 10 mm/s (adjustable) - Upstroke speed: 20 mm/s ==== Hydraulics - Motor power: 2.2 kW - Oil tank capacity: 60 l - Pump: Agro-Hytos or equivalent ==== Equipment & Operation - Pressure adjustment via rotary knob - Robust machine frame - Control cabinet technology from renowned manufacturers - Emergency stop Godpfjx Ap Utsx Aivokc ==== Documentation & Delivery - CE declaration - German-language documentation - Installation, commissioning, and training available at extra charge ===== Assembly work, pressing operations, workshop applications, small series production, light forming operations Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die set-up press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which is based on these. Our major strength is in special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. The hydraulic systems of our presses are equipped mainly with components from leading European manufacturers.

Condition: used, Year of construction: 1981, Technical details: Gedpfx Ajyk Utloivekc pressure: 40 t

Condition: new, Year of construction: 2026, pressing force: 100 t, Single-Column Press – 100 t – C-Frame – 700 × 750 mm – Hydraulic Press For sale is a hydraulic single-column press (C-frame) with a pressing force of 100 t. The machine features a table size of 700 × 750 mm, a maximum daylight opening of 550 mm, and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly, and forming tasks in industrial production environments. ==== Technical Data & Information: Hydraulic Single-Column Press – C-Frame – 100 t ==== General Information - Design: Single-column press / C-frame - Pressing force: 100 t Gkodpfx Aoytql Aeivoc - Table size: 700 × 750 mm - Max. distance ram – table: 550 mm - Working height: 1,000 mm - Overall dimensions (W × D × H): 1,200 × 1,150 × 2,550 mm - Total weight: approx. 5,800 kg - Frame: Welded steel construction - T-slots / boreholes: DIN 650 / 22 mm ==== Hydraulic Cylinder - Stroke: 400 mm - Piston rod: Ø 80 mm - Cylinder: Ø 140 mm - Max. working pressure: 270 bar - Interchangeable press head: Ø 100 mm ==== Hydraulic Power Unit - Return speed: 14 mm/sec - Working speed: 9 mm/sec - Hydraulic pump: ASC - Flow rate: 19 l/min - Motor power: 7.5 kW - Oil tank capacity: approx. 70 l - Hydraulic manifold / valves: Duplomatic - Pressure display: Manometer - Pressure adjustment: adjustable - Sensors: limit sensor and pressure switch - Cooling: air cooling - Hydraulic power unit: mounted on top of the press ==== Electrical Equipment - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 7.5 kW - Total connected load: approx. 10 kW ==== Control Cabinet - Protection rating: IP54 - Reserve space: 30 % - Cooling: available - Interior lighting: available - Operating mode selector: lockable ==== Operation - Manual operation via hand-lever valve - Foot pedal control - Pressure adjustment via pressure relief valve - Manometer display - Emergency stop on control panel ===== Assembly work, forming processes, straightening operations, pressing operations, industrial manufacturing Hydraulic press, single-column press, C-frame press, workshop press, assembly press, straightening press, industrial press, production press