Used Rational Uv 202E Icombi for sale (1,079)

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. - Manufacturer: Cefla - Model: UV-R3 Psdpjx Tpx Asfx Abkjgn - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed speed adjustable: ~ 1.25 - 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm Psdpfx Absu S N R Eokegn - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: excellent (used), Henkel UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use. The device integrates the following: a control unit with an integrated power switch and operating hour counter a lamp housing with the burner reflector igniter. Includes a UV protection box. Features: Contains a 400 W metal halide lamp Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be detached from the lamp module and operated separately Adjustable lamp height for optimal irradiation With a glass filter to prevent short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Podpfjzg Expjx Abkogn Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm x 472 mm x 300 mm Ambient and operating temperature +10 °C ... +30 °C Storage temperature -10 °C ... +60 °C Weight ~ 11.5 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Pgedpfsr D Ngtex Abkjn Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 1994, Technical Specifications: - Manufacturer: IST - Year of manufacture: 1994 - Working width: 1300 mm - With 3D mirrors - Number of tubes (viewed from above): 1 - Tube positioned at an angle - Electrode spacing 1620 mm - Suitable for drying edges - Suitable for mercury Podozf N Tnspfx Abkjgn and gallium tubes. - Tube power 80 W/cm - For mounting on an existing conveyor - Location: in storage - Volts, Hz 400 / 50 - Good condition

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock Podpfx Abjzf N Rgskjgn

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: Psdpozf N Nijfx Abkogn - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes Pgsdpjzf N Hbofx Abken - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm Pjdpozf N Edefx Abkjgn - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: like new (used), Serial: 26557-PO1 Pgedehxyq Eopfx Abkon Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Podpfoy Exz Rex Abkjgn

Condition: excellent (used), -Dimensions: 850x950x850 mm -Capacity: 10x 1/1 GN Pgedpfowx Rw Dsx Abken -Model: CPCM10 -Serial No.: E11CD03051089 -10 levels: 540x330 mm -3 cooking modes: steam, forced-air, combination -5 air circulation speeds -Voltage: 400 V -Power: 19 kW -Weight: 336 k

Condition: used, - External dimensions (LxWxH): 1082x1052x1117mm - Capacity: 20 x GN1/1 Pjdjy H Htwopfx Abkogn - 20 shelves: 540x330mm - Combi oven for 1 trolley - 3 cooking modes: steam, convection, combination - 5 fan speeds - Voltage: 400V - Weight: 336kg - Refurbished equipment: unit is prepared upon order; collection and return times are agreed at that moment (please enquire for post-refurbishment pricing) - Automatic climate control - Automatic cooking management - Production scheduling - Automatic cleaning and descaling management - 9 automatic cleaning programmes

Condition: used, -Dimensions (LxWxH): 850x950x850mm -Capacity: 10 x 1/1 GN -Model: CPCM10 -Serial Number: E11CD03051089 -10 levels: 540x330mm -3 cooking modes: steam, convection, combination Gtjy Tdox Ux Snox Hdst Pgsdpfx Aex Ux Snjbken -5 fan speeds -Voltage: 400V -Power: 19kW -Weight: 336kg

Condition: used, - External dimensions (LxWxH): 1082x1052x1117 mm - Capacity: 20 x GN1/1 - 20 levels: 540x330 mm - Combi oven for 1 trolley - 3 cooking modes: steam, convection, combined - 5 air circulation speeds - Voltage: 400 V Pgedpfx Abewx Rw Reksn - Weight: 336 kg

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Pgsdezavluopfx Abken Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Heidenhain UV 105 ID. 344 980-13 SN13442060, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos, used, in good condition, 100% functional, delivery contents as shown in photos. Pgsdpfx Asx Eti Njbken

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 105, part number 344 980-13, serial number: 1334360, offered on an exchange basis (Exchange service). The unit has been professionally overhauled and fully tested, comes with a 3-month warranty, and is 100% functional. Scope of delivery as shown in the photos. Pedpfjx Etkyex Abksgn Please note: Under the exchange procedure, your defective return unit must not have any mechanical damage such as fractures or breaks, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: ready for operation (used), You are bidding on a Heidenhain UV 105 Inverter, part no. 344 980-13, serial number 13442060, offered in exchange (exchange service). The unit has been professionally overhauled, fully tested, and comes with a 3-month warranty. It is 100% functional. Scope of delivery as shown in the photos. Pedpfxsx Etk Hj Abkjgn Attention: In the exchange process, your returned defective part must not have any mechanical damage, such as breakage, as these are beyond repair. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 140, type 335 009-01, SN: 8657728B, offered under an exchange service. The unit is professionally overhauled and fully tested, supplied with a 6-month warranty and guaranteed 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return unit must not have any mechanical damage such as breakage, as these cannot be repaired. In such cases, an additional charge of €500 incl. VAT applies. Attention: You are bidding on a Heidenhain Inverter UV 140, 335 009-01, SN: 8657728B in exchange (Exchange service), professionally fully overhauled and tested, with a 6-month warranty, 100% functional. Scope of delivery as per photos. Please note: In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as fractures, as these are irreparable. In such a case, an additional invoice for €500 incl. VAT will be issued. Pgodpfx Absx Etmzjken

Condition: ready for operation (used), Heidenhain UV 140 power supply unit ID 335 009-01 SN 8657728B. The item has been completely overhauled and comes with a 3-month warranty. Professionally fully refurbished and tested, in good preserved condition, 100% functional. Scope of delivery as shown in the photos. Pedpfsx Etpcox Abkogn

Condition: ready for operation (used), Heidenhain UV 105 ID 344980-01 The listed cost covers only the repair analysis of your component, which you can send to us. After evaluating your component, you will receive a quotation with the actual repair costs. Upon your approval for repair, the analysis fee will be waived. As part of the repair process, your component will be fully overhauled, and we offer a 3-month warranty for our work. Pedpfx Abey Nrkyeksgn

Condition: ready for operation (used), Heidenhain UV 106 ID 366572-11. The costs only cover the repair analysis of your component, which you can send to us. After examination of your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis fee will be waived. Your component will be completely overhauled as part of the repair and will come with a three-month warranty from us. Pjdpfsy Nrldox Abkegn

Condition: ready for operation (used), Heidenhain UV 106B ID 546581-01. The costs cover only the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation detailing the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair process, your component will undergo a complete overhaul and will come with a 3-month warranty from us. Podpfx Aboy Nrlkjkjgn

Condition: ready for operation (used), Heidenhain UV 150 ID 361170-01. The costs only cover the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and is covered by a 3-month warranty from us. Pgsdpfx Absy Nrpceken