Used Polar Werke 107 El for sale (10,154)

Condition: used, Year of construction: 1989, Make and model: Bruderer BSTA 25 EL Year of manufacture: 1989 Nominal capacity: 250 kN, 25 tons Max. number of strokes: 100/1350 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Gedoyrf Aaspfx Aaxjuh Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Gedoy Tx Rbopfx Aaxeuh

Condition: excellent (used), Part suitable for: cars Gusdpfx Aaex N R Rroxeh Technical condition: very good Optical condition: very good

Condition: ready for operation (used), Bosch SM 25/50-TA servo module 1070077376-107 SN: 002359561, used, good condition, 100% functional, delivery scope as per photos. Gjdpfex Eqyxjx Aaxouh

Condition: ready for operation (used), Süd - Electric fan motor type EL 352, 110 V, 2.4 A, 50 Hz, serial number: 606272, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. Godpsx Dwdxofx Aaxsuh

Condition: good (used), Year of construction: 1977, 1 used eccentric press Make: Helmerding Model: EL 35 B Year of manufacture: 1977 Machine no.: 5182 Pressing force: 350 kN Adjustable stroke: 12 - 80 mm Adjustable slide: 70 mm Slide strokes per minute: 110 Adjustable table: 150 mm Safety distance: 150 mm Overrun: 50 mm Weight: 2050 kg Equipped with Gedjwxxr Aopfx Aaxjuh press safety valve

Condition: ready for operation (used), Phytron WSS 107-200-24-60 stepper motor E64801 24V~ 60Hz insulation class F, used, good condition, 100% functional, delivery as shown in photos Guedjwx U Nwjpfx Aaxjh

Condition: new, mileage: 400 km, power: 140 kW (190.35 HP), fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 31, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * Mercedes Benz Sprinter 519 * available immediately * Automatic transmission * Cruise control * Driver's seat with suspension * Multifunction steering wheel * Leather steering wheel * MBUX * Navigation system * Assistant systems * Rear view camera * 29+1+1 * Electric entrance door * Heating for the passenger compartment Godpfsy D U Scsx Aaxeuh * Roof air conditioning Webasto * Microphone * Ventilation for the passenger compartment * LED light in the interior * Luggage rack * Grab bars * Rail system * Convectors * Adjustable backrests * Insulation * etc. * Financing possible * Trade-ins possible * Subject to prior sale, errors and changes reserved

Condition: used, Gear motor, electric motor -Speed: 107 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 305/190/H150 mm -Weight: 9.9 kg Godjc U Tzhopfx Aaxjuh

Condition: used, Gear motor, electric motor -Speed: 107 rpm Guedpfx Aajdaa Hnjxsh -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 23 -Number: 2x motor available -Price: per piece -Dimensions: 395/140/H190 mm -Weight: 11 kg

Condition: new, El. heated chamber furnace, make VEI Gujdjipvgiopfx Aaxoh type: KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW fan power: 5,5 kW connected load: 61 kVA

Condition: used, Year of construction: 1988, machine/vehicle number: 22, Messsystem für Polar 155 EMC Duxon SMD / Measuring System for Polar 155 EMC Duxon SMDSerial-No. 022 490 Messsystem für Polar 155 EMC Duxon SMD Measuring System for Polar 155 EMC Duxon SMD Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Guodpfxsiqlmlo Aaxjh Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2023, Weight 950 kg Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm diameter knife block 120 mm Gedpfx Aajmdr A Eoxjuh Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Picture contains special accessories

Condition: excellent (used), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch, unused, original packaging -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C -Quantity: 4 thermostats available Godpfx Ajlc Uh Eoaxouh -Price: per piece -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/pc.

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm Godpeziuazsfx Aaxsuh - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: new, mileage: 50 km, power: 105 kW (142.76 HP), fuel type: electric, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, total length: 6,450 mm, total width: 2,100 mm, total height: 2,310 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, = Additional Options and Accessories = - Heated exterior mirrors - Co-driver's seat - Driver's airbag - Remote-controlled central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Air conditioning - LED daytime running lights - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Immobilizer - Heated windshield - Partition with window Gujdpfxezvx Dqe Aaxsh = Additional Information = Number of doors: 2 Year of manufacture: 2026 Cab: single Front axle: Max. axle load: 1850 kg; steered Maximum rear axle load: 2100 kg GVWR: 3,500 kg Overall condition: very good Technical condition: very good Optical condition: very good

Condition: ready for operation (used), Chip – Centrifuge STEIMEL POLAR / S 5 - Drum diameter (basket) 500 mm Guedpfx Aaozylzqjxeh - Speed / power: 1000 rpm, adjustable up to a maximum of 1400 rpm - Includes documentation & electrical diagram Dimensions L x W x H: 0.7 x 0.7 x 1.2 meters / Weight approx. 250 kg Errors and omissions excepted.

Condition: used, mileage: 43,100 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, number of seats: 9, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: !!!HAIL DAMAGE!!! Guedpfxjzyf A Ue Aaxeh B25 Parking brake, electric, BA3 Active Brake Assist, BB6 Brake force compensation in case of brake booster failure, BB7 CO2-optimized braking system, BH1 HOLD function, C6L Multifunction steering wheel, CF7 Comfort chassis, CL1 Steering wheel adjustable in inclination and height, CU4 Aerodynamics package, E07 Hill start assist, E1D DIGITAL RADIO (DAB), E1E Navigation, E57 Electrical system for trailer socket, E7M MBUX Multimedia System, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2W Winter package, F3Z Comfort closing, F48 Heating for windshield washer system, F64 Exterior mirrors, electrically foldable, F66 Lockable glove compartment, F68 Exterior mirrors, heated and electrically adjustable, F71 Interior mirror, automatically dimming, FKB Panel van, FP2 Mirror package Vito, FY7 Multi-button remote control, FZ5 Anti-theft and intrusion alarm system, G43 9G-TRONIC, GA7 Transmission, automatic, torque 700 Nm, H00 Warm air duct to passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 Semi-automatic climate control system TEMPMATIC, HZ0 Auxiliary heater, electric, HZ7 Semi-automatic climate control system, TEMPMATIC in the rear, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning system for front passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, K51 Protection against misfueling, KB5 Main tank 70 liters, KP7 Exhaust gas cleaning SCR generation 4, L LEFT-HAND DRIVE, LA2 Headlamp Assist, LC4 Comfort roof control panel, LC8 Ambient lighting for tailgate, LD9 Interior light(s) in the rear, LE1 Adaptive brake light, LE6 Night lighting in the rear, M3E Suction fan, electric, performance level 5, M60 Generator 14 V / 250 A, M72 Vehicle suitable for HVO fuel, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MO5 EMISSION CLASS EURO 6e RDE5 M/N1 GR. II, MS1 Cruise control, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, RY2 Tire pressure monitoring system at front and rear axle, wireless, S23 Front passenger seat, single seat, SA1 Seat cushion depth adjustment for driver, SA6 Airbag for front passenger, SB1 Comfort driver's seat, SE5 Lumbar support for driver's seat, SH1 Thorax-pelvis sidebag for driver, SH2 Thorax-pelvis sidebag for front passenger, SH9 Windowbags for driver and front passenger, SK2 Seat occupancy detection for driver's seat, SK6 Child detection in the vehicle, passive, T14 Active locking mechanism for sliding door, T19 Sliding door, left, T55 Electric actuation for sliding door, right, T56 Electric actuation for sliding door, left, T70 Child safety lock on doors in passenger compartment, T74 Grab handle for entry, U3V Seat facing each other, 1st row, seat rails, U73 Armrests for seating in passenger compartment, UR1 Seat rail system with quick-release mechanism, US4 3-seater bench seat, comfort, 1st row, outer seat folding, US5 3-seater be

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver ELECTRICS 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Guodpfezufl Sjx Aaxoh Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation

Year of construction: 2012, condition: used, functionality: fully functional, PERMOLEX-POLAR K 81 H – a complete process line for de-oiling and separating metal chips. For sale is a complete industrial system for de-oiling, oil removal, and separation of aluminum and steel chips. Type: Permolex-Polar K 81 H Year of manufacture: 2012 Application: de-oiling and separation of loose aluminum and steel chips Capacity: max. approx. 3.4–6 m³/h Throughput: approx. 160 tons of chips per month Control: Siemens SIMATIC S7-300 / operator panel TP177B Rotational speed: 980 rpm Power supply: 400 V / 50 Hz Offered for sale is a complete set of equipment forming an industrial system for centrifuging liquids from chips and further separating aluminum and steel chips. The process includes: chip feeding → buffer tank → conveyor → PERMOLEX-POLAR centrifuge → oil/coolant discharge → magnetic separation → chip separation → transport to containers. Chip transfer points are enclosed, which reduces the lifting of material during transport. Guedpez Hw R Usfx Aaxoh The system includes: • PERMOLEX-POLAR K 81 H chip centrifuge, • approx. 7.5 m³ buffer tank for chips, • 3 x KF 600 scraper conveyor, • double separating shaft with neodymium magnets, • vibratory conveyor, • approx. 250 l oil/coolant tank, • submersible pumps, • floor trays, • complete Rittal control cabinet, • Siemens S7-300 controller, • TP177B operator panel, • supporting structures and system components. Application The system is designed for the continuous processing of a mixture of aluminum and steel chips. The process includes: chip feeding → de-oiling/oil removal → separation of steel fraction → transport of separated chips to tanks/containers. The system is designed for handling large quantities of material and features automatic control and level monitoring. Technical condition Used equipment from an industrial installation. The photos show signs of normal operation, dirt, and surface wear on the components. It is recommended to inspect and verify the completeness and technical condition of individual components before purchase. Sold as a complete system or individually, as agreed. Due to its size and complex structure, dismantling, loading, and transport require prior agreement. Technical/design documentation regarding the equipment layout can be provided to interested buyers. 📞 Contact Interested parties are invited to contact us for pricing, additional photos, technical documentation, and to arrange an inspection.

Condition: used, mileage: 107,200 km, power: 260 kW (353.50 HP), first registration: 04/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, navigation system, Well-maintained Mercedes-Benz 2135 Arocs truck with Atlas AK 135 loading crane featuring 3 hydraulic outriggers, remote control, and elevated platform control, plus additional 5th and 6th control circuits for swivel head/grabber, Meiller three-way tipper body, payload 6,840 kg, air conditioning, automatic transmission, trailer coupling, tipping hydraulic connections, high-performance engine brake, navigation system, leather steering wheel, refrigerator in the cab, from first owner with only 100,351 km, and more. Equipment: S-cab Classic-Space short with rear window Wheelbase 3,900 mm Heavy-duty series Weight variant 20.5 t (8.0/13.0) Permissible total weight 18,000 kg Technically possible total weight 20,500 kg Payload 6,840 kg at 18,000 kg permissible total weight Payload 9,340 kg at 20,500 kg technically possible total weight Engine OM936 R6 7.7 l with 260 kW (354 hp) and 1,400 Nm torque Engine Euro 6 E Drive 4x2 Loading crane Atlas AK 135.2E - A3 with hydraulic 3-section outrigger Lifting capacity at 1.90 m / 5,700 kg // 4.30 m / 2,910 kg // 6.20 m / 1,920 kg // 8.10 m / 1,410 kg // 10.10 m / 1,130 kg according to the manufacturer Optional crane extension with one mechanical outrigger up to 12.11 m at 850 kg, available for an extra charge Remote control Elevated platform control with storage for remote control Swivel and grabber control Double outrigger with swivel supports and hydraulically extendable Meiller 3-side tipper, 4.0 m x 2.42 m side walls 0.60 m high Front wall 800 mm high Recessed anchor points in the tipper bed Automatic transmission type G 211-12/14.93-1.0 Mercedes-Benz PowerShift 3 Predictive Powertrain Control Differential lock in rear axle Front and rear axles with leaf springs Stabilizers on front and rear axles Front axle 8.0 t, rear axle, bevel gear 300 planetary 13.4 t Front spring 8.0 t, rear spring 13.0 t Permissible front axle load 8,000 kg, permissible rear axle load 11,500 kg Technically possible rear axle load 13,000 kg Axle ratio i = 3.714 Air conditioning system Electronic braking system with ABS and ASR High-performance engine brake Disc brakes with full protection on front and rear axles Engine brake Navigation system Refrigerator in the cab Cruise control Trailer coupling Rockinger D40 with air pressure connections Permissible total weight of the vehicle and trailer 44,000 kg Trailer load with continuous braking system 35,000 kg Rear tipping hydraulic connections for tipping trailers Multi-function steering wheel in leather version LED daytime running lights 290-liter aluminum tank External sun visor Retractable side sun blind on the driver's side Comfort central locking system 2 LED roof marker lights on the cab roof Electrically adjustable side mirrors and electric windows Gedpfx Aasz Exhljxsuh Driver's air-suspended seat with velour seat covers German vehicle from first owner Very good and well-maintained condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2625 F

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Gujdpfxjztn Dzo Aaxoh Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: used, Caterpillar 329E in excellent condition • Manufacturer: Caterpillar • Model: 329E • Year: 2013, delivered new, only one owner since 2015 • Hours: 10,216 • Serial number: TST00513 • Weight: 29,670 kg • Undercarriage: 50% remaining • Accessories: Standard bucket with teeth, central lubrication system, A/C, GPS ready • No cracks, Hammer glass (Armor Glass), rotary tiller, diesel heater, H.line Technical data: Year of manufacture: 2013 Operating hours: 10,300 h Weight: 31,200 kg Serial number: TST00513 Engine manufacturer: CATERPILLAR Engine: C7.1 ACERT Emission stage: Stage V / Tier 4 Final Drive type: Diesel Undercarriage condition: 70% Gsdez Rpx Hjpfx Aaxeuh Certificates: EPA, CE Delivery condition: EXW Location: Bro, Stockholm County, Sweden Equipment: Hydraulic quick coupler, hammer hydraulics, hammer & scissor hydraulics, hose rupture valve boom, hose rupture valve stick, GPS, air conditioning, additional hydraulics, digging system, fire suppression system, tool attachment, track support, rotator hydraulics, main switch, rotating warning light, central lubrication, extra equipment, diesel heater, sliding rails, steel tracks, standard bucket, slope hydraulics, scissor hydraulics, cab guard -> demolition/FOPS (falling object protection structure) cab guard, hammer hydraulics, deep digging system

Year of construction: 2009, condition: ready for operation (used), Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed power: 112kW, continuous sound pressure level: 78dB(A), length: 6500mm, width: 2000mm, height: 2300mm, weight: 15.7t, operating hours according to PLC: 28,890h, barrel heating: 35,656h, pump: 27,922h, documentation available. An on-site inspection is possible. Gujdpjy Tx Rnefx Aaxoh

Condition: used, Year of construction: 1998, Year: 1998 Guodpfxsz Eh Uhe Aaxsh Condition: functional Technical Specifications: - Maximum cutting width: 780 mm - Maximum cutting depth: 780 mm - Maximum pile height / clamp opening: 120 mm - Clamping force: 150–3,000 daN - Knife speed: 45 cuts/min - Backgauge speed: up to 300 mm/s - Minimum automatic cut without false clamp plate: 20 mm - Minimum automatic cut with false clamp plate: 70 mm - Working table height: 900 mm - Front table depth: 650 mm - Weight: approx. 1,300 kg