Used Panels Return System For Edge Bander for sale (44,148)

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing Rodpfx Afoyq Avhenjt 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Rjdpjttakhjfx Afnot Machine available : in stock

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, table width: 4,200 mm, table length: 1,300 mm, HOT PRESS FOR EDGE-GLUED PANELS ORMA MOD. LS 42/13 AS / BO – CE RULES - N. 10 press cylinders - N. 5 platen cylinders - N. 8 front cylinders - Top-down pressing system - Continuous working capability - 45 kW diathermic oil boiler - Platen dimensions 4200 x 1300 mm - Complete with loading/unloading system - 250 mm glue spreader Redpsywcg Ijfx Afnot - Year 2005

Condition: excellent (used), functionality: fully functional, Equipment: CE marking, documentation/manual, double-sided, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Rjdpfx Afexwui Eonet Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Rodpfx Asv Nhg Sjfnjt Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality Rodpjx Rpgbefx Afnet After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Year of construction: 1994, condition: ready for operation (used), A dividing system consisting of longitudinal and cross-cut saw Anthon is available. Production capacity at 800mm/500mm: approx. 20m³/h, max. panel dimensions X/Y: 6300mm/2500mm, total system dimensions X/Y/Z: approx. 48m/16m/3m, weight: approx. 60t. 1) Saw Anthon LNB-LNB, year of manufacture: 1994, max. package height: 150mm, control: Siemens S5. 2) In-house paternoster, decks: 3, levels: 2. 3) 4x liftomat Holzma Hau series, years of manufacture: 2004, stacking positions: 4. 4) Feeding system Systraplan, year of manufacture: 1989, stacking positions: 3. 5) Cut-off saw Holzma, year of manufacture: 1996. 6) Chipper Masur LZ 800, year of manufacture: 2003. Includes critical spare parts, such as a replacement control unit. This is a system for mass production. Documentation available. An on-site inspection is possible. Expected to be available from October 2026. Redew U Ua Tspfx Afnst

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) Redpfx Afsymbfyenjt - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting width (max.): 4,250 mm, controller model: Power Control CADmatic 4.0, cutting length (max.): 4,300 mm, Set consisting of Holzma panel dividing saw and Bargstedt area storage system! Holzma HPP 380/43/43/R TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz MACHINE DETAILS Control: Power Control CADmatic 4.0 – control unit with 17-inch flat display Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW EQUIPMENT Grooving program Cut-out and tension relief program Labeling / labeling program / label printer PICA 108 Data interface for storage systems Cutting optimization software: Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 TECHNICAL DETAILS Carriage length: 13.45 m Span: approx. 12.5 m Upper edge of stack in storage: max. 1,700 mm Max. workpiece size: 4,200 x 2,070 mm EQUIPMENT Rotation drive 1 loading station and 1 unloading station Rodsxpu Rgjpfx Afnst

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Rjdpfjw Nad Hsx Afnot Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: excellent (used), Edge banding machine Artech Akron 420 Rodpfx Aexw Uzzefnot Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing trim saws, Milling units R1, R2, Profile scraper, Condition: very good

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Redow I Sp Sspfx Afnjt Pre-milling cutters, Glue application with roller, equipped with glue drain, Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, liquids before scraper, flat scraper, polisher, max edge tape thickness in roll: 3mm, max edge thickness for lipping: 12mm, machine in very good condition.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet pipe connection 350 mm length 2000 mm, width 700 mm, height 1950 mm lateral baffles 1 pc. suction pipe D= 350 mm 3900 mm long 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm deflector hood 350 mm Circuit diagram, operating instructions Return air system Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection LxWxH 2150x820x820 mm Rodpfeiau Tzex Afnst 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: good (used), Year of construction: 1995, Semi-automatic edge decoating system, Working height: 900 mm. Rsdpfxsridqxs Afnet Width: 1400 mm, depth: 1200 mm, Max. Height: 1490 mm (up to operating terminal), Weight: 180 kg.

Condition: used, mileage: 77,600 km, power: 103 kW (140.04 HP), first registration: 02/2026, fuel type: diesel, maximum load weight: 1,100 kg, overall weight: 3,500 kg, tire size: 16 Zoll, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, loading space length: 3,360 mm, loading space width: 1,770 mm, loading space height: 1,670 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), full service history, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, sliding door, tachograph, traction control, trailer coupling, The vehicle is in top technical and visual condition. Our vehicles for sale are inspected and serviced in our master automotive workshop. Non-smoking vehicle, ideal for camper conversion, 2-seater. Equipment: Single owner, ABS, ASR, ESP, driver airbag, all-wheel drive, third brake light, electrically adjustable exterior mirrors, electric windows, headlight range adjustment, daytime running lights, remote central locking and immobilizer, automatic differential lock, climate control, hands-free system, multifunctional on-board computer (MFA), electrically adjustable seats, height-adjustable driver’s seat with armrest, ergonomic suspension seat, power steering, adjustable steering wheel, cruise control, rear park assist, front park assist, reversing camera, tachograph, navigation system, DAB radio, Bluetooth, App Connect, sliding door on the right, rear swing doors with window and wiper, summer tires, lashing eyes in cargo area, load compartment cladding, Würth wooden loading floor with tie down points, LED interior lighting, load securing eyes, 16-inch tires, tow bar, DPF EURO6. Gross vehicle weight: 3500 kg Payload: 1100 kg Trailer load: 3000 kg Cargo area dimensions: length: 3.36 m, width: 1.77 m, height: 1.67 m. 1-year Auto Helle warranty in accordance with warranty certificate. Last oil service at 71,580 km at VW. Current roadworthiness inspection. Rsdpfx Asymmp Refnot Complete service history or digital service record. Timing belt replaced at 60,000 km. All repair, service, and preparation costs are included in the purchase price. Financing available. Subject to changes and errors.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Rodpfx Afod Nt N Hsnet Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 80 Edges thickness in stips / lippings (min/max) mm 0,4 / 20 Numerical Control NC21 Rodpfx Ajl Iz Tujfnst Feeding speed m/min 18 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (Hot Melt Glue + Quick Melt system) A20 + A34 Band Pressure zone "C" Edge coils supporting unit (No. 1 reel) Snipping (end-cutting) WK 14 (KW 0.8x2 motors at RPM 12000), pneum. adjust. chamfer/straight Rough Trimming unit Optimat (2 x Kw 1,5) Fine Trimming unit MF20 (2 x kw 0,55) Corners Rounding (contour trimming) Unit FF12 (4 x Kw 0,4) CNC (WD40) Free space for Profile Scraping unit Finish processing unit ( Glue scraper + Buffing unit) FA 10

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) Rodpofd Ilyjfx Afnet - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control Power Control 22 Feeding speed m/min 18 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) QA 34 + PU 34 Band Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Pneu (2 pos.) Rsdpod Nt Nqofx Afnot Rough Trimming unit Optimat (2 x Kw 0,55) Multi Function Unit (Profile contour Trimming unit) FK 13 (2 x Kw 0,4) CNC (revolver 8+8 pos.) Profile edge scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit ( Glue scraper + Buffing unit) FA 11 (Pneu) OPTIONAL: Panels Return System "LIGMATECH" Mod. ZHR 05/L/075 (SOFIT code Z02007)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Rodpfx Aed Scydjfnet Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,2 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi Function Unit (Profile contour Trimming unit) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 08.190 (1 x Kwv 4,5) CNC (90° / 180° / 270°) CNC

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Rsdpfx Afod Rcigsnst Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: excellent (used), To apply bands on edges of straight, round and shaped workpieces - Manual feeding of the workpieces Rsdpfx Aohgbfasfnet - With glue tank and glue spreading roller - With coil/reel holding table - Min/Max thickness of the workpieces mm 16 / 40 - Edge tickness range mm 0.4 to 3 - Tiltable table 0°-45° - Total installed power KW 4 (ca.)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Rjdsflc Uhjpfx Afnst Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Redpfxogbug No Afnet Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Useful working length (min/max) mm 500 (min) / 3000 Rjdpfx Afogvpn Ionjt Separate electric and command panel Total installed motor power Kw 4,3