Used Otec Df70 for sale (751)

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Hsdpfx Apszuyg Re Eofn Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1580000152, total width: 610 mm, total height: 1,300 mm, total length: 690 mm, overall weight: 89 kg, You can find more information in the attached brochure. This is the TAC V+ GR/BK model. Hfjdpfx Apjztwfhe Eon There are 3 air purifiers available. If all 3 are purchased, the total price is €500.

Condition: ready for operation (used), Year of construction: 2006, Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible. Hsdsy S A N Sopfx Ap Eofn

Year of construction: 2020, condition: ready for operation (used), Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available. Hfjdpoucw Tvjfx Ap Eon

Condition: good (used), Position sensor, valve actuator, valve drive, actuator, servo motor Hsdpfx Asb Uhr Ujp Eefn -Type: T 100 a 502 -Weight: 0.3 kg

Condition: used, Sensor, probe, immersion probe -Type: C4P-4/8 -Housing made of: Teflon (PTFE) -Protection class: IP 66 -Cable length: 850 mm -Number: 2x available Hodpfxjd Tpkze Ap Eefn -Price: per piece -Weight: 140 g

Condition: used, Sensor, probe, immersion probe -Type: C2S-4/5 -Housing made of: Teflon (PTFE) Hedpfx Apsd Tqkhj Eefn -Protection class: IP66 -Cable length: 900 mm -Weight: 110 g

Condition: ready for operation (used), Arobotech GC40464A bezel SN: 4046402, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hfsdpfjt D Sl Dex Ap Eon

Year of construction: 2021, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2020. Hjdpfx Aot E Hmrop Esfn The user-friendly key components of the CliniMACS Plus Instrument offer sophisticated applications for a whole variety of separations. The selected stem cells, monocytes, DCs, NK cells, B cells, and T cell subsets allow research in the field of regenerative medicine, adoptive immunotherapy, and graft engineering. Cells are magnetically labeled in the Cell Preparation Bag using an antigen-specific reagent. Subsequently, the Cell Preparation Bag is connected to the CliniMACS Plus Instrument. Intuitive software facilitates target cell enrichment or depletion as well as final collection in the Cell Collection Bag. The CliniMACS System separates large numbers of cells providing target cells with high purity and excellent yield. Electrical: 100-240V, 50/60Hz, 4 Amps, 350VA Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 800 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Hodpfxoulauvo Ap Eefn Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Year of construction: 2022, condition: new, 1 x Niro-Tech all stainless steel fresh meat grinder. Model - WR-130. Output capacity - Up to 3,500kg/h depending on product. Installed power - 9kW. Electrics - 400v, 50hz, 3 phase. Hedshq Rgdepfx Ap Eofn Hopper size - 90 litres. Meat temperature - 0-4degC Comes with a set of 1 x grinder and 2 x cutting blades. Comes with a range of hole plates with 3mm, 5mm, 8mm, 10mm, 14mm and 20mm diameter. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 6-8 weeks for the manufacture of this machine. Videos available on request.

Year of construction: 2025, operating hours: 90 h, condition: new, functionality: fully functional, Our semi-mobile electric stone conveyor for sorting rollable materials such as stones. To be placed directly behind a drum screen for the separation of stones from green waste, compost, or soil. Easily powered via a 16-amp electrical connection. The conveyor angle and belt speed are adjustable. Demonstration unit from 2025 with Hedpfx Ajrhkpzsp Esfn

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. Hjdpfsq Ii Dlsx Ap Eefn - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: S36-0685, (engraving, cutting) Equipment / Additional information: With Rip and extraction system (S. No.: 01422-11122) Hsdpfx Apoxcalvo Esfn Laser type: CO2 // CO2 laser power: 80W Working area: 813 x 508 mm // Loading area: 890 x 600 mm Max. workpiece height: 210 mm with 1.5-inch, 2.0-inch lens 197.5 mm with 2.0-inch spacer lens, 2.5-inch lens 159 mm with 4.0-inch lens Working table: Multifunctional table concept Rulers in mm or inches Electronic, programmable Z-axis with servo motor Max. process speed: 355 cm/s Max. acceleration: 50 m/s² Motor: Brushless DC servo motor Encoder: Incremental Optical elements: Telescope, lens, and mirror Lenses: 1.5-inch, 2.0-inch, 2.0-inch spacer lens, 2.5-inch, 4.0-inch Repeatability: +/- 0.015 mm (0.0006 inches), across the entire work area Addressable accuracy: 5 µm (0.0002 inches) Accuracy of Part size: Dependent on material and process Max. load on the worktable: Static: up to 100 kg / Dynamic: up to 30 kg, load across the entire work surface Interface: USB

Year of construction: 2022, condition: new, 1 x Niro-Tech dual-system twin-shaft paddle mixer. Model - RX-850. Capacity - 850 litres. Hfjdpjhr Rp Iofx Ap Ejn Max product input - 425kg-700kg depending on product. Installed power - 10kW. Electrics - 400v, 50hz, 3 phase. Manual loading valve with magnetic sensor. Pneumatically emptying valve. Manufactured in AISI 304 stainless steel. Brand new, made to order. Supplied with 12-month warranty. Please allow a lead time of up to 8 weeks for the manufacture of this machine. Located in Poland. UK Food Machinery Ltd can organise transport of this equipment to your premises at a supplementary cost.

Condition: used, Large Size Sewing machine Meccanotecnica Aster 2000/51 Fadenheftmaschine - Sewing machine Meccanotecnica Aster 2000/51 Year 1997 - Serial-No. 115208 Pre-loader Meccanotecnica Sistema Large Size  Opening device (4+4) Sheet control Sewing device, Transport chain Thread cutting device Delivery and Plus Stacker with roller conveyor belt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Hfjdpfxoydfhyj Ap Ejn On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2018, The Wipotech EC Weigher is a high-precision dosing system designed for reliable weighing of bulk materials. Perfect for a wide range of industrial applications. Technical Specifications: Hjdpfx Apsx Aiypo Eofn Brand: Other Brands Model: EC Dosing Range: Min. 800g / Max. 2400g Delivery Time: Available This reliable weigher offers consistent accuracy and efficiency, ensuring optimal performance in your production line.

Condition: as good as new (ex-display), TV25-M PROblue Hsdpfx Apoznm Eme Eofn - Mobile polishing and deburring system - Trough vibrator with partition module and soundproof enclosure - Electrical control with stepless frequency control - Integrated dosing pump for process media and additives - Separation and storage unit - Sustainable water treatment Tank volume: 50 liters Usable volume: 36 liters Internal length of the working container: 600 mm Internal width of the working container: 275 mm Internal height of the working container: 325 mm

Condition: new, Year of construction: 2026, HM08 Hydraulic Rotary Crusher Pulverizer for 20-30 Ton Excavators Technical Data - Weight 2180 kg - Maximum opening 785 mm - Width 760 mm Hfsdpszvxb Asfx Ap Esn - Height 2669 mm - Nominal pressure 260-320 bar - Recommended flow 180-200 Lpm

Condition: used, input frequency: 50 Hz, Offered for sale: a lot of 110 mobile air conditioners of various brands and models. Overview of the models in this lot: Portable 51QPD12N7S – 58 units Amcor PCMB 12KE-410 – 21 units Midea MPK-10CEN2 – 18 units PAC 2600 – 11 units Gree KYD-32Na/D – 2 units Hfedjyuyxuopfx Ap Een Total: 110 units This lot is sold as a whole. Please feel free to contact us for more information, pricing or transport options. Worldwide shipping can be arranged.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D Hfodpfxsztvgwo Ap Een - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: new, Year of construction: 2026, Mill for grinding spices, sugar, dried mushrooms, etc. Grinding range: 10 to 120 mesh Hedpfezu Nvhjx Ap Ejfn Capacity: 800 to 1200 kg 30 kW 380 V 50 Hz motor Machine weight: 1200 kg Machine dimensions: 5500 x 1170 x 3160 mm

Condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Hsdpfez Dkh Ujx Ap Eefn

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Hodpfx Apsz D Htgj Ejfn Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Hjdpfxorc Hiis Ap Eefn