Used Oscillator for sale (630)

Condition: used, overall weight: 6,500 kg, operation weight: 6,500 kg, maximum load weight: 6 kg, Year of construction: 2024, operating hours: 627 h, maximum speed: 40 km/h, Operating hours: 627, first registration: 07.11.2024. Basic equipment/technical data: max. lifting capacity 3,300 kg, max. lifting height 6,600 mm, max. outreach 3,500 mm, length to the carrier 4,310 mm, width 2,100 mm, height 2,120 mm, total weight with load forks 6,500 kg, total weight without load forks 6,330 kg, engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 85 kW (115 hp), 2,300 rpm, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR), hydrostatic drive, pump: electronically controlled with variable flow rate, motor: variable displacement motor, EPD TOP incl. with optional automatic speed increase, mineral hydraulic oil HVI 46, transmission: 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optionally 40 km/h, cab: enclosed cab, split door, 360-degree all-round visibility, GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS-tested, heating, front, roof and rear window wipers, sun visor, 4x1 joystick electronic with capacitive release incl. direction switch, telescopic boom 2-part with electronic end-of-stroke damping "Soft Stop", carrier quick-change system type "ZM2" hydraulically controlled from the cab, steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering, drive: permanent all-wheel drive, axles: front axle fixed, rear axle oscillating, braking system: servo-assisted disc brakes on all four drive axles, automatically engaging parking brake when the engine is stopped, hydraulic system: pump with variable flow rate of the type "LOAD SENSING", flow rate working hydraulics: 125 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 171 l/min, working pressure: 210 bar, flow-sharing control block, electrical system: 12 V, battery with 100 Ah, alternator 120A, stability control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection and overload shutdown, tires: 400/70-20, standard equipment: servo brakes, hydraulic oil cooler, rear plate for mounting a tow hitch, hydraulic reversing fan, radio preparation, work lights on the cab (2 front, 2 rear), V2001 preparation for additional function at the boom head, 2 hydraulic connections at the boom head, load protection grid on the carrier, lighting for road travel, automatic battery disconnect switch, electric connecting cable in the boom, acoustic signal when reversing, lifting cylinder support for securing, special equipment: EU approval as a tractor/agricultural tractor 40 km/h incl. trailer coupling, height-adjustable, self-locking, 30/32 mm pin, incl. connection for trailer lighting, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cab roof (approval is the customer's responsibility!), LED work lights on the cab (2 front, 2 rear) instead of the standard halogen lights, 2 work lights at the end of the first arm (main arm), rear hydraulic connection with separate control. Ledpfx Amozdmtpjrsac

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. Ljdpfx Amel Dw D Ejrsac This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, PLAN 10-4c heavy-duty trailer / transport trailer Payload: 25t - 25,000kg Unladen weight approx. 2,240kg Turntable steering with oscillating axles, year of manufacture 2010 Loading area dimensions: 500x200cm, loading height 76cm Very good condition, see photos Forklift available for loading Collection by appointment only in 75053 Gondelsheim Laodpfexmuz Hsx Amrsc Shipping by freight forwarder possible, please inquire with postcode

Condition: new, Year of construction: 2025, Beco Maxxim 260 • Cargo box 5,250x2,300x1,100 mm • Load capacity of 26,000 kg • Hydraulically forced steering on rear tandem axle • Oscillating tandem with air brakes • Manually foldable bumper • Hydraulically suspended drawbar in combination with ALR valve • Aluminium cover flaps • Equipped with 4 work lights • Tyres: BKT 710/50R30.5 • LED lighting all around • Step to cargo box • RDW certified for 40 km/h Condition: New Year of manufacture: 2025 Lodezbl Aljpfx Amroac

Condition: good (used), Year of construction: 1993, functionality: fully functional, Single-spindle lathe TORNOS SAS16-DC, used, in good condition Equipment: - counter-spindle with brake - oscillating stop with counter-operation Ledpfx Amsx Svnuorjac - thread cutting device - 3 independent feed systems - support and reel - bar feeder IEMCA PRA 40/33P

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Ljdjx Iwfmepfx Amreac Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: new, Year of construction: 2026, ‼️SPECIAL OFFER‼️ Shipping rates are increasing significantly. We have prepared for this by bulk purchasing. AVAILABLE IMMEDIATELY‼️WHILE SUPPLIES LAST‼️LIMITED QUANTITY‼️Net price only €12,499 ‼️ FEEL FREE TO CHECK OUT OUR VIDEOS ON OUR WEBSITE! NEW! ✅ TÜV Rheinland 2000/14 CE certified ✅ SOFT HYDRAULICS! Precise and sensitive hydraulics installed. ✅ POWDER COATED, bead-blasted and baked. This provides extreme rust protection, included in our price! ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight. The seat is used by well-known EU manufacturers! ✅ New, larger luxury cab for more legroom. The steel has been reinforced, meeting the current FOPS and ROPS standards! This is very important for your safety. ✅ NEW LIFTING CAPACITY approximately 1200 kg! With an unladen weight of approximately 2300 kg including bucket – speaks for itself! ✅ INCLUDING NATIONWIDE TRANSPORT IN GERMANY! We have our own trucks and a logistics company. DESPITE THE ENERGY CRISIS: TRANSPORT TO YOUR LOCATION WITHIN GERMANY IS INCLUDED! ✅ Up to 7 years warranty* ✅ Nationwide service by experts in our own workshop ✅ We have the standardized hydraulic Euro attachment – not just any quick coupler! ✅ We stock all spare parts in Gemmrigheim. Therefore, we can ship parts within 24 hours. ❗️OUR COMPONENTS - this is what sets us apart from others❗️ ➡️ We have our own factory in China! Check out our website for pictures and videos! ➡️ Hydraulic Euro attachment (standardized EU dimensions) ➡️ Through continuous controls during the production process, we have achieved very high quality. ➡️ Thanks to our know-how and good mechanics, we can also provide prompt and uncomplicated assistance after the warranty period. (Throughout Germany and Europe) ➡️ Our wheel loaders are deliberately designed to be simple and robust without unnecessary features! Technology that everyone understands. ➡️ CE certified and additionally tested according to German UVV guidelines! Technical data: Laedjzf H Sbopfx Amrjc ➡️ Own weight only approx. 2300 kg (incl. bucket) ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W): approx. 4500 x 1610 mm ➡️ Dumping height approx. 2.83 m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Articulated steering with oscillating axle ➡️ Rear view camera ➡️ Spacious luxury comfort cab with air-suspended comfort seat & retractable seat belt ➡️ Enlarged step for easier access ➡️ Windshield ventilation, cab can be heated with fan ➡️ Electric joystick for driving forward and backward with thumb on the joystick ➡️ 3rd & 4th control circuit with separate small joysticks ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ All-round visibility ➡️ Floating function ➡️ Euro 5 engines ➡️ Hydraulic oil cooler ➡️ Additional control for adjustable bucket/fork tilting speed ➡️ Additional fan for hot summer days (both doors can be opened) ➡️ Automatic selection of creep mode and high speed ➡️ 2-stage torque converter transmission, electrically controlled ➡️ UVV NEW 1 year ➡️ Tires as shown in picture 31/15.5/15 with AS profile (not standard 12.5/16) ➡️ Bucket approx. 0.6 m³ (not a standard bucket with 0.38 m³) Optional: ➡️ You can also order the wheel loader with a width of 1.30 m ➡️ Stainless steel exhaust ➡️ Kubota engine (extra charge) ➡️ Bale fork combined with pallet fork Note: we have approx. 1.20 m tines & two forks (approx. 99 cm long). Can be attached and detached. ➡️ Euro attachment with hydraulic locking bolts Errors and omissions excepted Pictures/text may vary *Please inquire about our warra

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT Lsdszb Iuqjpfx Amroac -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Magni ES1823RTP 18m working height scissor lift, suitable for rough terrain, fully electric * Automatic stabilizers for working at height * Standard oscillating axle * Self-locking platform door * Speed limiter at maximum height * Platform overload control * Automatic braking system * Tilt indicator with alarm * Acoustic lowering signal and double LED flashing light * Horn * Emergency stop button * Anchoring eyelets * On-board diagnostics system * Operating hour counter * Proportional control * Folding guardrail * Hoses with explosion protection * Motion alarm * Attachment and lifting points * Double extendable platform * 2 steering wheels * All-wheel drive * Weight-dependent lowering system * Emergency pump * Manual emergency brake release * Hydraulic oil cooling system Capacity 680 kg Max. persons 4 Working height 18 m Platform height 16 m Length 4.88 m Width 2.29 m Overall height (guardrail up) 3.19 m Transport height (guardrail down) 2.49 m Platform length 3.98 m Platform width 1.83 m Platform extension 1.43 m Ground clearance 30 cm Wheelbase 2.86 mm Transmission Electric Inner turning radius 2.35 cm Outer turning radius 5.20 cm Lasdpfx Amsxl Nyuorsc Drive motors 32VAC/9kW Lifting motors 32VAC/15kW Closed speed 6 km/h Open speed 1 km/h Gradeability 40% Max. working inclination 2°/3° Batteries 48 V/450 Ah Charger 48 V / 60 A Hydraulic oil tank 120 l Tires 315/55/D20 Weight 8900 kg Errors and prior sale excepted. Internal vehicle number: R56 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Magni DAB18RT 18m Articulated Telescopic Boom Lift, Diesel Lajdpjxmqx Usfx Amrec * Oscillating front axle * Two travel speeds * 2-wheel steering * 4-wheel drive * 360° rotation (stepless) * Proportional control * Steering wheel button on the joystick * Rotating beacon * Non-marking tires * Horn * Operating hour meter * Kit for extreme environmental conditions * Emergency power supply 12 V DC * Engine Stage V * Integrated special drive axle * Automatic engine shutdown in case of malfunction * Engine backflow prevention * Engine restart protection * Hydraulic oil cooler * Self-leveling * Rotatable +/-90° * Schuko socket 16A/250 V * System for activating travel * Load control system in the platform * On-board diagnostics system * Emergency lowering system * Tilt indicator with alarm * Crush protection Max. working height 18.11 m Max. platform height 16.11 m Articulation point 8.85 m Negative height 1.30 m Negative reach 8.23 m Load capacity 320 kg Max. occupants 2 Max. traversable slope (stowed) 40% Max. working slope X-5°/Y-5° Wind speed 12.50 m/s Turning radius (inside) 3 m Turning radius (outside) 4.73 m Jib length 1.50 m Vertical jib rotation 132° Platform width 0.79 m Platform length 1.83 m Platform rotation 180° Total weight 8,200 kg Speed (closed configuration) 6 km/h Speed (working configuration) 1.10 km/h Tires 315/55D20 Engine Kubota D1105/18.2 kW Diesel tank capacity 115 l Oil tank capacity 145 l Emergency power supply system 12V DC Platform length 7.41 m Platform length (transport) 5.47 m Platform width (with tires) 2.33 m Platform width (transport) 5.47 m Platform height 2.55 m Platform height (transport) 2.59 m Wheelbase 2.40 m Errors and prior sale are subject to change. Internal vehicle number: R59 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Dingli BT22BERT 22.5m telescopic boom lift, fully electric, 2 units available. * Modular design with parts compatibility across the entire product range * Proportional controls * Steering knob on the joystick * Turn signal * Horn * Hour meter * Kit for extreme environments Laodpfx Amoxmqvmjrec * 12 V DC emergency power supply * Oscillating front axle for better stability on any terrain * 4 steerable wheels * 4 driven wheels * All-wheel drive axle with locking differential * 360° rotation (continuous) * Special integral drive axle for construction machinery * Self-leveling work platform * Work platform rotatable by +/-90° * Power outlet on the platform * Drive activation system * Load monitoring system on the platform * On-board diagnostics system * Tilt indicator with alarm * Pinch protection * Emergency lowering system * Lithium battery – maintenance-free * Battery capacity: 80V/420Ah * Charger, single-phase and three-phase 380V & 220V * Charging time from 0 to 100% (hours): 5.5 Max. working height 22.50m Max. platform height 20.50m Maximum outreach 17.28m Load capacity 454kg Max. occupants 3 Max. traversable slope (closed) 30% Maximum working inclination X-5°/Y-5° Max. wind speed 12.5m/s Turret rotation 360° Vertical boom rotation 135° Boom type: regular Length of boom 2.29m Vertical jib rotation 135° Platform width 0.91m Platform length 2.44m Platform rotation 180° Total weight 13300kg Speed (closed configuration) 6km/h Speed (open configuration) 1.1km/h Tires 315/55D20 Oil tank capacity 165l Battery capacity 420Ah/80V Charger type 380V & 220V Charging time, 0 - 100% 5.5h Drive motors 54VAC/18kW Emergency power supply system 12V DC Platform length (transport) 7.25m Platform width (transport) 2.50m Platform height (transport) 2.70m Errors and omissions excepted. Internal vehicle number: R117 WhatsApp support available! If you have any questions about the vehicle or would like further information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Magni DS1218RT Scissor Lift, Diesel, All-Terrain, 2 units available * Automatic stabilizers for working at height * Oscillating axle as standard * Anti-crushing device * Self-locking door on the platform * Speed limiter at maximum height * Platform overload protection * Automatic braking system * Non-marking tires * Tilt indicator with alarm * Audible signal for descent and double LED flashing light * Safety railing for maintenance work * Horn * Emergency stop button * Emergency lowering system * Anchoring points * On-board diagnostics system * Operating hour meter * Proportional controls * Folding guardrails * Power supply on the platform * Pipes with anti-explosion system * Motion warning * Integrated holes for transport with forks * Anchoring and lifting points * Single-sided platform extension * 2 steering wheels * 4-wheel drive * Weight-dependent lowering system * Manual emergency brake release * Hydraulic oil cooling system * Engine restart protection Outriggers available Capacity: 454 kg Max. persons: 4 Working height: 12 m Platform height: 10 m Length: 3.84 m Width: 1.76 m Overall height (guardrail up): 2.59 m Transport height (guardrail down): 1.82 m Platform length: 2.88 m Platform width: 1.52 m Platform extension: 1.43 m Ground clearance: 24 cm Wheelbase: 2.29 mm Inner turning radius: 2.15 m Outer turning radius: 4.85 m Engine: Kubota D1105-EF02 Rated power: 18.20 kW, 3.00 hp at 3,000 rpm Closed speed: 5 km/h Open speed: 0.45 km/h Climbing ability: 40% Max. working inclination: 1.5°/3° Batteries: 12 V Hydraulic oil tank: 71 l Fuel tank: 47 l Tires: 26x12-16.5 Weight: 4,300 kg Errors and prior sale excepted. Internal vehicle number: R104 WhatsApp support available! Laedpfx Amsxmqu Nerjc If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Magni EAB22RT.2 22m Articulated Telescopic Boom Lift, Fully Electric, All-Terrain, 6 units available. * Modular design with parts compatibility across the entire product range * Proportional controls * Steering knob on the joystick * Rotating beacon * Horn * Operating hour counter * Kit for extreme environments * 12 V DC emergency power supply * Front oscillating axle for better stability on any surface Laedoxl Nwtspfx Amrec * 2 steering wheels * 4 drive wheels * All-wheel drive axle with positive traction * 360° rotation (continuous) * Special integral drive axle for construction machinery * Self-leveling work platform * Work platform rotatable by +/- 90° * Power outlet on the platform * Drive activation system * Load monitoring system on the platform * On-board diagnostics system * Tilt indicator with alarm * Pinch protection * Emergency lowering system * Lead-acid battery * Battery capacity: 48V/375Ah * Charger: 48VDC/60A * Single-phase 220V * Charging time from 0 to 100% (hours): 5 Errors and prior sale excepted. Internal vehicle number: R111 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 070139, working width: 1,300 mm, suction capacity: 12,000 m³/h, overall weight: 5,000 kg, workpiece height (max.): 80 mm, Submitting a bid obligates you to collect the item by the deadline of June 22, 2026! TECHNICAL DETAILS Working width, max.: 1,300 mm Workpiece length, min.: 300 mm Workpiece thickness, max.: 80 mm MACHINE DETAILS Traversing system: CNC-controlled with oscillating arms Air supply, spray booth: 12,000 m³/h Extraction: 12,000 m³/h Fan power: 7.5 kW Spray guns: 4 pieces Power, main motor: 15 kW Voltage: 400 V Current consumption: 32 A Total power: 15.6 kW Working pressure, max.: 120 bar Dimensions & Weight Dimensions in assembled condition: 7,000 x 4,300 x 3,200 mm Lajdpfx Amjy Tvc Uorec Dimensions (L x W x H): 11,000 x 2,400 x 2,400 mm Weight: 5,000 kg Transport packages: 4 pieces EQUIPMENT CE marking Spray gun Pump type: Wagner Number of spray booths: 1

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Belt cleaning unit: for 2nd unit Cleaning brushes: Yes Suitable for lacquer sanding: Yes Vacuum conveyor: Yes Feed speed: infinitely variable from 2.5 to 13 m/min Lodpfx Aoytrf Rsmreac Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 690, functionality: fully functional, power: 11 kW (14.96 HP), Equipment: documentation/manual, Multi-functional machine for processing natural stone, ceramics, and artificial stone. PERFECT machine for manufacturing tombstones, countertops, sinks, and for surface brushing/polishing and restoration work! Height adjustment of the Z-axis: 600 mm Lodpfx Ajzd Tckjmroac Z-axis oscillation (programmable) Side grinding gear Articulated arm locking system Pneumatic clamping pressure Variable speed control: 200 rpm to 2,950 rpm S2H oscillating head (brand new with 0 operating hours) Extensive tool set for processing tombstones Work table with tilt adjustment (L x W x H): 2300 mm x 970 mm x 620 mm Manual rotary table for tombstones Note: the offered price is reduced by €2,500 if the oscillating head is not included.

Condition: new, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,410 mm, loading space width: 2,346 mm, loading space height: 1,515 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 2,980 mm, Year of construction: 2026, Equipment: ABS, Wielton Strong Master Hardox steel tipper body with a 26 m³ loading volume HP tipper body Immediately available 30 Years Black Edition Overlapping oscillating tailgate with grain slide New vehicle, immediately available! Unladen weight approx. 5,940 kg Equipment: - SAF disc axles - Axle lift with control line - Automatic tilting lowering - JOST geared landing gears, full load - WABCO braking system - Semi-circular Hardox tipper body - Overlapping oscillating tailgate with lateral tension locks - Grain slide in the center + additional rotating locks - Double pendulum bearing and replaceable rubber seal Lajdpfx Ajzctmhjmrec - Floor 4 mm / side wall 3 mm - Roller cover with quick-release fastener - Operating platform on the frame - Hyva 250 bar hydraulic cylinders - Tires 385/65 R22.5 Hankook TH31 - Aluminum rims ABERG - Rear lights, full LED Aspöck - 2x LED reversing lights - Tool box - Water tank - Shovel + broom - Aluminum ladder Subject to prior sale and errors in this offer. Only the agreements in the order confirmation or the purchase contract are binding. You will receive the exact scope of equipment and prices from our sales staff. Please contact us.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Ledpfx Aezbhuqomroac Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: presumably SRC-N 250-2R Year of manufacture: approx. 2000 Bowl diameter (bottom): 250 mm Bowl diameter (top): 380 mm Bowl internal height: approx. 90 mm Sorting track width: 30 mm Overall height (drive + bowl with sorting track): 405 mm Oscillation frequency: 100 Hz / 6000 min-1 Mains connection: 230 volts, 50 Hz - Control unit RNA, type ESG 90 for adjustable vibration speed - Vibratory bowl with rubber coating - The conveyor was used for feeding automotive fuses Space requirement Ø x H: 430 x 405 mm Weight: 38 kg Good condition A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Lsdpfx Aev D Rg Domrjac Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and Lsdpfx Ajvu Hgbomrjac large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other Laodpet Tqy Esfx Amroc in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds Laodpfsvnv Tqjx Amrsc - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Ledpey Dhudsfx Amrsac

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg Lsdpfxeu R S Erj Amrjac - new exhibition machine -

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Lsdpeu R Tbhsfx Amrsac Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg