Used Mosca Ro-Trp-4 Strapping Machine Packaging Machine Strapping Unit for sale (114,071)

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm Gedpfx Aoz N Hxheivebu bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: repair required (used), Brüninghaus Type F20-E semi-automatic strapping machine. Faulty electronic control unit. Gsdpfx Aijzrx R Nevobu Technical data: - Band width: 12 mm - Table dimensions: ~ 900 x 590 mm - Working height: ~ 760 mm - Power supply: 230 V

Condition: good (used), Year of construction: 2010, Professional automatic strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to approximately 30 straps per minute. -Internal frame dimensions approximately: Clear width 850 x clear height 600 mm. -Secure strapping with 12 mm band. -Automatic band threading. -Band tension continuously adjustable. -Manual release / automatic operation selectable (sensor in the tabletop). -Simple and ergonomic spool changing and threading system. Gbedezuy U Ijpfx Aiveu -Equipped with ergonomic roller conveyors on the table surface. -Machine can be moved using foot rollers. The machine can be demonstrated while powered on.

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Gbedpfjl Hx Rdox Aivou

Condition: used, Packaging system Manufacturer: Mosca Gsdpfx Aiszuz Susvjbu

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A-240401, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 400 mm, overall weight: 450 kg, type of input current: three-phase, total length: 3,000 mm, total width: 1,500 mm, total height: 1,850 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 3 A, cutting height (max.): 140 mm, conveyor belt width: 400 mm, Equipment: compressor, Object A240401. Rebuilt Hoba semi-automatic (hand) packing conveyor with Hoba clip closing set. Hoba hand packaging conveyor, including bag blowing table and Hoba clip closing machines, model Holly SL. Machine direction: Right to Left. Machine information: Total machine length: 3.0 meters Total machine width: 1.5 meters (including bag blowing table). Total machine height: 1.7 meters Machine working height: 0.85 meters Length of input conveyor used: 1.8 meters Length of discharge belt used: 0.85 meters Flight distance: 305 millimeters Machine capacity: 1800 packages per hour. Electrical data: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: Cee-Form 5-pin 16 Amp. (round red plug). Gjdpfx Aijz Eup Sovsbu Compressed air: Yes, required. Minimum and maximum product dimensions: Products from 100 to 400 mm long. Products from 80 to 210 mm wide. Products from 40 to 160 mm high. Machine version: Frame and legs (2) made of painted steel construction, manufacturer Hoba. Deck, guides, and flights are made of stainless steel ASI 304. Brush machine, manufacturer Hoba. Clip closing machine, manufacturer Hoba, Holly SL (clips Kwiklok type JNRP). At the end of the transporter, there is a roller deck, length 0.85 millimeters. Machine equipped with a safety guard at the beginning of the roller deck. Machine stands on wheels (mobile). Fixed carrier speed. New electrical installation on the packing track. Machine is completely rebuilt. Machine description: Packing track, machine suitable for packaging food and non-food products in foil bags.

Condition: good (used), Year of construction: 2004, The used filter dust collector Infastaub MKR 4/20 - 4/20 RO or industrial cassette filter, is a high-performance filter system for efficient process air dedusting. Thanks to its two-stage configuration, the system is perfectly suited for critical and fine dusts – such as pharmaceutical dusts in the particle range of 1 to 10 µm. The integrated rotational cleaning (RO) ensures constantly low differential pressures and maximum service life in continuous industrial operation. Name: Cassette filter Manufacturer: Infastaub Type: MKR 4/20 - 4/20 RO Year built: 2004 -Max. volume flow: Up to 6,000 m³/h -Filter area: Total 160 m² (80 m² in the 1st stage + 80 m² in the 2nd stage) -Number of chambers: 4 chambers -Filter classes: Stage (cleanable): H13 (HEPA – 99.95% separation efficiency) Stage (safety stage): H13 to U15 (ULPA – up to 99.9995% separation efficiency) -Residual dust content: values down to < 0.001 mg/m³ -Max. operating temperature: +80 °C -Cleaning: pneumatic via compressed air pulse (approx. 6 bar compressed air pressure) -Dimensions (approx.): length 3,800 mm × width 1,150 mm × height 2,300 mm -Net weight: approx. 4 tons -Voltage: operating voltage 400V / 50Hz, control voltage 24V DC -Material: stainless steel Gbodpfxemzat Hs Aivsu -Raw gas collecting duct ∅ D6: 315 mm, M6: 700 mm -Technical doc.: Yes -Accessories: Control -Condition: Used-good -Price: On demand

Condition: good (used), MERKLE Insquare W 300 AC/DC Welding Machine with original hose kit Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Gbedpfjl Sm Hbox Aivsu Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding processes: Selector switch, 10 levels: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular, TIG AC "Balanced TIG", Electrode Negative, Electrode Positive, Electrode "Sine wave", Electrode Rectangular Selector switch 1, 10 levels: Current 1, Time 1, Ramp-up and ramp-down time, Start current, End current, Ignition pulse, Spot time, Pre-flow and post-flow time Selector switch 2, 9 levels: Current 2, Time 2 (for pulse operation), AC Balance, AC Frequency, Hot start time and current, Current regulation, Electrode diameter, Display U Settings: 2 potentiometers for selector switches 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: Selector switch, 4 levels: OFF, Pulse slow, Pulse fast, Spot welding Ignition: Selector switch, 4 levels: OFF, High frequency, Lift-Tig Energy control: Selector switch, 4 levels: on the machine, Hand or foot control, Welding torch Operating mode: Selector switch, 4 levels: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations, freely assignable AC frequency: 50-200 Hz AC balance: 9-91% Gas pre-flow time: 0-3 s Gas post-flow time: 0-25 s Current ramp-up time: 0-2 s Current ramp-down time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Pulse slow: 10 ms-2.5 s Pulse fast: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200% Current regulation: 100-250% Button: Test protective device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Ramp-up, Current 1, Current 2, Ramp-down, End current Power source: IGBT inverter Ignition: High frequency or Lift-Tig Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin plug Torch cooling: Water-cooled Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with gas cylinder holder Gas cylinder holder: 10 - 20 - 50 l gas cylinder You can find more items - new and used - in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control 📦 Product Size Capability Blister Pack Sizes: 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Installed 2021 Gbedpfxsyzf Uco Aiveu Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Some tables in the videos/photos are not included No printers are included

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing Godpfx Aisz Nc Nnevobu This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Gbsdpfxsz I Inaj Aivsu Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Controls: Siemens SIMATIC touchscreen, PackML Drives: SEW, servo-controlled Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Machine number: 2511

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Gbsdpsza T A Rofx Aiveu Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Year of construction: 2003, condition: good (used), Smicon PT 1500 – Fumigation / Fumigation System Fumigation involves filling a space with a toxic gas to control pests/bacteria. Because toxic gases are used, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses in ports, silos, mills), and also in churches to control woodworm. This is a device used for disinfecting spaces. Formaldehyde is heated on the left hotplate and, together with condensed water (right hotplate), is introduced into a room via an airflow, where it kills all bacteria. Gsdpfx Aiju Ny Ncovjbu Former list price: €9,900 You can find more new and used items in our shop! International shipping costs available upon request! Item condition: used

Condition: good (used), overall weight: 400 kg, Skinetta ASK 450 Stretch Banding Machine Intended Use of the Machine The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink-wrapping machines, the film is pulled tightly around the package before sealing. This tightening is the main advantage of this process, reducing film consumption by up to 20%. Godpep U T Ifjfx Aivjbu A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering. The film is sealed (welded) in a very small area, creating a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the protruding film overhang can be reduced laterally. This increases the stability of the container and prevents individual products from falling out sideways in correspondingly grouped containers. With suitable additional devices, a complete closure of the containers is possible by sealing, crimping, and folding the film laterally. The SKINETTA stretch banding machine program includes six basic models for film widths from 25 mm to 200, 290, 440, 590, 790, and 1250 mm. To increase output, two- to four-lane systems are available in addition to the single-lane version. - With the SK series (semi-automatic), the products are grouped on the machine table by an operator. Insertion into the film and the subsequent stretch banding process is triggered either by a foot switch or a two-hand control. Full automation is possible at a later date (except for the SK 200 model). - With the ASK series (fully automatic), the products are fed, grouped, and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming and special equipment based on over 20 years of experience allows adaptation to the most diverse customer tasks with proven standard elements. Technical Data Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 V Power consumption: 6.1 kW Additional equipment: slat chain conveyor You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Vertical Vacuum Machine Boss Vakuum V 810 VA Professional vertical vacuum machine Boss Vakuum V 810 VA – ideal for liquids, powders, and stand-up pouches You are bidding on a used, extremely powerful, and fully functional vertical vacuum machine from the quality brand Boss Packaging Machines (model V 810 VA). This industrial machine is specifically designed for the vertical vacuum sealing of large stand-up pouches, liquids (such as soups, sauces, oils), granules, and powders. Thanks to the vertical design, spilling or shifting of the pouch contents during the evacuation process is effectively prevented. Gjdpfx Aisz Dtdxsvsbu Technical data: Chamber internal dimensions: 850 x 670 x 200 mm (W x D x H) Sealing length: 810 mm (large sealing seam for maximum pouch widths) Vacuum pump: High-quality Busch rotary vane vacuum pump Control: Intuitive Z 3000 sensor control with up to 99 program memory slots Liquid protection: Equipped with an H2O sensor for automatic boiling point detection (prevents boiling over/splattering) Connection: 3 phases (400V high voltage) External dimensions: 1070 x 1000 x 1980 mm / 2200 mm with the lid open Weight: approx. 470 kg "Everything from one source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: Gsdpszt Nbzofx Aivsbu - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Gbodpfx Aisz Ntr Ievou Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg

Condition: used, This listing is for a Quickpouch Automated Form-Fill Seal Packaging Machine with Videojet Dataflex Printer for Quickpouch Auto loader. Gbodpfx Asxzg Hqsivju Manuals are available on request.

Condition: good (used), Year of construction: 1997, Strapping machine, packaging machine -Semi-automatic: Pallet strapping -on: built-in transport frame -Voltage: 230 V Gbodpfx Aod R Ak Tsivsu -Dimensions: 650/800/H1250 mm -Weight: 102 kg

Condition: excellent (used), Year of construction: 2020, Cyklop, Twinpack 111 (combination of a stretch wrapper and a strapping machine) – used: Price ex works: €39,500 (net), plus dismantling costs, etc. Manufacturer: Cyklop Type: Twinpack 111 (combination of a stretch wrapper and a strapping machine) Year of manufacture: 2020 Gedpfx Asz Dtq Seivebu Operating hours: approx. 300 hours Original new price: approx. €76,000 (net) Condition: good to very good, little used Available: immediately Location: Dillingen

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, winding roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine -Roll: Ø 150 x 2040 mm -Shaft: Ø 44 x 330 mm Gsdpjxmi Hwsfx Aivsbu -Drive wheel: Ø 198 mm / Dimensions see photos -Dimensions: Ø 200 x 2680 mm -Weight: 50 kg

Condition: used, VC999 single-chamber vacuum packaging machine – pre-owned Mobile single-chamber vacuum machine from VC999 (Inauen Maschinen AG, Herisau, Switzerland), stainless steel floor model on castors with an oil-lubricated VACFOX rotary vane pump. Key features - One spacious vacuum chamber with a raised filling plate to set the product height - Seal bar across the full chamber width, suitable for bags up to the full width of the chamber - Oil-lubricated VACFOX rotary vane pump: deep final vacuum and a long service life - Mobile floor model on castors, easy to move around the production floor - All-stainless housing, built to take daily cleaning - Digital control with programme memory: vacuum, seal and venting times stored per product Applications - Meat and cured meats - Fish and seafood - Cheese and dairy - Ready meals - Butchers, fish processors and foodservice Benefits Gsdpfoz Hqycsx Aivebu - Extends the shelf life of the product - Protects quality and freshness - Swiss build quality, made for intensive use - Mobile, so you can use it wherever it is needed - STC keeps parts for vacuum machines in stock Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Single-chamber vacuum machine Condition: Pre-owned Design: Mobile floor model on castors Vacuum pump: VACFOX rotary vane, oil-lubricated Seal bar: One seal bar across the full chamber width Material: Stainless steel Origin: Inauen Maschinen AG, Herisau (Switzerland)

Condition: used, Webomatic CL-C 950 chamber belt vacuum packaging machine – condition: as new The CL-C 950 is the entry-level model within the WEBOMATIC CleanDesign range and enables fully automatic bag packing with very little manual work. The patented Roll-Back-Lid allows the inside of the lid to be cleaned quickly and thoroughly without exposing the conveyor belt to cleaning fluids. Key features Gbodpfxez Hqxxs Aivsu - Chamber of 1,050 × 850 × 285 mm (l × w × h), suitable for large pouches - 950 mm seal bar across the full width - Conveyor belt for automatic product feed-through - Patented Roll-Back-Lid for fast and thorough cleaning - Mitsubishi PLC with colour touchscreen - WEBOMATIC CleanDesign construction Applications - Meat and meat products - Fish and seafood - Cheese and dairy - Ready meals - Medium to large batch production Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Chamber belt vacuum packaging machine Condition: As new Chamber size (l x w x h): 1,050 x 850 x 285 mm Seal bar length: 950 mm Control: Mitsubishi PLC with colour touchscreen Lid: Roll-Back-Lid (patented by Webomatic) Design: WEBOMATIC CleanDesign Application: Fully automatic packaging of products in pouches

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 16238, total length: 12,600 mm, total height: 1,500 mm, total width: 1,475 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 80 mm, product length (min.): 80 mm, product length (max.): 200,000 mm, product width (max.): 450 mm, product width (min.): 14 mm, input voltage: 400,230 V, working height: 900 mm, overall weight: 1,900 kg, input frequency: 50 Hz, space requirement width: 3,000 mm, This machine was bought in 2015 and has only been installed, calibrated and tested. We have never been in commercial use. Has only been stored in our room temperated warehouse. We planned to use it for own production, but not all plans are realized. So this is a brand new packaging machine with roller conveyers and heat tunnel. All documentation is avaliable. The machine is located in Norway and can be inspected and tested here. Gedezzybhspfx Aivobu We paid € 70.000,- for this machin inclusive heat tunnel and roller conveyors in 2015

Condition: used, Year of construction: 2006, functionality: fully functional, Automatic strapping machine. Gbedpfx Ajz Dp Rneivju