Used Mini Film Waste Pelletizing Line for sale (16,124)

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data Ibjdpoz D S Sbefx Afuoc - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: excellent (used), fuel type: electric, Year of construction: 2024, Drivetrain Drive: Track Weights Empty weight: 500 kg Functional Lifting capacity: 1.200 kg Dimensions of cargo space: 140 x 80 x 42 cm CE mark: yes Ibedpfx Afezlrcfouoc Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: NL Additional information Please contact Vink Machinery for more information Hoeflon TC 1 with turntable * 2024 * Battery drive * 360-degree turntable * Remote Control * One-hand operation * 1200 kg lifting capacity * 500 kg own weight

Condition: excellent (used), lifting height: 16,400 mm, Year of construction: 2021, operating hours: 796 h, Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg Dimensions of cargo space: 315 x 75 x 195 cm CE mark: yes Condition Iedpfx Afozi Azmeuobc Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2026-01-15 Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6 * 2021 * 796 operating hours * Diesel (Yanmar) and 230 Volt drive * Equipped with all options * 16.4 meter working height * 14.4 meter horizontal reach * 3150 kg lifting capacity * 2800 kg own weight * Remote Control * Articulated outriggers * Including documents

Condition: used, power: 49 kW (66.62 HP), fuel type: diesel, first registration: 10/2018, Year of construction: 2018, operating hours: 7,900 h, Caterpillar 308 E2CR – CW10 quick-change system – additional rotation function – engine 49.7 kW – total weight 8360 kg – dozer blade – operating hours 7900 h = Further information = Iedoz E D A Uopfx Afuebc Drive: Track Unladen weight: 8,360 kg CE marking: yes Reference number: 85 Serial number: CAT0308EPFJX11724 Please contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Video: Machines and Equipment 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute Ibedpfx Aoz Ri N Eefuoc 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Ibodpfx Ajz Ri Riofujc Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: new, functionality: fully functional, power: 10.2 kW (13.87 HP), fuel type: diesel, fuel tank capacity: 15 l, color: red, overall weight: 1,500 kg, empty load weight: 1,450 kg, operation weight: 1,500 kg, lifting height: 2,740 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, operating hours: 1 h, Equipment: additional headlights, adjustable chassis, cabin, parking heater, rubber tracks, OFFER!! €15,000 net!! Special offer: Only €15,000 net – including 3-year warranty, comprehensive spare parts supply, warranty & post-warranty service, and dedicated customer support. KINGWAY DEUTSCHLAND e. K. is the main dealer for the Kingway brand in Germany. We serve the entire German market and all neighboring countries, delivering machines to any destination worldwide. If you need a transport quote, have questions about our machines, or are interested in establishing a dealer network in your country, contact us! We offer a huge range of machines and sell over 3,000 units annually. If you are interested in additional models, please visit our website where you are sure to find the right machine for your needs. MINI EXCAVATOR YAMA S15K - KUBOTA TECHNICAL DATA: Machine weight: 1,500 kg Bucket volume (3 buckets included): 0.03 m³ Engine model: KUBOTA Engine power: 18.4 kW / 25 hp Number of cylinders: 3 Ibjdev Av Idopfx Afuoc Oil cooler: Yes Swing arm: Yes Extendable tracks: Yes Maximum climbing ability: 35º Pump type: Gear pump Pressure: 16 MPa Hydraulic oil flow: 25 l/min Maximum speed: 2 km/h Platform rotation speed: 9-10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 L DIMENSIONS: Length: 2,550 mm Width: 1,100 mm Height: 2,310 mm Bucket width: 1,160 mm Bucket height: 210 mm Track width: 920 mm Track shoe width: 230 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Maximum digging height: 2,740 mm Maximum dumping height: 1,750 mm Maximum digging depth: 1,800 mm Maximum vertical digging depth: 1,320 mm Maximum digging radius: 2,400 mm Minimum swing radius: 1,550 mm Maximum dig radius at ground level: 3,227 mm Maximum height of raised dozer blade: 325 mm Maximum depth of lowered dozer blade: 175 mm PRICE: €13,500 net €16,065 gross - INCLUDES 3 digger buckets (200, 400, 800) - For machines regularly serviced by us, we EXTEND THE WARRANTY to TWO YEARS - 12 MONTHS FREE WARRANTY - after this period, all original spare parts available on demand! - FREE delivery within a 200 km radius - VAT-free sale possible (with valid VAT ID) - FINANCING available - We are always at your service! - We have our own mobile and stationary service teams, available for all our customers at any time.

Condition: new, functionality: fully functional, power: 7.35 kW (9.99 HP), color: yellow, empty load weight: 1,000 kg, shovel volume: 0.2 m³, 3-YEAR WARRANTY!! Ibjdpew Ufr Hjfx Afusc Modern Mini Excavator JOKER RS – professional grade and built to last. The JOKER RS model is the ideal equipment for demanding construction, electrical, plumbing, renovation, and service companies in related industries. The JOKER RS is additionally equipped with a swing boom, significantly facilitating work in confined spaces. We also guarantee service for the equipment after the warranty period has expired. The mini excavators are manufactured under the supervision of European technicians. The machine features a robust design and can be used in all conditions. TECHNICAL DATA: - Operating weight: 1000 kg - Bucket capacity: 0.02 m³ - Engine: Koop - Number of cylinders: 1 cylinder - Power / RPM: 10 hp at 3000 rpm - Maximum torque: 23.8 Nm at 3000 rpm - Maximum digging reach at ground level: 2890 mm - Maximum digging reach: 2940 mm - Maximum digging depth: 1650 mm - Maximum dumping height: 2600 mm - Maximum discharge height: 1970 mm - Maximum vertical digging depth: 1320 mm - Blade lift above ground: 325 mm - Blade drop below ground: 175 mm - Hydraulic lines for: hammer, auger DIMENSIONS: - Wheelbase: 910 mm - Track length: 1235 mm - Machine width: 930 mm - Track width: 180 mm - Track height: 320 mm - Total length: 2310 mm - Total height: 2195 mm PRICE: €6,302 net €7,500 gross - INCLUDES 3 digging buckets (20 cm, 40 cm, 80 cm) - For machines that are regularly serviced by us, we extend the warranty to three years (Warranty only applies to machines purchased directly from us—not from other dealers) - FREE 12-month WARRANTY – after this period, we supply all original parts as needed! - We offer our own mobile service reaching all our customers in Germany and beyond - FREE delivery within a 200 km radius - SALE POSSIBLE EXCLUDING VAT (with valid VAT ID only) - FINANCING available KINGWAY DEUTSCHLAND e.K. is the exclusive stationary distributor of the Kingway brand in Germany. Only with us can you view and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe as well as the main office of Kingway in Germany. We keep a large selection of machines in stock—around 70 models always available. We supply machinery across Germany, Austria, Switzerland, Italy, and other neighboring countries. Customers enjoy full access to all spare parts. Schedule an appointment and come for a test drive!

Year of construction: 2015, condition: used, Table dimensions: 1250x800x1200mm, connected load: 4kW, length: 1000mm, width: 1850mm, height: 1600mm, with documentation, no maintenance has been carried out, an on-site inspection is possible. Iodpfxez Sr N Ro Afusbc

Condition: good (used), Washing machine: GTA, year of manufacture: 2003 Press: ZP 3.1, year of manufacture: 1995 Sealing unit: VFL-1D/27. Year of manufacture: 2009 Dosing unit: DOS-1PSD. Year of manufacture: 2009. Material: polysulfide. Main components: Glass washing machine with inlet and outlet up to and including the gas press, inspection station, gas-filling press with outlet up to the end of the automatic sealing unit, automatic sealing unit. System configuration: see sketch Max. glass height: 2700 mm Max. glass length: 3500 mm The washing system’s drives have been refitted with new bearings. This very well-maintained system is still in operation. Viewing is possible by appointment. Ibedpfx Afjz Scaneuoc Condition: good, second-hand

Year of construction: 1995, condition: used, A decoiling, straightening and stamping line with roller feed, straightening machine, decoiler and hydraulic press is available, 1) Roller feed WV-U-80/DSM 300 P-N, working direction: left to right, max. strip width: 300mm, strip thickness: 0.1-5mm, max. strip cross-section: 1,000mm², roller diameter: 80mm, max. feed speed: 120m/min, max. roller contact force: 4.5kN, feed accuracy: ±0.05mm, adjustable pneumatic pressure: approx. 5bar, 2) Straightening machine RSTC W60/7/300, working direction: left to right, passage width: 320mm, max. strip width: 300mm, strip thickness: 0.4-5mm, max. strip cross-section: 1,050mm², straightening and correction roller diameter: 60mm, feed roller diameter: 80mm, strip speed: 0-30m/min, feed rollers: 4, straightening rollers: 7, correction roller: 1, drive power: 3kW, 3) Decoiler E 3000/300 OMB, working direction: left to right, max. load capacity: 30kN, expansion range: 470-520mm, max. coil outer diameter: 1,500mm, strip width: 300mm, main shaft height above floor: 1,000mm, weight: 1.2t, 4) Hydraulic Single-Column Press Dunkes, pressing force: 125t, including documentation. On-site inspection is possible. Iodpfxez R A Rpj Afuobc

Condition: used, Year of construction: 2009, A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible. Ibjdpfxoz S Ivyo Afusc

Condition: used, For export only! Ibjdpfxez Nc Hyo Afuec ECRM Mako56, film imagesetter, 50/70 format, HQ-RIP ECRM Mako46, film imagesetter, A2 format, HQ-RIP ECRM Mako3650, high-speed film imagesetter, A3 format, HQ-RIP

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Iedjyb Tuispfx Afuebc Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: Ibodpfxexabpds Afuoc - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: used, Year of construction: 2016, operating hours: 4,098 h, 2016 | Wacker Neuson 50Z3 with 3 excavator buckets | Used Mini Excavator < 7t | 4098 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Isdpfey D T A Tjx Afuebc 60 inspection points 55 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition, moderate play in the boom, cleanup bucket needs redoing. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39893 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Brochure: Horizon SPF 20a Trimmer: FC 20a Ibsdpswz Skqefx Afusc

Condition: used, Molding line for filled products such as cordon bleu (fresh weight 100gr) The fresh weight per portion is ± 100 grams. The main components are 48 grams of ground meat 10 grams of processed cheese 10 grams of sausage or ham the rest is breadcrumbs consisting of: “Risco Brevetti” vacuum filler Type RS303 (filler-grinder) with loader for Eurobins with meat grinder heat (Filler-Grinder), Type RS 70 BJ 2010 filler-grinder opening 2 filling strips on top of each other of 90 x 5 mm + MasterSlice “Marel - Stork” Type 1511 Slicer for sausage or ham bars caliber 50 mm + “Karl Schnell” vacuum filler Type 596 P 10 SE Iodpfxszzkz Es Afusbc Used to fill the processed cheese linked to the Masterfill + “Marel” MasterFill Type MTFU Takes the processed cheese from the Karl schnell vacuum filler and portion it + “Marel” MasterFormer Type TA1521 Using virtually no pressure, the MasterFormer system produces high quality filled and unfilled products with a handmade look and retention of structure and texture of meat mass. The MasterSlice and MasterFill modules allow solid, liquid and paste fillings to be added to the meat mass in the MasterFormer supply line. The MasterFormer offers a wide variety of end product possibilities with minimal waste of ingredients and maximum flexibility, including cordon bleu or steak haché. Features : · Ultra low-pressure forming, to retain structure and texture of meat mass · Fully automatic production of filled and unfilled products, with a handmade look · MasterSlice adds cut-to-measure slices of solid filling to the basic raw material · MasterFill is used to add liquid or paste fillings · Minimal waste of ingredients · End products can be packed directly onto trays or, alternatively, are ready for further processing · Easy to operate and clean in good condition in good working order The machine is fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: used, Year of construction: 2014, operating hours: 732 h, Equipment: all wheel drive, MAKE: GIANT TYPE: D 254SW YEAR: 2014 CE MARKED: YES OPERATING HOURS: 732 HOURS Isdozv Iw Tspfx Afuebc TIRES/UNDERCARRIAGE: 60% POWER: 16KW ENGINE: KUBOTA D902 WEIGHT: 1100 KG OPTIONS: HYDR. QUICK ATTACHMENT BUCKET PALLET FORKS 15 KM/H EXTRA FUNCTION ORIGINAL HOURS KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,8 x 1,8 x 1,6 m Ibedpfx Afey N D Nbouoc

Condition: used, Newtec H3013MD 13-Lane Linear Weigher with Elevating Belt – Double PCS (2013) The Newtec H3013MD is a high-capacity 13-lane linear weigher featuring an integrated elevating belt and a Triple PCS (Portion Collection System). This dual collection system enables significantly higher throughput by collecting and discharging two weighed portions simultaneously, making it an excellent solution for high-speed fresh produce packing lines. Designed specifically for products such as potatoes, onions, carrots, tomatoes, citrus fruits and other fresh produce, the H3013MD combines accurate weighing with gentle product handling and exceptional reliability. The hygienic stainless steel construction and proven Newtec technology make it a popular choice for demanding packing operations. Technical Specifications - Manufacturer: Newtec - Model: H3013MD - Type: 13-lane linear weigher with elevating belt - Serial number: 10729 - Year of manufacture: 2013 - Power supply: 400 V - Phase: 3 Ph - Frequency: 50 Hz - Current: 9 A - Number of weighing lanes: 13 - Lane length: 730 mm (13x) - Gutter width: 95 mm (13x) - Weighing basket dimensions: 140 × 95 × 170 mm (13x) Key Features - 13 independent weighing lanes for accurate portioning - Double PCS (Portion Collection System) for increased output and higher packing speeds - Integrated elevating belt for continuous and even product feeding - Gentle handling of delicate products - Hygienic stainless steel construction - Easy access for cleaning and maintenance - Suitable for a wide variety of fresh produce applications - Proven Newtec technology known for its reliability and accuracy - Easily integrated into existing packing lines The machine is in good overall condition and is available for inspection. Additional photos, videos or a live demonstration can be provided upon request. Contact us for pricing, availability or additional information. More photos and full specifications: / Iedpfezilitsx Afuobc * Manufacturer: Newtec * Model: H3013MD * Serial number: 10729 * Year of manufacture: 2013

Condition: excellent (used), lifting height: 22,000 mm, Year of construction: 2022, operating hours: 2,329 h, Empty weight: 4.700 kg Lifting capacity: 3.990 kg Dimensions of cargo space: 430 x 80 x 193 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: NL Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Ibjdpfxozlha Te Afujc Hoeflon C10 * 2022 * Diesel and 400 Volt drive * 2,329 Operating hours * Fly jib * Hoisting winch max 4,000 kg * Non-marking tracks * Remote control * 22 meter hook height * 19.8 meter horizontal reach * Unlimited swing rotation * Recently replaced slewing ring * 3,990 kg lifting capacity * 4,700 kg dead weight

Condition: new, Year of construction: 2015, Complete Knapp Fastline System RA2519 _____ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. _____ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0,75 m/s RollerDrive curves 11 units Interroll DriveControls 277 units available Iedpfxezwylre Afuobc _____ High-quality industrial design The KNAPP Fastline series is one of the proven modular conveyor systems for automated material flows. The system was developed for the continuous transport of cartons and containers and is suitable for use in: • Distribution centers • Shipping logistics • Production logistics • E-commerce • Replacement or expansion of existing conveyor systems Thanks to its modular design, individual conveyor sections can be used just as easily as complete system components. _____ Scope of Delivery The scope of delivery includes, among other things: Conveyor Technology • Approx. 300 meters of roller conveyor systems • Accumulation roller conveyors • Drive roller conveyors • Conveyor modules of various lengths • Conveyor curves Curves • 11 RollerDrive curves Drive Technology • 277 Interroll DriveControls EC310 Steel Structures • Extensive support columns • Column bases • Connecting elements Pneumatics • Pneumatically controlled accumulation stations • Pneumatic assemblies • Sensors Documentation • Original KNAPP parts lists • Transport and package lists • Documentation of the main assemblies _____ Technical Concept The system is based on the modular KNAPP Fastline system. The material being conveyed is transported on roller conveyors. The storage bins are pneumatically controlled. Thanks to the modular design, conveyor routes can be easily extended or adapted to new warehouse layouts. A key advantage is the use of commercially available industrial components, ensuring that replacement parts will remain available in the future. _____ Premium Manufacturer KNAPP is one of the world\'s leading manufacturers of automated material flow systems. The system is not a custom-built or specially designed solution, but rather based on an industrial mass-production platform. _____

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Ibjdpfx Afjvth Ausuec

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg Ibjdpfon Utt Hsx Afujc This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).