Used Miltenyi Biotec 200-073-903 for sale (16,851)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) Pjdpfxjz Iqp Te Akisgu F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change Pgodpfx Ajz Irr Askiou FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Pgjdpfx Akoz Ar R Doieu Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: W6378-04A, Uraca PÜV 8/200 safety valve, bypass valve, overflow valve (pneumatic and silicone-free), similar to, but not a Hammelmann, Woma, or Kamat. Permissible operating overpressure: 50-200 bar Recommended flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg Pedod D Aghepfx Akijgu with MADER PEU-063-0010-I-P-M Year of manufacture: 2012 (unused) Suitable for use with demineralized water. Electro-pneumatic control: Takes over the switching command and pressure setting of the valve. Gap seal: Ensures the exact reproducibility of the actuation pressure. Further technical data can be found in the data sheet. Maintains the operating pressure independently of the nozzle configuration. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high actuation reproducibility, high actuation dynamics, cone can be used on both sides.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, power: 560 kW (761.39 HP), pressure: 6 bar, heating capacity: 560 kW (761.39 HP), temperature: 120 °C, Heating container, Viessmann Vitoplex, 560 kW, oil burner, heat exchanger. Pedjz Umxxspfx Akiogu

Condition: used, Hermle Z 200 A Centrifuge – Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A can accommodate up to 12 x 15 ml tubes with conical and round bottoms. Specifications: Capacity: max. 12 x 15 ml / 6 x 50 ml Speed: max. speed/RCF: 6000 rpm / 4185 xg min. speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: button-controlled in 250 rpm increments Speed display: preset and actual speed – digital Run time: max. time: 30 min. / continuous operation min. time: 0.5 min. Preset: 0.5 - 30 min. / “Hold” Time setting: 0.5 min. increments via button press Time display: remaining time – digital Brake: fixed braking force with soft stop Features: - Microprocessor-controlled - DC motor, covered - ABS plastic housing, impact-resistant and chemical-resistant Safety: - Lid locking system - Automatic imbalance detection with safety shut-off - Manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inches): Width: 28 / 11.0 Height: 26 / 10.2 Pgjdom Albdspfx Akieu Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges – new and used – in our shop! International shipping costs available upon request!

Condition: used, Bosch Turbo Scara SR6 Articulated Arm Robot + Rexroth MA4/200-7301-M + RH04.0S Controller   The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideally suited for assembly tasks and fast pick & place movements.   The TurboScara SR6 and SR8 are articulated arm robots (Scara robots) with four axes and the following advantages:   • Minimal cycle time with the highest precision • Large working area and various stroke lengths • Defined mechanical interfaces • PC-based control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces maintenance • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; now with BAPSplus: graphical programming interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation   Technical data:   Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Max. moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (axis 4) continuous/max 5/10 Nm Weight: 48.5 kg   Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s   Cycle time (cycle 25-300-25): < 450 ms   including controller   Controller consisting of the following components:   Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S   Swivel range / technical data see image   Since the item is available in multiple quantities and the robots have different working tools, these are only sample images and may vary.   Item condition: used   (Changes and errors in the technical data are subject to change!)   In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Pgodeiuzqtspfx Akiou   Workshop equipment, workbenches, tool carts, tools, and forklifts are plentiful.   In total, 24,000 m² of production space will be dismantled and sold.   Please also note our other offers.   Payment is due within 7 working days of purchase.   You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Heid S-200 CNC lathe - Manufacturer: Heid - Type: S 200 - Machine type: CNC lathe Pjdpfx Aksx Elw Eoiegu - Tailstock travel: 175 mm - Tailstock quill mount: - Morse taper: 4 MK - Quill stroke: 140 mm - Quill diameter: 95 mm - Thrust force: 17 kN - Connection 50 Hz 3-phase: 380 volts - Total power requirement: 65 kVA - Spindle speeds: - Continuously variable from 0 rpm to: 4000 rpm - Spindle bore: 77 mm - Tool shank cross-section: 25x25 mm - Turning diameter over the bed: 420 mm - Maximum turning diameter: 250 mm - Turret: - Longitudinal travel (Z-axis): 1150 mm - Cross travel (X-axis): 230 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Erlab Captair Filtair 936 Filter Fume Hood The ductless, filtering chemical fume hoods from Erlab offer the most powerful filtration worldwide and guarantee safety and performance. A system with countless advantages that provides comprehensive protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance parameters of the fume hood and ensures your safety at all times. Advantages Pgsdpjyk Dq Hsfx Akieu Perfect user protection Filtration safety: All models of the captair@ filtair filter fume hood comply with the AFNOR NFX 15-21 Class II standard. Retention of chemical vapor pollutants in the work area, guaranteed by controlling the air velocity at the front and complying with the standards for pollutant retention (XPX 15203, BS 7258, DIN 12927). Sampling valve for the exhausted air enables the user to monitor the filter saturation at any time using color reaction tubes (not included). The front and door made of acrylic protect against any chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Sloped front for a better view of the work process. Well-designed openings for the hands provide the user with plenty of freedom of movement in the work area. Stuffing boxes for inserting electrical or power cables into the work area. Work position adapted to the user. Very low noise level (49 dBA). Transparent walls for a good overview of the work processes in the work area. Easy installation / Energy saving No exhaust duct required; a power outlet is sufficient. Direct installation in your laboratory or on an optional mobicap" rolling table. Energy saving, through the recycling of the purified air from the unit without consuming heated or cooled air. Erlab/Captair Filter Fume Hood Filtair 936. Connection values: 230 V. 50 Hz. 94 W Safety class 2 Air flow m³/h: 200 m³/h Air inlet velocity front m/s: 0.51 Filtration type S Filter 960-961. Safety class 3 Class for pollutant retention B 2 fans Analog flow meter Noise level approx. 51 dB(A) External dimensions: 110x84x74 cm Internal dimensions: 87x82x73 cm Volume of the work area m³: 0.432 Two handles in the front window Available filters: MF and VF CE marking. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, CATALOGUE NUMBER: MR001 - New machine, DTR documentation + CE marking TECHNICAL DATA - Effective width: 2000mm - Front width: 2500mm - Depth: 600/850mm - Height: 1700/1950mm - Max. capacity: 9000m3/h - Fan power: 1.1kW - Speed: 2780 rpm - Electrical parameters: 400V-50Hz - Diameter of the outlet pipe – square: 500x500mm - Cardboard pre-filter - “Paint-stop” filters - Dimensions (L/W/H): 2500x850x2200mm - Weight approx.: 250kg The stated price applies to the standard version. Dry walls are used to extract mist from painting or coating processes. Pgjdpfex Uz Rmox Akieu Extraction and purification of contaminated air is carried out by a dual filtration system consisting of: cardboard filters at the front of the machine and a “Paint-stop” filter. The wall is constructed from modular panels made of galvanized sheet metal. Equipment: – Painting wall with a two-stage filtration system (Paint Stop filter and Andrea filter) – Extension for the painting wall, increasing the width from 2000mm to 2500mm and the height from 1700mm to 1950mm – Multi-plane adjustable damper – Atex fan 9,000 m3/h – Soundproofed fan housing – Internal silencer, shape 380×700 L – 600 mm – Roof/wall exhaust outlet – side – Gasket for connecting exhaust ducts – Screw for connecting extensions and ventilation ducts Optional: – Fan power regulator – Mechanical filter – replacement of the cardboard filter with a steel mechanical filter – Third stage of filtration – adding a third stage of filtration using a synthetic fiber filter, to further purify the filtered air. – Ceiling with lighting – Internal silencer, shape 500 x 500 mm L – 600 mm – Wall extension (increasing the working area) – Recessed enclosure (increasing the working area) – Supply air system – Ventilation ducts – Connection fitting 600×600 – 135-degree elbow exhaust outlet (directs air downwards at a 45-degree angle) – Vertical exhaust outlet 500×500 with a reduction from 600×600 (discharges air vertically upwards, so that it rises several meters above the outlet and spreads evenly) Also available: Painting wall PRO 2000/1700/600 with 10,000 m3/h / 300 Pa explosion-proof radial fan – 1.5kW motor – 14,600 PLN / net, with the option to choose the fan arrangement on the right/left or rear side of the wall. Net price: 11,600 PLN Net price: 2,700 EUR depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Glasbeek Finish Gas Chamber Furnace, Type 003.05 Manufacturer: Glasbeek Finish Type: Gas Chamber Furnace Heating Medium: Natural gas Type 003.05 Includes loading cart Maximum temperature: 200 °C Burner type: Forced draft burner Manufacturer: Dreizler Type: M 06.2-95 Type: Forced draft burner Modulating operation Burner output: 40-110 kW Gas family: Natural gas Category: 12L Connection pressure: max. 100 mbar Power connection: 220/230V / 50 Hz Motor power: 0.27 kW Electrical power consumption: 0.6 kW Pgjdpsd Spx Djfx Akisu Combustion chamber pressure: 1.6 mbar Burner number: 0201756 Year of manufacture: 2002 Dimensions Internal dimensions approx. W1900mm x D2950mm x H1800mm External dimensions approx. W2530mm x D3300mm x H2800mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Forklift attachment – drum grabber Suitable for 2 x 200-liter steel drum/steel lid drums Description: Secure grip, even on uneven surfaces Stable, welded steel construction Forklift attachment module with a robust powder coating in blue (RAL 5010) Quick and easy mounting on the forklift Automatic locking when lifting the drum Automatic release of the clamp when lowering Safe handling of steel drum and retaining ring drums Height-adjustable Technical data Surface: Hot-dip galvanized Application: Lifting/transport of steel drums External width [mm] 1050 External depth [mm] 1080 Pgedpsxbq Irofx Akiou External height [mm] 975 Fork pocket spacing [mm] 730 Fork pocket W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate description 1 2006/42 DECLARATION OF CONFORMITY Weight [kg] 110 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Bosch Turbo Scara SR6 Articulated Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideally suited for assembly work and fast pick & place operations. Pjdpfxehtrdco Akisgu The TurboScara SR6 and SR8 are articulated arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and various stroke lengths • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is easy to learn and enables the creation of clear and understandable programs; new with BAPSplus: graphical programming interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN-I/O modules • Expandable via the VTS02 solenoid valve system with CAN connection for time-saving installation Technical data: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (axis 4) continuous/max 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S You can find more new and used items in our shop! International shipping costs on request!

Condition: new, CATALOGUE NUMBER: HZ0001 PRODUCT FEATURES As standard, the units are equipped with mobile sawdust containers, featuring a clamping system that allows for a tight connection between the container and the machine structure. This enables the achievement of high vacuum levels without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with a quick discharge option, which have a special suspension system and mobile wheels for easy and fast transport and maneuvering. The 5.5 kW / 6500 m3/h vacuum fan, operating at 2,800 Pa, functions based on a turbine principle, and the sound-dampened fan design allows for a significant reduction in noise emissions during operation. A certified control cabinet enables continuous monitoring of correct operation, thanks to the possibility of placing it remotely from the machine. As standard, it comes with an integrated system for controlling the operation of the fans and a system for cleaning the filter fabric. ADVANTAGES - New machine Psdpfezrk Rhjx Akiogu - CE certificate - High performance - Professional Scope of supply: Polyester filter, 5 microns 2 containers Mobile undercarriage Filter cleaning using a vibration system with control TECHNICAL DATA - Extraction capacity approx. 6500 m3/h - Motor power 5.5 kW - Rotation speed 3000 rpm - Voltage 400V, 50Hz - Extraction nozzle 280 mm - Filter area 16.3 m2 - Extraction speed 28 m/sec - Number of filters 35 - Vacuum 2800 Pa - Filter category G - Filter material polyester - Dimensions L/W/H 921x1982x2271 mm - Weight 350 kg Net price: 17,400 PLN Net price: 4,050 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (the price may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2017, power: 10 kW (13.60 HP), input current: 25 A, Q-FIN FIERDE 200 Manufacturer: Q-FIN Type: FIERDE 200 Year of manufacture: 2017 Technical details: Max. passage width: 200 mm Min. part dimensions: 10 x 10 mm Feed speed: 1.2 – 10 m/min Power supply: 400 V / 50 Hz Rated current: 25 A Connected load: 10 kW Pgjdpfez Ic Axjx Akiju Through-feed grinding machine with extraction system Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection value: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 6750 TO 6000 EUR!!! Psdjyvfkrepfx Akiegu

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202019236, empty load weight: 5,675 kg, maximum load weight: 26,325 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 10/2026, next inspection (TÜV): 10/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,030 mm, suspension: air, tire size: 435/50 R19,5", color: yellow, Fine-grain steel welded construction, fifth-wheel coupling plate with replaceable 2" kingpin - Slightly inclined outer frame with "Load-Lock-Profil" for securing straps - Note: When securing straps in conjunction with side boards, the side boards must be opened! - Single-side operation of landing legs, straight lower section, without thrust compensation - Side-mounted door retainers, aluminium side underrun protection, galvanised steel rear underrun protection - Heavy-duty pallet stop on both sides, approx. 20–25 mm high, lashing points every 200 mm; loading height reduced by approx. 20–25 mm - Spare wheel, same make as standard tyres - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) # Axles and suspension - BPW disc-brake axles - Air suspension # Braking system - Dual-line compressed-air braking system - Spring-loaded parking brake - 2 misconnection-proof coupling heads at the front, without connecting lines - EBS electronic braking system with front EBS socket, without connecting cable - Warning: This trailer may only be towed by tractor units that ensure the effective operation of the ABS! - With raise/lower valve - Vehicle driving stability system # Wheels and tyres - 435/50 R19.5", make at manufacturer's discretion # Electrical system - 24 V, multi-chamber lights, yellow LED side lighting - Yellow LED side lighting with 20 LEDs per lamp - 2 white front position lights Pgjdpfx Ake Aay Sboiou - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, without connecting cable - LED safety light, mounted at the top of the rear corner posts - Approx. 30 mm thick screen-printed floor panels, cross joints with Omega inserts, on longitudinal bearers for high point loads; maximum forklift axle load 7,100 kg # Front bulkhead / corner posts - 2,580 mm high, steel corner posts in high-volume design # Centre posts - Pair of sliding posts, movable along the full length, with four-way sockets and a long lower socket - Pair of post positions # Insert boards - 4 rows of aluminium V-shaped insert boards # Rear wall / corner posts # Curtain - Curtain with welded-in horizontal and vertical tensioning straps # Roof - Sliding roof, rear end lift-up section; roof can be slid from rear to front; L-shaped roof rail for the automotive industry; internal width between roof rails approx. 2,490 mm; curtain colour: white - EcoLift lifting roof, raises by approx. 380 mm, assisted by gas struts - Front with 2 driving positions: - Front internal height approx. 2,900 mm / 3,000 mm # Operating instructions - If the overall height exceeds 4,000 mm, please note the following: - The transport operator is solely liable for any resulting damage. - The driver transporting the vehicle must obtain a permit under Section 29 of the German Road Traffic Regulations (StVO). - We accept no liability for transporting the vehicles. - Note: The specified gross weight is technically possible; depending on the load, it may not be achievable while complying with the permitted axle and fifth-wheel loads. # Registration / plates - Germany - With DEKRA inspection and report - Load securing certificate to EN 12642 XL (valid only in conjunction with 4 rows of aluminium boards) - Additional DC 9.5 certificate, pallet stops on both sides, approx. 25 mm high; loading height reduced by approx. 25 mm; warning panel to ECE Regulation 70

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: Pgjdpfsymf Rtsx Akiou • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 Pgedpewcdt Hjfx Akiou -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Condition: excellent (used), Three-jaw chuck Make: Forkhardt Type F 200 Diameter 200 mm Short taper mount KK 8 Taper diameter 139.7 4 stud bolts M 16 Pitch circle diameter 171.4 Through hole 52 mm Psdpfx Akovwk Eaeiegu Weight 24 kg

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant BT40 Tooling Mazatrol 640M control 30 Tool magazine 12,000 rpm main spindle full set of manuals Pgsdpfx Aev Txpljkiou This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: like new (used), Pneumatic meat bin lift Lift is designed for loading the product placed in 200 l meat bins (type U-200) Material: Stainless Steel Podpfx Asinup Dokijgu Model: 200 liter Unloading height: 1.240 mm Capacity: 200 liter or 300 liter Dimensions (LxWxH): 1.800x900x1.930 mm Weight: 250 kg.

Condition: excellent (used), Year of construction: 2005, 19 stations design: cassette shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm Psdpfx Aksh Tm Raoisgu

Condition: excellent (used), Year of construction: 2005, dual track rollforming line 2 x 18 stations design: cassette shaft Ø: 30 mm Pjdeh Tm Rljpfx Akijgu strip width: 200 mm strip thickness: 1 mm

Condition: used, Vise Pgedpsdd Tpiefx Akisu Jaw width 200 mm Jaw height 80 mm Base plate: width at the bottom 250 mm Length at the bottom 500 mm Opening width 250 mm Weight 72 kg