Used Mecal Mc 305 for sale (2,645)

Condition: used, total length: 6,690 mm, Year of construction: 2024, load capacity: 65,000 kg, · Antrieb: Vorderradantrieb, N°2 Elektromotoren AC 20 kW 96 V. Isolationsklasse H. · Abnehmbare Kontergewicht: Kg. 17.500 · Batterie: 96 V - 1550 Ah, 8 Arbeitsstunden · Lenkung: über die Hinterachse, Lenkwinkel 90°/90° · Elektronische Lastbegrenzung · Automatisches Bremssystem an allen Rädern · Hergestellt aus vorgefertigten und verschweißten Stahlplatten · Auslegerwinkel +65°/-5° · Elektropumpe 2x 35 kW - 96 V AC. Isolationsklasse H · Vorderachse Antrieb mit gegenläufiger Bewegung · Proportional ausfahrbarer hydraulischer Ausleger · zwei unabhängige Lenkeinheiten · Kontergewichte, die ohne extra Gerät montiert / abgenommen werden können Podpfozf Rk Ijx Ahdogn · mechanisch neigbarer Auslegerkopf mit 3 Positionen

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm total power requirement 5,5 kW Pgeded Ih Stspfx Ahdon weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: like new (used), functionality: fully functional, power: 20 kW (27.19 HP), gearing type: hydrostat, fuel type: electric, color: blue, overall weight: 13,700 kg, empty load weight: 13,700 kg, operation weight: 13,700 kg, lifting power: 11,000 kg/m, lifting height: 10,000 mm, tire size: Voor 315×70-15 | Achter 250×70-15, tire condition: 90 %, axle configuration: 4x2, number of seats: 1, first registration: 02/2014, mast type: telescopic, Year of construction: 2014, operating hours: 286 h, Equipment: adjustable boom, crane, hydraulics, === MAIN SPECIFICATIONS === Year of manufacture: 2014 Operating hours: 286 h Max. lifting capacity: 11,000 kg Total weight: 13,700 kg Power: 2 × 10 kW (80V electric motors) Drive type: Electric (battery 80V – 830Ah) Transmission: Front axle via gear reducer Steering system: Rear-wheel steering, hydraulic with load-sensing system Boom: Hydraulic telescopic boom (2 sections) Max. boom angle up: +60° Max. boom angle down: −10° Drive system: Electric with electronic speed control (MOSFET type) Tyres: Front: 4 × 315×70-15 | Rear: 2 × 250×70-15 (non-marking) Brakes: Hydraulic service brake, automatic parking brake Hydraulic system: Gear pump, 22 MPa maximum pressure CE certification: Yes (2006/42/CE – 2004/108/CE) Country of origin: Italy === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and use Fully electric drive – zero emissions Hydraulic telescopic boom with two extensions Non-marking tyres, suitable for indoor use Includes hydraulic winch, enclosed cab, and working lights Pjdpfxjxn Sm Ao Ahdegn === CONDITION === Excellent condition – only 286 working hours. Crane fully tested and ready for immediate use. Available from stock. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price €89.999 (EXW / excl. VAT). The JMG MC 110 is a powerful electric industrial crane with a lifting capacity of 11 tons and a high-strength telescopic boom. Thanks to its electric drive, compact size, and non-marking tyres, this machine is ideal for use in production halls, warehouses, and maintenance environments. The MC 110 combines precision, safety, and zero emissions — a reliable solution for indoor lifting operations. === DELIVERY === Crane loading available on request for smooth handling during shipment. Flexible delivery options tailored to your destination and logistics preferences. All shipments are professionally handled by the logistics team of Collé Rental & Sales.

Condition: excellent (used), -Dimensions: 510x875x1400 mm -Serial number: 300758E -Condensation: Water -Refrigerant gas: 502 -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorbed power: 2.55 kW -Maximum motor power: 1.90 kW -Protection: IP22 -Minimum water pressure: -Min: 200 (2 atm) -Max: 400 (4 atm) -Power: 5.60 kW -Voltage: 380 V Pjdpfx Ahewxu R Uodogn -Weight: 115 kg

Condition: used, -Dimensions: 800x875x1400mm -Serial No.: 3215621 -Refrigerant Gas: 22R -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorption resistance: 2.55 kW -Maximum motor power: 1.90 kW -Protection: IP22 -Class: N -Minimum/Maximum water pressure: 200 (2atm) - 400 (4atm) Min.KPa -Voltage: 380V -Power: 5.60 kW -Weight: 252kg Pgedpfxsxyh Igj Ahden Used Bravo Trittico 305 Professional Ice Cream Machine: Unleash Your Creative Craft The used Bravo Trittico 305 Professional Ice Cream Machine is much more than a simple ice cream maker. It is a true tool for creative artisans, enabling you to produce a wide range of sweet treats—from smooth custards and refreshing sorbets to rich chocolate ganaches. This versatile machine is engineered to handle all your patisserie and frozen dessert needs. -The Trittico Exécutive Evo is the ultimate multifunctional machine, bringing together high-end craftsmanship and advanced technology. -The workshop you’ve always dreamed of, contained in less than one square meter! The Trittico® Exécutive Evo embodies the art of artisan gelato, fine pastry, international gastronomy, and chocolate-making. It is equipped with an electronic control system that automatically manages numerous standard programs and allows for full customization according to each artisan’s needs. An indispensable collaborator: precise, reliable, tireless, and consistent! FEATURES: -Ionic System® evaluates the texture and volume of ice cream by detecting—the amount of crystallized water in the mixture, thanks to sensors positioned in the freezing cylinder. -Dual inverter for the upper tank and multi-speed agitator -Option to work with the Ionic System®: software-controlled speed guarantees the best results for ice cream and sorbet, as well as optimal mixing for pastry products. -Option to operate with adjustable extraction temperature -Multiple recipes for gelato, chocolate, and pastries Outstanding Versatility

Condition: used, total length: 4,630 mm, Year of construction: 2024, load capacity: 13,000 kg, - Antrieb: Vorderachse über zwei 8,5 kW 80V AC Elektromotoren, Isolationsklasse H. - Batterie: 80V – 900 Ah mit Lade- und Batteriefüllstandsanzeige. Arbeitszeit bis zu 8 reinen Kranstunden. - Bremsen: Automatisches Bremssystem wirkend auf alle Räder. - Rahmen: Gefertigt aus soliden Formteilen und verschweißten Qualitätsstahlplatten. - Reifen: Vorne no. 4 superelastisch 300x15” Hinten no. 2 superelastisch 200x15” - Ausleger: Gefertigt aus soliden Formteilen und verschweißten Qualitätsstahlplatten, Aufgebaut in 4 vollhydraulischen Teleskop-Elementen. Auslegerwinkel: +65°/-5°. - Hydrauliksystem: Angetrieben durch leise Zahnradpumpe (19kW), Isolationsklasse H - Hydraulikbedienung über Joystick und Hebel an der Funkfernsteuerung - Filter und Sicherheitsventile - maximaler Betriebsdruck 22MPa. Pgodpozfq Dhofx Ahden - Lenkung: Über Hinterachse mit Elektromotor. Lenkeinschlag +90°/-90°. - Motorpumpe: Elektromotor 19kW 80 V AC, Isolationsklasse H. - L.M.I.: Elektronische Lastbegrenzung “CE Standard” - Mit Sicherheitsleuchten und folgenden Displayanzeigen: Angehobene Last, Maximal zu hebende Last, Prozentuelle Lastanzeige, Arbeitsradius, Auslegerwinkel, Gewähltes Programm. - Eigengewicht: 14.000 KG davon 4000 KG abnehmbares Kontergewicht. - Abnehmbare Kontergewichte: Entwickelt für schnelle De- und Remontage, um jederzeit die Boden- und Achsbelastungen zu optimieren. - Funkfernbedienung: Auf alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen. - Kran Klassifizierung nach UNI ISO 4301 - 1: A3

Condition: used, total length: 4,630 mm, Year of construction: 2022, load capacity: 13,000 kg, Crane JMG MC 130S Drive Electric Year built 2022 Lifting weight (kg) 13,000 Pgedpfx Aszfq A Rjhdjn

Condition: used, Year of construction: 2020, machine/vehicle number: P3245, operating hours: 1,060 h, Load capacity max. 2,820 kg, working radius max. 820 cm, hook height approx. 870 cm, L/W/H 332x75x147 cm, combined diesel/electric drive 400 V, diesel engine Yanmar 2TNV70-NMBA 7.4 kW, 2,500 rpm, electric motor fully encapsulated and fan-cooled (5.5 kW 4P 400V), own weight approx. 2,160 kg, crane hook MAEDA SCM 435 (load capacity max. 2.79 t), remote control. Pgodpozhayqofx Ahden

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Pgedjyx U Hispfx Ahdon Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation

Condition: used, Brand : CMZ Model : TBI 520 MC Cnc : FANUC 18i-TB with Manual guide Yom : 2005 Times operation: 1371h Pedpfezczacsx Ahdjgn Distance between centres: 1.100 mm Swing over bed: 520 mm Ø Max. Turning: 420 mm X Travel X : 296 mm Z Travel : 1090 mm Rapid Feeds (X, Z Axis): 18 m/min Rapid Feeds (Z Axis): 24 m/min Max Speed of the Head: 3000 rpm Spindle Bar Diameter: 82 mm Chuck Bore Ø: 95 mm Spindle Max. Power : 22 kw Number turret positions; 12 (VDI-50) Number positions of Driven tools 12 Driven Tools Speed 4000 rpm Max Power Driven Tools 8,5 kw C Axis and Driven Tools INCLUDED Hydraulic Steady Rest installation: INCLUDED Tool Presetter INCLUDED 2 Axial Driven Tool Holders INCLUDED 2 Radial Driven Tool Holders INCLUDED Installed Power 50 KVA Equipped with chip conveyor

Condition: new, total length: 6,042 mm, Year of construction: 2026, load capacity: 45,000 kg, Crane JMG MC 450S Drive Electric Pgedpfezd Hu Hox Ahdon Year built 2026 Lifting weight (kg) 45,000

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Pedpfeyxx A Iex Ahdegn Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, turning length: 532 mm, turning diameter over cross slide: 500 mm, turning diameter: 325 mm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, travel distance X-axis: 195 mm, travel distance Z-axis: 430 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total length: 2,875 mm, chuck outer diameter: 260 mm, total width: 1,675 mm, spindle nose: A2-8, overall weight: 4,650 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have acquired this HWACHEON HI-TECH 200BL MC directly from production in working condition—see the video of the machine operating prior to dismantling. The machine is very comprehensively equipped and comes standard with: - C-axis + driven turret (both positions). - Renishaw probe. - Chip conveyor + collection bin. - Röhm 3-jaw chuck (DURO-NC 260/3) including 2 sets of top jaws. - 13 EWS toolholders, 4 of which are driven. - Various clamping sleeves and collets. - Original HWACHEON and FANUC documentation. The machine can be inspected under power in our showroom! Pjdpfx Ahjypc H Rsdegn

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T Pgedszg Hc Nopfx Ahdon

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW Pgjdjt Hwyropfx Ahden weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m Pgjdpfx Ahot Hwtfodon

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Podot Hw H Espfx Ahdjgn Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1990, x-travel 500 mm Psdpot Hwy Eefx Ahdjgn y-travel 300 mm z-travel 350 mm total power requirement 12 kW weight of the machine ca. 3800 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Psdpfx Ahjt Hwrhsdsgn Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 400 mm Pgedpfot Hwx Ijx Ahden z-travel 350 mm total power requirement 40 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC-Steuerung Pgsdpfxozc Dzve Ahden Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. Pgedpfx Aeywua Tshdjn If you have any questions or require further information, please feel free to send us a message or give us a call. The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: excellent (used), power: 20 kW (27.19 HP), fuel type: electric, color: other, lifting height: 11,000 mm, mast type: telescopic, Year of construction: 2024, operating hours: 66 h, Drive: Wheel Empty weight: 19.800 kg Dimensions (LxBxH): 540 x 207 x 200 cm Psdpjw I Hrbsfx Ahdsgn Lifting capacity: 16.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Lifting hooks - Work lamp(s) = Remarks = General Country of production: Italy Condition CE type: CE Remote control, Manual Jib

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 930 mm, spindle motor power: 15,000 W, total height: 2,100 mm, overall weight: 10,400 kg, controller manufacturer: FANUC, controller model: 18i, number of axes: 7, This Muratec MT 25 MC Lathe was manufactured in the year 2001 in Japan. It is equipped with a Fanuc 18i CNC control unit and has 7 axis. The machine has a spindle speed of 40-4000 rpm. Additional equipment • Bar loader multifeed, maximum bar length 1.5 meters. Machine Benefits Qualitative Machine Benefits • Tailstock does not have but the second spindle has torque control and can perform the torque control and can perform tailstock function. Technical Machine Benefits • Maximum chuck size: 254 mm • Max. Turning length 300 mm • Max. Turning diameter 380 mm • Length between centers 920 mm • Spindle nose a2-6 • Spindle inside diameter 67 mm • Max. Turning diameter x in manual 340 mm • Max. Turning length z in manual 920 mm • Max. Turning diameter x in automatic 340 mm • Max. Latheable length z in auto 920 mm Dimensions Machine Depth 2300 mm Pgodpfx Aex D N I Aohdsn

Year of construction: 2022, condition: used, Uplifter mini crane MC 285-3 CWME, lifting capacity 2,820 kg at a radius of 1,400 mm. Maximum lifting height: 8,700 mm. Maximum working radius: 8,200 mm (at a load of approx. 150 kg). Equipped with assembly jib and transport cart UPT 200. Less than 100 operating hours. Storage location: at customer site. Pgsdeytrd Tepfx Ahden