Used Mass International Srl Peripheral Device for sale (21,142)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) Kledpfxjyzr Nms Abljt • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Klodpfeiidr Rjx Ablot -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02 -Dimensions: 265/125/H100 mm -Weight: 2.0 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 330/125/H50 mm Kjdpfeiidrxox Ablslt -Weight: 0.9 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Kedpfjiidr Hox Ablolt -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg

Year of construction: 1994, condition: good (used), Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi LEA SRL. Control module from Bierrebi TA 103 automatic cutting machine. -Board: LEA SRL. Type LEA 1032 2.028.01.065.01 -Dimensions: 370/90/H28 mm -Weight: 0.4 kg Kodpjiidrbjfx Abljlt

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Klodpsiidrqofx Ablet -Circuit board: LEA SRL. Type LEA 1004 2.028.01.063.02 -Dimensions: 400/100/H50 mm -Weight: 0.4 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 Kedpfx Abeiidrujlolt -Dimensions: 360/130/H60 mm -Weight: 1,3 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Kledpfx Abjiidr Ajlet -Circuit board: LEA SRL. Type LEA 1016 2.028.01.061.02 -Dimensions: 360/130/H60 mm -Weight: 0.4 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Kledpfeiidrmsx Abljt -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm -Weight: 3 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 -Dimensions: 265/125/H100 mm -Weight: 2.0 kg Klodpfx Abeiidr Uelet

Condition: good (used), Image processing control unit, camera control Kjdpfxoxvp S Ee Ablelt -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Year of construction: 2021, condition: used, functionality: fully functional, complete 3-stage washing system, entirely made of stainless steel 1st stage: washing with hot water 2nd and 3rd stage: rinsing with cold water Kjdpfsyxgppsx Ablolt workpiece passage height 2100 mm, depth 800 mm

Condition: excellent (used), Printing International Cristal 90X2 Kljdpfsv Iyh Sex Ablst

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 2879, We offer this used Colussi Ermes SRL L001-027 steam-powered trolley cleaning machine (smoking/cooking) made of stainless steel, year of manufacture 2016. Klsdpfx Aoydn Shjblst If you have any questions or need more information, please do not hesitate to send us a message or call us.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Good day, We are pleased to offer you, without obligation, a used, self-propelled stretch/wrapping robot (pallet wrapper), manufacturer PKG, model Motion. Manufacturer: PKG SRL Model: Motion Year of manufacture: 2018 Maximum rotation speed: 93 m/min. Battery specification: Standard AGM/gel batteries 12V – 110Ah; both batteries were replaced at the end of last year. Charging cycle: 8-10 hours Pallet dimensions: minimum 500 x 500 mm, maximum unlimited Maximum wrapping height: 2,200 mm Minimum wrapping height: 500 mm Turning circle radius: 1,100 mm Electrical connection for battery charger: 230V, 50Hz Charger: High-frequency charger integrated in the machine Machine weight: approx. 400 kg Film: Type: Machine stretch film Roll diameter: max. 250 mm Roll height: 500 mm Roll weight: approx. 20 kg Note: The above technical data were taken from the operating manual, manufacturer brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1 used stretch/wrapping robot (pallet wrapper), type Motion by PKG SRL, without film rolls. Application area and condition: Kjdsyg Nyxepfx Ablolt The machine was used in a picking and shipping department for stretch-wrapping palletized goods. The unit is fully operational, in good condition, and can be inspected and tested under power. Both batteries were replaced at the end of last year. Remark: The machine will be available for collection from March 2026. Until then, the robot will remain in use. We would be delighted if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: G-233F | G-203, Used Triotech G-203 Bubble Tester/Leak Detector Set/System Manufacturer: Trio-Tech International G203 Model: Trio-Tech G-233F Filtration system, Trio-Tech G-203 System with several tools, filtration system, stainless steel control unit, several baskets, air pump. Klsdpfexiwb Usx Ablot Power: 220 volt. Table not included

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder _____ Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. Kljdpfxsynkwno Ablet _____

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation Klsdpowv Eazjfx Ablot

Condition: good (used), Year of construction: 2017, dispersion and UV varnishing sheet size min 152x152 mm Klodsyv Dm Hopfx Ablst max 760x760 mm paper thickness 0.1 - 1.2 mm UV varnish dispersion varnish 120 g/m² without surface treatment and higher 150 g/m² with surface treatment and higher 200 g/m² with surface treatment and higher automatic setting time 5 minutes automatic washing time 10 minutes Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes 8.5” x 11” / 215 mm x 280 mm sheets width 12,700 sheets/hour 12” x 18” / 305 mm x 450 mm sheets width 9,900 sheets/hour 14” x 21” / 355 mm / 530 mm sheets width 8,800 sheets/hour 21” x 30” / 530 mm x 750 mm sheets width 6,300 sheets/hour 28” x 40” / 710 mm x 1020 mm sheets width 5,000 sheets/hour Painting speed 4,600 B2/hour anilox rollers for the machine 3;9;12;18 Automated Set-up Time 5 Minutes Automated Wash-up Time 10 Minutes UV drying IR drying (suitable for dispersion varnish and primer for HP Indigo) kit for processing thin materials varnish application using a chamber doctor blade high feeder 2 independent varnish circuits with automatic washing Anti-Ghost system innovated sheet delivery system

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Kledpfx Aboyln D Telot

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, HORIZON SPF-200A Booklet Making Line | VAC-100 + FC-200A + ST-40 Description: For sale: complete Horizon booklet making line consisting of collating, stitching, folding, trimming and stacking modules. Reliable Japanese production system, ideal for commercial print shops. The machine is fully operational and currently installed in production environment. ---- Configuration includes: Air-suction collator: VAC-100a + VAC-100m Stitching & folding unit: SPF-200A Fore-edge trimmer: FC-200A Stacker delivery: ST-40 ---- Technical specifications: 1. Collator (VAC-100a / VAC-100m): Voltage: 230 V Frequency: 50 Hz Current: 10.4 A (each tower) Feeding system: air suction Configuration: 2 towers x 10 bins 2. Stitcher & Folder (SPF-200A): Voltage: 230 V Frequency: 50/60 Hz Current: 3.4 / 3.2 A Functions: saddle stitching (2 heads) folding booklet production 3. Trimmer (FC-200A): Automatic fore-edge trimming Inline operation with SPF-200A High trimming precision 4. Stacker (ST-40): Voltage: 230 V Frequency: 50 Hz Current: 4.7 A Automatic sheet stacking ---- Condition: Good working condition Complete production line Currently in use Total counter: approx. 1.8 million booklets ---- Advantages: ✔ Complete booklet production system ✔ Renowned brand: Horizon ✔ Inline workflow ✔ High productivity ✔ Reliable and easy to operate ---- Additional information: Klodpfey Axdaex Ablet Machine can be inspected in operation Test production possible Assistance with installation available Availability: to be agreed

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Kledjylynwopfx Ablst Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: excellent (used), Dough divider. Kjdpfov Szubox Ablslt Manufacturer - Friul Co srl. Type - M44/700. Portion weight - 300-650gram. Capacity - 70-400kg/h. Container capacity - 44liter. 230V, 50hz, 1300W, 6.5AMP. Dough rounder. Manufacturer - Friul. Type - R10. 230V, 50hz, 370W, 2.4AMP. Elevator included. CLH.24

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Ksdswty Etspfx Abljlt

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Kjdpfxoxcx Ame Abljlt