Used Marcelissen Sorter / Sorting Device for sale (11,824)

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Withdrawal device: for square notching dies -Dimensions: see photos Gujdpfoznk R Tsx Ag Tsh -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Gusdpfx Agozh D S Re Tjh Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Level limit switch, level measuring device, sensor, switch, level transmitter, limit level detector, limit switch, level switch, level sensor, level evaluation unit, level indicator -Manufacturer: Endress+Hauser, level indicator unit, original packaging -Type: Silometer FMC 320 Gsdpfx Agjzmuqnj Touh -Item No.: 922496-0500 -Voltage: 220 V -Cardboard dimensions: 125/90/H80 mm -Weight: 0.5 kg

Condition: used, Weinig anti-twist device for hydraulic tools at maximum clamping length Technical data: - Thread: M44x1 - Right-hand thread Gujdpfx Agezrxq No Tsh

Condition: used, Year of construction: 2000, length 1000 mm Gedpfx Agszpbmnj Touh width 1250 mm height 2600 mm

Condition: good (used), Manufacturer: Zoller Gujdpfx Agozwxq Te Teh Type: V420 / 606 Year of manufacture: 1993 Control system: Zoller 6051 Mount: SK40 Measuring range, X-axis: 1,500 (300) mm Measuring range, Z-axis: 450 mm Magnification: 20x Fine adjustment: +/- 5 mm Projection area: 80 mm Air pressure: 6 bar Weight: approx. 150 kg Dimensions: 1,400 x 800 x 1,300 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4407, Technical data: IHF Jungenthal manipulator handling device, lifting aid, lifting arm Model Vector 180 (180 kg payload) Payload at full extension 75 kg (dependent on equipment/configuration) Height: approx. 3.75 m Upper arm length: approx. 3.2 m Reach: approx. 1.5 + 1.35 + 0.8 m = 3.65 m, articulated arm (height 2 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 750 kg Dowel plate 75x75 cm Attachment/mounting equipment for round material/shafts, etc. (see images) Swivel range 360° Godpfx Ajzv E Dwog Tjuh Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See images Shipping by freight forwarder or collection only after prior arrangement.

Condition: ready for operation (used), Schunk Tribos SVP2 Clamping Device – Quick-Change System You are welcome to visit us for a demonstration. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. Gjdpfxezyrcze Ag Tsuh The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 24-month warranty Stainless steel model Advantages: + Excellent price-performance ratio + Simple and quick installation and operation + Housing made entirely of stainless steel + Can also be combined with an ice water system + Unit automatically opens the required water supply, providing hot/chilled water + Delivers the correct mixture until the desired temperature is reached + Powerful electronic system based on a microprocessor + Water dosage from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated Gsdpfx Agjivdxmj Teuh + Digital display of water temperature and quantity + Temperature is adjusted with a thermostatic mixing valve (rotary knob) + Fast supply of spare parts within 1-2 working days STANDARD accessories included in the price: - 1x drain hose (2 meters long) with hanging hook Technical data: - Dosage quantity: 0.1 - 99.9 liters or 1 - 999 liters - Temperature range: 0°C to +40°C (depending on water supply) - Power: 25 W - Water pressure: 2 - 4 bar (recommended) - Connection values: 230 V - 1 phase - 50/60 Hz - Dimensions: 305 x 120 x 390 mm (W x D x H) - Net weight: 6.8 kg

Condition: new, Year of construction: 2025, Checkweigher to check if product meets target weight. 6 sorting stations with 2 way reject device, each. - Specifications: belt width: 220mm; weight range: 5-1000g; accuracy: +/- 0.3-3g; max. speed of the machine in neutral: 60 cycles/minute; power: 220V, 1-phase; machine dimensions (mm) approx.: L2459xW684xH780(weighing belt). Gjdpfx Asv Nm Rpog Tsuh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Fork carriage, rotator for wheel loaders, forklifts, telescopic handlers, forklifts, rotator, forklift rotator -Manufacturer: Stabau, forklift rotator 360° continuous rotation -Type: unfortunately without a type designation -Load capacity: approx. 2,500 kg -Mounting dimensions: see photos -Dimensions: 1050/205/H755 mm -Weight: 353 kg Gedpfx Aozkg U Heg Tjuh

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Gjdpfx Agjzkhbne Teuh Technical data: - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Gsdozg Er Aepfx Ag Tsuh Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone. Gusdpjzii Aksfx Ag Toh

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Guedpfx Agezinzlj Tsh Weight 45 kg Good condition

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Gjdpfx Ajzh Ht Rog Tsuh Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2000, length 800 mm width 1000 mm height 1300 mm total power requirement 0 kW Guedpfxsznndqs Ag Teh weight of the machine ca. 900 kg dimensions of the machine ca. 800 x 1000 x 1300 mm

Condition: new, workpiece weight (max.): 1,000 kg, – Capacity: 1000 kg – Minimum workpiece diameter: 50 mm – Maximum workpiece diameter: 800 mm – Roller diameter: 250 mm – Infinitely variable speed control – Foot pedal – Emergency stop Godov A Rrkepfx Ag Tjuh – Documentation – 230 V

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 1,075 mm, total length: 1,560 mm, total width: 820 mm, overall weight: 130 kg, input current: 32 A, power: 8.2 kW (11.15 HP), New device with proofing cabinet 12-month warranty Advantages: + Excellent baking quality at a top price-performance ratio + Robust, durable stainless steel construction + Manual thermostat Gsdpfx Aow Sk Arog Tjuh + Electrically operated raising and lowering of the basket via push buttons + Equipped with a drip table on the left side of the unit (optionally on the right), foldable + Fitted with a foldable steam lid + Easy cleaning and maintenance + Includes 1 turning basket, 6 rows, for easy turning of Berliners + Includes 1 proofing trolley with 10 tipping trays Optional accessories available at extra cost upon request: - Open dipping basket, e.g. for donuts, curd balls, apple fritters, etc. - 5-row turning basket, for larger dough pieces - Proofing trolley with 8 or 9 tipping trays (greater spacing between trays) Technical data: - Capacity: max. approx. 36 pieces (depending on product) - Dimensions: --- Footprint: 860 x 820 mm (WxD) --- Overall: 1560 x 820 x 1075 mm (WxDxH) - Power: 8.2 kW - Connection: 400 V - 3Ph - 50Hz - 32A CEE plug - Net weight: 130 kg

Year of construction: 2026, condition: used, NEW Automatic loading and unloading station.Suitable for wood, MDF, solid wood, drywall, cement fiberboard, and boards. Examples: Doors, boards, MDF panels, cabinet fronts, drywall, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel Technical specifications: - Working width 1.300 mm. - Includes belt conveyor, length 3,400 mm - Working height 930 ± 20 mm - PLC control, operated via a touch panel, Siemens S7-1200 - 2-circuit vacuum system - Loading and unloading of parts via vacuum suction cups - Special suction cups with position adjustment - 4 additional suction cups to lift the panels 15 mm on one side before vertical movement. - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 100 kg, continuous operation 85 kg - Max. component width: 1,300 mm - Max. component length: approx. 3,050 mm - Max. conveyor belt speed: infinitely variable up to max. 10 m/min. - Electric motor power: 1.5 kW Gusdpsy Iv N Rofx Ag Toh - Electronic components: Schneider Electronics and Siemens - Weight: 1,500 kg YouTube link:

Condition: like new (used), Year of construction: 2021, fuel type: gasoline, empty load weight: 68 kg, Several very neat joint filling machines for sale: Gusdpfjzc R Ucsx Ag Toh Weight: 68 kg Honda engine, petrol with water connection. 8 brushes. height adjustable. Price: € 1.250,- incl. VAT Several in stock!

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 02-2026, total width: 2,100 mm, total length: 2,100 mm, total height: 900 mm, overall weight: 800 kg, operating pressure: 60 bar, table height: 770 mm, Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism. Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting. Gjdezwhaqopfx Ag Tsuh Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg. Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically. The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom. The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side. The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing. In the folded position, the open angle is approximately 32° vertically.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Gsdpfszw T Duox Ag Teuh Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: used, Components of a sawing system Manufacturer: Linck Type: VZM & CSMA Godpjzuz I Nofx Ag Touh consisting of: CSMA extraction device Manufacturer: Linck Type: Av / CSMA Year of manufacture: 2018 The CSMA extraction device offers powerful and flexible material handling in automated production lines. It is designed for variable workpiece sizes and ensures continuous material transport. Technical data - Drive power: 4 x 4 kW - Feed rate: 85 m/min VZM centering device Manufacturer: Linck Type: VZM The VZM centering device is designed for precise centering tasks at high feed rates. The robust design allows it to be used under demanding industrial conditions. Technical data - Drive power: 2 x 7.5 kW - Feed rate: 84 m/min Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2004, condition: used, functionality: fully functional, For sale: Peripheral equipment for plastic injection molding. The grinders, mills, and temperature control units were in operation until 03/2026 and have been replaced by a new machine park. 3 units Wanner grinders, Compact series C17.26, year of manufacture 2006 2 units Kurtz grinders, SR 173, year of manufacture 2002 9 units Kurtz K-mills, SR 171, year of manufacture 2003 10 units Wieser mills, WG-SR 170/110, year of manufacture 2003 1 unit Colortronic M102L sprue grinder, year of manufacture 2006 20 units HB-Term temperature control units, HB-CW 90, year of manufacture 1999 Gjdpfx Agjz Hvgbj Tsuh 1 unit Wittmann temperature control unit, Tempro 1 TP 140, TS001537/001, year of manufacture 2000 1 unit Wittmann temperature control unit, Tempro basic 140, TS002073/001, year of manufacture 2000 3 units Wittmann temperature control unit, Tempro 2, year of manufacture 2000 Conveyor belts as shown in the picture Operating manuals available Complete purchase of all items preferred; individual purchase possible by agreement.