Used Mahros Runner D\C for sale (77,633)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: blue, #Chassis – haulage semi-trailer - Fine-grain steel welded construction, fifth wheel coupling plate with replaceable 2" kingpin - Slightly angled outer frame with "Load-Lock-Profil" for lashing strap attachment - 13 pairs of additional lashing rings recessed into the outer frame, 2.5 t each - 24 t two-speed landing legs, single-side operation, straight foot, without thrust compensation Bdjdowyiw Eepfx Ac Tjg - Pull-out ladder at the rear - Side door retainers - Wheel chocks with holder - Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm - Note: free support-leg corner dimension / rear swivel radius approx. 1930 mm - Galvanised steel rear underrun protection - Full-width rear mudflap - Half-shell mudguards with anti-spray flaps on the last axle only - Rear impact protection - "Blocker" – galvanised transverse steel angle, protecting against forklift damage and shielding the door hinges - 4 pairs of ferry lashing rings, marked yellow - Bolted pallet stop on both sides, approx. 15–20 mm high, reducing loading height by approx. 15–20 mm - Stainless steel storage box, W=600/H=400/D=500 mm, with polished lockable door #Rear wall / rear corner posts - Rear corner posts in steel up to roof edge, tarpaulin attachment with round tube and tensioning ratchet - Two-leaf rear portal doors, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Quick Lock System for side curtain with central locking, on the left (direction of travel) - Stainless steel tensioning locks on the right (direction of travel) - Customs cable running around the trailer with holder on the front wall (no customs seal, not combined with Quick Lock System) - Customer livery on side curtains and rear portal - Curtain with high-strength embedded spring steel strips, left side (direction of travel) – insertion battens on the left omitted as a result #Roof - Sliding roof, rear end-lift foldable, roof cover slides from rear to front, curtain colour: white - Eco lift roof, raised by approx. 380 mm on both sides, gas-strut assisted, optimum rain gutter at the rear, at the top of the rear bow above the doors #Paintwork - Frame: hot-dip galvanised incl. passivation - Landing legs: black coated - Front corner posts: galvanised and painted in front wall colour - Front wall: MB 5328 blue - Rear corner posts: galvanised and painted in rear wall colour - Rear wall: MB 5328 blue - Tarpaulin: RAL 5010 gentian blue - Pallet box lid: RAL 2011 deep orange - Note: the images are archive photos; the vehicle may still be in use.

Condition: used, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2021, Equipment: ABS, D-Tec FL-3-S Steel Tipper 57 m³ Exceptionally clean vehicle! * Load compartment length: 11,516 mm * Height: 3900 mm * Width: 2550 mm * Permissible total weight: 36,000 kg * Unladen weight: 7640 kg * SAF axles with disc brakes * 385/65 R22.5 tires * ABS * Aluminum rims * Aluminum support legs * Air suspension * Wheel chocks * 1st axle: lift axle * Open side impact protection * Grain chute * A-sign * Plastic toolbox * Platform * Rollover tarp, 680 gr/m² Bodpfszuhrbjx Ac Tedg * 5x tarp holders * Multi-chamber lights (standard) * 4x work lights * LED marker lights with flashing function * Acoustic reversing warning We are available for further information.

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Bjdpfx Aeym Aimsc Tedg Axle 1: left 10 mm right 10 mm Axle 2: left 8 mm right 8 mm Axle 3: left8 mm righ 8 mm We have the possibility to stack trailers!

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Bdjdpfx Acoycwtfs Tog

Condition: used, empty load weight: 4,689 kg, maximum load weight: 39,311 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 01/2027, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2018, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, ADR, anti-spray, disc brakes, air suspension with lift function, raising and lowering, lift axle on axle 1 and 3, 1x20 / 2x20 / 1x30 / 1x40 / 1x45, high-cube, 2x7 + 15-pin electrical connectors, center extension, rear extension, Genset Transcool Compact 16, 1,369 operating hours, 2x LED reversing lights. Bsdpfx Acezra Nte Tsdg

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. Bodpfx Acozt Ai Ej Tsdg The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, empty load weight: 4,689 kg, maximum load weight: 39,311 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 10/2018, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2018, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, ADR, anti-splash guard, disc brakes, air suspension with lift function, lifting and lowering, lift axle on the 1st and 3rd axles, 1x20 / 2x20 / 1x30 / 1x40 / 1x45 (tire sizes), central extension, rear extension, 2x 7-pin + 15-pin electrical connectors, high cube, tool box, 2x LED reversing lights. Bdedpfx Acezqymve Teg

Condition: used, empty load weight: 4,644 kg, maximum load weight: 38,356 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 11/2016, next inspection (TÜV): 05/2026, total length: 24,700 mm, total width: 14,200 mm, total height: 94,300 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2016, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, SAF axle manufacturer, ADR, disc brakes, air suspension with lift, lifting and lowering, lift axle on 1st axle, 1 x 20, 2 x 20, 1 x 30, 1 x 40, 1 x 45, central extension, rear extension, 2x 7-pin + 15-pin connectors, 2x reversing lights Bsdpfoyfiiqsx Ac Tedg

Condition: used, empty load weight: 4,551 kg, maximum load weight: 39,449 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 11/2019, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, suspension: air, tire size: 385/55 R 22.5, Year of construction: 2019, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, ADR, anti-splash guard, disc brakes, air suspension with lift function, lifting and lowering, lift axle on the 1st and 3rd axle, 1x20 / 2x20 / 1x30 / 1x40 / 1x45, high-cube, 2x7 + 15-pin electrical connections, central extension, rear extension, Genset Transcool Compact 16, aluminum wheels, 4,479 operating hours, 2x LED reversing lights. Bdsdpfx Acezqym Ae Tog

Condition: new, empty load weight: 4,830 kg, overall weight: 44,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, suspension: air, tire size: 385/55R22,5, Equipment: ABS, truck registration, | D-Tec VCC Container Chassis | Center and rear extension | 1st axle can be lifted | VALX axles with disc brakes | Tires: 385/55 R22.5 | New vehicles | Subject to errors, typing errors, and prior sale. Bdedpfx Acozrxbhj Teg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009703, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances according to DIN 1539! 3 heavy-duty pull-out shelves, each with a load capacity of 123 kg, full extension! -Internal dimensions w x d x h: 1000 x 1000 x 1500 mm -External dimensions w x d x h: 1765 x 1425 x 2615 mm -Volume: 1500 liters -Tmax 250°C -Controller: JUMO Imago 500 Bdodpfxezivlro Ac Tog -Approved solvent quantity at Tmax 250°C: 46 g -Exhaust air volume flow: 6 m³/min -Additional equipment: 3 pull-out grid shelves, heavy-duty, each with a maximum load capacity of 123 kg 1 pull-out chip tray at the bottom, included 1 feedthrough, e.g., for thermocouples -Connection power: 26 kW -Net weight: 1250 kg -Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection can be arranged at our warehouse. We carry new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, sintering oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009701, functionality: fully functional, immediately available, very good condition, 12 months warranty With safety system for solvent-containing substances according to DIN 1539 -Internal dimensions w x d x h 1000 x 1000 x 1500 mm -External dimensions w x d x h 1765 x 1425 x 2615 mm -Capacity 1500 liters -Tmax 250°C -Controller JUMO Imago 500 -Approved amount of solvent at Tmax 250 g: 46 g -Exhaust air flow rate: 6 m³/min -Optional equipment: 1 feed-through, e.g. for thermocouples Entry markings -Matching charging carts and trays available on request! -Connected load 26 kW -Net weight 1250 kg -Incl. documentation, CE declaration Bdjdpfszivl Ejx Ac Tjg We are happy to offer installation and commissioning services. Inspection in our warehouse is possible by appointment. We offer new and used industrial ovens. Please contact us! Oven, industrial oven, drying oven, firing oven, heating oven, heating cabinet, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, curing oven, convection drying cabinet, solvent oven, chamber dryer, paint drying oven.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, New machine warranty, in-stock item, original packaging, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading carts in stock (see photo). Contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Max temperature: 260°C Bdsdpfel Dw T Aex Ac Teg - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for data logging via USB stick - Air circulation: 3600 m³/h - Exhaust air flow: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Including documentation, CE declaration Installation and commissioning available upon request. Inspection at our warehouse possible by appointment. We offer new and used industrial ovens. Contact us! Keywords: Oven, Ovens, Drying oven, Firing kiln, Heat oven, Heating cabinet, Industrial oven, Convection oven, Convection chamber dryer, Tempering oven, Preheating oven, Temperature oven, Drying cabinet, Chamber kiln, Curing oven, Forced-air drying cabinet, Forced-air oven, Solvent oven, Chamber dryer, Paint dryer.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009702, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances in accordance with DIN 1539! 3 heavy-duty pull-out shelves included, each with a load capacity of 123 kg, full extension! - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Volume: 1500 liters - Tmax: 250°C - Controller: JUMO Imago 500 - Approved amount of solvent at Tmax: 250 g / 46 g - Exhaust air volume flow: 6 m³/min - Additional equipment: 3 pull-out grid shelves, each with a load capacity of 123 kg 1 pull-out chip tray at the bottom, included Pass-through for e.g. thermocouples - Connection power: 26 kW Bdsdozivl Sepfx Ac Tog - Weight: 1250 kg - Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection is possible in our warehouse by appointment. We offer new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: J10039A) Gantry-portal Loader (Double pick-up station) "MAHROS" Mod. Brush J10039B) 1st Double-side Sizing & Edge Bander "IDM" Mod. Activa SB 1/9900 Bjdshmkxqspfx Ac Tjdg J10039C) In-feeding Rollerway "MAHROS" Mod._____ with 90° Turning device (from lengthwise to crosswise) with double cone system J10039D) 2nd Double-side Sizing & Edge Bander "STEFANI". Mod. Performance SB2 J10039E) 90° Converyor Translator "MAHROS", complete with motorised roller conveyor and 90° motorised belts to translate the panels to the MAHROS Unloader J10039F) Brush-cleaning machine "WANDRES" Mod. BI46/1/1300 J10039G) Gantry-portal Stacker (Double station) "MAHROS" Mod. Brush

Condition: used, axle configuration: 3 axles, first registration: 08/2006, color: other, Year of construction: 2006, Empty weight: 5.600 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! Bdsdpfew Rn Hfsx Ac Tjg

Condition: used, axle configuration: 3 axles, first registration: 10/2017, color: other, Year of construction: 2017, Empty weight: 6.250 kg Axle 1: left 8 mm right 8 mm Bdjdpfx Acewzx Ips Teg Axle 2: left14 mm right 14 mm Axle 3: left 14 mm right 11 mm

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Bdsdpfjzn N T Tsx Ac Tog Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2015, suspension: air, tire size: 385/55R22.5, wheelbase: 8,810 mm, color: blue, Year of construction: 2015, Axle configuration Bdedpjzf Ic Ujfx Ac Tjg Tyre size: 385/55R22.5 Make axles: Valx Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.800 kg Carrying capacity: 37.200 kg GVW: 41.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: ON-64-VV Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS - Twist-locks = Remarks = 45 FT Only. Empty Weight: 3.800 KG!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902036561, empty load weight: 5,820 kg, maximum load weight: 29,180 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: red, Archive images shown. The vehicle may currently be in use. #Curtainsider Semi-Trailer Chassis Lightweight high-tensile steel welded construction, fifth wheel plate with replaceable 2" kingpin Bjdpjxbzkksfx Ac Tedg New slightly angled outer frame with "Load-Lock-Profil" for load strap attachment 3 pairs of additional recessed lashing rings in outer frame, 2.5 t each 14 pairs of additional recessed lashing rings in outer frame, 2.5 t each 24 t two-speed landing gear, single-side operation, straight legs with load compensation SAF landing gear Note: Clear landing leg corner dimension / rear swing clearance approx. 1,930 mm Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Painted RAL 3002 Carmine Red No paint warranty on overpainted coated components Galvanised steel rear underrun protection Painted RAL 9010 Pure White, incl. underrun protection brackets No paint warranty on overpainted coated components Quarter mudguards in front of and behind axle assembly EC-compliant anti-spray mudflaps Rear impact protection 1 aluminium ladder, approx. 2,550 mm, with side-mounted holder behind side underrun protection Bolted outer frame rail for direct curtain tensioners, protruding approx. 15–20 mm above loading platform, with perforated top profile for load straps 2 plastic toolboxes, W 800/H 450/D 450 mm 1 each on left and right, behind the 3rd axle #Axles + Suspension BPW disc brake axles with 430 mm brake discs Wheel hubs painted RAL 3002 Carmine Red "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Air suspension #Braking System Twin-line air brake system Colour-coded pipe routing for easy servicing Spring parking brake 2 non-interchangeable front coupling heads, without connecting lines 24 V WABCO EBS electronic braking system with front EBS socket, without connecting cable Warning: Trailer must only be towed by vehicles ensuring ABS functionality Raise/lower valve with auto-reset function Vehicle stability system Idem telematics incl. LIN battery, coupling sensor and tracking #Wheels and Tyres 385/65 R22.5 tyres, manufacturer's choice Polished Alcoa Dura-Bright aluminium wheels #Electrical System 24 V multi-chamber lights with yellow side LED lights Light carrier painted RAL 9010 Pure White No paint warranty on overpainted coated components 2 front white position lights 2 rear white/red outline marker lights 2 x 7-pin and 1 x 15-pin non-interchangeable front sockets LED work lights on both sides Positioned at the first cross-member behind the landing gear 2 additional rear LED work lights #Curtain Curtain with welded-in horizontal and vertical reinforcement straps Archive images shown. The vehicle may currently be in use.

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Bdsdezmamuepfx Ac Tjg Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fliegl Coil Curtainsider Semi-Trailer Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Bedpfx Ajzl D Iyjc Tjdg Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Tyres: 445/45 R19.5 (manufacturer's choice). Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Bodpfxozlciio Ac Tsdg Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate.

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Bjdpfxszlcdgj Ac Todg Rear night parking sign

Condition: refurbished (used), Year of construction: 2008, We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is the latest software platform which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2008 Configuration: - 6 station base - 4x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL Bedpjq Eg Hnefx Ac Tedg - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 14,000 cycles per hour