Used Lenze Electric Clutch Brake for sale (36,177)

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Additional equipment • Wire diameter: 0.1 – 0.3 mm Machine Benefits Technical Machine Benefits • Table dimensions: 840 x 640 mm • Max. Taper angle: 15/260 • Power supply: 3pe 50/60 hz ac200/220v (35 a) • Air source: 0. 5 mpa (75 l/min) • Pc technology with 15" lcd color screen, touch screen, and mouse Hedpfxjx D Iv Se Ad Rjn • Electronic manual control panel • Machining support with 2d/3d cam and graphics verification Extra Information Machine still under power

Condition: used, This listing is for the Schneider Electric APC Smart RT2000 UPS The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rack mountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load. Hodoxv D Hqepfx Ad Ron

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 The unit is in full working condition and is ready for immediate release Hodpfxjxv Dywo Ad Ren The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: used, The machine is designed to straightening and cut metal from a roll. Fully functional, straightening machine engine replaced a few years ago, Lenze. New software Lenze has been installed. The machine is programmable. Adjustable width, cutting length, sliding table. There is a remote control. There is an additional blade for the guillotine. Working width: 1500 mm Thickness: up to 2 mm Hodom E U Hiopfx Ad Ren If you have more questions, we will be happy to answer them.

Condition: like new (used), Year of construction: 2021, operating hours: 4,300 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, output current: 800 A, control voltage: 400 V, type of output current: three-phase, Main incomer switchboard 12-Way 800A TP Panel Board Used but still in new condition We brought from Schneider but it was not suitable for our usage. Hjdpfx Adormngas Rsn

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Almost identical linear unit under stock number 59702 Hsdpsgf Ix Aefx Ad Rjn

Condition: good (used), Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: KS Lenze, height gauge type C500-23 -Max. working height: 520 mm Hodpfx Ajyik H Aod Rsn -Number: 2x height gauges available -Price: per piece -Dimensions: 240/175/H575 mm -Weight: 7 kg/pc.

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D245...C -Contactor coil: LX9FG220 -Number: 2x contactors available Hedpfx Adjyha U Ne Rjn -Price: per piece -Dimensions: 200/170/H180 mm -Weight: 4.6 kg/pc.

Condition: good (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: Schneider Electric, circuit breakers, load break switches -Type: NSC400/630 K -Rotary drive: with extension -Dimensions: 255/140/H440 mm Hjdpfjyha I Nsx Ad Rsn -Weight: 5.8 kg

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. 0239398K Year of construction: 1993 Rated power: 6 kW Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife speedometer HÜBNER type TDP 0.2 LT-4 Hedoqv I S Sspfx Ad Ren Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Hedpfxjdzp U Aj Ad Ren Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box Hodpfx Ajuhmaced Ren

Condition: used, Linear guide, portal axis SCHNEIDER ELECTRIC / FESTO Electric slide Motor type: ILS1B571PC1A0 Year of manufacture: 2010 Axis travel: 300 mm Power supply: 36 Volt (DC) Carriage: 86 x 54 mm - Synchronous servo motor / stepper motor SCHNEIDER ELECTRIC, type: ILS1B571PC1A0 - Linear guide FESTO, type EGSK-33-300-6P Hjdjw Uc Tzepfx Ad Ron - Ball screw Ø 10 mm, pitch 6 mm - 2 adjustable position sensors Dimensions L x W x H: 580 x 120 x 57 mm Weight: 6.5 kg in good condition

Condition: good (used), PLC controller, electronic module, PLC control, analog input/output module, temperature input module Hedsyc Ruiepfx Ad Ren -Manufacturer: Schneider Electric, PLC controller Analog input/output module -Type: Modicon TM3TM3 -Quantity: 1x control unit available -Dimensions: 95/90/H30 mm -Weight: 0.1 kg

Condition: good (used), Input: 3 / PEAC 400/480V 12.0A, 10.0kVA, 50/60Hz Output: 3 / PEAC 0-480V 13.0A, 10.8kVA, 0-480Hz Hedpfoyrq Ibox Ad Ren ID no.: 13180666 Serial no.: 000010 Width: 135 mm Height: 350 mm Depth: 250 mm Weight: 6600 g Condition: Good, second-hand

Condition: used, Electric Motor WWE American Model !! Type WWE250-18-449T 460 60Hz 250 HP (PS) 1790 RPM 282A Hsdpfx Aec Sqvved Rsn IP55

Condition: refurbished (used), functionality: fully functional, power: 568 kW (772.26 HP), rotational speed (min.): 1,502 rpm, input voltage: 520 V, input current: 1,166 A, type of input current: DC, protection type (IP code): IP23, TT Electric DC motor Type: LAKC4355K Design: IM1001-B3 Standard: IEC60034-1 Duty class: S1 Hjdpfx Adexg Rgrs Rsn Input voltage: 520 V Input current: 1166 A Field voltage: 220 V Field current: 9.4 A Rated power Pn KW: 568 kW RPM: 1502

Condition: excellent (used), Year of construction: 2006, Double finisher 842 Multimatic with control unit year 09.2006, price € 20110 Wardrobe former and trouser topper rotatable on one column Finish drain in closed cabin integrated cabin exhaust automatically controlled doors close automatically flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory locations air volume regulation for particularly sensitive garments space-saving and virtually no stress in the work area due to finishing process externally steam-heated or fully electric with built-in electric steam generator Hedpogtiddsfx Ad Rjn Are you looking for an all-rounder for jackets & co? - Multimatic Double Finisher 842 With the Multimatic Double Finisher 842, jackets, coats, trousers and similar items can be finished automatically. It consists of a form finisher and a trouser topper. The two units are rotatably mounted on a column. For finishing, the previously loaded element (form finisher or topper) is swivelled into a cabin. The doors close automatically and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low-noise, small footprint. Year of construction: 09.2006 New price: 20.110 €. Unit runs perfectly Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Auxiliary switch, line switch, circuit breaker, load breaker, load disconnector, motor protection switch, circuit breaker, circuit breaker, auxiliary switch, main switch, on-off switch, cam switch Hedpfxsx R Sxge Ad Rsn -Manufacturer: Schneider Electric, circuit breaker switch disconnector -Type: NSX 400-630 F/N/H/NA -Rotary drive: with extension -Transport dimensions: 420/240/H200 mm -Weight: 7.7 kg

Condition: used, Data light barrier, retro-reflective light barrier, light barrier, optical data transmission -Manufacturer: Lenze, optical data transmission data light barrier -Type: DDLS 200/120.2-10 -Voltage: 18-30V DC -Dimension: 190/85/H110 mm -Weight: 1.2 kg Hjdpfxjq Untge Ad Rsn

Condition: used, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, Hsdpepk Iq Njfx Ad Rjn -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.

Condition: good (used), Servo motor, gear motor, electric motor, three-phase motor Hodpofi Tvdofx Ad Rsn -Manufacturer: Motor Lenze type MDFKARS080-22 -Manufacturer: Lenze gearbox type GST06-2A VCR 080C22 -Voltage: 390 V -Power: 3.9 kW -Speed: 197.4 rpm -Shaft: Ø 30 x 60 mm -Construction: B14 -Protection class: IP54 -with: Lenze fan type 4656EZ -Dimensions: 620/200/H210 mm -Weight: 35 kg

Condition: good (used), Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Application: Milling/Drilling -Motor spindle: was tested on a robot -Operating hours: 4350 hours -Motor spindle: 55 kW -Servo inverter: Lenze Servo Drives 9400 -Recording: HSK32 -hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions of control cabinet: 1118/800/H2430 mm -Weight: 694 kg Hsdpfx Adodntf He Ren

Condition: used, gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze HEW, adjustable geared motor -Adjustable gear: Lenze type 11 333 13 16 2 18-3.7 rpm -Gearbox: Lenze Type 12 603 16 1 1 -Engine HEW type: EEXF 80L/4 0.75 kW -Shaft: Ø 40 x 80 mm -Design: B3 -Protection class: IP 54 -Dimensions: 680/490/H320 mm Hsdpfx Adjuxg Nbo Rsn -Weight: 66 kg

Condition: used, Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Gearbox: Type GST05-2W VBR 1B i= 56.875 -Adjustable gear: GST05-2K VBR 071-12 10B 59 - 11 rpm Hsdpfxettil Ej Ad Ron -Spring-loaded brake: -Engine: Type MDERABR 071-12 0.25 kW / 1400 rpm -Shaft: Ø 25 x 45 mm -Design: B3 -Dimensions: 430/280/H225mm -Weight: 21.7 kg