Used Lauda Faulty Recirculation Thermostat for sale (875)

Condition: used, This listing is for The Liebherr Hausgerate LKexv 3910 Refrigerator The unit is in full working condition and is ready for immediate release The Liebherr LKexv 3910 MediLine is an efficient and Pharmacopoeia-compliant laboratory or pharmaceutical refrigerator designed for the safe storage of sensitive substances, chemicals, and research materials. With precise electronic controls and a temperature range adjustable between +3°C and +16°C, it ensures outstanding temperature stability. Key Features: Capacity: 360 litres Dimensions (H/W/D): 184 x 60.1 x 61.8 cm Temperature Range: +3°C to +16°C Explosion Protection: ATEX 95 certification, suitable for storing explosive and highly flammable materials as defined by EU Directive 2014/34/EU (ATEX) Digital Temperature Display: Continuously monitors the internal temperature and signals over- and under-temperature alarms if they persist over time Alarm System: The last three alarms are memorized by the system and can be recalled on demand Lsdpfx Amoxv D D Asnerl Efficient Cooling System: Forced air cooling ensures rapid cooling of freshly stored items and maintains an even temperature throughout the interior Power Failure Warning Light: Alerts in case of electricity loss Temperature Calibration: Ensures precise temperature control Safety Thermostat: Prevents freezing Construction: External body in white painted steel; internal compartment in PS (polystyrene) Electronic Controller: Digital display with 0.1°C accuracy Energy Consumption: Approximately 0.865 kWh/24h

Condition: used, This listing is for the Dasit Biopharma Faster SafeFAST Classic 209D Microbiological safety cabinet The unit is in full working condition and is ready for immediate use Overview & Compliance Suitable for EN 12469:2000 (EU) and NSF/ANSI 49 (US) standard compliance, the SafeFAST Classic 209 D provides triple protection (user, product, environment) via Class II vertical laminar airflow containment  Airflow: ~70% is recirculated through an H14 HEPA/ULPA filter, ~30% is exhausted via a second H14 HEPA filter  Key Features Construction: Exterior in epoxy‑powder‑coated steel; rear wall meets EN12469 cleanability criteria; segmented work tray of AISI 304L stainless steel, removable for cleaning/autoclaving  Lredpfx Ajxhftcjmnjl Electrical safety sash: Motorised vertical sliding front sash, with standard working aperture of 200 mm (max 490 mm), also hinged for deep cleaning  Airflow & Filtration System: Single or dual centrifugal fans; static negative pressure design ensures all contaminated air is drawn into HEPA filters; avoids positive pressure in any chamber  Control & Safety Systems Microprocessor-based control (ECS™ or similar): Real-time monitoring via rear-lit LCD and touch keyboard, displaying airflow status, filter condition, fan status, and sash position; allows safe operation and data logging  Audio‑visual alarms: Alert the user in case of deviations in airflow velocity, sash mis-position, clogged filter, fan issues, or power loss 

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Lrsdjxhfpkopfx Amnjl Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet with Stand The unit is in full working condition and is ready for immediate use The BioMat 2 is a Class II microbiological safety cabinet also known as a biosafety cabinet designed to protect the user, the sample (or product), and the environment during handling of potentially hazardous or sterile biological materials Key Features & Capabilities Lrjdpsxhfkbjfx Amnjl Protection & Compliance Meets the European standard EN 12469:2000 for microbiological safety cabinets It shields both the operator and the product through an inward air curtain (front sash) and sterile downflow over the work surface. Aerosols and contaminants are filtered through HEPA filters before being exhausted or recirculated Construction & Safety Built with a 1.5 mm mild steel outer shell and 304 stainless steel interior. Side panels are made from 5 mm UV-resistant toughened glass Include safety alarms, airflow monitoring, and robust sealing under negative pressure to prevent leaks

Condition: used, This listing is for the Clifton NE4-8P Water Bath The unit is in full working condition and is ready for immediate release Lrodpfx Ajy Iw Aljmnel The Clifton NE4-8P Digital Water Bath With Circulator is an 8-litre laboratory water bath with an integrated pump that recirculates temperature-controlled water for uniform heat distribution. It’s designed for accurate temperature control with a PID digital controller, LED display, and temperature alarm Common lab uses include incubating samples, warming reagents, and stabilising solutions at set temperatures

Condition: used, Year of construction: 2012, Overview This craft brewery system was manufactured in 2012 by Slowbeer and other manufacturers. The system is designed for beer production and includes brewhouse, fermentation vessels, milling equipment, and temperature control units. The machines are described as in very good condition with low operating usage. Technical data Capacity: 250 L brewhouse Application: Beer production Configuration: Brewhouse, multiple fermenters, malt mill, heating and cooling unit Scope of Delivery  Brewhouse | Slowbeer | MB 250E | 2012 | 250 L brewhouse system Fermenter | 2012 | 500 L stainless steel fermenter with CIP system Fermenter | 2012 | 2 × 1,200 L isobaric conical fermenters Fermenter | 2012 | 1,200 L isobaric flat-bottom fermenter Malt mill | Sommer | Piccolo 11S | 2012 | Capacity 100–150 kg/h with support frame and hopper Heating and cooling unit | Winus | Model M | 2012 | Control unit with 4 digital thermostats for up to 10,000 L Pump | 2012 | Transfer and cleaning pump with inverter Lsdpfey Sic Ssx Amnjrl

Condition: used, mileage: 174,000 km, power: 125 kW (169.95 HP), first registration: 04/2020, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat via WhatsApp now: Quick & easy contact with our sales advisor. Attention!!! Sale preferably to business customers. Internal ID number: [3180] ----Optional extras available: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & Emissions Test * Nationwide delivery * Financing available with or without down payment * Tow bar retrofitting available upon request * Spring offer: Upon request, and for a surcharge of only €999, increase the towing capacity up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle highlights: * 19% VAT deductible * Regularly serviced * German vehicle * 2nd owner * Ready for immediate use * Euro 6 standard * High-roof, long wheelbase panel van * Storage shelving in load compartment * Cruise control * Air conditioning * Bluetooth multimedia function * Reversing camera * Navigation system Special equipment: Driver’s airbag, all-weather/year-round tires, Audio system 24/25: navigation system including SYNC 3 with AppLink and 8" multifunction display, Express Line package, vehicle without vinyl floor in load/passenger area, cold-start package, LED cargo area lighting, metal cargo area partition, fog lights with static cornering function, seat package 9 / 15 (driver’s seat, 4-way adjustable) - double passenger bench with seat heating, fabric, 6.5x16 steel wheels, auxiliary heating package 1. Additional features: Overhead storage in cab, trailer stabilization program (TSA), electric and heated exterior mirrors, integrated turn signal in exterior mirrors, vinyl flooring (load/passenger area), on-board computer, entrance lighting, Electronic Brakeforce Distribution (EBD), electronic traction control, driver assistance system: hill-start assist, emergency brake assist, crosswind assist, rear wing doors (180-degree opening), heater with recirculation, high-roof standard panel van body, medium-height roof variant, steering column (steering wheel) height & reach adjustable, engine: 2.0 l - 125 kW TDCi CAT, My Key (second vehicle key programmable), front & rear parking sensors, 3750 mm wheelbase, tire repair kit, low emission according to Euro 6d-TEMP standard, leather gear shift/selector lever, adjustable interval wipers, right-hand side sliding door (load/passenger area), rear mudflaps, side protection strips, start/stop function, Trend, integrated rear step, fully trimmed cargo/passenger area, 10 lashing rings, rollover stability control (RSC), lightly tinted heat-insulating glass, additional electric heater, second foldable remote key. ----Looking for leasing or financing? We offer attractive options – even with no down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business hours: Mon–Fri: 9:00–18:00 Ljdpfxjymv E Ie Amnorl Sat: 9:00–14:00 ----Note: All information online is non-binding and intended for general vehicle description only. We reserve the right for errors, typing mistakes, and prior sale. The binding condition of the vehicle is based solely on the purchase contract concluded on site or through written confirmation. Vehicles with a mileage exceeding 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 189,900 km, power: 96 kW (130.52 HP), first registration: 11/2018, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales consultant. Attention !!! Sales preferably to commercial customers? Internal ID number: [3241] ----Optionally available: * 12–64 months warranty (valid across the EU) * New inspection * New MOT & Emissions Test * Nationwide delivery * Financing available even without down payment * Spring offer: On request and for an extra fee of just €999, towing capacity upgrade up to 3,500 kg (vehicle- and manufacturer-dependent). ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Ready for immediate use * Euro 6 compliance * High roof & Long wheelbase * Tow bar * Air conditioning * Cruise control * Reversing camera * Cruise control (duplicate – can omit in ad) * Bluetooth multimedia system * Lined cargo area Special Equipment: Express-Line Package, LED cargo area lighting, Smoker Package, Reversing camera with color display, Visibility Package 1, Seat Package 9 / 15: Driver’s seat (4-way adjustable) – Double passenger seat incl. seat heating, fabric upholstery, 12V socket in load/passenger compartment Further Equipment: 3rd brake light, Overhead storage in driver’s cab, Driver’s airbag, Traction control system (ASR), Audio system: Radio/CD player with multifunction display, Electrically adjustable and heated exterior mirrors, Integrated indicator in mirrors, On-board computer, Roof lining in passenger compartment, Tachometer, Electronic brake force distribution (EBD), Electronic differential lock (EDS), Driver assistance system: Hill start assist, 165 A alternator, B-pillar grab handle, Rear wing doors without glazing (opening angle 180 degrees), Heater with recirculation function, Interior filter: Pollen filter, Body type: High-roof panel van standard, Body variant: Mid-height roof, Silver radiator grille, High cargo area partition behind driver and passenger, Height and reach-adjustable steering column, Headlight range adjustment, Truck registration, 2.0L – 96 kW TDCi CAT engine, Front and rear parking sensors, Production site: Otosan, 3300 mm wheelbase, Full wheel covers, Spare wheel with travelling tyres, Low emissions per Euro 6 standard, Right-side sliding loading / passenger door, Wide side protection mouldings, 1st row seating in load/passenger compartment: 3-seat bench, Partially painted bumpers, Trend, Integrated rear step, Tinted glass, Second foldable remote key. ----Interested in leasing or financing? We offer attractive options – even without down payment! Please feel free to contact us. Contact: Phone: E-Mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business Hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 Ledjyw Er Tjpfx Amnorl ----Note: All information provided online is non-binding and serves solely as a general description of the vehicle. Errors, omissions, and prior sale excepted. The binding condition of the vehicle arises exclusively from the purchase contract signed on site or from written confirmations. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers.

Condition: used, mileage: 66,000 km, power: 96 kW (130.52 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat via WhatsApp now: Quick and easy contact with our sales consultant. Attention! Priority sale to business customers only. Internal ID Number: [3182] ----Optional available: * 12–64 months warranty (valid EU-wide) * New service inspection * New MOT & emissions test * Nationwide delivery * Financing possible even without down payment * Tow bar retrofitting available on request Lsdsyt Ai Hopfx Amnerl * Spring offer: Increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent) for a surcharge of only €999. ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Single owner * Ready for immediate use * Euro 6 emissions standard * High-roof, long-wheelbase panel van * Cruise control * Air conditioning * Tow bar * Bluetooth multimedia functionality * Rearview camera Special features: Passenger side airbag, driver's side airbag, glazed rear wing doors (180-degree opening angle), heated rear window, rear window wiper, auto-dimming interior mirror, LED load compartment lighting, plastic bulkhead with window, fog lamps with static cornering light, smoker package, 6.5x16 steel wheels Additional equipment: Overhead storage in cab, Trailer Stability Assist (TSA), audio system: radio with USB and Bluetooth handsfree, electrically adjustable and heated exterior mirrors, integrated turn signals in mirrors, vinyl flooring in load/passenger compartment, onboard computer, entry lighting, electronic brake-force distribution (EBD), electronic traction control, driver assistance: hill-start assist, emergency brake assist, crosswind assist, recirculating air heater, high-roof van standard body, mid-height roof variant, height and reach adjustable steering column, engine: 2.0L – 96 kW TDCi CAT, My Key (programmable 2nd vehicle key), front and rear park pilot system, wheelbase 3,750 mm, tire repair kit, low emissions according to Euro 6d-TEMP, leather gearshift lever, variable interval wipers, right side loading/passenger door, rear mud flaps, side protective strips, Seating Package 13: driver's seat (4-way adjustable) – twin passenger seat, fabric, Start/Stop system, Trend line, integrated rear step, high load/passenger area trim, vinyl compartment lining, 10 tie-down points, Roll Stability Control (RSC), slightly tinted heat-insulating glass, additional electric heater, second folding remote key, auto-dimming interior mirror. ----Leasing or financing required? We offer attractive deals—even with zero down payment! Contact us for details. Contact: Phone: Email: Address: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information provided online is non-binding and for general vehicle description purposes only. Errors, misprints, and prior sale excepted. The binding condition of the vehicle is exclusively determined by the purchase contract on site or via written confirmation. Vehicles with a mileage of more than 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, Year of construction: 2014, Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Spadoni | 1.5hl with Tangential Entries Mixing Tanks | 1.5hl with Tangential Entries 2x Isobaric Fermenters | Spadoni | 2.5 bar 15hl 2x Isobaric Fermenters | Spadoni | 2.5 bar 30hl 2x Atmospheric Fermenters 1bar Pressure 1.2hl | BREW TECH Atmospheric Fermenters 1bar Pressure 1.2hl, (Jacketed) | BREW TECH Lodpotka Aqofx Amnerl

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle Lsdpfoydh Agsx Amnorl transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Year of construction: 1994, condition: used, machine/vehicle number: RX 1020 FF 4C - 146.2048.4, We are offering this used PULSARR (Best / TOMRA) RX 1020 FF4C optical sorting machine, including a vibratory infeed conveyor, manufactured in 1994. Manufacturer: PULSARR (BEST / TOMRA) Year of manufacture: 1994 Machine number: 94014 Serial number: 146.2048.4 Type: RX 1020 FF4C Working width: 1200 mm Up to now, the machine has been used to sort potato cubes of 10 x 10 x 10 mm. Capacity: 3.5 - 5 t/h. Foreign objects and black spots were sorted out. Lodpfjy Tzf Iox Amnerl In July 2007, the machine received a Pollux computer upgrade! (equivalent to the current Genius model) Then, in 2015, the Pollux software was upgraded again. This means that the frame and conveyor belt remained, but the complete camera optics and the majority of the control system were replaced with the latest technology, which corresponds to the successor model, the Genius. The machine has been cleaned, visually refurbished, and faulty electronic components have been professionally replaced. The machine has been stored for approximately 3 years. Our offer refers to a used machine including a vibratory infeed conveyor, without any warranty, and without installation or commissioning. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Lrodpfxsy Ty E Hj Amnol Year 2011 0 Range+Heine coating system for coating individual wooden window components and frames for sale on behalf of a client ----- Manufacturer’s technical description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Intended use of material from the relevant coating manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift (without forced drying) Process (1 cycle is run twice): - Flooding - Drying - Checking and applying joint sealant - Spraying - Drying ----- ----- Item 1 Conveyor technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially comprising: 3 drives with gear motors for the main chains with frequency-controlled speed (see layout). Various running rails, horizontal curves, chains Tensioning stations, pneumatically/electrically controlled stop stations 50 crossbeams, 5,000 mm long (max. weight 250 kg) Automatic tilting of the crossbeams in the drip-off area after the flooding system 1 conveyor system control (Siemens S7-300 PLC) Programmable buffer stocks Infinitely variable drives. 1 lifting/lowering station for loading and unloading workpieces (max. stroke 2,000 mm) 1 set of steel structure for mounting the conveyor system ----- Item 2: Flood Coating System 1 flowcomat II-P 1 system for colourless primer Maximum workpiece width approx.: 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flood lances, each fitted with a maximum of 3 nozzles. 1 set of accessories for cleaning the system 1 stainless steel sieve fitted externally 1 paint supply 1 control unit ----- Item 3 Additions to the dip coating system 1 Drip channel and drip tray in the evaporation area behind the dip coating system After dip coating, the crossbars run into a drip buffer. The dripping coating material is returned to the dip coating system via the non-stick PP drip tray (and drip channel). Rinse water is collected in the flood coating system and pumped out. The use of PP for the areas in contact with the coating ensures easy cleaning of dried-on coatings. 1 Humidification system 1 Control unit for the humidification unit Complete with controller for the humidification volume 1 Hygrostat for measuring room humidity and activating the humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation system 1 R+H waco 200 coagulation system – 200 l collection tank ----- Item 4: Topcoat spray booths 2 paint booths for topcoating 2 extraction walls with sandwich panel cladding to suit the work area. Fan: 16,000 m³/h Filter area: - 3 sets of Ecola pre-separators - 1 set of Paintstop filters - 1 set of bag filters Recirculating air distribution ceiling in a tensioned frame design Volume 12,000 m³/h approx. 75% recirculation – 25% exhaust air operation (the exhaust air volume is extracted from the hall) installed on site-provided foundations in accordance with the layout 2 Prolac overspray recovery columns ----- ----- Item 5 Addition to the topcoat spray booths 3 humidification nozzles fo...

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Lredpjy H Dlqofx Amnjl Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: refurbished (used), Guarantee in months: 12 Item No.: Mitsubishi MDS-C1-V2-3520 Servo Drive This is a service exchange item, a deposit is also required of 3000 EUR, which will be refunded upon receipt of your faulty unit. Lrsdpfxsi Da S Ss Amnjl *All service exchange items are subject to inspection, prior to any refund. If the service exchange item is beyond repair, the service exchange cost will not be refunded. However, a full report can be made available.*

Condition: ready for operation (used), Rexroth spindle / ball screw with R150357086 recirculating ball nut SN: 174 + spindle block from Emag VSC200 DUO machine, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and shipping separately! Lredsx Eq Ntjpfx Amnel

Condition: ready for operation (used), Emag - Rexroth spindle / ballscrew assembly with R150357086 recirculating ball nut SN: 217 + spindle block and bellows from an Emag VSC200 DUO machine, used, in good condition, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Ljdpfsx Eq Ngex Amnerl

Condition: ready for operation (used), Emag - Rexroth spindle / ball screw with R150357086 recirculating ball nut SN: 216 + spindle block and bellows from Emag VSC200 DUO machine, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Lrsdpfjx Eq Naox Amnsl

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Lrodpeulnb Dsfx Amnel Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox Lodpfx Ajfqpxiomnerl - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Ljdpfxsvw A T Ns Amnorl Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder Ledpfxoycv Sao Amnsrl - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Lodpfxjyliq Ij Amnjrl Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Optional HEPA filtration: for removing particulates as well as gases (available on some models). Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace. Touch-button controls with a service-due indicator. Quiet operation (~

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm Lredpfxjy Sgmus Amnol • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Condition: used, mileage: 470 km, power: 96 kW (130.52 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,204 mm, total width: 2,198 mm, total height: 2,316 mm, loading space length: 3,950 mm, loading space width: 2,150 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: - Reversing camera - Passenger airbag - Tow bar - Exterior mirrors with long support arm - Reinforced alternator - Tire repair kit - Technology Package 24 Additional Features: - Overhead storage compartment in cab - Driver airbag - Electrically adjustable and heated exterior mirrors, long support arm - On-board computer - Electronic Brakeforce Distribution (EBD) - Electronic traction control - Driver assistance system: hill start assist - Driver assistance system: crosswind assist - Vehicle without anti-lock braking system (ABS) - Speed limiter system 120 km/h - Lockable glove compartment - Heater with recirculation function - Interior lights in cab: front reading lamp - Body/build: standard flatbed - Radiator grille with chrome trim - Radiator grille black/grey - Steering column (steering wheel) height/depth adjustable Lodoyixi Iopfx Amnorl - Engine: 2.0 L - 125 kW TDCi CAT - MyKey (2 programmable vehicle keys) - Wheelbase: 3954 mm - Low-emission according to Euro 6d-TEMP - Seat Package 13: Driver's seat (4-way adjustable) - double passenger seat, fabric - Seat Package 18A: Driver's seat (4-way adjustable) - double passenger seat (2-way adjustable), fabric - Steel rims 6.5x16 - Start/stop system - Technology Package 11 - Trend - Heat-insulating, lightly tinted windows