Used Kosme/Krones Triblock Rinser-Filler-Capper 20/20/3/3 for sale (79,225)

Condition: new, maximum load weight: 37,495 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis A 100.121 Double T-longitudinal members welded to cross members, front construction height: approx. 147 mm (incl. fifth wheel plate) A 100.260 Chassis version 'Compact rear' A 100.026 Interchangeable 2 kingpins, 1 position: front overhang: approx. 570 mm A 100.164 Fixed rear impact protection, externally, in steel design A 100.390 Container supports as rectangular tubes, approx. 200 x 120 x 8 mm thick, reinforcements on the approach angle A 100.004 Rear underrun protection device according to EC Directive A 100.072 Lateral protection device according to EC Directive A 100.378 Lateral protection device approx. 460 mm high A 420.001 Quick-Lock complete equipment - Locks at every possible position - Locks are theft-proof A 038.001 Container locks for accommodating the following containers: 1 x 20' container, flush with the rear A 046.000 Length from kingpin to rear edge of vehicle: approx. 6,620 mm Support device B 028.001 Two mechanical support winches, 2 x 12 t, semi-circular with base plate, manufacturer: Jost B 001.000 Operation of the support winches on one side, on the right side Axles/Aggregate C 000.004 3 axles, each with a load-carrying capacity of 9,000 kg Blsdpsz Dmnqofx Aa Isn C 100.020 Wheelbase: approx. 1,410 / 1,310 mm C 075.600 KRONE axles with air suspension and disc brake, ET 120 C 143.028 Aggregate distance = approx. 4,625 mm C 075.950 Brake disc with approx. 430 mm diameter C 142.010 Load-dependent, fully automatic, electronic lift axle control for the 1st axle C 148.010 Manual function on the control panel for forced lifting (= driving assistance acc. to Directive 97/27/EC) and forced lowering via a rotary button C 148.030 Preparation of the lift/trailing axle(s) for operation from the towing vehicle (without installation in the towing vehicle), according to the selected connector(s) for light, for control via: *Contact 6 of the 7-pole auxiliary connector - ISO 3731 and/or *Contact 12 of the 15-pole connector - ISO 12098 and/or *Contact 8 A of the VBG connector C 043.110 With lifting and lowering device, incl. automatic ride height adjustment Tires (rims) D 400.000 6-fold, 385/65 R 22.5 - manufacturer according to manufacturer's choice D 185.100 Without spare wheel D 130.076 Profile: M+S (Mud + Snow) D 500.130 KRONE Smart Tyre Monitoring acc. to ECE R141 Determination of tire pressure and temperature D 500.121 KRONE TPMS control unit D 500.128 Without connect function in the TPMS control unit Mudguards F 002.010 Plastic wheel cover F 010.001 Splash guard according to EC Directive Brake G 000.103 Braking system according to ECE Regulation 13 (incl. vehicle stabilization function) G 082.000 Spring brake parking brake G 102.010 Diagnosis via ISO7638 connector (EBS supply cable) G 079.002 Brake line connections below the top edge of the beam G 066.101 prepared for KRONE Telematics Dry G 040.000 2 chocks with holder G 071.000 Standard air connections ISO 1728 (Palm) G 064.000 Aluminum air tank G 088.550 Braking system: Wabco Premium G 088.500 Caution: The trailer may only be towed by tractor units which ensure the effectiveness of the ABS! G 085.100 EBS system, 2S/2M, 2 sensors on one axle Light H 000.001 Lighting and light signaling device acc. to UN ECE Reg. No. 48 H 070.005 2 outline lights with rubber arm, LED version H 071.011 LED side marker

Condition: used, Rotary labelling machine for labelling bottles using two cold glue stations. Manufacturer: KRONES Model: PRONTOMATIC Year of manufacture: 1991 Capacity: 10,000 bph Bledpfxsywckgj Aa Ion Carousel: 12 stations Configuration: 2 x heads for cold glue labels Original electrical documentation. Technical condition: used machine, condition as shown in the photos.

Condition: used, Year of construction: 1990, Bottle filler for approx. 8000 bottles/h Additional title: Filling and capping machine Capacity approx.: 8000 bottles/h Formats: 0.5 l Euro bottle, 0.33 l longneck bottle, 0.5 l goiter neck bottle Blsdpfsw S T H Tjx Aa Ien Position: free standing Features: 1 pre-evacuation, short tube filling, crown cork capper

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01800, Year of construction: 2020, operating hours: 1,829 h, load capacity: 2,000 kg, lifting height: 5,070 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Chassis number: H2X386X01800 Load center: 500 Mast type: Triplex Condition: Like new Technical condition: very good Description: Linde E20PH-02 electric forklift. Manufacturer: Linde. Model: E20PH-02. Year of manufacture: 2020. Operating hours: 1,829 h. Load capacity: 2,000 kg. Drive: Electric 48 V. Equipment: Triplex mast, overall height 2,300 mm, fork positioner, side shift, work lights, solid tires. The Linde E20PH-02 is in very good condition and impresses with its compact design and excellent Linde driving performance. Thanks to the triplex mast, fork positioner and side shift, the machine is ideal for demanding storage and logistics tasks. The low overall height of only 2,300 mm allows it to be used even in halls with limited headroom. The charger can be ordered separately upon request. Inspection and test drive possible by appointment. Linde E20PH-02 Electric Forklift Manufacturer: Linde Model: E20PH-02 Year of manufacture: 2020 Operating hours: 1,829 h Capacity: 2,000 kg Drive: 48 V Electric Equipment: Triplex mast Blsdszcrv Uspfx Aa Ion Overall height 2,300 mm Fork positioner Side shift Working lights Solid tires This Linde E20PH-02 is in very good condition and offers the well-known Linde driving comfort and productivity. Equipped with a triplex mast, fork positioner and side shift, the truck is perfectly suited for warehouse and logistics applications. The low overall height of only 2,300 mm allows operation in buildings with restricted access heights. A charger can be supplied on request. Viewing and test drive possible by appointment. Side shift, fork positioner, 4th valve, partial cabin

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Number of capping heads: 15 pcs. Blodjzi Alxopfx Aa Ijn Formats: 0,5 l NRW bottles; crown caps Material: housing and contact surfaces from stainless steel Base construction: caroussel-type filling and capping block Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen

Condition: excellent (used), Year of construction: 2004, Description to follow! Bsdpfxoz Ebqcj Aa Isln

Condition: used, power: 37 kW (50.31 HP), gearing type: other, fuel type: diesel, color: yellow, overall weight: 4,700 kg, empty load weight: 4,260 kg, maximum load weight: 440 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2000, brakes: other, Year of construction: 2000, operating hours: 6,320 h, driver cabin: day cab, wheelbase: 1,950 mm, Equipment: additional headlights, all wheel drive, cabin, pallet forks, * German machine * 6,320 operating hours * All-wheel drive * Condition: see photos * Articulated Komatsu WA 63 - 3 * Turning radius 3,640 mm * Articulation angle 40° * Hydraulic 4-point quick coupler * Loading bucket 0.7 m³ - bucket width 1,850 mm * Bucket pivot height 3,115 mm * Planetary axles with automatic differential locks on both axles * EasyDrive (Hydrostatic drive) (SN) * 1st speed range 0 - 5.6 km/h - 2nd speed range 0 - 20 km/h * Hydrostatic steering * Working pressure 200 bar hydraulic * Power-assisted hydraulic controls * Towing hitch * ROPS and FOPS comfort cab * Double-door safety cab according to DIN/ISO * Easy operation via multi-function lever * Comfort driver's seat * Delta lift arm * Sliding window on the right * Heater * Heated rear window * All-around glazing * Optimal noise insulation * Engine: Komatsu Type Komatsu 4D 94E - 37 kW - 2,775 cm³ * Easy maintenance * Wide-opening engine hood * Side maintenance flap * Wheelbase 1,950 mm * Track width 1,450 mm * Weight 4,700 kg Bsdpfxozcbumj Aa Ioln If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Manufacturer - Vigo Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Bjdpsr I Ddkefx Aa Isln Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Year of construction: 2007, condition: ready for operation (used), Output: 39,600/h, additional accessories are available. Bljdomdry Hepfx Aa Ijn

Condition: used, Year of construction: 2019, Overview  The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data  - Filling points: 2 - Filling valve diameter:  mm - Suitable for filling highly viscous media - Fields of application: food, beverage, pharmaceutical and chemical industry Bedpfx Aexb Uniea Ioln

Condition: used, Year of construction: 2024, Overview:  The ALWID KRONE-D is a semi automatic dosing filler. The machine is suitable for volumetric filling of not carbonated liquids (low viscosity up to high viscosity) for the pharmaceutical, chemical and food industry. Procedure: The ALWID KRONE-D is a semi automatic machine. The operator places the bottles on the height-adjustable worktable manually and presses the START switch at each filling valve. That way, also single bottles can be filled. As soon as the START switch has been activated, the filling valve moves down and opens. The bottle is filled. Then the filling valve closes and automatically moves up, when the adjusted volume has been reached. Now the filled bottle can be machine can be used for several different liquids, bottle shapes and bottle sizes without requiring additional format parts. As the construction is solid and clear, the format change only needs a short time. The filling volume is easily and quickly adjustable by changeable volume-adjustment rods. Immersed filling is possible, when foaming products are to be filled. The machine is movable. Technical data: number of filling stations: 2, expandable to 4 Blodpfxexb Umrs Aa Ien diameter of filling valve:  filling volume: 100-1000 ml  machine made of: stainless steel product touching parts stainless steel, glass and plastic pneumatic connection:: R 1/2“ / 6 bar electric connection: not needed  

Condition: used, Year of construction: 2013, operating hours: 869 h, Specifications: Travel speed 2.2-4.2 km/h, hydraulically adjustable undercarriage 1300-1500 mm, dozer blade 1500, digging depth 2320 mm, 3-cylinder water-cooled diesel engine, type D1105-E2-BH-12, 1123 cm³, 19 hp, track width 250 mm. Mechanical quick coupler, 2 auxiliary hydraulic connections, grapple 450 mm with teeth. Bedpfx Aaeidar Te Ieln For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see legal notice) form the basis for all purchase agreements, invoices, proforma invoices, orders, and sales negotiations.

Condition: used, Year of construction: 2001, Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Additional title: weight-based filling Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity Power: 11 kW Voltage: 400 V Frequency: 50 Hz Heating / Cooling: steam 3 bar; 10 kg/h Compressed air: 6-8 bar; Qmax = 300 l/min Blsdpfxoyvtrls Aa Isn Length: 3708 mm Width: 968 mm Height: 2442 mm Formats: 1.3-litre bucket (H = 132 mm, Dmax = 132 mm); 6.1-litre bucket (H = 195 mm, Dmax = 226 mm); 10-litre buckets are also possible Running direction: left -> right Base construction: linear filler Features: Filling head; Capping head; Bucket magazine; Lid magazine; Heating cartridge; Load cell; Protective housing with doors, control cabinet with control buttons and 12-inch touchscreen; Product connection/CIP inlet DN50; Steam connection 1"; Compressed air connection 3/8"; CIP return DN40

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2017, total length: 9,730 mm, total width: 2,550 mm, total height: 1,350 mm, suspension: air, wheelbase: 7,790 mm, Year of construction: 2017, Axle configuration Make axles: BPW Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.600 kg Carrying capacity: 35.400 kg GVW: 39.000 kg Maintenance, history and condition APK (MOT): tested until 11/2026 Technical condition: good Visual appearance: good Identification Registration number: OP-61-ZL Blsdpfozxh Dxex Aa Ien Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Twist-locks = Remarks = LAG O-3-CC / Tank Chassis 20-30FT / BPW + Disc

Condition: used, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: > Solid German engineering for jointing and rabbeting, including concave and convex profiling > Adjustable rabbet depth for PLANER WIDTH up to 510 mm and max. chip removal up to 8 mm > Ergonomic working position directly at the cutterblock > Panhans four-knife cutterblock with strip-type planing knives and adjustment tools > Finely planed cast iron table, total table length 2850 mm > Control panel at eye level with digital display of chip removal, current outfeed table position (neutral, concave and convex profiling), including template holder and practical tool storage > Electrically adjustable infeed table via push buttons > Concave and convex profiling adjustment on the outfeed table > Toothed table lips for noise reduction > Adjustable fence in depth and angle via a single lever, adjustable up to 45° and mounted in an extremely smooth steel guide > Anodized fence ruler > Swivel auxiliary fence type 1545 > Console for feed mechanism > Bridge guard TXF type 1570 with folding cover > Automatic star-delta starter, motor circuit breaker > Planed in our workshop Bsdpfx Aajzz Tzno Isln Planer width: 510 mm Infeed table length: 1620 mm Outfeed table length: 1170 mm Total table length: 2850 mm Motor power: 5.5 kW / 7.5 HP Cutterblock speed: 5000 rpm Dust extraction port: 160 mm Voltage: 400 V / 50 Hz Footprint: 2850 x 1420 mm Color: Light gray RAL 7034 and violet-blue RAL 5000 Weight: approx. 1050 kg Includes: Full steel Tersa cutterblock > Automatic motor brake Location: Flörsheim Availability: Short notice

Condition: good (used), functionality: fully functional, 1 x Fette FS 20 1 x Fette FS 30 With a 25 mm shank, suitable for turret presses, e.g., Traub TB/TK or Index B. The holders can be inspected at our warehouse. Bsdpfx Aaez H H Hfo Ijln

Condition: ready for operation (used), * Brand: Nordberg Bergeaud * Type: CVB 20/50 * Surface: length 5000 mm, width 2000 mm - 3 decks * Driving: 22 kW E-motor * Incl.: springs and springsupport Bljdpfoywmrbex Aa Ijn * On Stock: 2 pieces

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: Bjdjz Eh Uuepfx Aa Isln >> Year of manufacture 2008, machine no. 347141 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel ranges X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. The conversion from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site under power. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347142 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication Bodpfx Asz Eh T Dsa Ieln >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Changing from vertical to horizontal operation is very easy by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site with power connected. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC control in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347140 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Rapid traverse Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples Bledpfez Eh Uzex Aa Isn >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control. Furthermore, the machine has a hydraulic chuck in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347138 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axes 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake Bledpfxsz Eh Ubo Aa Ien >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Switching from vertical to horizontal operation is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: ready for operation (used), * Brand: Kleemann * Surface: length 6500 mm, width 2000 mm - 3 decks Bedpfx Aeywm Tfsa Isln * Driving: 22 kW e-motor * Incl.: springs.

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Empty weight: 3.216 kg Carrying capacity: 40.784 kg Bodpfxoxu Ddge Aa Ioln GVW: 44.000 kg Technical condition: very good Visual appearance: very good = Additional options and accessories = - ADR - Air suspension - Disc brakes - EBS - Lift axle

Condition: used, Year of construction: 2003, Planer Bsdpfxozy Urlo Aa Ieln Rollers no. 17 Diameter 42 Belt width 2,000 mm. Minimum thickness 0.5 mm. Maximum thickness 3 mm.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347139 >> Fixed angular table Bljdpez Eh Tqsfx Aa Isn >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.