Used Kellenberger Flange for sale (1,679)

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Ibsdez A Sz Hepfx Afujc Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: used, mileage: 24,424 km, power: 220 kW (299.12 HP), axle configuration: 4x4, color: orange, driver cabin: day cab, gearing type: semi-automatic, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, For enquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Mercedes-Benz Unimog U530 4x4 skip loader Removable body, superstructure: jotha CombiCon 7018 UL, lifting/ payload: 7,000 kg, front axle differential lock, Euro 6 axle bridge variant, combination cylinder 12/16, axle installation variant Euro 6, reinforced steering components on axle side, synthetic oil (HA), axle ratio i = 6.377, trailer brake, dual-circuit, Haldex disc air brake, wheelbase 3,900 mm, VarioPilot (left/right changeable steering), side protection device, central mounting brackets, rear mounting brackets, front mounting plate DIN76060, type B, size 3, air conditioning, air-suspended driver's seat with seat heating, air-suspended passenger seat, additional left-hand steering column switch, universal mount for control unit, main battery switch at battery box, ABS trailer socket 24V, 7-pin/5-pin, reversing alarm, 32-pin equipment socket, 12V constant power outlets (C3), 12V and 24V center console, 24V/25A on-board socket in cab with C3 signal, rear view camera, generator 28V/150A, monitor for camera system, external sun visor (transparent), immobiliser with transponder, driver’s cab strength per ECE-R-29/03, EasyDrive (hydrostatic drive) (SN), Automatic Shift (EAS), clutch flange Ø150mm (instead of 120mm), gearbox oil filter, increased continuous power hydrostatic drive, hydraulic transmission oil cooler, oil/air, 6-stage tipping cylinder, loose, hydraulic rear connector 4-way, cell 1+2, rear pressure line, second hydraulic circuit, separate rear return line, hydraulics for tipping mechanism, single-acting trailer tipping connection, rear, LS hydraulics, 4-cell, separate continuous use, snow plough relief, implement carrier series, compression level (6) 2, compression level (7-8) 12, chassis LL, digital tachograph 2nd generation, ADR, tachograph manufacturer VDO, pre-installation for warning light for telescopic cylinder, radio with USB port and Bluetooth, pre-installation for toll detection, pre-installation for trunked radio (12V), pre-installation for Truck Data Center 6 (FB Card), 25L AdBlue tank, entry lights, LED flashers yellow left/right with tripods, additional LED high beam on roof bar, cab rear work light (LED, top), additional adjustable LED headlights A-pillar, engine OM936, R6, 7.7 L, 220 kW (299 hp), 1200 Nm, engine version Euro VI E, High Performance Engine Brake, quick radiator cleaning system Clean-Fix, engine PTO incl. front PTO, PTO speed limitation, EATU SCS ON-HIGHWAY EURO VIE, rear cross member for lowered trailer hitch, CTT trailer hitch, 14.00x22.5 drop center rims, red/white retroreflective warning stripes, warning triangle and warning light, weight variant 16.5 t (7.5/9.0), adjustable AHK support bracket, Scharmüller trailer hitch, Rockinger hitch, 48mm pin, Unimog implement carrier, model generation 1, instruments/labels/manuals in German, additional hydraulic control, auxiliary roof lights front and rear, tyre tread: 1st axle 16-18mm, 2nd axle 18mm. Upon request, we will be happy to provide a leasing or finance offer. Mr. Seidel (Tel. ...) will gladly assist you. Further information can be found on our homepage: ... Errors, changes, and prior sale reserved!!! ESP Cab type: Local transport Isdpfoyuadqsx Afusbc ...

Condition: excellent (used), Eccentric chuck with key (28133) in a sturdy wooden transport box Manufacturer: Klopfer Type: EZ 32 Diameter: 160 mm Overall diameter: 265 mm Height: 180 mm KK mounting size: 5 Cone diameter: 82.575 mm Bolt circle diameter: 104.8 mm Ijdpfx Afogzlmwouebc Eccentric adjustment range: 0 - 32 mm The mounting flange can be replaced if necessary.

Condition: new, WM210V - ROGI VARIO METAL LATHE 230V - Single Phase Turning diameter over bed ----- 210 mm Turning diameter over cross slide ----- 110 mm Center height ----- 105 mm Distance between centers ----- 400 mm Bed width ----- 100 mm Cross slide travel ----- 75 mm Tool post travel ----- 55 mm Spindle bore ----- 21 mm Spindle nose ----- MK3 Spindle speed range ----- variable, 50 - 2500 RPM Whitworth threading ----- 10 - 44 TPI (8) Metric threading ----- 0.5 - 3 mm (10) Tailstock travel ----- 60 mm Tailstock diameter ----- 30 mm Tailstock spindle nose ----- MK2 Motor power ----- brushless, 600 Watt Ibedpfx Afjga Txceuoc Weight ----- 75 kg STANDARD ACCESSORIES * 3-jaw chuck, 100 mm - self-centering * 4-way tool holder * Splash guard * Back guard * Chuck guard * Lead screw guard * Tool post guard * Set of change gears * Digital speed display * Fixed centers * Left/Right switch * Tools in a box OPTIONS * 4-jaw chuck, 100 mm - independent * Flange for 4-jaw chuck, 100 mm * Fixed steady rest WM210V * Traveling steady rest WM210V * Faceplate WM210V * Base cabinet WM210V

Condition: good (used), Hydraulic cylindrical grinding machine Center height 100 mm Center width 500 mm Grinding wheel diameter min./max. 200 - 300 mm 3 grinding wheel revolutions 2,250 - 2,420 - 2,680 rpm Workpiece spindle head: 8 workpiece speeds, adjustable 30 - 750 rpm. Spindle taper or inner taper of the workpiece spindle MK 4 Ibjdpfxjr E Azio Afuec Tailstock: Inner taper of quill MK 3 Quill travel 30 mm Table: Maximum table inclination +/- 6° Table speed, adjustable 0.1 - 6.0 m / min. Motor power 3 kW Dimensions L x W x H 1650 x 1350 x 1400 mm Weight 1900 kg Accessories / Special features: - Manual or automatic operation - Automatic infeed - Grinding wheel flange with grinding wheel - Wet grinding device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Ibedpetqf Rzjfx Afujc Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: new, We offer all types of spare parts for your conventional or CNC Karstens/GP cylindrical grinding machine, including components for your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed control systems—new and used—as well as reversing blocks for the Z axis on an exchange basis. Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Iedpfjraibvox Afuebc

Condition: like new (used), Year of construction: 2012, operating hours: 344 h, functionality: fully functional, grinding length: 850 mm, grinding width: 400 mm, total height: 505 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Base machine Type Linea Iron 6.3 Preparation for magnetic chuck with safety function Magnetic chuck 600 x 300 x 70 mm Paper band filter unit with manual paper unwind Air cooling for hydraulic oil Ibjdpfx Afeygap Rjuoc Dressing fixture at the end of the table, incl. space for lateral diamond 2x grinding wheel flanges with manual weights Machine grinding range: Longitudinal 850 mm. Cross 400 mm including max. B (50 mm) grinding wheel. Height distance table to spindle center 505 mm. Weight 3,500 kg.

Condition: new, Year of construction: 2023, machine/vehicle number: U-231811/2, 1x VDL HT350 rotary valve without drive (with drive available at extra cost). These are new and have never been used; manuals and flange gasket are included as new. The valves are supplied without drive. Size: DN350 Housing: Painted cast iron Rotor: Stainless steel with rubber blades Bearings: External slide bearings Iodpfevpg Axex Afusbc At 100% fill, 10 liters per revolution.

Condition: good (used), Year of construction: 2022, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Iedpfx Aezphtnsfuebc

Condition: good (used), FORKARDT Three-jaw manual chuck with wedge bar system Type: F315 No.: 1403959 with flange for KELLENBERGER cylindrical grinding machines Equipment: 1 set basic jaws 1 set hardened jaws 1 piece flange D: 300 mm ISO 50, M24 1 set operating wrench 1 piece operating manual Iedpfx Afjzi Aqzjuobc Condition: good, fully functional

Condition: used, mileage: 426,787 km, power: 353 kW (479.95 HP), first registration: 01/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: blue, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort* Cab with medium-height raised roof 'XLX' (2440 mm wide, 2280 mm long) * Comfort seat for driver (air-suspended, lumbar support, shoulder adjustment, seat heating) * Comfort Package 1 for Driver * Seat covers in comfort quality * Storage compartment accessible from inside and outside * Air conditioning with automatic temperature control (CFC-free) * Auxiliary heater EBERSPÄCHER D4S * Cab insulation NORDIC (cold protection) * Cab tilting mechanism, hydraulic/electric * Sleeper berth with storage space and mattress with zone-divided firmness * Cooler box * Stowage table * Electric windows, central locking with remote control * Interior lighting red/white, ambient lighting, reading lights * Sun blinds * Sun visor ----Multimedia* Instrument panel km/h 'High-Line' * MAN Tronic (on-board computer) * MAN Media Truck Advanced radio with navigation system * Navigation SD card, Western Europe * Hands-free function (Bluetooth), AUX-in/USB * CB radio antenna & * CB radio Stabo XM3044 * MAN sound system ----Lights & Visibility* Headlight range adjustment * Halogen double headlights H7 * Work lights on cab roof * Rotating beacons (yellow) * Electrically adjustable and heated curb, rear and wide-angle mirrors * EU front mirror on the passenger side * Mirror arms for superstructure * Tinted windows ----Safety & Assistance Systems* Electronic braking system (MAN BrakeMatic) * Anti-lock braking system (ABS), traction control (ASR) * Electronic stability program (ESP) * Differential lock in the rear axle * Disc brake front, drum brake rear Ibodpfx Aszq Nvtsfuec * Speed limiter (89 km/h), cruise control ----Technology & Drive* Engine D2676LF25, 480 hp / 353 kW, EURO6 SCR, 2300 Nm * Gearbox ZF 16 S 252 OD * ZF Intarder * Rocker arm brake * Leaf/air suspension * Differential lock in the rear axle * PTO NH/4C without flange f=1.17/1.40 right-hand side ----Superstructure* Saddle coupling JOST JSK 38 C 3.5'' * Height 190 mm with integrated lubrication * Work platform with step and grab handle * Wheel chocks ----* Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 400 liters * AdBlue tank: 80 liters * Technical gross weight: 33000 kg * Unladen weight: 10053 kg * Permissible trailer load: 49500 kg * Overall length: 7192 mm * Wheelbase: 3300 + 1400 mm * Next inspection due: 05.2026 ----Vehicle number/Vehicle: 12332----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection, complete export handling, brokerage of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: used, Year of construction: 2008, operating hours: 23,600 h, functionality: fully functional, machine/vehicle number: 632025, TSCHUDIN T35 – CNC High-Precision Cylindrical Grinding Machine with Siemens Sinumerik 840D Year of manufacture: 2008 · Machine No.: 632025 · Approx. 23,600 spindle hours · Incl. SECKLER production cell, STREULI filtration system, DITTEL unbalance measuring device TECHNICAL DATA • Manufacturer: HTT KELLENBERGER (now Hardinge / L. Kellenberger & Co. AG) • Model: Tschudin T35 / Siemens • Machine No.: 632025 (original nameplate) • Circuit diagram: E-632025 • Year: 2008 • Control: Siemens Sinumerik 840D with grinding software • Travel paths: Z 600 mm / X 350 mm • Supply voltage: 3 × 400 VAC, 50 Hz • Control voltage: 24 VDC • Connected load: 16 kVA • Weight: approx. 6,400 kg • Spindle operating time (machine ON): approx. 23,600 h • Centre distance (machine class): up to 400 mm • Centre height: 175 mm • Max. workpiece weight: 150 kg • Grinding wheel diameter: 400 – 600 mm • Guideways: Hydrostatic • Max. cutting speed: up to 120 m/s (ball bearing variant) INTEGRATED AUTOMATION & AUXILIARY SYSTEMS • SECKLER robot magazine – autonomous production cell (robot loading, workpiece magazine, sorting conveyors for good / SPC / scrap parts) • DITTEL M5000 unbalance measuring device • STREULI filtration system MZ 150 (year 2005, fine filtration) CONDITION & HIGHLIGHTS Used machine, fully functional • Siemens Sinumerik 840D with grinding software • Hydrostatic guideways – precision class • Autonomous SECKLER production cell • Integrated DITTEL M5000 unbalance measuring device • STREULI MZ 150 coolant filtration system • Regular maintenance documented by Johnson Controls (last in 2024, next due 04/2025) • Removed from ongoing serial production at a precision parts manufacturer Iedsy Eqiqepfx Afuobc ABOUT THE MACHINE The Tschudin T35 is a modular production external cylindrical grinding machine for medium and large series. Originally developed by Swiss company HTT Hauser Tripet Tschudin AG, now under the Kellenberger/Hardinge Group. The offered machine was operated in conjunction with a complete SECKLER production cell – fully automated 24/7 operation is possible. The Siemens Sinumerik 840D control system features grinding software developed by grinding specialists and allows optimal programming of grinding and dressing processes. The hydrostatic guideways guarantee highest precision in series production; the ball bearing variant allows cutting speeds up to 120 m/s. SCOPE OF DELIVERY • Tschudin T35 base machine with Siemens Sinumerik 840D • Complete SECKLER automation cell (incl. control cabinet) • DITTEL M5000 unbalance measuring device • STREULI MZ 150 coolant filtration system (year 2005) • Existing grinding wheel flanges LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Inspection prior to purchase strongly recommended. All information without guarantee. Auction content is solely the described item. Used machine – sale excludes any warranty. Errors and typographical mistakes excepted.

Condition: used, mileage: 519,563 km, power: 353 kW (479.95 HP), first registration: 08/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Engine D2676LF07, 480 HP, EURO 5 SCR, 2300 Nm * ZF 16 S 252 OD manual transmission * 400 l fuel tank right side + 35 l AdBlue * Front axle VOG?09 / VP?09 driven Iodpfx Afez Rh Utouebc * Parabolic springs front, 9.5 t * Water cooler & charge air cooler for high temperatures * Trapezoidal rear springs 16 t * Double rear axle installation ----Instruments & Cab* "Base-Line" instrument panel? * Adjustable steering wheel * MAN BrakeMatic * Brake shoe width RA 220 mm * Rear axles AP HPD?1382/1352 * Axle ratio i = 4.33 * Rear differential lock * Front differential lock with warning buzzer * Limited steering capability with FA?lock ----Wheels & Tyres* 11.75-22.5 rims on both front axles * 9.00-22.5 rims on both rear axles * Spare wheel 9.00-22.5 ----Cab & Comfort* Cab M (2240 mm wide, 1880 mm long) * Comfort seat covers * Driver comfort seat, air-suspended, ventilated, heated, with lumbar support * Passenger seat static * Internal-release front flap * Two additional vehicle keys * Washable interior door panels ----Engine & Auxiliary Components* Visco fan * Electronic engine management * PTO parameterization * PTO without flange * Tank guard * Fuel filter + filter heater ----Drive & Transmission* Engageable front-wheel drive * Transfer case G172 * Hydraulic/electric cab tilt device ----Heating & Air Conditioning* Eberspächer D4S auxiliary heater * Automatic air conditioning ----Air, Exhaust, Intake* Raised air intake * Fine dust and pollen filter * 1-cylinder air compressor * Raised exhaust right * Tailpipe manifold for raised exhaust ----Brakes & Safety* Engine brake EVBec * Flame start system * Single-plate clutch MFZ 430 * Raised axle vents * Foldable rear underrun guard * No front underrun guard * No side protection device * Three-part steel bumper * RINGFEDER 5050 A trailer coupling * Crossbeam for trailer coupling * Body mounting brackets * Spare wheel holder * Immobilizer * Emergency steering pump * Multifunction steering wheel * ABS * Drum brakes front and rear * 2-line brake coupling * Pneumatic parking brake front ----Access & Lighting* Step to body on fender * Entry lighting * Driver seat armrests * Fly screen * High construction * Air-suspended cab mounts * Note: Reduced comfort due to trapezoidal springs * Lockable tank and AdBlue caps * Headlight range adjustment * Work light left * Additional high beam and fog lights * H7 halogen twin headlights * Position and marker lights * Reading lights * Preparation for cargo area lighting * Central locking * Protective cover for tail light * Electric dual-tone horn ----Electrics & Controls* MAN Tronic on-board computer * Display languages German & English * TollCollect pre-installation * ABS trailer socket * 24V 7+7-pin trailer socket * 12V/24V sockets in cab * 2× 175 Ah batteries * Battery box * Alternator 28V 80A * Operating data display * Reversing alarm switchable * Electronic speed limiter 89 km/h * Cruise control * Boost pressure gauge * Car phone antenna * CB radio antenna * Radio MAN BasicLine * Radio pre-installation * 2 halogen roof beacons * Rotating beacons yellow ----Chassis & Stability* Stabilizer on both rear axles * Front axle stabilizer * Air dryer * Frost protection down to -27 °C ----Interior* Tinted windows * Rear wall of cab without window * Seat belt indicator * Manual sunroof * Electric windows * Sun blind * So

Condition: new, functionality: fully functional, power: 0.75 kW (1.02 HP), rotational speed (max.): 1,380 rpm, input voltage: 230 V, input frequency: 50 Hz, input current: 5 A, overall weight: 12 kg, type of cooling: air, protection type (IP code): IP55, New Kramp electric motor, single-phase 230 V, 0.75 kW, 4-pole, 1380 rpm. New in original Kramp box, never used. 20 units in stock. Data according to the nameplate: Kramp part number: EM80B4MPP1B0 Kramp type: ML 802-4 Nameplate: Uniparts Kavee, IEC-DIN type MY8024/B5 Power: 0.75 kW Voltage: 230 V, 50 Hz, single-phase Speed: 1380 rpm Current: 5.3 A cos φ: 0.92 Protection class: IP55 Iedpfx Asz I Swlefujbc Insulation class: F Aluminum housing, blue (RAL 5000) Flange design for Kramp MPP hydraulic power units Suitable as a replacement motor for Kramp MPP hydraulic power units, for example for tipping trailers, wood splitters, and lift platforms. Operates on a standard 230 V power outlet. Pick up or shipping available upon agreement. Price is per unit, excluding VAT.

Year of construction: 2020, condition: used, Manufacturer: KAPP Model: KF3-1500-1 Year: 2020 Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Iodjz Iubtspfx Afuobc Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) A bundle of around thirty tubes, flanged tube sheet Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2000. This Gildemeister CTX 500 S2 features a maximum turning diameter of 455 mm and a turning length of 1097 mm. It includes a robust tool system with a disc turret and a maximum chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 500 S2 machine we have for sale. Contact us for further details. - Max. Swing Over Bed / Slide: 680 mm / 670 mm- Max. Turning Diameter over Face Slide: 455 mm- Max. Turning Length: 1097 mm / 2097 mm- Spindle Head Flange: 220 mm (Size 220h5)- Spindle Bore: 107 mm- Spindle Bearing Front Diameter: 140 mm- Max. Chuck Diameter: 315 mm / 400 mm- Tailstock Quill Taper: MK 5 / MK 6- Tailstock Quill Diameter: 120 mm- Tailstock Quill Stroke: 120 mm- Tool System: Disc Turret- Number of Slide Carriage Sets: 1- Number of Face Slides: 1- Longitudinal Stroke: 1097 mm / 2097 mm- Face Stroke: 320 mm- Max. Torque: 650 Nm / 2000 Nm- Feed Force (Longitudinal / Plan): 1 N / 8000 N- Rapid Feed (Longitudinal / Plan): 30 m/min / 24 m/min- Feed Speed Range: mm/min- Main Drive Motor Type: B3- Feed Drive X-Plan Motor: Siemens 1FK6063-6AF71-1AH0 (1.9 kW, 3000 rpm, IP64)- Feed Drive Z-Longitudinal Motor: Siemens 1FK6101-8AF71-1AG0 (4.9 kW, 3000 rpm, IP64)- Lubrication Motor: Vögele 113.50.000701C (0.13 kW, 2200 rpm, IP44)- Hydraulic Motor: 2.2 kW, 1450 rpm, IP54- Connected Load / Power Requirement: 58 kVA- Voltage: 400 V- Frequency: 50 Hz- Current: 85 A- Fuse Rating: 100 A- Control Voltage: 230 V AC / 24 V DC- Floor Space Required: 8.41 m x 4.3 m x 2.41 m (5607/6657 x 3285 x 2405 mm)- Machine Weight: 8700 kg / 10000 kg- Additional Equipment: Chip conveyor with chip container, coolant system, exhaust filter unit (IFM) Technical Specification Counter Spindle No Isdpfx Afez Iqnpsuobc Driven Tools Yes

Condition: used, Year of construction: 2005, functionality: unexamined, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used slant-bed lathe, manufactured in 2005 by Trens in Slovakia (Type SBL 500 CNC). It features a 12-position turret with 6 powered stations and a Siemens Sinumerik 810D control system. An identical TSL 500 from 2006 is available at the same location in the Düsseldorf area. Anyone looking for two identical machines for a manufacturing cell can acquire both together. TECHNICAL DATA - Year of manufacture: 2005 - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-position, with 6 powered stations - Main drive: 22 kW, max. 4,200 rpm EQUIPMENT AND ACCESSORIES - Tsubaki chip conveyor with cable carrier (SRF 040) - Tool holders, stocked - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, flanges, and housing components up to 400 mm in diameter, including drilling and milling operations. Ibsdpfxoz H Ufvs Afusc LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact details for local transport companies. Price on request. Please feel free to contact us via the contact form.

Condition: used, mileage: 439,552 km, power: 324 kW (440.52 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro4, loading space volume: 9 m³, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 850 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Cab & Comfort* Cab: Type 'M', 2240 mm wide, 1880 mm long * Seat covers: Standard quality * Driver's seat: Comfort seat, air-sprung, with armrests * Passenger seat: Static, longitudinally and backrest adjustable * Air conditioning: AC R134A, CFC-free, automatic temperature control * Electric windows for driver and passenger * Central locking * Instrument panel: km/h 'Base-Line', language German and English * Electric hands-free system (mobile phone), MFL compatible, mounted on A-pillar * Voice control for mobile phone, language: 1 'German' & English * Radio: MAN BasicLine 24V * Hands-free system and radio system * Sun visor Iedpez Siwmjfx Afusbc ----Safety & Electronics* Electronic braking system: MAN BrakeMatic * ABS (Anti-lock Braking System) * Disc brake front, drum brake rear * Speed limiter: electronic, set to 85 km/h * Cruise control ----Lights & Visibility* Headlight range adjustment * Auxiliary headlights (high beam and fog lights) * Halogen twin headlights H7 * Headlight protection grille * Sun visor ----Engine & Transmission* Engine: D2066LF36, 440 hp / 324 kW, EURO4, 2100 Nm * Transmission: ZF 16 S 252 OD * MAN PriTarder * PTO NH/1C without flange f=0.91/1.09, located on the right side * MEILLER axial pump 265/1 * Differential lock, rear axle * Leaf/leaf spring suspension ----Body* Tipper body: 4800 x 2300 mm, manufacturer MEILLER * Body floor: VS100 - 5 mm * Side boards: JET design, 3 mm, side boards 850 mm, rear board 850 mm * Front wall: 1000 mm * Access ladder on the front wall ----* Trailer coupling RINGFEDER 2050 A for central axle trailer * Hydraulic connection at the rear for 3-way tipper trailer ----* Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 300 liters * Technically permissible total weight: 26000 kg * Tare weight: * Permissible trailer load: 24000 kg * Overall length: * Wheelbase: 3200 + 1400 mm * Next inspection due: ----Vehicle number: 12566----Errors and prior sale are subject to change----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arrangement of financing, application for export registration plates, vehicle transport, vehicle registration, recovery and vehicle transport----YOUR VTS TEAM

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. Ijdsy Ehrxjpfx Afusbc SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 1996, Picot rolling machine Type RCS 205 – 30 cn Capacity: 6 mm rolling and 4 mm edging CNC controlled Year: 1996 Rollers in very good condition Minimum coil diameter: 266.5 mm (6 mm rolling and 4 mm edging) Maximum coil diameter: 2050 mm (10 mm rolling and 6 mm edging) Iedpfxjz Rvlyo Afuobc

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Chassis height: 85 mm Underride length: 620 mm Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Net weight of loading lift: 75 kg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock Ibedpepcqdwofx Afuoc 2 units available, price per unit

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225P (lift2move) Serial No. 19500S, Year of manufacture 2008 Model No. Rated load capacity 225 kg Lifting stroke 1680 mm Lifting height 2200 mm Lifting speed (unladen / laden) approx. 100 / 75 mm/s Outreach of lifting device 861 mm Chassis length 1020 mm Ground clearance 90 mm Underneath length 600 mm Chassis design (front / rear) Ø 80 / 140 mm (2 fixed / 2 swivel castors) Overall length 1400 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 units of 12 Volt, 17 Ah lead-acid batteries installed in the battery pack - External charger 24 VDC, 3 Amps (mains voltage 230 V, 50 Hz) - Can be moved manually, swivel castors with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard Special version: lifting device from GIESLER for radial fan SC-1000 CP XT (Tiger) - Load capacity of the lifting device 25 kg - Lifting device can be swivelled 90° via manual hydraulic pump - Opening width between the support jaws 300 / 330 mm - Opening width between the clamping rollers 200 - 300 mm - Clamping is done via handwheel - Weight of the lifting device 60 kg Ibedpfxoflt Edo Afuoc Total weight 140 kg very good condition

Year of construction: 2006, condition: ready for operation (used), This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine. • Base frame • Accessories for base frame • Hydraulic fittings • Unit carrier (left) TK420 • 108 bores • Pipe (coolant return) • Flange shaft with face gearing Ijdpex D If Tefx Afuobc • Stöber servo motor with planetary gearbox • Limit switch monitoring • Protective hood • Form turning unit - material guide • Guide axis • Cover plates with empty stations • Milling unit with NC feed • Clamping with toothed belt pulley z1=16 • Toothed belt pulley Z1=16 • Toothed belt pulley Z2=20 • Toothed belt 25 AT10 / 730 • Hydraulic power unit 70 100 04358 32 dm³/min • Central lubrication • Deflection plate T - T Additional equipment • Part ejection console • Straightening and feed rollers • Clamping change parts station 1 • Tools and tool holders • Operating tools S6 • Ejector with gripper • Clamping jaws (plates) • Press-in unit for internal hexagon socket • Face turning head PCD 100-01-101 • Length control with pneumatic cylinder and laser • Reel support (Star cross) • Extension (coil height) • 2-jaw chuck • Pneumatic accessories (for 4 cylinders) • 24-volt filling unit integrated with emergency stop valve • DA 300 compressed air maintenance system

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual trolley, and electric chain hoist For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical Data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI Crane System as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,890 mm Support distance L: 5,570 mm Support distance B: 5,890 mm Length of runway girder: 6,150 mm Length of cross girder: 6,260 mm Overall dimensions of the system: approx. 6,590 x 6,590 mm Bottom flange of crane bridge: 4,085 mm Bottom flange of portal girder: 4,507 mm Overall height: 4,905 mm Ceiling height according to drawing: 5,185 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Rated current: 7.7 / 5.4 A FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Number of load strands: 2 Weight at 5 m lift: 65 kg Trolley / traveling carriage Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Girder width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF 2000 A Load hook Floor control Main switch Conductor line / power supply Steel support and girder structure Documentation / inspection book available EC Declaration of Conformity available Assembly and operating instructions available Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Longest component: approx. 6.3 m Heaviest single component: approx. 300 kg Total weight of the system is estimated to be roughly between 2,000 and 3,500 kg, depending on the installed steel profiles and base plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and girder structure Control / operating elements Main switch Documentation / inspection book EC Declaration of Conformity Assembly and operating instructions Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. Iedpfxjzgvx Tj Afuebc We will gladly answer further questions by telephone.