Used Keb Keb Drive + Filter for sale (26,613)

Condition: reconditioned (used), operating hours: 425 h, functionality: fully functional, overall weight: 410 kg, fuel type: gasoline, HAKO JONAS 980 V SWEEPERS NEW AIR FILTER Iiodpfx Aeztvrtsatjf The machine has only 425 hours of operation. A new wire roller brush combined with new side brushes provide excellent sweeping results. New 12V 52Ah starter battery. Built-in warning light. A high-performance dust extraction turbine and new dust guards around the main brush prevent fine dust and debris from being raised after sweeping. The machine has a large debris flap for collecting larger debris. The machine has undergone a thorough overhaul. Operating fluids and parts such as bearings, drive belts, and dust guards have been replaced. Each machine we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: Jonas 980 V Engine: Gasoline Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7200 Sweeping speed (km/h): 6 Tank capacity (l): 60 (2x30) Filter area (m²): 3 Dimensions (L x W x H) 1500 mm x 1000 mm x 1330 mm Machine weight, ready to use (kg) ~ 410 INCLUDED: NEW AIR FILTER NEW cylindrical brush - PPL bristles + ACC (Wire) NEW side brushes - PPL bristles + ACC (Wire) NEW starter battery 12V 52Ah NEW roller guards Built-in warning light Dust bins (2 x 30L) KEY FEATURES: The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The Jonas 980 V sweeper is the perfect machine for efficient, economical sweeping HAKO JONAS 980 V SWEEPERS NEW AIR FILTER The machine has only 425 hours of operation. A new wire roller brush combined with new side brushes provide excellent sweeping results. New 12V 52Ah starter battery. Built-in warning light. A high-performance dust extraction turbine and new dust guards around the main brush prevent fine dust and debris from being raised after sweeping. The machine has a large debris flap for collecting larger debris. The machine has undergone a thorough overhaul. Operating fluids and parts such as bearings, drive belts, and dust guards have been replaced. Each machine we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: Jonas 980 V Engine: Gasoline Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7200 Sweeping speed (km/h): 6 Tank capacity (l): 60 (2x30) Filter area (m²): 3 Dimensions (L x W x H) 1500 mm x 1000 mm x 1330 mm Machine weight, ready to use (kg) ~ 410 INCLUDED: NEW AIR FILTER NEW cylindrical brush - PPL bristles + ACC (Wire) NEW side brushes - PPL bristles + ACC (Wire) NEW starter battery 12V 52Ah NEW roller guards Built-in warning light Dust bins (2 x 30L) KEY FEATURES: The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The Jonas 980 V sweeper is the perfect machine for efficient, economical sweeping of multi-story parking lots, warehouses, production buildings, and outdoor areas. Petrol power ensures high flexibility. The large working width (1200mm) ensures high surface coverage. A clearly legible and intuitive control panel.of multi-story parking lots, warehouses, production buildings, and outdoor areas. Petrol power ensures high flexibility. The large working width (1200mm) ensures high surface coverage. A clearly legible and intuitive control panel.

Condition: used, Line filter for Siemens SINAMICS drive systems. Designed for use with Smart Line modules to reduce grid feedback and electromagnetic interference. Manufacturer: Siemens Type: Line filter Model: 6SL3000-0HE15-0AA0 Series: SINAMICS Design: Line filter for 5 kW Smart Line module Rated voltage: 3 AC 380–480 V Frequency: 47–63 Hz Rated current: 12 A Connection phases: L1, L2, L3 Connection side: LINE / LOAD Mounting type: Control cabinet mounting Isdpfx Aajzdnkcotoif Housing: Metal housing Condition: used Location: Kusel Quantity: 2 units available

Condition: good (used), Mains choke, mains filter, frequency converter, drive converter, transformer -Manufacturer: Siemens, mains filter mains choke Simodrive -2-phase choke 36KW: 6SN1111.0AA00-0CA -Mains filter: 6SN1111-0AA01-2CA0 -Adapter set: 6SN1162-0GA00-0CA0 -Distribution/Price; complete -Dimensions: 580/250/H310 mm -Weight: 41.6 kg Iijdpswcywbsfx Aatjf

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. Isdpfx Ajw U Tlzjatsif PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, Year of construction: 2018, Dust extraction system Manufacturer: Nawara Iiodpjzuz S Usfx Aatef Type: RUBIN 2030 Year of manufacture: 2018 Technical data Application: - Designed for the extraction of dry dust and wood shavings - Suitable for woodworking and industrial dust extraction Performance: - Airflow rate: approx. 30,000 m³/h System features: - Stationary modular filter system - Warm air recovery system (summer/winter operation with adjustable damper) - Designed for continuous operation Compliance: - Complies with EU Machinery Directive 2006/42/EC - Complies with ATEX Directive 2014/34/EU (for potentially explosive atmospheres) - Meets the relevant Polish regulations on machine safety Air lock / discharge system: - Type: SL 1400 EX - Length: 1400 mm - Height: 360 mm - Connecting frame (top/bottom): 1490 x 420 mm - Drive type: Direct drive with elastic coupling (Rotex 38) - Gear motor: SEW R47 DRN80MK4 (Option: DRN90S4) - Speed: 15 rpm (Option: 29 rpm) Electrical data: - Power supply: 380 V / 50 Hz Dimensions (air lock unit): - L W H: 2000 x 420 x 360 mm Installation: - Complete external filter system included in the scope of supply - Internal piping within the factory included in the scope of supply, but subject to separate negotiations Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm Iisdpfxsy Tp E Ao Aatef The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: used, Year of construction: 2018, operating hours: 5,596 h, Equipment: ABS, all wheel drive, JCB TM320 T4F – CONSTRUCTION MACHINERY IN PERFECT WORKING ORDER!!!!! - HEIGHT 2.70M, CAN BE TRANSPORTED ON A FLATBED TRAILER!!!!! - GERMAN VEHICLE - SOLID RUBBER TIRES - SELF-PROPELLED WORK MACHINE, SEE INSPECTION REPORT - CABIN: PORS/FOPS - LIFT ARM WITH WHEEL LOADER ATTACHMENT AND TWO HYDRAULIC AUXILIARY CIRCUITS - HYDR. REVERSE FAN FOR AIR CONDITIONING SYSTEM - DRIVER'S SEAT WITH AIR SUSPENSION - BUCKET TYPE: BUCKET 240 HDXL, VOLUME 1 CUBIC METER OPERATIONAL DATA JCB TM 320 T4F (HOMEPAGE) ? Model: JCB TM 320 T4F ? Machine Type: Telescopic Wheel Loader ? Application Areas: Agriculture, Construction, Recycling, Industry, and Handling Operations Engine & Performance ? Engine: 4.4-liter JCB EcoMAX T4F engine ? Emission Standard: Tier 4 Final / Stage IV ? Engine Power: 93 kW / 125 hp ? Maximum Torque: 550 Nm at low engine speeds ? Exhaust Aftertreatment: SCR technology with AdBlue, without diesel particulate filter Drive & Transmission ? Transmission: 4-speed powershift transmission ? Torque Converter Lock-up: TorqueLock ? Maximum Speed: up to 40 km/h ? Drive: permanent all-wheel drive ? Differential: locking differential Lifting Capacity & Hydraulics ? Rated Load Capacity: 3,200 kg Ijdpfx Aaszt Ub Hoteif ? Maximum Lifting Height: approx. 5.20 m ? Maximum Forward Reach: approx. 2.95 m ? Hydraulic System: Load-Sensing Hydraulics ? Hydraulic Output: 140 l/min ? Breakout Force: 62.6 kN Dimensions & Weight ? Operating Weight: approx. 8,142 kg, depending on equipment and tires ? Overall Length: approx. 6.32 m including standard bucket in transport position ? Overall Width: approx. 2.35 m ? Height over Cabin: approx. 2.72 m ? Wheelbase: 2.55 m ? Turning Radius: approx. 4.35 m ? Articulation Angle: ±43° * Fuel Tank Capacity: 160 liters Brief Description ? The JCB TM 320 T4F combines the maneuverability of a wheel loader with the reach of a telescopic loader. ? Due to its high lifting capacity, powerful engine, and good maneuverability, the machine is ideal for professional applications. ? The permanent all-wheel drive and powerful hydraulics ensure reliable performance even under heavy-duty conditions.

Condition: good (used), mileage: 153,323 km, power: 294 kW (399.73 HP), first registration: 05/2009, fuel type: diesel, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: electric window regulation, power mirror, - Brake booster - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Windshield - Power take-off (PTO) Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 Engine displacement: 10,518 cc GVW: 35,000 kg Body manufacturer: WIELAND B.V, BB.8200 TG Technical condition: good Optical condition: good MAN TGS 35.400 BB 8x4 WIELAND BLOWVAC BIGBAG 8200 – DRY MATERIAL SUCTION/BLOWING SYSTEM First registration: 04.05.2009 Operating hours: 13,442 hrs Drive: 8x4 Suspension: Leaf spring Iedpfx Ajzvc Akjateif Engine power: 400 hp For sale is this MAN TGS 35.400 BB 8x4, equipped with a professional Wieland dry material suction/blowing system, type BlowVac BigBag 8200. This heavy-duty industrial unit was specifically designed for the suction, collection, transport, blowing, and filling of dry materials and bulk goods. Thanks to the powerful vacuum system and extensive equipment, this vehicle is suitable for numerous industrial applications. CHASSIS / TRUCK * MAN TGS 35.400 BB * 8x4 drive * Engine power: 400 hp * Heavy-duty MAN chassis * Leaf spring suspension * Suitable for heavy industrial applications * First registration: 04.05.2009 WIELAND DRY MATERIAL SUCTION SYSTEM Manufacturer: Wieland Type: BlowVac BigBag 8200 Design: Industrial dry material suction/blowing system Equipment includes: * 3-vane rotary piston vacuum pump * Maximum vacuum / maximum suction power: 900 mbar * Total container volume: 10 m³ * Suitable for the suction of dry materials and bulk goods * Blowing system available * Filling system available * BigBag system * Controlled emptying and filling of the collected material possible SUCTION CONNECTORS * Suction connector Ø 200 / 150 mm * Dome lid with suction connector * Large maintenance opening * Good accessibility for cleaning and maintenance work FILTER CHAMBER The Wieland system has a separate filter chamber for processing dry and dusty materials. This makes the system particularly suitable for applications where larger quantities of dust, powder, sand and other dry materials need to be collected. OPERATION & EQUIPMENT * Remote control * Blowing system * Filling system * BigBag system * Storage area * Storage area with sideboards * Various connections for suction hoses * Maintenance opening to the filter chamber * 2 supports at the rear of the vehicle * Heavy-duty industrial design OPERATING HOURS 13,442 operating hours APPLICATION POSSIBILITIES This MAN/Wieland combination is suitable for, among others: * Industrial cleaning work * Suction of dry bulk goods * Sand and dry construction materials * Dust and powder * Cement-like materials * Production residues * Cleaning of silos and industrial plants * Factories and industrial plants * Construction and infrastructure projects * Filling into BigBags * Blowing out of the collected material DESCRIPTION A heavy-duty...

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Iijdezd Sk Hopfx Aatef Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Delivery: EXW Székesfehérvár, Hungary. An optional 16 m3 bucket is available at an additional cost.

Condition: used, Year of construction: 2019, operating hours: 4,240 h, functionality: fully functional, Used Cone Crusher HCU 7/160 After Complete Refurbishment – Available Immediately We offer for sale a fully refurbished cone crusher HCU 7/160 after complete overhaul and replacement of internal wear parts with new ones. The machine is in very good technical condition and ready for immediate operation. Price: EUR 89,900 – complete crushing unit + EUR 16,890 – new hot-dip galvanized supporting steel structure with stairs, walkways, and operator platform Iiedpfx Aasy Nxnretef Scope of Supply 01 – Complete Crushing Unit with Cone Crusher HCU 7/35-160 Includes: Hydraulic cone crusher HCU 7/35-160 Oil station for crusher setting adjustment and bearing lubrication Common frame for crusher and drive Feed hopper 4 pcs rubber springs (silent blocks) Positive pressure dust protection system for crusher and oil tank (filter + blower) 90 kW drive, 400 V, 50 Hz Automatic control system with visualization Automatic grease lubrication Power control cabinet, Y/D motor starting Refurbishment and Technical Condition Complete general overhaul of the machine New internal wear parts Refurbished electrical control cabinet Ready for immediate operation Robust design suitable for quarries, recycling, and mining operations Optional – New Steel Structure Available completely new: Hot-dip galvanized supporting steel structure Stairs Service walkways Operator platform Structure price: EUR 16,890 Please contact us for more information or a commercial offer.

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Worktable: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Iiedpfx Asytruxjatjf Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: Isdpfxjy Urtfo Aateif The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2011, condition: used, functionality: fully functional, Tonnes produced - 1 800 000 Capacity - 350 t/h First erection in Poland - 2011 The machine has currently been dismantled into its component parts for transport. Cold feeders: Number of beans - 8/pcs Single bin capacity - 14 m3 Drying drum: Lenght - 11 m Diameter - 2,7 m Drum drive - 4 x 22 kW Burner - 2 types of fuel Burner capacity - 24 MW Mixing Tower Hot Bins: Number of fractions - 6 pcs Number of hot bins + baypass - 6+1 Total capacity of hot bins - 70 t Scales: Mineral scale max - 4 460 kg Bitumen scale max - 400 kg Filler scale max - 440 kg Puddle mixer: Mixer capacity max - 4 300 kg Mixer drive - 2 x 45 kW Ready mix storage: Total bins capacity - 90 t (2 x 45 t) Number of bins - 2 pcs Additives: adhesive, cellulose Bitumen tanks (vertical tanks system): Number of tansk - 4 pcs Total capacity - 320 t Electrical heating - 7,5+24 kW Filler silos: Silo capacity - 2 x 80 t Coal dust silo - 12 m3 Internal filler capacity - 80t Filter: Iiedpfx Aoy Nc Tfoatjf Producer - DM-IF 750 Air flow - 101 138 m3/h Motor capacity: exhaust ventilator 160 kW Filtrating surface 1 125 m2 Plan height - 27 m Transpor costs on the buyer’s side.

Condition: used, Year of construction: 2012, Automated system / Application area: Chrome plating, nickel plating, copper plating / Programs: Pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Product window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per carrier, cycle time 3.00 min. per system, cycle time 2.50 min. for demetallization / Capacity: 20 carriers per hour, clear anode spacing (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entry dimension 550 mm in travel direction, 3100 mm in width, tank dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: transport system 133 kW, filters 194 kW, exhaust air 229 kW, wastewater treatment plant 150 kW, switching systems 704 kW, rectifiers approx. 3190 kW, heating energy approx. 1410 kW / Consisting of: automated loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths and exhaust system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating plant since 2015! Iedoy Rvtuopfx Aatoif

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, overall weight: 410 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 0.6 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, New screw compressor for sale, available from stock. First-time commissioning has been completed. Simply plug it in and get started... Technical data: Drive power: 5.5 kW (also available with 4.0 kW) Controlled by a frequency converter (no high inrush current) Tank volume: 300 l Maximum pressure: 10 bar With refrigerant dryer 3-stage filter unit Automatic condensate drain Quiet operation thanks to sound insulation 1 year warranty 4250 CHF including VAT Feel free to come by for a viewing. Also, check out my other listings. Iedpfjzt Nrtex Aatsif

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 900 kg, rotary table diameter: 600 mm, rotational speed (max.): 50 rpm, overall weight: 9,000 kg, spindle speed (max.): 14,000 rpm, coolant supply: 40 bar, spindle motor power: 32,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis machining center with proven Heidenhain iTNC530 HSCI, M&H workpiece probe, 40 bar internal coolant supply with belt filter The machine is still under power and can be inspected near Straubing. Spindle hours: 10,500 h Iodpfsyzd Eyox Aateif Milling swivel head: - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable - 14,000 rpm - 160 Nm torque - Drive power 29 kW - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with blow-out function Integrated rotary table: - With torque motor and hydraulic clamping - Ø 610 mm - Extended clamping surface 1,100 x 610 mm General: - Heidenhain glass scales in all 5 axes - 40-position tool changer with double arm gripper - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area lighting

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Isdpfou A U Nkjx Aateif Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Travel monitoring ✓ Manufacturer's warranty until 03/26/2027 ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation ✓ Torque upgrade ✓ Ongoing maintenance with records Complete automated production cell The system is designed for the automated machining of round stock. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg The WEKAL automation system handles the loading and unloading of workpieces and enables economical operation with minimal manual intervention. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • Conveyor length WRB roller conveyor 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm • Torque upgrade • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Travel monitoring • Automatic door drive • Robot interface Documentation and condition The system is in like-new and fully functional condition. Iisdpfx Aajzhltcotef • Complete documentation available • Ongoing maintenance including records • Manufacturer's warranty until 03/26/2027 • Available in the short term The system can be inspected while powered on. Training and instruction are possible. Programming and setup of your components are possible. Sale ex works. Buyer organizes disassembly, loading, and transport.

Condition: used, Year of construction: 2016, operating hours: 43,000 h, functionality: fully functional, System consisting of: 1 welding robot Qirox QRC 350-E incl. V7 Adv. controller, programming handheld device with 15 m cable, 24 V buffer, 2 GB flash drive, external cooling unit. Software expansion: Iiedpfx Aezmyfweatjf Gas nozzle sensor, arc seam tracking, point editor, transformation, parameter interlocking, multi-layer technique, Manax Offline laser ICSE LD Welding equipment: Qineo Puls 600 (600A) with Premium control module, wire feeder, burner hose package, welding torch MRW 510 evo, Duo drive CDD 2, torch test gauge individual as well as with CDD, mechanical cleaning with wire cutter, external cleaning, pressure booster, wire spool equipment. Elevated track 20 kN, travel path 10 m, 2 track supports. 2 L manipulators WPS-TS 7.5 kN, rotation radius 1100 mm, load capacity 750 kg. 2 adjustable counter bearings, travel distance 3 m, manual. Connection control, 2 start pre-selection, partition walls and 2 sliding gates incl. end switch protection. 1 filter unit Tecau 6000 m³ extraction capacity, 1 extraction hood 3x2.5 m with curtains, suction slit channel. Documentation, CE declaration. The system was dismantled in June, inspected before dismantling, and regularly maintained by Cloos.

Condition: used, OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Iisdpfx Ajwpm Nweatef Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight sections/curves/switches see RA1994 All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller Iisdpfsnah Dnox Aatof -Manufacturer: KEB, frequency converter Drive Controller Combivert -Type: 12.56.200-A349 92280163/053049 -Power: 5.5 kVA -Dimension: 355/245/H220 mm -Weight: 6.7 kg

Year of construction: 2025, operating hours: 225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973LZT031244, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) Ijdpfxeztakyj Aatsif - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: good (used), Year of construction: 2020, BRONNEBERG FF600 Alligator Shear Compact, easily transportable alligator shear for effectively cutting and cleaning light metals. The Forfex-500 features a mechanically adjustable counter blade and a protected shear head. The protected shear head is operated with a mechanical foot pedal for single cuts or continuous cutting. This alligator shear is designed to provide the operator with an optimal view of the material being cut. The blades of the Forfex-500 shear can be rotated up to four times. Features: Easy to transport within your scrap yard Mouth opening and cutting speed adjustable. Iodpfx Aaozux S Sotsif Simple adjustment of the desired mouth opening Equipped with an oil filter as standard Specifications Drive: Electric 400 Volt - 7.5 kW Cutting capacity: Ø 40 mm (St 37) Blade length: 500 mm Blade opening: max. 275 mm Dimensions: 1,850 x 700 x 1,500 mm Weight: 1,135 kg

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Iisdsy Avh Nspfx Aatsf Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 111,111 mm, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Isdpfx Asy Sfx Nsatoif Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!