Used Italpresse Veneer Press for sale (12,399)

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R adhesive applicator - 1300 mm - NEW MACHINE - Feeder from the adhesive applicator to the conveyor - Infeed conveyor, 6000 mm long x 950 mm wide, with drive - ORMA 5100x1400 mm surface hydraulic press - 12 pistons, hot water plates, refurbished - Outfeed conveyor, 6000 mm long x 950 mm wide, with drive This press requires medium to high pressure for operation to ensure that the boards are 100% flat. Dimensions of veneering boards: 5100 x 1400 mm (solid, drilled steel boards) Board opening: 180 mm Pressure at full surface: up to 10 kg/cm2 Number of hydraulic pistons: 12 pcs - piston diameter 140 mm Teflon MYLAR film on the boards Fodpfxovva Sye Aivspn Preparation for heating the boards with hot water - without a boiler Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine has been completely refurbished, adjusted, and tested. Price: EUR 49,000,- excluding VAT, without the OSAMA adhesive applicator Price: EUR 58,000,- excluding VAT, including the OSAMA adhesive applicator

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Fjdpfowd N Rmsx Aivopn Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: used, Plate dimensions 2.500 x 1.1250 mm Daylight opening 300 mm Fsdpoy Ty E Tofx Aivjpn Number of daylights 1 St. weight of the machine ca. ca. 3 t kg Year unbekannt

Condition: excellent (used), functionality: fully functional, Shelf length 2500 mm Shelf width 1200 mm 4 hydraulic pistons 75 mm Fedpfxoz D Afle Aivspn Clearance 400 mm Water heating

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Fpjdpfx Aijy Egkgsvsn Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Fpjdpfxsv Sthgj Aivsn Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1971, Max. pressing length: 2500 mm Max. pressing width: 1300 mm Total pressing force: 60 t Press opening width: 350 mm Heating plate material: Aluminum Operation: Hand lever Number of pressure plungers: 6 pcs Approximate weight: 3500 kg Fpsdpfez Hl Nrsx Aiven Dimensions: 3230 x 1340 x 1775 mm Location: Nattheim

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press Fodpfx Aiex Dzvxsvepn 4 cylinders Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Pressing force 90 tons Year of manufacture 1994 Price 7,500.-

Condition: excellent (used), Shelf length: 250 cm Fjdpexgnp Defx Aivspn Width: 130 cm Four actuators

Condition: used, Year of construction: 1976, Pressing area: 2500mm x 1250mm Fpsdpfx Aex Edl Eoiven Opening: 360mm Top platen heating: electric Bottom platen heating: defective Platen surface: aluminum, anodized Pressing force: 90t Number of cylinders: 4 Power consumption: approx. 33A Machine length: 3000mm Machine width: 1500mm Weight: 4000kg

Condition: like new (used), 11 upper hydraulic clamps 5 front pneumatic clamps Possibility to deactivate individual cylinders Maximum working height: 124 cm Clamp width: 16 cm Maximum working length: 13 m Machine length: 15 m Machine width: 110 cm Fpjdpfxszx Ai Ao Aiven Machine height: 270 cm Pump power: 3 kW Stepless adjustment of clamping force Weight: 5000 kg

Condition: used, functionality: fully functional, Manni shelving press for veneering, 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Feed height: 410 mm Working pressure: 300 bar Press with 4 cylinders Fjdpfxezmh Nde Aivopn

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled Fodjzzbb Nspfx Aivspn MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Number of transport packages: 1 pc EQUIPMENT Remote control

Condition: used, Used Machine Fpedszk Nyxepfx Aivon Features and Technical Specifications: - Pressing area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 metric tons - Configuration: 1 stage - Heating plates: gold-anodized ELKOM energy-saving plates - Opening width: 350 mm - Rated power: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 × 1,250 × 1,750 mm Availability: available shortly Location: Röllbach

Condition: excellent (used), working length 3300 mm working height 1800 mm 3 vertical cylinders 2 horizontal cylinders Fpsdpfjy Uuwaex Aivsn manual operating mode

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Fpsdpfx Aijzkl Ifsvon Piston diameter: 70 Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Weight approx. kg: 4000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Veneer press OTT Type JU 60S Fpedpevdaymefx Aivjn Pressing area max. 225x120 cm Electric

Condition: good (used), Columbian Press 1858 Letterpress Fsdpfx Aioz N Shbovepn Manufactured in Great Britain by Henry Watts Year of manufacture 1858. Can be used as a work machine or as a museum exhibit.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: A7879, functionality: fully functional, pressing force: 70 t, overall weight: 3,000 kg, opening width: 400 mm, TECHNICAL DETAILS Heating temperature: 70 - 100 °C Total pressing force: 70 tons Specific pressing force: 2.5 - 3.5 kg/cm² Opening width: 400 mm MACHINE DETAILS Control: Push-button control for opening, closing, and stopping Drive: Electro-hydraulic Heating plates: Aluminum Dimensions of heating plates: 2,550 x 1,100 mm Heating: Electric Hydraulic cylinders: 4 Diameter of hydraulic cylinders: 80 mm Fodpfozktpqsx Aivjpn Rated voltage: 380 V Type of current: 3~ Frequency: 50 Hz Control voltage: 220 V Rated current: 21 A Power: 13.6 kW Dimensions & Weight Transport dimensions: 2,900 x 1,400 x 2,000 mm Weight: 3,000 kg EQUIPMENT Safety pull cord Pressure monitoring (automatic adjustment) Adjustable limit switch for specific opening width

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fjdpfx Aioyazdievspn Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: like new (used), shelf length: 3500 mm shelf width: 1300 mm shelves made of stainless steel pistons and seals replaced number of pistons: 10 Fodpfx Aiozyagujvepn piston diameter: 85 mm water heating weight: 6100 kg

Condition: new, Year of construction: 2026, The VPR-4000 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-4000 press is also swiveling and mobile. Possible applications: Veneering / Form gluing / Encasing... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work surface: 4000x1500mm Pump power: 0.75 kW Vacuum pump capacity: 40 m3/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Fsdpfjyr R Hwsx Aivspn Weight: 400 kg Location: In stock at warehouse 54634 Bitburg - free loading -

Year of construction: 1994, condition: ready for operation (used), Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800t, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible. Fjdsu Rp Hmspfx Aivjpn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shelf length: 3100 mm Fpjdpfx Aioztcuzjvon Shelf width: 1300 mm Clearance between shelves: 44 cm Number of pistons: 6 Hydraulic heating Safety cut-out with shear pin Year: 2015 Capacity: 5000 kg Power: 4 kW CE marking

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Fodoy A Hkbjpfx Aivepn Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg