Used Inox Behälter Gmbh Agitator Tank With Dissolver for sale (75,033)

Year of construction: 2023, condition: used, functionality: fully functional, The item for sale is an unused stainless acid-resistant steel tank with a capacity of 85,000 liters, equipped with a mixer. Hedpsxnm I Ijfx Ad Ron

Condition: new, Year of construction: 2026, Container 150 l thermally insulated with 13.5 kW /400 V heating with automatic temperature switch-off, rack, bag-in-box filling device with bag holder * simple, safe, optimum price-performance ratio * no temperature fluctuations * absolutely gentle heating due to large heating surface of 0.4 m² * with thermostat: switches off when temperature is reached * Height-adjustable stainless steel frame - the container runs completely empty "Free time" during the heating time approx. 40 min. for 150 ltr. Hourly output approx. 150 ltr. Hedjt U H Nrspfx Ad Rsn also available with 18 kW /400 V heating - hourly output 180 ltr. 2-digit bottle filling available You do not have a 400V connection? Container pasteurizer is also available with gas condensing boiler. ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Hedpfoylng Ujx Ad Rsn Tag No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and approved at the factory. Tests carried out, among others: • Pressure test per PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT according to test plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe system • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade welds • Manway DN 500 • Powder/product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and structured Extensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and guarantee certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding filler materials and gas • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Parts list compilation • Detail drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical fabrication with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and fully documented FAT inspection. Not a standard tank – this is audited project quality with comprehensive GMP-compliant documentation.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6725-BH1001 Serial No.: 1003455 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL SPECIFICATIONS Hjdpfxjykt T Rs Ad Rsn Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: 762 kg Product contact material: 1.4435 Permissible pressure (PS): -1 / +3 bar Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel compliant with PED 2014/68/EU Category IV Module G – Single Unit Inspection Notified body: TÜV SÜD Notification number: 0036 FAT – Factory Acceptance Test Full factory FAT conducted and documented. Testing includes pressure test, NDT (non-destructive testing), dimensional inspection, surface roughness inspection, and documentation release. FEATURES • Cylindrical horizontal pressure vessel • Double jacket for heating/cooling • Interior electropolished • Pharmaceutical-grade welding • Manway DN500 • Multiple process and instrument connections • Safety valve • CIP connections • Suitable for pressure and vacuum operation CONDITION • Never used in production • TÜV Module G certified • As-new industrial condition • Immediately available DOCUMENTATION – complete and available Comprehensive structured documentation including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT documentation • Material certificates • Welding lists and WPS/WPQR • NDT reports • Surface roughness protocol • Surface treatment report • Internal pressure test • Dimensional protocol • Calibration certificate (pressure gauge) • Component drawings • Assembly parts list • Operation and maintenance manuals (equipment & components) • Qualification certificates • Analysis certificates for welding consumables and shielding gases Complete digital documentation file available. APPLICATIONS • Pharmaceutical industry • WFI / PW • GMP-compliant plants • Sterile liquid processes • Biotechnology High-quality BRINOX pharmaceutical version with PED Cat. IV Module G single unit inspection by TÜV SÜD, complete FAT, and full technical documentation. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Hjdpjykkk Hjfx Ad Rsn Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Vessel – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Elution / Solution Vessel Volume: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: available (CE 0036) Vessel pressure: Hsdoykkhrspfx Ad Ren Operating pressure: -1 / +3 bar Test pressure: As per TÜV inspection Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: As per TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Single unit inspection Acceptance by notified body (identification number 0036) FAT – Factory Acceptance Test The vessel was tested as part of a documented FAT. The tests included, among others: • Verification of welding documentation • Visual inspection of weld seams • Leak testing • Pressure testing • Surface roughness inspection • Sensor calibration check • Layout and dimensional inspection • Documentation review The complete FAT report including test protocols is available. SPECIFICATION • Double jacket for heating/cooling • Entirely made of stainless steel 316L • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation ready (pressure, temperature, sensors) • Heavy-duty project construction • Lifting lugs for crane handling CONDITION • Never used in production • Surplus stock from project overrun • Interior absolutely clean • No corrosion • No signs of use • As-new industrial condition • Immediately available DOCUMENTATION – complete and structured Comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Material certificates (3.1) • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive testing reports (NDT) • Analysis certificates for welding consumables and shielding gas • Surface roughness protocol • Surface treatment report • Dimensional accuracy check • Internal pressure test • Calibration certificates • Assembly records • Drawings (detail and overall) • Operating and maintenance manuals Complete documentation file available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media SPECIAL FEATURE This is not a standard tank, but a premium BRINOX project build in true pharmaceutical quality with verified pressure design, full PED conformity (Module G), documented FAT testing, and comprehensive quality documentation. Project-level quality for sterile applications – available immediately.

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 50,000 l, Heating Oil Tank – Storage Container – Diesel Tank – Tank System – Steel Tank Brand new – with 50,000-liter capacity – built to EN 12285-2 – Class B (replacement for DIN 6616), above-ground, double-walled, including test certificate, suitable for installation in areas of seismic zone 0. The container is equipped with two saddle supports, a manhole with dome cover, and comes with the following fittings: • 1 fill pipe with TW cap (filling cap) and dip tube • 1 gauging pipe with dipstick and dipstick cap • 1 vent pipe with ventilation hood • 1 brand-new overfill prevention device with type approval (AIII) Hjdpfx Adsi A Hz Aj Rjn • 1 ladder and 1 spare socket for withdrawal purposes • 1 optical leak detection device with type approval and leak detection liquid The container is externally sandblasted, primed, and painted white / RAL 9016 (sample image – other RAL colors available on request). L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 t – ex works, free loaded General Information: You will receive an invoice with VAT indicated. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available! Additionally, we purchase existing tank systems and are qualified (certified specialist company according to § 62 of the German Water Resources Act) to professionally empty, clean, dismantle, and remove such systems.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: et50-neu-löwa, tank capacity: 50,000 l, this underground storage tank can be used to hold non-drinking water for the fire department or to retain rainwater to water for instance your sports ground Hedsd Tmaqspfx Ad Rsn

Condition: good (used), functionality: fully functional, machine/vehicle number: et50, tank capacity: 50,000 l, underground storage tank for firefighting water, rainwater storage Hsdpjcydt Ujfx Ad Ron

Condition: new, Year of construction: 2026, functionality: fully functional, We offer a storage tank for 5000 litre heating oil or diesel. Hedpfx Adoi Ar D Ss Rjn

Year of construction: 2026, condition: new, functionality: fully functional, Liquid fertilizer / AHL / ASL - Tank Container Storage tank Storage tank 100,000 liter capacity - brand new - above ground, made of sheet steel. The tank complies with DIN-EN 12285-2 (formerly DIN 6616-D), has 2 saddle feet, a ladder and is primed on the outside - on untreated sheet metal. D = 2.90 m - L = approx. 16.00 m. The container is fitted with a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The plastic inner liner has a "general building authority approval" and is therefore suitable for the storage of liquid fertilizer-AHL and NOx reducing agent AUS 32 (AdBlue). The price is ex works - free loading. (Delivery can be offered at an additional cost). We recommend: Sandblast the outside of the above container, prime and completely repaint - traffic gray / RAL color. (Other RAL colors are also available on request). ASL (ammonium sulphate solution) is a popular liquid fertilizer that is produced in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL containers require a plastic inner liner due to the corrosive properties of the storage medium. Hsdpei A Hxvofx Ad Rjn Important: The tank shown (sample photo) is a revised 100,000 liter tank that has already been delivered to a customer. The plastic piping (PVC connection) is not included in the scope of delivery and can be purchased for an additional charge. General information: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental systems are also available! In addition, we buy existing tank systems and can empty, clean, dismantle and remove them professionally with certified specialist company qualification in accordance with the WHG (Water Resources Act). ===== If you have any questions, please contact ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 34320 Söhrewald near Kassel / Hesse =====

Condition: refurbished (used), functionality: fully functional, Underground storage tank for non-drinking water with the capacity of 30000 litre. It can also be used to store water for fire department. The accesories can be purchased separately. We can also offer transport, please ask. Hedsi Ary Sepfx Ad Ren

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: et50-neu-HEL, new underground storage tank to store diesel or heating oil with the capacity of 50.000 litre Hsdpfxocydx Uj Ad Ren

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Specifications: Hedpfx Ajy Ryrnjd Rjn Capacity: 13,400 L

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Hjdpfx Adszachce Ron Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Hodpfx Asy Urvaod Ron Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Hjdpfey Urtfox Ad Ren Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Hsdpsh Uuhcefx Ad Rsn Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g Hsdpfx Aewymlysd Ren - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Hjdoy Urpyopfx Ad Rsn The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, travel distance Z-axis: 300 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) Hsdoxd Az Nspfx Ad Rjn - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, total length: 900 mm, total width: 1,550 mm, total height: 1,900 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm Hodpfxjunh H Sj Ad Ron - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, overall weight: 160 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,930 mm, input voltage: 230 V, input frequency: 50 Hz, laser wavelength: 10,600 nm, type of input current: AC, laser type: CO₂ laser, Equipment: lighting, With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. The LAS 28 laser model can optionally be equipped with a rotary axis (3-jaw chuck) for labelling cylindrical parts. Other options, such as lateral cantilevers for labelling long parts, can also be realised. 30W CO2 laser (optional: 60 W) - Wavelength 10640nm - marking field size 220x220 mm - optional: rotary axis (3-jaw chuck) - optional: exhaust system (incl. activated carbon filter) - optional: extension arm for large workpieces (also on both sides) - marking software EZCAD in German / English - Pilot laser (simple preview) - focus finder (easy focus adjustment) - max. part height approx. 300mm - electrically adjustable Z-axis Hsdpewkpyhsfx Ad Ren - Laptop incl. holder with operating system Windows - frame made of aluminum profile - air cooled - door width approx. 720mm / door height: 400mm - Connection 230V - Dimensions: approx. 1000 x 800 x 2000 mm (LxWxH) - Weight: approx. 140 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials Hsdpfoy Emthjx Ad Ren

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 600 mm, total height: 1,660 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) Hsdpfx Ajv Sybyed Rsn - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg