Used Incrementable Encoder for sale (1,083)

Condition: used, Sanyo MPR-311D (H) Medical Refrigerator, 340 liters Safe, reliable, and cool storage for valuable medical products Efficient temperature control A thermistor sensor and electronic temperature control ensure that the setpoint temperature is maintained. Even if the door is opened and closed from time to time, the fans ensure rapid temperature equalization, guaranteeing highly reliable and stable storage conditions that are not affected by the outside temperature. Equipped with a digital temperature display A clear digital temperature display allows for quick visual monitoring of the current operating temperature. To simplify visual temperature monitoring, the temperature is displayed in 1°C increments for a temperature range of 0°C to +15°C. Fan-forced circulation Thanks to the fan-forced circulation system, the temperature is evenly distributed throughout the chamber. Each corner of the unit is cooled immediately, with minimal temperature variations. Automatic defrost system During normal operation, the automatic defrost system switches on from time to time without increasing the chamber temperature. Over- and under-temperature alarm and safety devices Nwedpovi H U Uofx Akion If the chamber temperature suddenly drops below 0°C or rises above 15°C, the buzzer sounds. At the same time, the digital display flashes. If the chamber temperature drops below -2°C or rises above 20°C, the safety device prevents the contents of the refrigerator from freezing or the temperature from continuing to rise abnormally by activating the visual and audible alarm. A rigid polyurethane foam insulation keeps the chamber temperature stable and effectively protects against the ingress of warm air into the chamber. The inner chamber is made of chemically resistant stainless steel and provides reliable service for many years. Two easy-to-open sliding doors require less floor space. Temperature: +2/+15C Volume: 340 liters Dimensions: W x D x H 1800 x 800 x 470 mm Glass doors Interior: Stainless steel 220 Volts 158 Watts You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Bartscher Refrigerated Counter, 0°C to 10°C, TPBAR-7-180-14 1 unit – double the benefit: the convection cooling ensures a constant and even cooling temperature inside the refrigerated counter with 1 door and 4 drawers. Thanks to the high-quality and robust stainless steel surface, the unit can be perfectly integrated into any kitchen and also used as a work surface. • Number of drawers: 4 Nedpfx Akjxuqyneiown • Door hinge: Left • Door type: Hinged door(s) • Number of doors: 1 • Number of cabinets: 1 • Refrigerated cabinet: Yes • Refrigerated drawers: Yes • Standard drawer format: 1/1 GN • Connection value: 0.452 kW | 230 V | 50 Hz • Adjustable height feet: Yes • Temperature range: 0°C to 10°C • Adjustable height: 850 mm to 900 mm • Upstand: 50 mm • Cooling: Convection • Refrigerant: R134a • Digital display: Yes • Maximum depth of GN containers: 150 mm • On/off switch: Yes • Climate class: 4 • Drawer dimensions: W 299 x D 572 x H 190 mm • Reversible door hinge: Yes • Cabinet dimensions: W 335 x D 570 x H 554 mm • Number of shelves: 1 • Temperature control: Thermostatic • Control: Knob • Indicator light: On/off • Temperature control: electronic, in 0.1°C increments • Connection value: 230 V 50 Hz 452 W • Condensate evaporation: Yes • Thermostat: Yes • Work surface material: Chrome nickel steel • Material: Chrome nickel steel • Energy efficiency class: C (EU No. 2015/1094) • Dimensions: W 1,792 x D 700 x H 850 mm • Weight: 134.8 kg More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Hermle Z 200 A Centrifuge – Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A can accommodate up to 12 x 15 ml tubes with conical and round bottoms. Specifications: Capacity: max. 12 x 15 ml / 6 x 50 ml Speed: max. speed/RCF: 6000 rpm / 4185 xg min. speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: button-controlled in 250 rpm increments Speed display: preset and actual speed – digital Run time: max. time: 30 min. / continuous operation min. time: 0.5 min. Preset: 0.5 - 30 min. / “Hold” Time setting: 0.5 min. increments via button press Time display: remaining time – digital Brake: fixed braking force with soft stop Features: - Microprocessor-controlled - DC motor, covered - ABS plastic housing, impact-resistant and chemical-resistant Safety: - Lid locking system - Automatic imbalance detection with safety shut-off - Manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inches): Width: 28 / 11.0 Height: 26 / 10.2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Njdpfxsm Albde Akiewn Item condition: used, top condition You can find more centrifuges – new and used – in our shop! International shipping costs available upon request!

Condition: used, Kistler 2151B30154002 Electromechanical NC Joining Module List price: €19,000 net   The NC joining modules NCFH type 2151B... consist of a robust housing in which a position sensor is integrated as an absolute encoder and a piezoelectric pressure/tension force sensor. The pressure or tension forces acting on the sensor generate a proportional electrical charge in the piezoelectric measuring element, which is converted into an analog voltage signal by the integrated charge amplifier.   The drive motor is an electronically commutated AC servo hollow shaft motor, which is controlled by a servo amplifier. Constant speed, i.e. constant travel speed, is ensured. Standard functions such as joining on a block, positioning, and force-controlled joining, as well as moving to intermediate positions, are supported.   Technical data: with hollow shaft motor and compact design Integrated piezoelectric force sensor including charge amplifier and position absolute encoder Measuring direction: pressure / tension Nsdeiuxtiepfx Akijwn Measuring range 1: 30 kN Measuring range 2: 15 kN Stroke: 400 mm Path repeatability: 0.01 mm Max. travel speed: 300 mm/s With holding brake   Item condition: new, with signs of storage   You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Cole Parmer Vacuum Oven The Cole-Parmer vacuum ovens are designed for drying under carefully controlled conditions – normal atmosphere, vacuum up to 30" Hg, or inert gas atmosphere. The oven is suitable for drying, vacuum embedding, electroplating, and processing electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the oven. All controls and connections (except for power) are located on the front in a vertical panel. The illuminated power switch, vacuum gauge, temperature controller, vacuum control valve, and nickel-plated brass hose connections are located on the front for convenient operation. The radiant heat from the heated wall, without exposed heating elements, ensures uniform heat and maximizes the internal volume. The temperature is controlled by a hydraulic thermostat. The vacuum values are precisely regulated between 0 and 30 inches of mercury. The silicone door seal ensures a tight seal at all vacuum levels. A window made of high-strength tempered glass, fully protected by a safety grille, provides a full view of the oven contents. The two aluminum shelves conduct heat well to the samples. The shelves can be easily removed. The continuous wool insulation ensures a uniform temperature. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Nwsdpfx Akowxxgaoion Dimensions: 510 x 420 x 1200 mm Chamber: (H x W x D) 254 x 254 x 305 mm (19.8 liters) Thermometer Bimetallic, dial type; range from 0 °C to 300 °C in 5 °C increments You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, machine/vehicle number: 68.579, Year of construction: 2021, operating hours: 493 h, load capacity: 2,700 kg, lifting height: 5,050 mm, free lift: 1,592 mm, fuel type: electric, mast type: triplex, construction height: 2,514 mm, fork carriage width: 3,300 mm, fork length: 800 mm, empty load weight: 4,540 kg, total length: 1,695 mm, drive type: Elektro, construction width: 2,500 mm, Multi-directional forklift Chassis number: 68.579 Load center: 400 Fork width: 120 mm Fork thickness: 50 mm Mast type: Triplex Transmission: Planetary Condition: As new Technical condition: very good Front tire type: Superelastic Nwodpfx Aezn Dzljkion Front tire size: 381 x 127 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 457 x 229 Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: HUBTEX / TAB Aquamatik + EUW Battery type: PzS Battery year of manufacture: 2021 Battery condition: 80 - 100% Description: Handling of steel profiles and bundles, 6 - 8 m long, max. 1200 kg weight, load capacity according to load chart, multi-directional steering system for longitudinal, lateral, circular and diagonal travel, high-performance steering, operation via push-button switches, fingertip levers and rotary encoders on the handle, standing cabin SU 675 x 690mm, display type Engage 2, fork positioner, 3rd valve, 4th valve, semi-cabin, full free lift, CE certificate.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? Nedpe Afg S Eofx Akiswn - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Cantilever shelf, double-sided, new goods Data: Nodj Aff Tbjpfx Akiown - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Nedpfxjzwmz Ts Akiown Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: ready for operation (used), Fanuc A860-0382-T255 Magnetic Pulse Encoder, serial number J-005088, used, in good condition, 100% functional, scope of delivery as shown in the photos. Njdpfx Ajzuu Dkskijwn

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Njdpfxjzuyywj Akijwn Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Rexroth MDD071C-N-060-N2S-095GB0 Permanent Magnet Motor, without encoder, serial number 4226, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwodpfx Aszt H D Tskijn

Condition: ready for operation (used), Year of construction: 1988, machine/vehicle number: 100.613, functionality: fully functional, Machine available for immediate delivery. Forklift available for loading. 2 cylinders per pressing unit. Cylinder stroke approximately 110 mm. Nwsdpfx Akjy Tly Asien Maximum pressing force approximately 1000 kp. Working width 250 - 2500 mm. Working height 250 - 1250 mm. Working depth max. 600 mm. Electric height adjustment of the central vertical unit with scale. Manual adjustment of the central horizontal unit in 50 mm increments with pneumatic clamping. Separate control of the vertical and horizontal pressing units via hand control valve. Pressure force regulation 4 - 10 bar.

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Technical data: Table: Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Nwedsy T E Rzspfx Akien Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: used, Escap 61VM82-000-6 Motor inkl. ROD 426 Encoder Njdpfx Asyr Sncekiewn

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: Njdpfxsxabaco Akiswn - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: like new (used), Year of construction: 2003, TECHNICAL SPECIFICATIONS X axis travel: 1,500 mm Y axis travel: 750 mm Z axis travel: 500 mm Worktable height: 820 mm Open height (clearance): 920 mm Maximum workpiece weight: 100,000 N Maximum load on head: 4,000 N Tank type: Fixed Tank dimensions: 2,300 x 1,300 x 700 mm Worktable size: 1,700 x 1,000 mm Usable dielectric height: 620 mm GENERATOR Standard minimum surface finish: VDI = 0 Power: 60 A MACHINE EQUIPPED WITH Generator with 120 A Expert System Fixed worktable 1,700 x 1,000 mm CNC for simultaneous axis control Integrated ONA C-axis with automatic System 3R Macro Standard chuck Eco-friendly filter with automatic cleaning cycle Dielectric temperature control system Year of manufacture: 2003 MACHINE FEATURES Fixed-table structure ensuring stable operating conditions, equipped with leveling supports Stabilized grey cast iron structure (base, column, tables) X-Y-Z movements via high-precision class A ball screws, driven by three DC motors Motion on prismatic roller guideways Position detection via linear glass scales Improved front accessibility with retractable front door system Nodpfx Asxwma Aokijwn Fixed working tank Integrated C-Axis (mounted on the head) Maximum speed: 40 rpm Resolution: 0.001° Maximum load (static C-axis): 500 N Maximum load (dynamic C-axis): 120 N Heidenhain encoder Toothed belt transmission Maximum current without rotation: 120 A Maximum current with high-speed rotation: 60 A Maximum current with slow rotation (0–1 rpm): 12 A Moment of inertia: 2,000 kg/cm³ GENERATOR FEATURES Modular design Programmable parameters Maximum power: 60 A EXPERT SYSTEM Controls the entire erosion cycle, from roughing to final surface finish, automatically adjusting spark parameters to ensure maximum generator efficiency and highest machining speed. Dedicated software for deep ribs Dedicated software for finishing large homogeneous surfaces Fully unattended machining capability with maximum productivity and excellent final quality Process parameter monitoring via screen and control panel display Automatic anti-collision system preventing electrode damage in case of accidental contact with the workpiece TECHNICAL DATA Pulse duration (Ton): continuously adjustable from 1 to 6,500 microseconds Pulse interval (Toff): continuously adjustable from 1 to 6,500 microseconds Copper electrode volumetric wear: 0.2% Graphite electrode volumetric wear: 0.1% Surface finish Ra (CLA): 0.1 micron – VDI = 0 Maximum material removal rate: 600 mm³/min Power consumption: 10.7 kVA Current intensity: adjustable from 1 to 12 (manually or via program) Highly sensitive servo control system High erosion stability

Condition: new, Technical data for the shelving rack: Shelving system: META Type: CLIP Technical data for installation: Number of shelving rows: 1 unit Rack length: 3,200 mm Number of bays per shelving row: 2 units Number of wire mesh shelves: 5 units per bay Scope of delivery includes: 04x Rack uprights, new Material finish: sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustment increment: 25|25 mm Including base plates, end caps, and bracing The uprights are pre-assembled 2,000 mm high 835 mm deep 15x Wire mesh shelves, new Material finish: sendzimir galvanized Total width: approx. 1,000 mm Total depth: approx. 800 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Reinforcement beams (03 pcs): 750 x 18 mm Weight per piece: approx. 5.14 kg Max. load per shelf: 200 kg, with evenly distributed load 08x Levelling plates, new Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material finish: sendzimir galvanized 60x Shelf supports, new Weight per piece: approx. 0.014 kg Material finish: sendzimir galvanized 01x Cross brace, new Material finish: sendzimir galvanized 01x Load sign With information on bay and shelf load, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Nodpfjxdxdtex Akiewn This item is only offered for collection. Additional transport or shipping of this item is associated with extra costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm Njdpeulnb Dsfx Akiswn capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø Nwodpfxsuxfupo Akien ±8 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding Nodpfx Akoq Atxyeiswn  

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Standard Equipment Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Nodpfx Aonzh Uijkiown Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Nwjdpfx Ajh Ha Ipskisn Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) Njdjd Iipropfx Akiewn • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Year of construction: 2025, condition: ready for operation (used), Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine. • Capacity: 1500 mm width x 1–3 mm thickness (AL/MS), up to 1.5 mm (SS), 6-ton coils • Materials: Aluminum (AL), Mild Steel (MS), Stainless Steel (SS) • Finished sheet size: width 500–1500 mm; length 500–4000 mm • Coil specs: ID 490/610 mm; OD max 1400 mm; weight max 6000 kg • Line speed: 30 m/min free working speed (start-stop shear adds ~2.5 s per cut) • Operators: 1 • Power and utilities: • Electrical: 380 V, 3-phase, 50 Hz; auxiliary 220 V, 50 Hz; 24 V DC solenoids • Installed power 32 kW; typical working consumption 13 kW • Pneumatic air: 6 bar • Hydraulics: service 120 bar; main service 220 bar; 2 hydraulic units, each 40 L • Control and electronics: Siemens PLC; Siemens/Rexroth electronics and control panel; 7" touchscreen; remote support capabilityLine configuration (included modules and key specs) • Hydraulic coil loading car: • Capacity 6000 kg (single coil), max width 1500 mm, max OD 1400 mm • V-type bed, hydraulic traversing and lifting (300 mm stroke), panel control • Single-mandrel hydraulic decoiler: • Capacity 6000 kg; max strip width 1500 mm; ID 490–610 mm; OD 1400 mm • Hydraulic mandrel with conical expansion; motorized drum with reducer, adjustable speed • Upper pressure/safety arm; laser sensor for controlled decoiling and auto stop • Automatic routing/threading platform with servo bending arm: • Automatic coil threading and transfer to straightener Nsdpszwc Ipjfx Akiewn • Bending arm: 2 rollers Ø110 mm, servo-driven; 2 pistons • Platform movement: hydraulic up/down and fwd/back; automatic, no manual threading • Straightening unit: • Speed up to 30 m/min; working width 500–1500 mm • 11 rollers total: 7 straightening, 2 feeder, 2 pinch (all Ø110 mm) • Motorized straightener adjustment; hydraulic openable roller group • Pneumatic roller pressure; low-backlash gear group; gear material 8620 • Vertical bearing guides; 2 guiding units; width adjustment via gear system • PVC coating feature included • Servo feeder: • Speed up to 30 m/min; max width 1500 mm; thickness 1–3 mm • 2 servo rollers (upper/lower) Ø110 mm; roller material 4140 • Encoder-based cut-to-length control; pneumatic pressure; low-backlash gears • Guiding: double-sided lateral guides, horizontal guide rollers, gear-width adjustment, right/left alignment to 90° • Servo control: automatic feeding cycle, programmable velocity, programmable cut length and quantity, memory for 250 programs and up to 50 lengths, 7" touchscreen, 8 external outputs • Start-stop guillotine shear: • Cutting capacity 1–3 mm; width 1500 mm • Blade material 2379; high-carbon/high-chrome blades; 2 edges upper, 4 edges lower • Adjustable blade gap; mechanical sheet clamping • Approx. 2.5 s cycle time loss per cut; Teflon slideways on cutting beam • Hydraulic and pneumatic brands: Bosch Rexroth/Bucher hydraulic valves; Festo/Pemaks pneumatics; motors Gamak/Yilmaz • Electrical/automation: Siemens PLC; Siemens/Rexroth components; electrical cabinet and automation systemNotes • Stainless steel capacity limited to max 1.5 mm thickness.