Used Immequip Engineering Ds-H400-3460 for sale (18,863)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, lifting height: 3,300 mm, mast type: duplex, gearing type: hydrostat, battery voltage: 24 V, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. Gisdpfew Izrcsx Amuot All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Gijdpfxsw U Sw Ao Amujt Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm Gijdpfx Ajcmr D Homuot control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: good (used), Used pressure vessel with insulation on castors Item number: 10779 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: 0.5 bar Operating pressure sheath: 1.5 bar Max. Max. operating temperature: + 95 °C Gjdpjrl Rrtofx Amujit Tank dimensions: Manhole: 400mm Outer diameter: 830mm Height of rollers: 880mm Total height: 1720mm Total width: 1090mm Total length: 1090mm Materials Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Equipment: Type plate: Yes Spout diameter: 25mm Distance drain to floor: 390mm Empty weight: 184Kg Rolling frame prepared for agitator

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Gsdpfxoxtfqxj Amueit Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 Gedpeclupdjfx Amusit electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm Godou Ibu Ropfx Amueit -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: good (used), Used agitator tank with insulation on castors Electric heating does not work! Item number: 10784 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: +0.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 410mm Inner diameter: 700mm Outer diameter: 800mm Height of the feet: 870mm Total height: 1700mm Total width: 870mm Total length: 950mm Cylindrical height: 650mm Materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: Yes Giedpfx Ajrl Rtusmujt Outlet diameter: DN25 Distance drain to floor: 365mm Propeller agitator Empty weight: 184Kg

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Gedpfsx Anq Hox Amujit Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Gisdjynzg Hopfx Amust Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Year of construction: 2023, condition: as good as new (ex-display), Technical data: Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for Giodpfx Ajncd Dujmujt lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR.

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for Giodpfx Amsncd Azjujt lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: ready for operation (used), There are two pipe pasteurisers available, including storage tank, capacity: 7000l. Godpfsgi Nxajx Amuoit

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Gijdpfx Aeihp Ipomuot

Condition: good (used), Year of construction: 2018, Manufacturer: DS AUTOMOTION GmbH Machine type: Industrial truck Design: driverless transport vehicle (AGV) Year of construction: 2018 Operating hours: 504 hrs Mileage: 870 km Condition: good (expert opinion by Dekra) Speed v min.: 0.1 m/s Speed v max.: 1.2 m/s Transport load: 1,200 kg Drive type: Servo geared motor, brushless Drive power: 2x 1.09 kW Operating modes: Automatic (control station) or manual operation (wired remote control) Power supply: Lithium ion battery 24 VDC (25.2 VDC) Giedpfjt Ebgtsx Amuet Make: Triathlon Battery capacity: 100 Ah Battery weight: 50 kg Area of use: closed room, max. 80% humidity Length FTS: 1,650 mm Width FTS: 990 mm Height FTS: 505 mm AGV ground clearance: 30 mm Max. length of transported goods: 2700 mm Max. width of transported goods: 1800 mm

Condition: used, functionality: fully functional, For sale: Accessory set for excavator by RSL Engineering for vehicle dismantling – pincer (clamp) with rotator, including arm and adjustable width mounting system, as well as strippers for wiring harnesses, alternators and starters, vertical and horizontal blades. Gijdoxzrw Iepfx Amuot Includes hydraulic hoses. All fully functional.

Year of construction: 2024, condition: new, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250Kg) / KD63 motor / DRF200 friction drive Replacement fan cover / fan cover - not an original part! OEM part number 12481133 Gedsq U Iitjpfx Amusit Larger quantities are also available - please inquire. NEW, unused Item location is 75053 Gondelsheim See pictures

Condition: new, Roller diameter: 140 mm Gsdjyucu Sopfx Amujit Roller width: 50 mm Bore diameter: 35 mm Keyway: 10 mm Price per piece: 52 EUR

Condition: new, Roller diameter: 140 mm Roller width: 50 mm Bore diameter: 35 mm Keyway: 10 mm Godpfx Amsyucufjusit Price per piece: 37 EUR

Condition: new, We offer feed rollers in our range. The rollers are new. Price per piece: 20 EUR. Gjdpfx Asyuctusmujit

Condition: new, Technical data: Number of spindles: 23 Max. workpiece size: 885 x 3000 mm Giodjyub D Sspfx Amuot Distance between first and last drill: 704 mm Distance between the centres of each spindle: 32 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Operating pressure: 6 - 7 bar Motor power: 1.5 kW Air consumption: 10 l/cycle

Condition: new, Technical data: Number of spindles: 42 (21 + 21) Spindle pitch: 32 mm Total spindle width in head: 640 mm Working table height: 860 mm Working table dimensions: 885 x 349.5 mm Motor: 2 x 1.5 kW/2 HP Motor speed: 2800 rpm Operating pressure: 6/8 bar Air consumption: 10 liters per cycle Extraction nozzle diameter: 80 mm Power supply: 380 V Overall dimensions: Width: 1070 mm Depth: 1035 mm Height: 1505 mm Net weight: 366 kg Giedjya Dfvjpfx Amuet

Condition: excellent (used), Year of construction: 2002, For sale are 2 air cannons for silo loosening. Manufacturer: Martin Engineering Capacity: 50 liters Operating pressure: 8 bar Year of manufacture: 2002 1 piece Capacity: 25 liters Gedpfx Amoh A H Thjujit Operating pressure: 10 bar Year of construction: 2011

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Gjdpfexcal Aox Amusit

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Gedpfx Asxcalcsmuoit The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.