Used Hermle Uwf 1002 H for sale (56,309)

Condition: new, Year of construction: 2023, Pipe drilling / angle drilling machine, drilling automaton TDM100 2D AT - automatic, with two opposing drilling units - Minimum quantity lubrication - Manual material clamping - Automatic feed and automatic pipe rotation - Max. pipe length 3,000 mm - Positioning accuracy +/- 0.2 mm - Drilling unit power 2 x 2.2 kW - Manual loading and unloading of material - Drilling heads swivel +/- 50° - Manual 360-degree swivel device - Motor speed 295 - 2950 RPM - Operation via touch panel - 100 positions programmable - Drilling unit lighting - Integrated tool cabinet - Round pipe up to 114 mm - Square up to 100 x 100 mm Nsdjlgzytspfx Abyodc - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Reaming drilling up to M12 - Holes up to Ø 50 mm

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Ndedeiuznuspfx Abyec Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO, type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical travel via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw drive Guide type: ball bearing guide, size 20 Payload: 60 kg Maximum speed of ball screw spindle: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Current consumption: max. 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide slide - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Nedpfx Aogf Ix Ajbyedc Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition A virtually identical linear unit is available under storage number 59702.

Condition: like new (used), 300 linear meters of Nedcon pallet racking New, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height: 6.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam capacity/bay: 3050 kg Negotiable price: €50,280.00 net ex warehouse Offer includes: + 108 pcs. pre-assembled frames, depth 110 cm, height 6.5 m + 642 pcs. beams, length 2.7 m, 3050 kg capacity/bay + 1284 pcs. safety locking devices + 216 pcs. concrete anchors Load capacity labels, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames: blue RAL 5019, infill panels: galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tons, higher bay loads available upon request. Beams: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly are available upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. We always have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top used & new storage technology & heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). Ndodpfxefi U Afs Abyoc ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service approach with our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking/heavy-duty racking systems, we guarantee the best conditions. Contact us for a non-binding offer!

Year of construction: 1995, condition: excellent (used), 2 Sulzer MB 80-230/3 centrifugal pumps Flow rate: 79-89 m³/h Head: 240-230 m Ndjdpfx Abed Sybueyjc Max. temperature: 130°C Seal: Mechanical seal with seal water connection Drive power: Siemens 90 kW Speed: 2980 rpm ! Price per unit !

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Nodpod Ev Upsfx Abyodc Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: used, operating hours: 48,000 h, Manufacturer: Alup Motor: 22 kW Njdpfx Abjur N Tbeyodc Output: 3.9 m3/min Loaded operating hours: 48,000 h

Condition: reconditioned (used), Year of construction: 2005, Connecting container 30-32 m³ capacity, suitable for use with screw conveyors on the right or left side. Nsdpfxjgypd Ho Abyodc Used, fully functional connecting containers from €4,000, depending on condition, VAT exclusive. Delivery possible.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally! Ndedpfxez Rmk To Abyjc

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Ndodpfx Aoz S Nwfebyjc Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,035 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Ndjdjz R D A Hepfx Abyec Manufacturer: Linde Type: H20/600D EVO Year of manufacture: 2019 Operating hours: 7,035 h Drive type: Diesel Lifting Equipment Mast type: Duplex mast Lifting height: 4,250 mm Free lift: No Free-lift mast: Without central hydraulic cylinder Tilt angle indicator: Present Load capacity and forks Load capacity: 2,000 kg Fork length: 1,200 mm Side shifter: Present 3rd hydraulic valve: Present 4th auxiliary hydraulic valve: Present, free for fork positioner Hydraulically adjustable forks: No MACHINE DETAILS Dimensions and weight Overall length: 4,100 mm Overall width: 1,200 mm Overall height: 2,777 mm Dead weight: 3,740 kg Maintenance and inspection Next service due in: 878 h UVV valid until: 03/2027 EQUIPMENT Full cabin Heater Windshield wiper Road traffic lighting with turn signals LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Lumbar support Seat heating Formerly a Linde full-service machine All dimensions are approximate. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 216

Condition: used, operating hours: 15,230 h, lifting height: 7,000 mm, fuel type: gas, mast type: duplex, total height: 4,100 mm, total length: 3,450 mm, total width: 2,230 mm, color: red, Year of manufacture: 2021 Empty weight: 13.050 kg Lifting capacity: 8.000 kg - Year: 2021 - Documentation available: Yes Ndodozwux Tjpfx Abyec - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: H2X396Y00749 - Operating hours: 15230 - Lifting capacity: 8000kg - Lifting height: 7000mm - Overhead clearance: 4220mm - Free lift: 0mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: License Plate, Heating, Joystick, Full cabin, Work lights - Mast: Duplex - Inspection valid until: 09-2026 - Drive: LPG - Motor brand: Linde - Transport dimensions: 3450mm x 2232mm x 4100mm (l x w x h) - Transport weight [kg]: 13050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 10,307 km, first registration: 06/2008, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 3,300 mm, fuel: diesel, color: white, gearing type: automatic, suspension: steel, Suspension: leaf suspension Front tyre size: 295/80R22,5 Rear tyre size: 295/60R22,5 Drive: Wheel Engine capacity: 7.150 cc Empty weight: 9.300 kg Carrying capacity: 35.200 kg Ndjdpfx Abez Ahtzeyec GVW: 44.500 kg

Condition: used, operating hours: 14,144 h, lifting height: 5,880 mm, fuel type: diesel, mast type: duplex, fork length: 1,500 mm, fork width: 1,750 mm, total height: 4,100 mm, total length: 3,300 mm, total width: 2,230 mm, color: red, Year of manufacture: 2019 Empty weight: 13.050 kg Lifting capacity: 8.000 kg Price: On request - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X396V01548 - Operating hours: 14144 - Lifting capacity: 8000kg - Lifting height: 5878mm - Overhead clearance: 4100mm - Fork length: 1500mm - Maximum fork width: 1750mm - Minimum fork width: 400mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: License Plate, Work lights, Heating, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Deutz - Transport dimensions: 3300mm x 2232mm x 4100mm (l x w x h) - Transport weight [kg]: 13050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nsdpfszta Huex Abyedc Koen van Lent

Condition: used, operating hours: 13,800 h, lifting height: 4,430 mm, fuel type: diesel, mast type: duplex, fork length: 1,000 mm, fork width: 1,140 mm, total height: 3,010 mm, total length: 3,050 mm, total width: 1,190 mm, color: red, Year of manufacture: 2007 Empty weight: 6.815 kg Lifting capacity: 5.000 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394U03600 Ndedsy Exnwopfx Abyjc - Operating hours: 13800 - Lifting capacity: 5000kg - Lifting height: 4430mm - Overhead clearance: 3000mm - Free lift: 0mm - Fork length: 1000mm - Maximum fork width: 1140mm - Minimum fork width: 260mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin, Joystick - Mast: Duplex - Drive: Diesel - Motor brand: Linde ? - Transport dimensions: 3050mm x 1190mm x 3010mm (l x w x h) - Transport weight [kg]: 6815kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2000, functionality: fully functional, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 Nsdpfxjg Akgtj Abyodc +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), mileage: 32 km, power: 118 kW (160.44 HP), first registration: 01/2026, fuel type: diesel, wheelbase: 4,100 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,150 mm, loading space width: 2,140 mm, loading space height: 2,080 mm, Equipment: Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, power assisted steering, tail-lift, traction control, = Additional options and accessories = - Rear-view camera - Multimedia system - Disc brakes = Special features = Njdpezc Nnzsfx Abyodc ZCFCE35B005714409 = More information = General information Year of construction: 2026 Technical information Number of cylinders: 4 Engine capacity: 2,998 cc Weights Unladen weight: 2,680 kg Payload: 820 kg GVW: 3,500 kg Condition Technical condition: very good Optical condition: very good Other information External length of cargo area: 415 cm External width of cargo area: 214 cm External height of cargo area: 208 cm

Condition: good (used), mileage: 7,049 km, power: 70 kW (95.17 HP), first registration: 08/2024, fuel type: electric, tire size: 225/55R17, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 3, total length: 5,370 mm, total width: 1,900 mm, total height: 1,910 mm, loading space length: 2,500 mm, loading space width: 1,670 mm, loading space height: 1,320 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Partition = Notes = Configuration: 4x2, Unladen weight: 2439 kg, Gross vehicle weight: 3200 kg, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking heater, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Seat heating, Bluetooth, Engine power: 70 kW (94 Hp), Fuel: electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Side wall paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Leather, Seat adjustment: Manual, L3 XL 280KM WLTP Snelladen 60kWh Carplay 3-seat/Empty seat, Seat heating, Rear doors!, Spare wheel, Tire type: Summer tires = Additional Information = Ndsdpfx Abo Adqdpoyec General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,439 kg Payload: 761 kg GVW: 3,200 kg Functional Loading area height: 57 cm Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €432 per month (delivery van, 72 months); Please inquire for more information and conditions.

Year of construction: 2019, condition: like new (used), Dry air system M + H SOMOS (art.2200) Ndedpogl A Snjfx Abyoc M + H Somos dry air dryer RDT 250, NEW CONDITION Bj. 2019 Price: € 12.500 Contact : Mr. Rainer Eckerle

Condition: excellent (used), functionality: fully functional, dust, chip extraction fan 18.5kw 8700m3/h 4940Pa Nsdpfx Aohu Aw Hebyjdc centrifugal fan. manufacturer: Klima Celje air flow:8700m3/h pressure:4940Pa motor power:18.5Kw 400v 50Hz speed: 2930 impeller diameter:700mm suction opening:250mm pressure side chimney:440 mm overall dimensions:800x1200x1500mm weight:ca 375kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1978, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Ndedpfxer Igtkj Abyjc Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Year of construction: 2001, condition: excellent (used), Used steam boilers Manufacturer: LOOS Type: U-HD Year of manufacture: 2001 Steam output: 350 kg/h Ndedpeizz U Defx Abyjc Operating pressure: 13 bar Burners available in various designs. Мы говорим по-русски! Please arrange inspections by phone only. Preferential sale to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading possible.

Year of construction: 1992, condition: good (used), H Bret press Type: PPH 30 Capacity: 30 T Bed: 345 x 1345 mm Nsdoiuc Nwspfx Abyjdc Year: 1992 Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Turn over to pressbrake possible!

Condition: excellent (used), RL40/1B. ZM Oil flow rate 230 kg/h. Njdeig Tw Tspfx Abyedc

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Nedpfxjcvkale Abysdc Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.