Used Galen Sb70 Breaker for sale (946)

Condition: new, Year of construction: 2023, functionality: fully functional, power: 12 kW (16.32 HP), Manufacturer: CGM Sound pressure level at 7m dB(A): 72 Maximum power, 3-phase: 15.0 kVA / 12.0 kW Maximum power, 1-phase: 13.8 kVA / 11.0 kW Voltage: 400 Volts, switchable to 230 Volts Frequency: 50 Hz Gasoline engine: CGM OHV 720 Ksdsz Stcropfx Ablenc Emission stage: STAGE V Cooling system: Air-cooled Cylinders: 2 Displacement: 713 cm³ Speed: 3000 rpm Electric start Battery: 12 V (Not covered by warranty) Fuel consumption at 3/4 load L/hour: 4.9 Generator: AVR regulation With brushes Ability to handle unbalanced loads: max. 25% phase-specific overload Circuit breaker Emergency stop switch Operating hour counter Frequency/voltmeter Wheel set with folding handle Sockets: 1 x 32 A - 400 V/5-pin 2 x 32 A - 230 V/3-pin 12V DC socket Dimensions and weight: Length: 870 mm Width: 588 mm Height: 726 mm Weight, dry: 184 kg Tank capacity: 40 l

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Kodpez D Ihfjfx Ablonc

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Construction: * Flatbed with aluminum sideboards, * Dimensions: approx. 6,280 mm x 2,480 mm x 490 mm, * Raised front panel, * Storage compartment, * Recessed strips in the flatbed floor, Crane: Fassi F 660 AXP.25 loading crane from 2007, * Remote control, * 4-point outrigger system, Crane reach/lifting capacity: Hydraulic: * 3.40 m = 16,000 kg * 4.30 m = 13,095 kg * 5.95 m = 9,500 kg * 7.70 m = 6,980 kg * 9.65 m = 5,440 kg Kodpfx Abewpbgqoljnc * 11.70 m = 4,375 kg * 13.85 m = 3,640 kg * 16.10 m = 3,100 kg Equipment: Cab: L (long), * Telligent transmission with clutch pedal, * Air conditioning + auxiliary air conditioning, * Auxiliary heater, * Additional thermal insulation, * Air horns on the cab roof, * Fuel tank: 590 liters, aluminum, * Driver/passenger seat: comfort suspension seat incl. horizontal suspension, * Sun visor, Technology: Audio system: Radio Truckline CD 70, * Hands-free telephone system, * Multifunctional steering wheel, * Electrically adjustable and heated exterior mirrors, * Central locking with remote control, * Cruise control, * CB radio, * Extendable cooler box, * Acoustic reversing warning (external warning signal), * Circuit breaker, * Rotating beacon, left/right, Safety & Environment: Retarder Voith, * Telligent braking system with ABS+ASR, * Differential lock, rear axle, * Emission standard EURO 5, Other: German initial registration, * 1 previous owner, 1 driver * Axle configuration: 6x4 + hydraulically steered trailing axle, * Engine 16.0 liters - 375 kW V8 diesel (OM 502 LA), * Wheelbase 4500 mm, * Payload 6,675 kg according to ZLB (Central Register of Road Vehicles) * Permissible total weight 32.0 t Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV (Technical Inspection Association) inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Construction: * Flatbed with aluminum side boards, * Dimensions i.L. 6,280mm x 2,480mm x 490mm, * Raised front wall, * Storage box, Knedpfszlvnfjx Abljc * Anchor rails in the flatbed floor, Crane: Fassi F 660 AXP.25 loading crane from 2007, * Radio remote control, * 4-point outrigger system, Crane reach/lifting capacity: Hydraulic: 3.40 m = 16,000 kg * 4.30 m = 13,095 kg * 5.95 m = 9,500 kg * 7.70 m = 6,980 kg * 9.65 m = 5,440 kg * 11.70 m = 4,375 kg * 13.85 m = 3,640 kg * 16.10 m = 3,100 kg Equipment: Cab: L (long), * Telligent transmission with clutch pedal, * Air conditioning + auxiliary air conditioning, * Auxiliary heater, * Additional thermal insulation, * Air horns on the cab roof, * Fuel tank: 590 liters, aluminum, * Driver/co-driver seat, sprung comfort seat including horizontal suspension, * Sun visor, Technology: Audio system: Radio Truckline CD 70, * Hands-free telephone system, * Multifunction steering wheel, * Electrically adjustable and heated exterior mirrors, * Central locking with remote control, * Cruise control, * CB radio, * Extendable cooler box, * Acoustic reversing warning (external warning signal), * Circuit breaker, * Rotating beacon, left/right, Safety & Environment: Retarder Voith, * Telligent braking system with ABS+ASR, * Differential lock, rear axle, * Emission standard EURO 5, Other: German initial registration, * 1 previous owner, 1 driver * Axle configuration: 6x4 + hydraulically steered rear axle, * Engine 16.0 L - 375 kW V8 diesel (OM 502 LA), * Wheelbase 4500 mm, * Payload 6,675 kg according to ZLB * Permissible total weight 32.0 t Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim at the Bremen motorway junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to create an individual offer for you! We are interested in taking your commercial vehicle/construction machine in trade. If a new TÜV (German vehicle inspection) is desired, we will be happy to provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: new, mileage: 40 km, power: 184 kW (250.17 HP), fuel type: diesel, empty load weight: 5,200 kg, maximum load weight: 6,790 kg, overall weight: 11,990 kg, tire size: 265/70R17,5, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 6,240 mm, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, - Vehicle currently has an estimated delivery time of 3-4 months. - MAN 12.250 = 124830, 6-cylinder engine - PowerMatic transmission - Differential lock - 3 seats (middle seat, folding backrest, 2-point seatbelt) - Engine brake with cruise control - Hill start assist (MAN EasyStart) - Auxiliary drive with automatic lowering function and engine speed increase - Control panel on driver's door (auxiliary drive, tipping operation, hazard warning lights) MAN EasyControl - Tires: Continental 245/70/17.5 - Driver's comfort seat with seat heating - Central locking with remote control - Radio with hands-free function and Bluetooth - Sun visor - Rear lights - Rear window - Circuit breakers instead of fuses - Fog lights - Trailer hitch, drawbar coupling with air connection, plus ball hitch coupling, 3500 kg - Various containers, mesh boxes, etc. available as optional extras - Rotating beacon optional Including GSR (General Safety Regulation): - Tire pressure monitoring system - Tire pressure and temperature control - Tire pressure display for the trailer - Blind spot assistant - Turning assistant - Protection of the vehicle against cyber attacks - Reversing assistant - Reversing Motion System (rear view camera) Kjdpfx Aboy Um Nbslenc - Intelligent speed assistant - Traffic sign recognition - Front detection (cannot be deactivated) - Warning system for driver fatigue and reduced attention - Collision warning system for pedestrians and cyclists - Emergency braking signal, automatic hazard warning lights - Professional instrument cluster - Smartphone integration (CarPlay) Warranty for the entire vehicle: = 2 years up to a maximum of 100,000 km Warranty for the powertrain (engine, transmission, drive axle): = 4 years up to a maximum of 240,000 km - Roll-off tipper body for city containers according to DIN 30722-3, container length approximately 4m. - Lifting/tipping capacity 8000kg - Permissible total weight: 11990kg, unladen weight: 5200kg, payload: 6790kg - Hook height 900mm (City DIN 30722) - Mechanical hook lock - Hydraulic pivoting arm - Hydraulic container locking - Cable remote control, emergency operation on the unit with levers - Emergency stop function - CE certificate and kit box - Paint finish: roll-off tipper body black RAL 9005, rollers yellow RAL 1018 - Subject to errors and prior sale! - More information, additional XXL - Pictures, directions, on our website: - For inquiries in English, please call ... - Air conditioning, automatic, front seat heating, VAT can be shown separately, ASR, ABS, sunroof, multifunction steering wheel, radio, telephone with hands-free system, on-board computer, cruise control, heated mirrors, electric front windows, electric door locks, central locking with remote control, trailer coupling, fog lights, power steering, differential lock, outside temperature gauge, tinted glass, electrically adjustable mirrors, tachograph, cab: short cab, air-suspended cab, air-suspended driver's seat, electric windows, seat heating, work lights, auxiliary drive, tipping hydraulics, new, emission class: Euro 6, diesel, rear-wheel drive, HSN 1516, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rentable, particulate filter badge: 4 - Green, hands-free system

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: AB/129942, F410 SURFACER Surfacing width: 410 mm Total table length: 2600 mm Table height: 855 mm Infeed table length: 1450 mm Adjustable aluminum fence, up to 45° Fence dimensions: 1100 x 170 mm 4-knife cutterblock, diameter: 120 mm Cutterblock rotation speed: 5000 rpm Motor power: 4 kW SCM surfacing guard integrated into the machine frame Dust extraction port diameter: 120 mm Manual star-delta switch Motor circuit breaker, undervoltage release Kjdpfozadchsx Ablenc Main switch, lockable Automatic motor brake Adjustable auxiliary fence Available in ARDENNES

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Main components • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. • Programmable automatic positioning. • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. Knodjzvc Dujpfx Ablec • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame Knsdpoy Ri Huefx Abloc - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: good (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RH2131-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece Kodpfx Ajydk N Noblsnc -Dimensions: 60/45/H120 mm -Weight: 0.3 kg/pc.

Condition: used, mileage: 106,865 km, power: 175 kW (237.93 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, total width: 25,500 mm, total height: 37,500 mm, loading space length: 68,000 mm, loading space width: 23,000 mm, loading space height: 5,000 mm, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will be pleased to assist you (via telephone). Mercedes-Benz Atego 1324 L 4x2 glass-side flatbed with rear-mounted crane Knedeyfr S Iepfx Ablsc A1K Front axle, 5.3 t; A2P Rear axle, crown wheel 390, hypoid, 9.2 t; A2Y Rear axle, narrow version; A2Z Rear axle differential lock; A6B Axle ratio i = 4.778; B1B Electronic brake system with ABS and ASR; B1D Electronic air supply unit, medium; B1F Heating, electronic air supply unit; B2C Disc brakes on front axle, drum brakes on rear axle; B4A Condensation monitoring for compressed air system; B5B Trailer brake, 2-line; C3D Wheelbase 5,360 mm; C5I Mounting parts for flatbed; C6B Steering ZF 8095; C6Y Stabilizer under frame, rear axle; C7H Side guard; C8J Spray protection integrated in mudguard; C9P Chassis overhang extended, 600 mm; D1C Driver air-suspension seat, comfort; D1M Passenger fixed seat, standard; D2V Armrests on both sides, driver's seat; D3Q Seat cover velour; D4B Classic cockpit; D4W Electric window lifters on both sides; D4Y Side sun roller blind, driver's side; D5Y Rubber mats, driver and passenger side; D6F Air conditioning; D6Y Pollen filter; D7L Overhead storage above windscreen, single compartment; D7Q High console storage on engine tunnel; D7W Storage behind base box; D8A Roof hatch/vent; E0Y Battery cover; E2J Circuit breakers; E3W PSM 2nd generation; E4C Additional functions for bodybuilder; E5A Switch No. 1 for external body electrics; E6A Trailer socket 24V, 15-pin; E6Y Reverse warning system combined with hazard lights; E7F Cable remote control for air suspension; F1P S-cab; F1X S-cab ClassicSpace, 2.30 m, with tunnel; F2U ClassicSpace; F4I Cab rear wall with window; F6C Tinted windscreen; F6I Heated front mirror; F6J Main mirror, electric, driver side; F7V Cab access, two steps; F8E Locking system with central locking; F8F Comfort locking system; F8V Light sensor; F8W Rain sensor; G0K Drive mode economy/power; G1D Transmission G 90-6/6.70-0.73; G5G Mercedes PowerShift 3; I1C Tubeless tires 10 R 22.5 front axle; I4A Axle configuration 4x2; I5X 13.5-tonner; I6A Flatbed chassis; I6X Rear axle air suspension; J1A Combination instrument 10.4 cm; J1O Digital tachograph, 2nd generation, ADR; J1S Tachograph manufacturer VDO; J2K Speakers, 2-way system; J3N Fleetboard Eco Support; J3V Truck Data Center 7; J5S Radio with USB port and Bluetooth; J8Y Preparation for Truck Data Center 7; J9D Pre-installation for toll collection; J9K Universal preparation for multimedia use; JKUR AdBlue tank relocated to right; JKVJ Main fuel tank relocated from left to right; K0G Plastic tank 180 l, left; K3S AdBlue tank 35 l; K5M Lockable tanks; K5Q Strainer for fuel filler neck; K5S Protective cap for AdBlue dosing system; K7L Exhaust system, tailpipe towards center of road; L0A Lighting requirements according to UN-R 48.06; L0Y Rear light cable set, extended; L1C LED daytime running lights; L1H Fog lamps, halogen; L1Y LED light package, front, with white indicator lenses; L1Z Indicator lenses, white; L2H Flashing side marker lights; L2P LED outline marker light; L3E 1 working light, upper rear panel; M0Q Noise regulations according to UN-R 51.03 Level 2; M2A Engine OM936, R6, 7.7 l, 175 kW (238 HP), 1000 Nm; M4X Engine version Euro VI, E; M5V High performance engine brake; N0S NA MB 60-2c, MPA low, nominal speed; N6K Transmission lock for PTO; O1X CLCS TL function integration in ASAM; O2L GU vehicle with...

Condition: good (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector -Manufacturer: wöhner, fuse-switch disconnector, load break switch 250 A -Type: LTS-1 -Quantity: 1x load break switch available -Overall dimensions: 185/160/H355 mm Knedpeyf Dy Rjfx Ablec -Weight: 3.1 kg

Condition: used, mileage: 175,000 km, power: 130 kW (176.75 HP), first registration: 12/2020, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a high-quality and reasonably priced vehicle with a verifiable service history from our company! Flatbed with stake pocket positions Tail lift BÄR 1,500 KG NAVIGATION Air conditioning Kjdpsvzd Uiofx Ablenc Rear axle with air suspension including raise/lower function Roof spoiler Differential lock Special features: Audio system: CD radio (Bluetooth, USB), battery 165 Ah, comfort cockpit, rear axle differential lock, aluminium air reservoirs, electric window lifters, tinted windscreen, urea tank (AdBlue): 35 l, LED light package, roof air deflector (adjustable, without base trim), reinforced engine brake, spare wheel, side-mounted spare wheel holder, acoustic reverse warning (external sound), tail lift switch, circuit breaker, cab seats: driver's seat with armrest, pneumatic driver's comfort swing seat, side window sunblind driver’s door, 12V / 15A socket in dashboard, Truck Data Center 6 (fleet management system), side underrun protection, multimedia device preparation, Truck Data Center (fleet management system) preparation Further equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 5.3 t, approach/front mirror, exhaust outlet towards vehicle centre, left electric adjustable exterior mirror, low pressure air unit, two-step entry, driver assistance system: Active Brake Assist, driver assistance system: lane keeping assist, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf/air, front suspension 4.4 t, generator 100A, 6-speed gearbox - type: G 71-6, manual roof lift (steel), rear axle crown wheel 390, info display 10.4 cm with additional indicator, chassis/body: chassis, fuel tank: 120 l, light and rain sensor, heated air dryer, engine 5.1 l - 130 kW diesel (OM 934), engine compartment encapsulation, wheelbase 4760 mm, disc brakes front and rear axle, seat covers/upholstery: fabric, cab passenger seat: fixed single seat, rear mudguard splash protection, rear axle stabilizer, cab control type, tachograph/EC control unit, fixed rear underrun protection, front underrun protection, toll recording preparation, immobilizer, permitted gross weight 11.99 t GERMAN VEHICLE REGISTRATION / EXPORT SERVICE We organize your registration and export documents / EUR 1 and manufacturer’s statement for export. FINANCING Upon request, we are happy to offer you a LEASE-PURCHASE or FINANCING ARRANGEMENT. SERVICE TÜV roadworthiness inspection / UVV lift gate check / LGS testing / tachograph inspection / OBU device installation and service by our AUTHORIZED WORKSHOP possible upon request. TOLL / ROAD CHARGES Toll booking available on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale is subject to our general terms and conditions. The information provided online is a non-binding description and does not constitute guaranteed specifications. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, Advanced Semiconductor Materials Lithograph Holding N.V. Interface Module YieldStar S-200B, 4022 636 68175, MSMR TM Model: 402263668175 Type: MSMRTM Condition: Used Ksdpox I Ak Isfx Ablsnc General Information: Central electronic interface for the MSMR measuring system of an ASML Yieldstar S-200B Rugged industrial enclosure in pull-out/rackmount design Distribution of voltages (e.g., 24 V, 13 V) Protection and safeguarding via multiple circuit breakers (F1…F5) Connection to measuring and control components via X-ports Interface to I/O, sensor systems, thermal control, and fan-filter units

Condition: good (used), functionality: fully functional, Equipment: lighting, Hall office / supervisor office WSM W10, 3 x 2 m with electrical wiring and LAN Hall office / supervisor office WSM W10 – modular room system for indoor installation, 3 x 2 m, fully equipped with electrical wiring and network connections. Used hall office from the renowned manufacturer WSM (Walter Solbach Metallbau), ready for operation. Suitable as a supervisor office, storage office, workshop office, or control center in production and storage halls. Technical data: - External dimensions: 3,045 x 2,045 mm - Height: 2,680 mm, clear height 2,500 mm - Floor area: approx. 6.2 m² - Design: indoor installation (room-in-room), with floor - Steel structure with crane lifting points, can be moved as a complete unit - Glazing on 2 sides (long side and end side) - 1 entrance door with ventilation grille Knedpfx Abjz Hftkelsc - Frame blue, wall panels white Electrical and network installation: - Power supply via CEE plug 32 A - Sub-distribution with circuit breakers - Several double sockets in the parapet channel - Network sockets RJ45 at the workstation, LAN cabling installed - Ceiling lighting Interior: - Permanently installed desk with solid wood top - Acoustic slat panels in wood look on the rear wall Condition: Used, fully functional. Interior in very good condition. Exterior shows signs of use, individual small dents in the lower wall panels. Floor shows signs of use. Comparable new price including electrical and network equipment: approx. €6,000 net. Scope of delivery: as shown in the pictures. Location and loading: - Location: 99428 Grammetal (Thuringia, near Weimar) - Loading onto a truck possible on site - Delivery and installation on request - Viewing by appointment Invoice: Sale by a specialist dealer with a proper invoice and VAT shown. Price net plus statutory VAT.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 34608, total width: 3,700 mm, total length: 7,200 mm, overall weight: 3,500 kg, input voltage: 400 V, input frequency: 50 Hz, Air cushion table with breaker bars – tiltable with support Breaker bars: 3x X 2x Y Ksdez D H A Iepfx Ablenc

Condition: new, Year of construction: 2026, Maximum chipping diameter 100 mm Drive system PTO shaft with shear bolt protection Power range 20 – 50 HP Number of blades 4 + 1 (counter-blade) Blade dimensions 210 x 60 x 9 mm Counter-blade dimensions 197 x 70 x 9 mm Flywheel weight 55 kg Feeding system Hydraulic Hopper dimensions 510 x 510 mm Kedpfsz I Srvsx Abljnc Discharge chute rotation range 360° Rotational speed 540 – 1000 rpm Weight 315 kg Shipping dimensions (L x W x H) 1140 x 920 x 1920 mm Reinforced construction – a stable, massive 610 mm diameter, 18 mm thick disc ensures high inertia and smooth operation without overloading the tractor engine. 4 cutting blades + 1 counter-blade – made of hardened tool steel and double-edged, ensuring long service life and precise cutting. Hydraulic feeding system – two hydraulically driven toothed rollers and 10-level feed speed adjustment allow the work pace to be adapted to the wood type; a reverse function facilitates material retraction. Independent hydraulic system – built-in hydraulic pump and oil tank; no need to connect to the tractor's hydraulics. Ejection paddle and breaker system – provides additional wood chip fragmentation and effective material discharge via a 360° rotating chute. Drive protection – a PTO shaft with a shear pin protects the system against overload. Bearings with grease nipples – resistant to dust and chips, and easy to service.

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations Kjdpfjzzp Ttjx Ablonc • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Ksdpfsz A Hhusx Ablenc

Condition: used, functionality: fully functional, machine/vehicle number: 34162, mileage: 2,900 km, power: 315 kW (428.28 HP), first registration: 07/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14.7 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), trailer hydraulic system, tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's comfort air suspension seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof beacon lights on the cab roof, sun visor Kedpfsz Hbvhjx Ablsnc Total volume approx. 14.7 m³, cylindrical steel tank with curved bottoms in a vacuum- and pressure-resistant design, for a maximum operating pressure of 0.5 bar, fixed water chamber in the piston back for approx. 1000 l of fresh water, piston chamber can be used as a water chamber, piston chamber residual drain relocated to the rear for water use, extension piston with 3 piston positions, water/sludge approx. 1.0 m³/12.7 m³; 3.0 m³/10.7 m³; 5.0 m³/8.7 m³, hydraulically fully opening bottom flap and pipe break protection according to UVV, locking of the bottom flap with a hydraulically adjustable lug locking system, seal between the sludge tank and the bottom flap with a profile rubber seal (NBR quality), discharge apron made of stainless steel, sludge chamber level indicator with an internal float and an external scale graduated in 500 l steps, water chamber and piston chamber level indicators each by means of a glass tube, upper and lower suction and discharge connections DN 100 at the bottom with a pneumatically operated shut-off valve, vacuum pump (water-cooled) GardnerDenver RFW 200 (1180 m³/h) hydraulically driven, high-pressure pump Pratissoli KE 30 H (approx. 70 l/min at 130 bar) stepless pressure control, small hydraulically driven HD hose reel at the rear right of the superstructure for max. 80 m HD hose DN 13, 60 m HD hose DN 13 with hose guide and spray gun (with swivel joint) are installed, 4x LED work spotlights right, 4x LED work spotlights left, 2x LED work spotlights rear, 1x LED work spotlight on the boom (1x rear and 2x right and left), 2x LED roof beacon lights on the superstructure, suction hose boxes on the right and left made of aluminum, lockable toolboxes made of stainless steel, waste container mounted at the rear left, galvanized, aluminum ladder 3 m long, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control, hose storage cassette for accommodating an 18 m long suction hose DN100, wall thickness 10 mm. Boom mounted on the side right of the tank cover, equipped with the fun

Condition: used, functionality: fully functional, machine/vehicle number: 33095, mileage: 79,900 km, power: 315 kW (428.28 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t tag axle, daytime running lights, rain sensor, light sensor, trailer hitch Rockinger (D40), trailer hydraulics, tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with central locking, multi-function steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection system, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Kjdpfxjz E Rh Do Ablenc Total volume 15 m³, usable volume consisting of approximately 800 l fresh water tank and approximately 13 m³ sludge tank, tank wall thickness 6 mm, tank emptying via free outlet or by pressing with the vacuum pump, bottom flap over the entire cross-section hydraulically opens upwards, mechanical swivel locks, sealing of the closing base in NBR, one baffle plate in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide valve, level indicator sludge tank with float and external scale (division of 500 L), sight glass for water tank, outlet apron made of stainless steel, vacuum pump GardnerDenver RFW 200 (1250 m³/h) hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulic HD hose reel with approximately 40 m HD hose DN 13 and spray gun (with swivel joint), suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left side galvanized, lockable tool box on the right, ladder, control panel made of stainless steel LED-illuminated and lockable mounted on the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/pressure, transport hose reel up/down, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, transport hose reel hydraulically driven galvanized with approximately 40 m suction hose in DN 80, speed for rolling up/down can be adjusted continuously, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics.

Condition: new, functionality: fully functional, Year of construction: 2013, The part number 0685763C (often listed as 685763) corresponds to the Merlin Gerin MCH-M Spring Charging Motor Mechanism. This industrial electrical operator is designed specifically to automate the charging of stored-energy springs within heavy-duty circuit breakers. Core Technical Specifications Parameter Specification Details Manufacturer Merlin Gerin (Legacy brand of Schneider Electric) Model Type / Component MCH-M Gear Motor / Electric Operator (Spring Charging Motor) Catalog / Part Number 685763 (Variant suffix C denotes technical revision level) Knedpfez Ezv Sjx Abljc Rated Control Voltage (U s) 200/240 V AC (at 50/60 Hz) or 200/240 V DC Power Consumption 180 VA Built-in Limit Switch Rating 10 A at 240 V AC (Integrated limit switch/spring charged switch) Technical Level No. 01 Net Weight Approx. 1.78 kg to 1.97 kg (3.92 lbs to 4.34 lbs) System Compatibility This motor mechanism is specifically designed as a plug-in breaker accessory for legacy, high-amperage Schneider Electric / Merlin Gerin Air Circuit Breakers (ACB) and Insulated Case Circuit Breakers (ICCB): Masterpact M series frames (M08 through M63) Masterpact MP series frames Masterpact MC series frames Functional Description The MCH-M mechanism acts as a motorized remote control interface. When electrical power is applied to the circuit, the motor runs automatically to compress the high-tension closing springs inside the Masterpact breaker. Once fully compressed, the integrated 10A Spring Charged Switch trips mechanically. This cuts power to the motor and readies the breaker mechanism for an instantaneous remote close or automated system reclosure command.

Condition: used, mileage: 303,400 km, power: 132 kW (179.47 HP), first registration: 04/2021, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 04/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 5,100 mm, loading space width: 2,470 mm, loading space height: 1,900 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, navigation system, tail-lift, * Special equipment: * Lightweight box body * LBW (loading platform lift) from BÄR, 1000 kg, aluminum, with roll-over protection * Turning camera * Rear-view camera * Navigation system * Aluminum rims * Rear axle differential lock * Hill start assist * Lane keeping assist * Emergency braking assist * Air conditioning * Cruise control * Electric windows and mirrors * Wheelbase 3620 mm * Airbag (driver's side) * Audio system: CD radio (Bluetooth, USB) * Battery 165 Ah * Cockpit comfort package * Air reservoir, aluminum * Cab: Silver interior trim * Suspension: Front springs 3.6 t * Tinted windshield * Transmission: 6-speed - Type: G 70-6 * Power Shift transmission Ksdpfjz Iurfox Ablonc * Rear lights: LED * Interior filter: Activated carbon filter * Fuel filter: Heated * Lighting package: LED * Vehicle outline lights: LED * Turn signals, side, white * Alloy wheels 6.75x17.5 (ALCOA matte) * Engine brake: Enhanced * High-Performance Engine Brake * Engine compartment encapsulation: Enhanced * Frame overhang: Extended * Reversing warning: Acoustic (external warning signal) * Switch: Tail lift * Circuit breaker * Seats in the cab: Driver's seat armrest * Seats in the cab: Driver's seat, comfort suspension seat * Sun visor: Exterior * Sunshade: Side window, driver's door * Stabilizer: Rear axle, enhanced (for extremely high loads) * Socket: 12V / 15 A in the dashboard * Preparation for multimedia devices * Preparation for Truck Data Center (fleet management system) * Additional thermal insulation Further equipment: * Emission standard: EURO 6D * Axle configuration: 4x2 * Axle load: Front axle 4.1 t * Approach/front mirrors * Exhaust pipe: Centered * Exterior mirrors: Electrically adjustable, left * Cab: S ClassicSpace * Cab: ClassicSpace * Suspension: Leaf spring / air suspension * Generator: 100 A * Urea tank (AdBlue): 25 L * Lifting roof: Manual (steel) * Rear axle: Crown wheel 325 * Info display: 10.4 cm with additional display * Fuel tank: 120 L * Light and rain sensor * Air dryer: Heated * Engine: 5.1 L - 130 kW Diesel (OM 934) * Disc brakes: Front and rear axle * Preparation for toll collection * Immobilizer * Permissible total weight: 7.49 t * and more * Subject to errors, changes, and prior sale.

Condition: used, mileage: 427,670 km, power: 335 kW (455.47 HP), first registration: 01/2023, fuel type: diesel, maximum load weight: 16,110 kg, overall weight: 26,000 kg, tire size: 315/70 R 22.5, axle configuration: 6x2, color: white, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Stream Space cab, 2.5 m flat floor, front axle, 8T with air suspension, wheelbase 4900 mm, 630-liter aluminum fuel tank on the left, 60-liter AdBlue tank on the left, THIRD LIFTING AND STEERABLE AXLE, 7.5T, automatic transmission with 12 gears, MB PS3, high-performance engine brake, EURO VI with OBD-C, leather steering wheel, Komfort central locking, air conditioning, Webasto, luxury lower bunk, comfort pneumatic driver's seat, steel spring cab suspension, high roof, electric sunroof, hill start assist, reversing buzzer, ABA 4, driver airbag, Voith oil retarder, Attention Assist, fog lights, LED daytime running lights, turning lights, Bi-Xenon headlights, headlight washers, LED rear light clusters, anti-roll bar, ABS, ASR, ESP, EPB, twilight sensor, rain sensor, anti-skid system, lane keeping assist, turning assist, cruise control with distance radar and Sto & Go, launch assist, automatic circuit breakers, transmission oil cooling, towing hitch. Kodpfjz Nhxcex Abljnc

Condition: used, machine/vehicle number: 2020110210, mileage: 92,300 km, power: 100 kW (135.96 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 3,065 kg, maximum load weight: 435 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized, lightweight box bodies for new or used low-frame chassis in various body lengths. The body and interior fittings are always individually adapted to your specific needs, from function to design. We manufacture ourselves and in Germany. Our many years of experience and our comprehensive service offer you a great deal of flexibility in implementing your idea. Each project has its own ID with us. VW Crafter 2.0l 2011 Euro5 3500 kg First registration: 21.12.2011 Mileage: 92,300 km Fuel: Diesel kW/PS: 100/136 Manual transmission, 6 gears ccm: 1,968 cm³ Ksdjf D Rdtepfx Ablenc The sales body is NEW, unused and features a large sales flap across the entire vehicle width, 2 seats, driver's license class B, rear step, LED lights, reversing camera. Box body made of 25 mm GRP sandwich panels, superlight, with an alcove. Rear door, single-leaf, 700 x 2000 mm. Floor made of non-slip industrial flooring R11. Exterior lighting: LED, in accordance with the Road Traffic Act and EU regulations. Interior dimensions LWH: 3800 x 2250 x 2300 mm Side flap WxH: 3570 x 1480 mm Permissible total weight: 3,500 kg Unladen weight: 3,065 kg Interior fittings are NEW!! Left side: Commercial refrigerator with glass door and forced air cooling Base cabinet for countertop appliances with sliding door, 2-burner gas stove 8.5 kW, smooth gas griddle 8 kW, double gas fryer 2 x 8 L 12.5 kW, electric bain-marie 2 kW, wall-mounted hood 2200 incl. extraction, grease drain, flame protection filter, heat protection panel and lighting, gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas line and gas inspection. Right side: Serving table with sliding doors and stainless steel worktop, cash register station 900 with folding cover, 254 L double sink with storage including fresh and wastewater tank, boiler Chalkboard with wooden frame, LED illuminated Additional equipment: Storage space above the sales flap, folding bag storage at the sales opening. 2 LED panels on the ceiling and 3 LED spotlights above the sales counter, dimmable. Plenty of storage space. Standard electrical installation 380 volts/16A, connection socket according to CEE standard, RCD circuit breaker, 16 amp fuse with inspection, 5 double sockets, hygiene package, fire protection package. Price net: 63,920.00 € plus 19% VAT Errors and prior sale excepted.

Condition: used, mileage: 357,000 km, power: 290 kW (394.29 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,240 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, We're delighted that our offer has piqued your interest and can assure you that you'll be able to purchase a good, affordable vehicle with a proven service history from us! Certified KOKO swing-away body with rear load securing device Steering axle Engine brake Tow bar Forklift bracket Air conditioning Kedpfxsumgtuo Ablsnc Auxiliary heating Rear axle with air suspension and raising and lowering function Special equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), 220 Ah battery, compressed air connection in the cab, electrical system and lights for the swap body frame, Driver assistance system: Active Brake Assist, Suspension: 8.0 t front springs, 2-leaf, 3-piece fenders, Fuel tank: 500 L aluminum, Roof air deflector (lockable, without base panel), 2-cylinder air compressor, Reinforced engine brake, Steered trailing axle, Automatic circuit breaker, Seats in the cab: Driver's seat: Comfort suspension seat, 12V socket in the passenger footwell, 24V socket in the passenger footwell Additional auxiliary heating (water) Other features: Euro 6 emissions standard, 6x2 axle configuration, 2-wire trailer brake, left-hand connections, 24V/15-pin trailer socket, Antos, exhaust to the outside right, electric exterior mirrors. adjustable and heated, rear axle differential lock, steel compressed air tank, medium compressed air unit, driver assistance system: lane departure warning, cab: width 2.30 m, cab: hydraulic tilting device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: leaf / air, electric windows, tinted windshield, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 Ltr., manual lifting roof (steel), rear axle crown gear 440, info display 10.4 cm, body/structure: chassis, comfort locking system, fuel tank: 290 Ltr. aluminum, unregulated power steering pump, air intake from the front, engine 10.7 Ltr. - 290 kW R6 Diesel (OM 470), Enclosed engine compartment, single-tire trailing axle, 4900 mm wheelbase, ramp mirror, spare wheel, residual heat recovery, disc brakes on front and rear axles, fabric seat upholstery, cab seats: passenger seat, front splash guard, front axle stabilizer, additional stabilizer, rear axle/trailing axle, 24V cab socket, tachograph/EC control unit, aerodynamically shaped underbody paneling, front underride protection, toll collection preparation, offset front axle, regulated water pump, gross vehicle weight 25.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING We would be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING offer upon request. SERVICE TÜV-HU / UVV LBW / LGS INSPECTION / Odometer inspection / OBU device installation and service by our brand-name workshop on site TOLL / ROAD TOLS TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale subject to our terms and conditions. The information provided online is a non-binding description. It does not constitute guaranteed properties. The seller is not liable for typos or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.