Used Framag Kks 1250 for sale (1,770)

Condition: good (used), turning diameter over bed slide: 1,250 mm, turning length: 8,000 mm, workpiece weight (max.): 12,500 kg, DBC Turning Length: 8000mm Swing over bed Ø: 1280mm Swing over cross slide Ø:1000mm Length: 12500mm Width: 2100mm Height: 1800mm Weight: 35000kg Redpfowwtcmex Abpsw

Condition: good (used), RMF Vacuum Tumbler Redpfxenmyx Ee Abpow Capacity 1250 ltr Model MM2 - LD2 With Tote Bin Loader All stainless steel In excellent condition

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Rjdpfxjzdpvgo Abpsw Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Press force: 25 t Bending length: 1250 mm Distance between uprights: 1200 mm Control: Cybelec CybTouch 12 Stroke: 150 mm Installation height: 340 mm Rapid down speed: 220 mm/s Bending speed: 0-12 mm/s Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Dimensions: 1980 x 1170 x 2185 mm Standard equipment: Basic features: • CNC control Cybelec CybTouch 12 • 4 axes: Y1-Y2-X-R • Backgauge system model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • HAWE hydraulic system Redpoyz Sw Rofx Abpow • CE standard

Condition: used, functionality: fully functional, 🏗️ FOR SALE: ILMAR Rapide 1250 Block and Paving Machine (Used) Excellent opportunity to expand or modernize your precast concrete production with a domestically manufactured machine (ILMAR), recognized for its robustness, reliability, and low maintenance costs. The ILMAR Rapide 1250 is a fully automatic industrial unit, ideal for high-volume production of a wide range of products with premium finishes. 📊 Technical Specifications and Capabilities Production Versatility: Produces blocks (standard and hollow), paving stones, road kerbs, and decorative pieces. Adjustable Heights: Capable of producing pieces with heights ranging from 5 to 30 cm. Bi-Layer Option: Perfect for paving stones with differentiated color or texture finishes. High-Strength Structure: Designed to withstand demanding compaction and industrial vibration cycles. 🔍 Equipment Condition: Used, in the mechanical and visual condition visible in the photos. This robust equipment is ideal for those seeking high productivity with an initial investment significantly lower than that of a new machine. Rsdpfxezgv Iuj Abpjw

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. 🔧 Condition used (not overhauled) fully operational ready for testing inspection possible ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Rjdjyy Rcpspfx Abpew Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Machine weight: approx. 3600 kg 🧰 Equipment coolant system 24V lighting drilling table Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged

Condition: like new (used), functionality: fully functional, chuck outer diameter: 1,250 mm, 4-Jaw Lathe Chuck BISON Ø 1250 mm, A15 Mount – almost new For sale: 4-jaw independent lathe chuck from renowned manufacturer BISON, diameter 1250 mm. Rsdjy Exqxepfx Abpew Designed for heavy-duty industrial applications, suitable for large conventional and CNC lathes. Technical data: Manufacturer: BISON Type: 4-jaw independent chuck Diameter: 1250 mm Mounting: A15 taper Condition: almost new Description: High-quality lathe chuck ensuring precise clamping of large workpieces. Each jaw is independently adjustable – perfect for machining irregular shapes. Available from stock.

Year of construction: 2004, condition: used, High-performance band saw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roller diameter 1250 mm Roller width 150 mm Saw blade speed: 28-50 m/s Connected power: approx. 45 kW Feed rollers 2 x 4 Roller height 200 mm Cutting height up to the lower edge of the pressure guide: 400 mm and higher Cutting width 250 mm to the left of the saw blade and 250 mm to the right of the saw blade Rsdpjdfcv Iefx Abpsw with center cutting device complete technical documentation Original photos will follow

Condition: used, Year of construction: 2007, operating hours: 5,600 h, Empty weight: 21.450 kg Rjdpfsx R T N Tsx Abpsw Mast: articulated arm Please contact Emal Jaweed for more information

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: UL-S 1250 Output: 1,000 kg/h Permissible operating pressure: 13 bar Rsdpfx Abexnxflspew Increased test pressure: 24.7 bar Total water capacity approx.: 2,320 l Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner GL5/1-D/ZMD, separate control cabinet, feedwater pump, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 1997, 1 used steam boiler ----- Redpfx Aet E Rwnebpjw manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: excellent (used), Year of construction: 2003, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l Rodet E Rntopfx Abpow water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 Rjdpfx Absuugi Sepsw CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) Redpfey U Hkfsx Abpjw X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Year of construction: 2016, condition: used, KK PULLTESTER KKP03A / series 6 The KK pulltester is a measuring device for quality assurance in the graphic industry. It measures, with extremely high precision the bonding-adhesion of individual pages of cataloges, paperback books, journals, brochures and books. Redpswcd Iqofx Abpjw The number of pages to be measured, page numbers, order number and book block length are programmed before the measurements are taken. Technical specifications: Language: english book block format width: approx. 5 - 35 cm book block format length: approx. 7 - 40 cm book block format thickness: approx. 7 cm

Condition: used, mileage: 242,000 km, power: 162 kW (220.26 HP), first registration: 11/2014, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, tail-lift, short cab fully air-suspended differential lock air conditioning heated seats automatic transmission Brandt refrigerated body 2 compartments (partition wall 4,600 mm long) loading space on the right: 4,600 x 820 mm portal doors Rjdpfx Ajza Nlhobpjw side door 1,500 kg MBB Palfinger tail lift Carrier Supra 1,250 refrigeration unit Euro 6

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min Rsdpfx Aoyfnpisbpew

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale! Rsdpfey Tbtlox Abpsw

Condition: good (used), Year of construction: 2003, functionality: fully functional, saw blade diameter: 450 mm, Semi-automatic cold circular saw Make: Kaltenbach Model: KKS 450H Year of manufacture: 2003 Technical data: Manufacturer: Kaltenbach Model: KKS 450H Year: 2003 Saw blade diameter: 450 mm Mitre range: 180° rotary table Cutting capacity round: 150 mm Cutting capacity square: 140 mm Feed: hydraulic, infinitely adjustable Machine dimensions: L 1.10 x W 1.40 x H 2.0 m (plus roller conveyors) Weight: 1250 kg + roller conveyors Equipment: - Hydraulic retracting arm - Infeed roller conveyor, L = 6 m, with manual stop Redpfxeyibwfs Abpow - Outfeed roller conveyor, L = 1 m All information subject to change without notice. A demonstration can be arranged anytime in our showroom.

Condition: used, Year of construction: 1998, saw blade diameter 450 mm cutting diameter 150 mm capacity 90 degrees: flat 330 x 40 mm Rjdpfx Aev Hth Ajbpow capacity 45 degrees: round 140 mm capacity 45 degrees: flat 250 x 40 mm cutting speed 10 - 70 m/min saw head feed 0 - 1000 mm/min sawing motor 1,7 / 2,6 kW weight of the machine ca. 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mm

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,45 x 1,20 x 2,00 m Rjdov Hhrvspfx Abpow - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min Rjdpfx Abotqqrzepjw control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything can be configured according to your wishes, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Servo motor for back gauge & linear ball screw system (X-R) CNC crowning European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety guards with switches CE F. AKAS-LC II AKAS-3 M Motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear guard with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Central lubrication system Redpfjfirwmsx Abpsw Oil cooler Additional back gauge finger and additional adjustable support arms Special packaging for overseas transport _____ With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services relating to training and customer support. We would be happy to support you from Germany – from consulting, through purchase, and throughout the entire life cycle of your machine. With our German branch, we are always on site to provide quick and efficient support. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: used, Year of construction: 1995, saw blade diameter 400 mm cutting diameter 130 mm saw blade turning speeds 30 / 60 U/min capacity 90 degrees: square 120 mm total power requirement 4,8 kW weight of the machine ca. 1,8 t dimensions 1,4 x 1,2 x 2,3 m Redpfx Aboy Umcbopew Semi-automatic Cold Circular Saw - Miter cutting - Micro-spray lubrication system - Safety guard - Emergency stop device

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: approx. 1250/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 230 mm -Transport dimensions: 1250/960/H1140 mm -Weight: 138 kg Rjdpfexzzmrsx Abpjw