Used Fpt Industrie Sirio M40 for sale (26,426)

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A Dcedpfx Ajy D Hp Tom Reh • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO - Tungsten carbide saw blade Ø 300mm Dcedpof Nwxwjfx Am Rsh - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Dcedpfehyuglsx Am Rjh Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Dcodpjpl Tgmjfx Am Roh Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Year of construction: 2024, condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Machine in stock and ready for shipping Equipment: - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes Dcedpfx Aod Izq Hom Reh - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2024, condition: new, XX100329 CNC Machining Centre with 3 axes and worktable with pneumatic positioning at 0°/90°/180° FOM INDUSTRIE FMC 120 Machine in stock and ready for shipping Standard configuration: - Servo-ventilated three-phase spindle motor 3 kW, regulation of spindle rpm by numerical control - inverter (1000/17000 rpm) - 6 position tool-holder for manual change with pneumatic locking (ISO 30) - Pneumatic rotation of the work table 0° to 90° to 180° - Mobile control console with PC, 24'' - No.4 pneumatic vices with manual positioning and double pressure with safety valves - Manuallly adjustable profile reference stops on right and left of work table - Minimum quantity lubrication (MQL) with pure oil - Perimeter safety casing on 3 sides and retractable front door Dedpfx Amehlkqps Roch - FST CAM 4 program Optional equipment installed on the machine: - PR204851 5-position automatic tool magazine (ISO 30) - PR207680 4-vice Easy-to-Set configuration: • Transformation of standard vices into vices with automatic movement and pneumatic locking • 2 retractable pneumatic side stops • SW for vice positioning - PR-28965 Beam rotation stop for intermediate angles with manual adjustment - PR204833 External stop with tunnel - PR202971 Data import software for data in accordance to FOM protocol with wireless bar-code reader - PR-27602 Tool set for aluminium - QN-28849 ISO 30 cone with milling cutter Ø 75 mm thickness 6 mm for end milling

Condition: new, Year of construction: 2023, Corner crimping machine FOM INDUSTRIE BAIHA L Machine in stock - Max. profile height 200 mm - Hydro-pneumatic drive Dcodod E Eimjpfx Am Roh - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness - No. 2 fold-away profile fences

Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement Dcedpfxewh Rlgj Am Rsh - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop Dcedpfxjiv Imnj Am Roh - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Condition: excellent, as new Technical specifications and equipment installed on the machine (standard and options): - No.2 new FOM carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM Dcedpfxswk R A Dj Am Roh - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2017, condition: excellent (used), functionality: fully functional, FOM Industrie ARGO 70 3-axis CNC machining center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis top only: 6.780 mm Dsdpfolu E Nasx Am Roch X axis top + heads: 6.630 mm Y and Z axis for machining on top and rear side: 545 mm x 295 mm Y and Z axis for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180°. Rotational speed: max. 17.000 rpm profile width: max. 545 mm bar length: max. 6.780 mm Number of milling spindles for aluminum: 1 tool change places: 12 POSITIONING AND CLAMPING Clamping devices with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. Number of clamps: 8 MACHINE DETAILS main motor: 6,5 kW total power 8,3 kW speed axis X: 100 m/min EQUIPMENT - Multiple workpiece - Tool clamping system - pendulum operation - Minimum quantity lubrication - Chip discharge conveyor - Rigid tapping - Air cooling - Tool holder - Tool rest with 12 places at the head - Operator terminal with PC - 23" screen - 3D visualization for FomCam

Condition: used, machine/vehicle number: 580P090100, Wire feed unit for manual TIG welding TBi PenFeeder wire feed unit Wire feed speed Suitable wires Wire feed length Dcsdpfx Asx Ux Ezsm Roh Wire spool mount Dimensions Weight Power supply Control adjustable from 0.5–10 m/min 0.8–1.6 mm, all wire types TBi WirePen with 3 m length Mandrel diameter 50 mm for standard D300 wire spools and basket spool holders approx. 656 x 271 x 442 mm approx. 11 kg (without wire spool) 115~230 V AC, 50~60 Hz On/Off via TBi WirePen, selectable 2-stroke or 4-stroke operation Purpose The TBi PenFeeder helps make manual TIG welding more efficient and faster. The filler wire is available virtually endlessly at the touch of a button, eliminating welding pauses for repositioning or changing rods. Using filler material from a spool also saves costs. Even less experienced TIG welders can achieve good results quickly with this system.

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Dsdpfxskt Uuao Am Rsch Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"

Condition: used, functionality: unexamined, Ferwood Code: RU0008671 - Dimensions: 6500X1100X250 mm - Rollers L=600 mm - Condition: Used - Functionality: Not tested - Compatible machine: AUTOMATED LOADING AND UNLOADING HOMAG - BIESSE - SCM - IMA. If interested, we offer an overhauling service. Contact us. Dodev Hglzepfx Am Rsch

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external Djdpoyylikofx Am Roch   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Automatic edge banding machine for pre-glued edges Dedpfx Aowfw A Hjm Rjch

Condition: excellent (used), F.O.M. INDUSTRIE Double mitre saw Moxie M Year of manufacture 2011 TCT saw blades diameter 400 mm Usable length 4 m Weight 400 kg Cutting angle: Mitre adjustable from 45° outwards to 45° inwards; inclination from 45° outwards to 90°, including intermediate positions 2 TCT saw blades supplied Saw blade advance hydropneumatic Dcodpfjwuddcjx Am Roh Saw motors, three-phase current 2.2 kW Belt drive transmission to saw blade Cutting range between saw units 4000 mm Fixed saw unit and movable head with automatic positioning Pneumatic clamping device Operating pressure 7 bar

Condition: used, Herbot Industrie cucumber and carrot cutting machine Type 26 E: Industrial machine with high performance As-new PLC control with frequency converter Cutting width steplessly adjustable Approx. 250 spare blades available Ready for immediate use Dcedpfjwq Ipzsx Am Roh Price is net ex works Offer valid without guarantee of availability

Condition: used, Year of construction: 2014, In excellent condition, ready to use immediately Dodpfoywhd Esx Am Rech

Year of construction: 2003, operating hours: 6,215 h, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 150 mm WORKING AREA: 3000 x 1500 mm Dcjdsx Ruz Rjpfx Am Rjh SOURCE: CP 3500 ; 3500 W CONTROL UNIT: PRIMACH 20L NOTE: COMPLETELY OVERHAULED MACHINE IN 2018

Condition: excellent (used), Panel loading 15 beats per minute, complete with motorized roller conveyors Dcedpfjhv Sttjx Am Reh Loader

Condition: new, Year of construction: 2025, functionality: fully functional, Company Tekstura d.o.o. sales new FOM Industry machines only in Slovenia. Dodpfx Aexu Uyljm Roch

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Dcjdpfxoy Rflyo Am Rjh Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, Year of construction: 2001, Two (2) ABB robots according to photos Dcsdpfxsym Tvws Am Reh

Condition: used, 1 x Foodtools Inc. high-speed duplex slicer supplied with various sized tooling. This industrial food and baked goods slicer utilises a titanium ultrasonic blade to slice round cake porducts. Ultrasonic slicing allows very sticky products to be sliced cleanly and without damage. This machine will portion a variety of frozen or chilled products such as cheesecakes, tray bakes, frozen desserts, sticky/bakery products, and more. Model - ACCUSONIC-2000U. Dcjdpfx Aoy Tpp Uom Rsh Serial number - 2217. Output - 4 to 24 portions / product. Product size range - from 4'' (10.16cm) to 12.5'' (31.75cm) diameter X 6'' (15.24cm) high. Temperature range - ambient to -18C. Maximum operating pressure - 80 psig. Electrical requirements - 240 V / 50 hz / 1 phase. Power - 15 Amps.