Used Erl Ø450 Mm for sale (76,088)

Condition: good (used), Year of construction: 2017, operating hours: 1,885 h, load capacity: 1,400 kg, lifting height: 5,316 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, empty load weight: 1,600 kg, mileage: 1,885 km, This electric TRIPLEX stacker by Still from 2017 is in good condition; The capacity is 1,400 kg; The stacker lifts up to a height of 5,316 mm; Clearance height is 2,265 mm; ONLY 1,885 operating hours; Equipped with FREELIFT; The 2017 battery features an automatic filling system and external charger; Schedule an appointment for a test drive; Watch the video on YouTube Fgedpfxew Nn Tps Aivoh

Condition: used, clear span: 2,690 mm, Technical data for the pallet racking beam: Racking system: SSI Schäfer Type: PR400 Included in the scope of delivery: 01x Pallet racking beam, used Material color: light blue (rusted) Beam type: TRN1-270-10-l INP profile: 100 x 50 mm Fgsdpfx Aez Nhfcjivsh Agraffe: 5 hooks Clear width: 2,690 mm 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the frame profile: Racking system: Stow Type: Pallet rack NS Included in delivery: 1x frame profile, used Material color: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Frame height: 9,650 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Fjdpfxjz Nc Epj Aivsgh General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.

Condition: used, clear span: 2,700 mm, total length: 2,860 mm, total width: 1,050 mm, total height: 3,800 mm, Technical data for the pallet racking system: Racking system: Jungheinrich Type: Delta Fgsdpfsz Ndd Hox Aivjh Technical data for installation: Number of racking rows: 1 unit Length per racking row: approx. 2,860 mm Number of bays / racking row: 1 unit, each 2,700 mm Number of levels including base level: 3 units Included in the scope of delivery: 02x Pallet racking uprights, used Material color: blue Profile dimensions: 80 x 55 mm Including cross and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (welded framework) Height: 3,800 mm Depth: 1,050 mm 06x Pallet racking beams, used Material color: yellow Box profile: 120 x 50 mm Beam type: HN 120x30 Connector: 3 HK (hooks) Clear width: 2,700 mm 12x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 08x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 04x Shims, used Material: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Heidenhain LS 703 ML 620 mm ID: 216 750 0C linear scale SN: 2302669 - cable length: 2 m, used, in good condition, 100% functional, delivery as per photos. Fedpfx Aisx Er Hgjvogh

Condition: used, total length: 1,220 mm, total width: 400 mm, total height: 2,000 mm, load capacity per storage section: 150 kg, We are offering used shelving systems for sale here. TECHNICAL DATA Fgedpfx Asy Dggljivjh Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new product) Shelf: 1,220 x 400 mm (used product) Load capacity per shelf: 150 kg Number of levels: 5 Plug-in assembly Cross brace Graduated prices net per piece, plus VAT: Base units: 1 - 5 units: €41.50 net per piece 6 - 20 units: €39.43 net per piece 21 - 50 units: €37.35 net per piece 51 units and up: €35.28 net per piece Add-on units: 1 - 5 units: €29.50 net per piece 6 - 20 units: €28.03 net per piece 21 - 50 units: €26.55 net per piece 51 units and up: €25.08 net per piece PROJECT DESIGN Our sales team will be happy to create a non-binding offer tailored to your specific needs. TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price is quoted as a unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, material handling technology, storage platforms, textile storage, and machines for the retail, industrial, and craft sectors. We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Win-win – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used shelving units here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €506.50 net (2 starter bays + 8 extension bays) €602.74 gross incl. VAT Tiered Pricing Starter bays: 1 - 5 pcs: €70.00 net y6 - 20 pcs: €66.63 net 21 - 50 pcs: €63.25 net from 51 pcs: €59.88 net Extension bays: 1 - 5 pcs: €50.00 net 6 - 20 pcs: €47.50 net 21 - 50 pcs: €45.00 net from 51 pcs: €42.50 net Large quantities are available directly from stock. YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We can assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. Additional costs vary depending on delivery location and order volume and can be individually quoted upon request. PROJECT PLANNING Our sales team will gladly provide you with a non-binding, tailor-made offer according to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. Fgodoy Hqrkopfx Aivsh PAYMENT TERMS Payment terms are to be agreed upon in the case of an order. The indicated price is per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trade. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Fodpomhhyasfx Aivegh - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone Fgedpfx Aemhhypjivjh - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Fgsdpfxemhh Anj Aivsh - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Fgodpfomhh Dzsx Aivoh - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical data for the pallet racking upright: Racking system: Nedcon Type: AS Included in the scope of supply: 01x Pallet racking upright, used Material color: blue Frame profile dimensions: 100 x 68 x 2.0 mm Includes cross and diagonal braces, Base plates Fodpfx Aji Elmrsivogh The uprights are pre-assembled (bolted frame) 3,200 mm high 900 mm deep

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Fgjdpfxsi Enw Se Aivoh Manufacturer: Dexion Type: P90 for shelf spacing: approx. 300 mm overall length: approx. 380 mm cross-section: U 51 x 25 mm material color: Sendzimir galvanized weight: 0.47 kg | piece

Condition: good (used), The scope of delivery includes: 1x shelf connector/flat bar, used Length: approx. 441 mm Fgodei Euw Espfx Aivjh Center-to-center hole distance: approx. 400 mm Hole diameter: approx. 10 mm Cross-section: approx. 30 x 6 mm Surface: galvanized Weight: 0.62 kg | piece

Condition: excellent (used), The scope of supply includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench crossbars, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbar type: TRV1-240-084-30CE Fedpfxji Ew D Ej Aivsgh Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbench frames are supplied disassembled; - The workbench stands are pre-assembled; - The production time is typically approx. 5 working days.

Condition: good (used), Technical specifications for the balancing plate: Manufacturer: Polypal Included in the scope of delivery: 1x balancing plate, used Fsdpei Hkm Ujfx Aivsgh Overall width: approx. 130 mm Overall depth: approx. 85 mm Material thickness: approx. 1.50 mm Bore hole diameter: approx. 15 mm Number of bore holes: 2 pcs. Weight: approx. 0.12 kg | per piece

Condition: good (used), The scope of delivery includes: 106x wire mesh grating, new Material color: Sendzimir galvanized Load capacity: 500 kg; with uniformly distributed load Design: resting Depth: approx. 1,100 mm (direction of support bars) Width: approx. 1,150 mm Fedpfx Aisi Hkpdsvogh Mesh size: approx. 100 x 60 mm Number of crossbars: 3 pcs. Weight: 5.00 kg | per piece

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Material color: blue Manufacturer: Polypal for shelf spacing: approx. 545 mm Fedpfx Aiji Igcaovegh Overall length: approx. 610 mm Profile dimensions: U 50 x 15 mm Weight: approx. 0.650 kg | per piece General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: excellent (used), Technical data for the picking rack: Rack system: Dexion Type: HI280 Technical data for the installation: Number of rack rows: 01 pcs. Rack length: approx. 1,340 mm Number of bays per rack row: 01 pcs. at 1,290 mm Number of levels plus ground level: 06 pcs. Note: The advantage of a packing table or a picking rack is that all required tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x uprights, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. horizontal and diagonal braces Weight per piece: approx. 5.50 kg The uprights are pre-assembled Height: 1,200 mm Depth: 610 mm 06x shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x shelf beams, used Overall length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized 48x storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight per piece: approx. 0.785 kg 01x load sign With information on bay and shelf loads, manufacturer and order number Fsdpjn Smvhjfx Aivjgh Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damage, corrosion or similar may be present. General product information: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional charges, which can be quoted separately based on delivery location and scope.

Condition: good (used), Note: The grating may show signs of damage, scratches, dents, or welded repairs. Scope of delivery includes: 01x inserted shelf grating, used Material colour: hot-dip galvanized Overall width: approx. 1,640 mm (cross bar direction) Overall depth: approx. 1,183 mm (bearing bar direction) Suitable for upright depth: 1,200 mm Clear support span: approx. 1,090 mm Beam support: approx. 50 mm Bearing bar dimensions: 30/1.8 mm Frame height: approx. 45 mm Mesh size: approx. 68 x 47 mm Weight | Piece: approx. 25.20 kg Internal designation: GR-45 Your contacts in our company: Fsdpfx Aijqwzvcsvjgh Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Year of construction: 2020, condition: new, We are offering for sale a new shelf connector from the manufacturer Nedcon NS. The scope of delivery includes: 01x SET of spacers, new Fedpfx Aief S Iq Tsvsgh Length: 200 mm Material color: Sendzimir galvanized consisting of: 01x Spacer, L=200, Sendzimir galvanized 02x Hex head screw 8.8, M10x25 galvanized 02x Lock nut, 6-sided 8.8, M10, flange, galvanized 04x Hex head screws, M10, galvanized

Condition: good (used), We are offering for sale a used shelf connector from the manufacturer Mecalux. Technical data for the shelf connector: Fgjdpfx Aijd Ttzhevjh Manufacturer: Mecalux The scope of delivery includes: 01x Shelf connector, used Material color: Sendzimir galvanized Shelf spacing: approx. 400 mm Profile height: approx. 80 mm Weight/piece: approx. 0.704 kg/piece 04x Hex head screws, M8 x 20 8.8 04x Hex nuts, M8 04x Washers, M8

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Fgedpsdzq Scofx Aivsh We offer you a new square tube for sale here. The scope of delivery includes: 01 x Square tube, new Material color: hot-dip galvanized Total length: 6,050 mm Profile dimensions: 50 x 50 mm Material thickness: 2 mm Steel grade: S235JRH/275JRH Customs tariff number: 73066192 Manufactured according to: EN 10219-1 Our services at a glance: (Prices on request) Assembly, installation Please note our general assembly conditions Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Nedcon Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,000 mm Max. load per pair of beams 2,200 kg with evenly distributed load 02x locking pin, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out Fjdpfst Ibk Rsx Aivsgh Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 6 • Surface: galvanized • Plug-in assembly • Condition: used Large quantities available immediately. Graduated prices net per piece plus VAT: Basic bay: 1 - 5 bays: €54.00 6 - 20 bays: €52.38 21 - 50 bays: €50.76 From 51 bays: €49.14 Add-on bays: 1 - 10 bays: €39.00 11 - 25 bays: €37.83 26 - 75 bays: €36.73 From 76 bays: €35.69 Ex works Nordhorn. YOUR CONTACTS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We will be happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is understood to be the unit price/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, storage platforms, textile storage, and machines for retail, industry, and trades. Fedpfx Aieuk E Thsvogh We offer you attractive used offers from various manufacturers/brands on an ongoing basis. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Storage technology | Levelmaker® | Logistics | Solutions