Used Ebu Eccentric C-Frame Press for sale (67,763)

Condition: new, Year of construction: 2023, Nominal pressing force 1,000 kN Ram stroke, adjustable in stages 16...140 mm Ram adjustment 90 mm Outreach 295 mm Stroke rate in idle 70 / min Tool mounting height at maximum stroke, bottom and adjustment at the top 420 mm* Table clamping area (W x D) 1,050 x 660 mm Ram clamping area (W x D) 640 x 460 mm Iiedpfx Asdulidemljf Dowel bore in the ram 65 H7 mm Power of the main motor 7.5 kW Approximate machine height 3,085 mm Machine weight 8,500 kg with hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV standards.

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm Iiedpfx Ajfcw Apemlef requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Daylight 1150 Stroke 700 Cylinder dia 300 Iedpfxjg S Uc Ds Amljif New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Manufacturer: Helmerding Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Ijdpfxsy D Uhdo Amleif Stroke Length: 70 mm Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Safety: Two-hand safety start control Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine.

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm Ijdpfxjb Tdqus Amleif weight: 3,3 t

Condition: ready for operation (used), GIZELIS ECCENTRIC PRESS 25 TONS IN VERY GOOD WORKING CONDITION Iisdpfx Aszupqfemlof "Your Next Reliable Production Machine Starts Here"

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm Isdpfsyk D Dtox Amlsif SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Year of construction: 1986, condition: used, pressure 100 t throat 340 mm stroke 8-140 mm Isdpfxjp Syczj Amlsif no. of strokes 50 Hub/min ram - range of adjustment 110 mm table surface area 1000x700 mm ram surface 650x450 mm hole in the table Ø 180 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 10,5 t dimensions of the machine ca. BxTxH 2300x1600x3500 mm

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. Iijdozlyv Tepfx Amljf This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 60 t, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Iedpextpltsfx Amloif Weight approx. 5,000 kg Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, power: 2.2 kW (2.99 HP), pressing force: 25 t, stroke length: 80 mm, overall weight: 1,300 kg, We offer this used Olympia OAFS eccentric press, year of construction 1974. OLYMPIA 25 Ton Mechanical Eccentric Press Manufacturer: OLYMPIA (Greece) Technical Specifications: Press Capacity: 25 Tons Stroke: 80 mm Strokes per Minute: 95 Motor Power: 3 HP Machine Weight: Approx. 1,300 kg Description: Very well-maintained OLYMPIA mechanical eccentric press in excellent working condition. The machine is fully operational and can be inspected under power. It has been used in a professional manufacturing environment and has been regularly serviced throughout its working life. The press features a robust cast-iron frame, large working table, foot pedal operation, and centralized lubrication system, ensuring reliable and accurate performance for stamping, punching, blanking, and general sheet metal processing applications. The machine is mechanically sound, ready for immediate production, and requires no known repairs. Isdpfezbr Stox Amloif Features: Excellent working condition Under power Central lubrication system Heavy-duty cast iron construction Foot pedal operation Reliable and easy maintenance Ready for immediate use If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, Special Offer – 5% Discount Available! 25T Open Back Eccentric Press The 25T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features * Open back frame design * Heavy-duty steel construction * Fixed working table * Transversely mounted crankshaft * Dry pneumatic friction clutch * Adjustable slide stroke * Slide balancing device * Integrated safety valves * Manual controls * High productivity * CE certified Technical Specifications * Press force: 25 t * Stroke under nominal load: 3 mm * Slide stroke: 10–110 mm * Strokes: 80–120 strokes/min * Maximum die height: 250 mm * Die height adjustment: 50 mm * Throat depth: 210 mm * Distance between frame columns: 450 mm * Working table: 700 × 400 mm * Table thickness: 80 mm * Outer table hole diameter: Ø170 mm * Table hole depth: 20 mm * Inner table hole diameter: Ø150 mm Iiedpfx Asytcvgemlof * Slide surface: 360 × 300 mm * Punch hole diameter: Ø40 mm * Punch hole depth: 60 mm * Motor power: 3 kW * Machine dimensions: 1460 × 950 × 2380 mm * Machine weight: 3100 kg Standard Equipment * Light curtains * Mechanical safety guards * Lower table ejector * CE Declaration of Conformity * Technical documentation Applications * Punching * Stamping * Bending * Forming * Sheet metal production * Metal fabrication workshops * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Iisdpfx Amoyn Rhyolef Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Ijdpfx Asykbcmsmleif Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Year of construction: 1991, condition: used, pressure 63 t throat 275 mm stroke 8-120 mm no. of strokes 30-120 Hub/min ram - range of adjustment 85 mm Ijdpfx Amelp U Dtjloif hole in the table 220x100 mm table surface area 750x540 mm ram surface 400x260 mm table height 820 mm tool hole in ram Ø 50 mm total power requirement 7,7 kW weight of the machine ca. 5 t dimensions of the machine ca. BxTxH 1500x2000x2450 m

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Iisdpfx Amozi Hchslof Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Rams: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! Iodpfx Aszuw D Tjmljif MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: used, Year of construction: 2000, machine/vehicle number: 510565, functionality: fully functional, operating hours: 5,840 h, Offered for sale is an eccentric press. Iodpfx Asxvqnbemleif Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee.

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Isdpfxetq Eqxo Amljif

Condition: reconditioned (used), functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 1,600 kg, working width: 3,000 mm, working height: 2,000 mm, Branded, used hydraulic press designed for bonding frame structures such as window and door frames. It consists of a robust, welded steel frame made of thick-walled, closed profiles and solid I-beams, offering high rigidity and strength. The machine is equipped with a central electro-hydraulic pump controlled via a central control panel. The height of the lower beam is adjustable in 3 levels. Working area dimensions: 3000 x 2000 mm Pump motor power: 2.2 kW Total pressure: approx. 14 + 6 tons Iisdpfx Amjvva D Nolsf Dimensions: 3800 x 1000 x 2660 mm Weight: approx. 2000 kg CE safety standard Please inquire in advance about the machine's availability. In stock at Telnice near Brno. Warranty: 6 months – warranty and post-warranty service (valid in the Czech Republic and Slovakia). Testing, demonstration, and operator training are standard.

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic portal straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and is equipped with an integrated tooling clamping device as well as parallel control for bending blades. Thanks to its movable table, sliding cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Specifications - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Gantry press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: depending on load ==== Hydraulics & Performance - Pressure setting: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free breakout force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples ==== Construction & Features - Integrated tool clamping device Iiedpswgakvjfx Amlef - Parallel holding for bending blade - Induction-hardened cylinder - Machine body powder-coated / double painted - T-slots to customer specification ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) ==== Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are constructed according to German machinery guidelines as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our core strengths are special purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t Iedey Nd Svepfx Amloif dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: new, Year of construction: 2025, pressing force: 20 t, Forging Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Press – Table 500 × 600 mm For sale is a compact single-column forging press (C-frame) from the manufacturer Durendus, model DCS-20, with an adjustable pressing force of 5 to 20 t. This machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, high traverse speeds, and is ideally suited for small-scale forging, forming, and assembly work. ===== Technical Data & Information: Forging Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,450 × 1,500 × 2,400 mm ==== Working Area - Max. installation height: 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or as per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 90 mm - Piston rod diameter: Ø 60 mm - Rapid traverse cylinder: Ø 40 mm - Rapid traverse piston rod: Ø 25 mm - Operating pressure: max. 250 bar (adjustable) ==== Speeds - Return speed: 140 mm/s - Idle speed: 140 mm/s - Pressing speed: 4 – 10 mm/s (adjustable) - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 22 l/min - Motor power: 7.5 kW - Oil tank capacity: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic power unit: mounted at the upper rear ==== Electrical - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 10 kW ===== Forging, forming technology, assembly work, small batch production, workshop applications, metalworking Forging press, single-column press, C-frame press, hydraulic press, forming press, workshop press, small press Iiodpfxeyght Re Amlof Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German machinery directives, as well as European machine guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our key strengths are special machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are predominantly equipped with components from leading European manufacturers.

Condition: used, Year of construction: 2000, machine/vehicle number: 309661, functionality: fully functional, operating hours: 6,750 h, Offered for sale is an eccentric press Manufacturer: SCHULER / Römer GmbH Type: PN 63-250 Rated force: 630 kN Ram stroke: 8–100 mm Stroke rate: 140 strokes/min Two-hand and foot operation Separate control cabinet Used, fully functional condition. Collection by the buyer; assistance with dismantling/transport can be arranged if required. If interested or if you have any questions, please feel free to send me a message. On-site inspection by appointment is possible. Isdpfoxvqmkjx Amleif Further metalworking machinery such as bench drilling machines, press brakes, pillar drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – dismantling and transport by the buyer or by arrangement. If you are interested or have questions, feel free to send me a message. Further photos and technical details available on request. All information subject to change and without guarantee. Errors and prior sale reserved. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp We handle all customs and registration matters for a fee. We can deliver vehicles to the port for an additional charge.

Condition: used, Year of construction: 1999, Hydraulic press Dunkes HEZ 100-40, year of manufacture 1999 Hydraulic press Dunkes HS2 63, year of manufacture 1999 Eccentric press Ebu 75, year of manufacture 1985 Iijdpfxszu Arvj Amlof