Used Dmc Lsl 130 for sale (4,685)

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg Bedpfszauxgox Ac Tell If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Includes 6 temperature measurements in the respective supply line Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Bedpfx Aszd Rtyoc Tsll Includes frequency inverter-controlled pump in the main circuit Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2006, Horizontal machining center Machine type: DMG DMC 100 H Control: Siemens 840D powerline + Shopmill Year: 2006 SPECIFICATIONS Travel X-Axis: 1.000 mm Y-Axis: 1.000 mm Z-Axis: 1.000 mm Spindle speeds: 8.000 rpm Transmission ratio: 2 Spindle power: 100/40% - 32/44KW kW Torque: 100/40% - 827/1.241Nm Nm Tool: HSK 100 Tool capacity: 270 Amount of paletts: 2 Palett size: 800 x 800 mm Bedpjziy Dljfx Ac Tjll B-Axes: 0,001° Equipment Electronical handwheel Working mode: 4 Oil mist separator Internal cooling: 40 bar paper band filter Caliper: Renishaw OMP 60 Chip rinsing pistol

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min Bledpsy A Tdnefx Ac Tol control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t

Condition: like new (used), Year of construction: 2023, functionality: unexamined, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, as new Operating hours: 0 h Working width: 1.350 mm Bledpszyghlofx Ac Tsl Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. Final commissioning will be arranged in agreement with the buyer. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Year of construction: 2022, condition: new, 1 x Niro-Tech all stainless steel fresh meat grinder. Model - WR-130. Output capacity - Up to 3,500kg/h depending on product. Installed power - 9kW. Bjdpehq Rgdofx Ac Tjll Electrics - 400v, 50hz, 3 phase. Hopper size - 90 litres. Meat temperature - 0-4degC Comes with a set of 1 x grinder and 2 x cutting blades. Comes with a range of hole plates with 3mm, 5mm, 8mm, 10mm, 14mm and 20mm diameter. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 6-8 weeks for the manufacture of this machine. Videos available on request.

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, motor from machining center Schleicher WV-SYS 160-1050 -Type: MAC112B-1-PD-2-C / 130-A-1 / S005 Bsdpfxog Ehakj Ac Tjll -Speed: 1500 rpm -Brake: 14 Nm DC 24 V -Shaft: Ø 32 x 60 mm -Number: 2x motors available -Price per piece -Dimensions: 550/210 / H250 mm -Weight: 38 kg

Year of construction: 2026, condition: new, functionality: fully functional, New machine 2-year warranty Available in 4 different versions, knife heads are also replaceable Advantages: + Unbeatable price-performance ratio + Already standard: mobile machine, ideal for quick floor sweeping + Dividing blades made of stainless steel + Quickly replaceable, coated knife head + Up to 4 different knife heads can be used with one machine + Extremely wide weight range (16 g - 400 g for round dividing possible!) + Uniform division of the dough, excellent round dividing of the dough pieces + Dividing function can be deactivated by pressing a button + Ergonomic knife cleaning position (head can be swiveled forward by 90 degrees) + Dividing function, pressing time, and dividing duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the dividing chamber height + Side holder for dividing disks, readily accessible STANDARD accessories: 3 dividing disks included General technical data: Power: 1.3 kW Connection values: 400V - 3-phase - 50Hz Fuse: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (W x D x H) Net weight: 380 kg Size 4-14: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on the dough) Dough input: 1,820 - 5,600 grams (depending on the dough) Optionally available: - Additional dividing disks Surcharge: 115 EUR net / piece - Additional knife head (including 3 dividing disks) Blodpfoivdncjx Ac Tel Surcharge 1,840 EUR net / set

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + very good price-performance ratio + already included as standard: mobile machine, ideal for quick dough processing + cutting blade made of stainless steel + coated cutting head + uniform division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swivelled 90 degrees forward) + easy and quick adjustment of the processing chamber height + side holder for the processing plate, readily accessible STANDARD equipment: + 3 processing plates included General technical data: Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Bjdjivdnnopfx Ac Tjll Size 4-30: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on dough/product) Dough input: 1,820 - 5,600 grams (depending on dough/product) Optionally available: - additional processing plates Surcharge: €115.00 net / piece

Condition: ready for operation (used), Indramat MAC 112A-0-LD-2-C/130-A-0 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Bjdpfx Acoi D Iiks Tjll

Condition: ready for operation (used), Indramat MAC112D-0-HD-2-C/130-A-2//SO18 servo motor, serial number 41402 V, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, in good condition, 100% functional. ATTENTION: Please request a separate quote for packaging and shipping costs! Bledpfoi D Iqysx Ac Tsl

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling Bsdpfx Acjflw A De Toll -Hollow shaft: Ø 40 mm -Dimension: Ø 130 x 80 mm -Weight: 5.5 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 130 mm -Piston rod: Ø 40 mm -Mounting holes: Ø25 x 35 mm -Cylinder: outside Ø 106 mm Bljdpfx Asgvm Dfoc Tol -Dimensions: 560/140 / H110 mm -Weight: 17 kg

Condition: used, Lever measuring device, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert -Hardness: Rockwell dial gauge Blsdpfofbyc Aox Ac Tel -Diameter: 130 mm -Height: 50 mm -Weight: 0.6 kg

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, permanent magnet main drive motor from machining center Werner TC 2.6K -Type: MAC112B-O-GD-2HC / 130-AO -Power: 3.55 kW -Speed: 2750/6000 rpm -Shaft: Ø 32 x 60 mm Bledpfx Acjgz Tkis Tol -Dimensions: 445/195 / H245 mm -Weight: 38 kg

Condition: ready for operation (used), Rexroth MAC112C-0-KD-4-C/130-A-2/WI522LV/S018 Servomotor MNR: R911229488,used, good condition, 100% functional, scope of delivery as per photos Bledpfx Asuc Ii Ioc Tel

Condition: new, Rexroth MDD112C-N-030-N2M-130GB1, part no.: R911264264, serial no.: 7162111000378, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bljdji D Nhlopfx Ac Tjl

Condition: ready for operation (used), Agie Digital motor control unit DMC-01 B 626074.9, used, minor signs of wear, 100% functional. Bodpfx Acei D Tvys Tjll

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Bledpfsyay D Uox Ac Tol Pallet dimensions (mm): 560×790 Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Chip conveyor Blow air through spindle selectable via M function Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) Blsdpfx Asxacfmec Tjl with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: used, mileage: 362,000 km, power: 96 kW (130.52 HP), first registration: 06/2014, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, !!!!! ENGINE FAILURE !!!!! 3-seater, power steering, driver airbag, 6-speed manual transmission, tachometer, power steering, electric windows, onboard computer, electric exterior mirrors, center armrest, gullwing doors, side door/right, central locking + remote control, 3-pin power socket, Thermo-King V-300 Max refrigeration unit, air conditioning, etc. Sale only to commercial businesses and for export.!!!!! All documents can be sent in advance by email or WhatsApp to check mileage, accident history, vehicle history, etc.!!!!! WhatsApp!!!!! !!!! Fg-8925 !!!! Key number 185 !!!!! Bedpfx Aezp S Aasc Tsll

Condition: used, mileage: 350,920 km, power: 96 kW (130.52 HP), first registration: 06/2015, fuel type: diesel, overall weight: 3,300 kg, color: grey, gearing type: automatic, emission class: euro5, number of seats: 3, loading space length: 2,900 mm, loading space width: 1,900 mm, loading space height: 1,900 mm, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, !!!!! ENGINE FAILURE !!!!! Bsdozp S Agopfx Ac Tsll 3-seater, power steering, driver airbag, automatic transmission, tachometer, power steering, electric windows, onboard computer, electric exterior mirrors, center armrest, gull-wing doors, sliding side door/right, central locking + remote control, 3-pin power outlet, Carrier Xarios 350 refrigeration unit. Errors and prior sale excepted. For sale to commercial businesses and for export only. !!!! Fg-7146 !!!! Key number 156 !!!!! !!!!! Test drive/inspection drive at TÜV, DEKRA, or Fiat possible !!!!!

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Complete meat grinding set The set on offer is a complete meat grinding station built around the NOMA NOWICKI W-130 AL angle grinder, manufactured in 2025. Besides the grinder itself, the set includes a W-130 column bin lift that makes it easy to load raw material directly from bins into the machine’s throat, W-130 tool trolleys, a complete set of sieves/plates, and spare parts, making the offer a ready-to-use, self-contained production station. How does the NOMA NOWICKI W-130 AL grinder with bin lift work? Meat raw material is placed in a tool trolley, which is then raised by the column bin lift and tipped directly into the grinder’s feed hopper, eliminating manual carrying and lifting of heavy raw material. Inside the machine, raw material is moved by a feed screw to the cutting assembly, where knives and sieves/plates (selected according to the desired grind size) reduce it to a uniform structure ready for further processing — meat batters, stuffings, sausages, or burgers. The angle design of the W-130 AL grinder allows for a compact station layout and ergonomic operation, while its solid stainless and acid-resistant steel construction makes it easier to maintain a high hygiene standard. Bodpfx Acezxf Afo Tell Key advantages of the NOMA NOWICKI W-130 AL set The column bin lift significantly streamlines raw material logistics at the station, reducing operator physical strain and shortening the time needed to load successive batches of meat. The addition of W-130 tool trolleys allows smooth movement of raw material between production stages, and the included set of sieves/plates enables quick changes to the grind size of the processed product without needing to purchase additional tooling. Manufactured in 2025, the set on offer is virtually new, and the included spare parts provide extra assurance of continuous station operation from the very first days of use. Technical specifications of the NOMA NOWICKI W-130 AL set NOMA NOWICKI W-130 AL grinder Manufacturer: NOMA Nowicki Machinery Model: W-130 AL Serial number: 08025235 Year of manufacture: 2025 Powe: 13 kW in 1st gear, 20 kW in 2nd gear Power supply: 3 x 400 V / 50 Hz Grinder dimensions (L x W x H): 1650 x 1550 x 1670 mm Construction material: stainless and acid-resistant steel Compliance: CE, Made in EU Set components W-130 column bin lift – dimensions: 1150 x 1200 x 2850 mm W-130 tool trolleys Complete set of sieves/plates Spare parts Overall set dimensions (L x W x H): 2350 x 1750 x 2850 mm Application of the NOMA NOWICKI W-130 AL set The set is used in meat processing plants, butcheries, slaughterhouses, and facilities producing stuffings, sausages, burgers, and pâtés — wherever, in addition to the grinding itself, efficient logistics of feeding raw material into the machine matter. The column bin lift makes the station well suited to working with large batches of raw material delivered in transport containers.

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Blsdpfx Acozf Ibks Tel Subject to changes and errors in the technical data, as well as prior sale.

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 6400 mm Blodpfxjzf I Tts Ac Tsl Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors