Used Distributor Manifolds for sale (401)

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). Ncodpsywtxbsfx Amnot We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Nedsy Nkqxepfx Amnsct Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation Ncodpfx Asywuczjmnet  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: excellent (used), Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, torque: 80 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840 D SL Solution Line mit NCU 730, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, total height: 3,500 mm, total length: 5,900 mm, total width: 3,990 mm, overall weight: 24,500 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 8,000 h, Equipment: chip conveyor, Horizontal double swivel-beam machining center with 2 spindles - Linear and torque motors in the feed axes - Gantry drive for the Y-axis - Independent Z-axes and X-axes - Double swivel beam with two integrated rotary axes for loading and unloading parallel to main processing time - Siemens Sinumerik 840 D SL Solution Line control with NCU 730 - Oil distributor for NC rotary table - 1 set of clamping bridge supports - Torsion compensation - 5th axis directly driven twice - Boring head indexing - Base module for clamping hydraulics - Pneumatic pressure intensifier - Scraper belt conveyor - Automatic loading door - Emulsion mist extraction unit Nodpfx Amsw Hgk Ajnect - Automatic rinsing cycle for loading area - Tool flatness monitoring - Position monitoring, base module and extension - Grating/walk-on grid - 24 quick-release couplings SW-ID No. 413288 - Tool breakage monitoring, inductive etc.

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: Nodpfxjy Ii Dzs Amnect A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Nedex Nuf Hopfx Amnect Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, mileage: 100 km, power: 130 kW (176.75 HP), fuel type: diesel, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,000 mm, loading space width: 2,400 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, crane, cruise control, electronic stability program (ESP), fog lights, immobilizer system, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, power mirror, tachograph, traction control, truck registration, Technical Data * Brand: IVECO * Model: Daily 70C18 * Vehicle Category: Fixed box body 5000 x 2200 x 400 * Year of manufacture: 2025 * Emission standard: Euro 6 * Engine displacement: 2999 cc * Engine power: 180 hp * Fuel type: Diesel * Cabin color: Grey * Wheelbase: 4750 mm * Gross vehicle weight: 7200 kg * Suspension type: Reinforced parabolic springs * Twin rear wheels * Axle configuration: 4x2 * Transmission type: Manual * Cabin type: Day cab, 3 seats * Air conditioning: Automatic * Air-sprung driver's seat * ABS: Yes * Hydraulic crane HYVACRANE HB40 – E3 COMPONENTS / PERFORMANCE STANDARDS: ▪ Crane designed and built using finite element method, ▪ Crane structure made of top quality Swedish steel, ▪ Crane manufactured according to the latest applicable standards EN12999, group HC1-HD4. ▪ CE-marked crane with stability system, CRANE BOOM AND BASE: ▪ 3 hydraulically extendable arms (marked grey), ▪ 370 degree slewing angle (slewing via rack), ▪ Mechanical slewing limiter ▪ Centralized base lubrication system ▪ Swivel hook at the end of the boom CRANE CONTROLS: ▪ Ergonomic control panels on both sides of the crane with emergency stop. Safety, ▪ Cross control (identical lever arrangement) on both sides of the unit, SUPPORT LEGS: ▪ Outrigger beam mechanically extensible, span 3.41 m, ▪ Outrigger legs can be rotated manually by 180 degrees. ▪ Hydraulically lowerable/raiseable outriggers ▪ Swivel-mounted outrigger pads, ▪ Independent control of outriggers on both sides, HYDRAULIC SYSTEM: ▪ Hydraulic oil tank with hydraulic oil temperature indicator, ▪ WALVOIL distributor, ensuring very high working precision, ▪ Hydraulic locks on all crane cylinders, Crane Technical Data Manufacturer: HYVA Model: HB 40E3 Lifting capacity 3.83 m – 995 kg 5.18 m – 715 kg 6.53 m – 555 kg Technical specifications Lifting moment (tm): 3.81 Max. lifting capacity (kg): 995 Max. outreach (m): 7.88 Max. lifting height (m): 10.51 Slewing angle (°): 370 Oil tank capacity (l): 30 Max. oil flow (l/min): 16 Operating pressure (bar): 215 No hidden fees with us: - Delivery charges €0 - Documentation €0 - COC €0 - First inspection €0 Financing, leasing, cash payment MORE INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: Mon.-Fri. from 9:00 to 17:00 On Saturday by appointment wir sprechen deutsch we speak English говорим по-русски Ncjdpfxoy Ud D Ao Amnet mówimy po polsku

Condition: used, Year of construction: 2012, functionality: fully functional, Messer Cutting Systems Multitherm 4000 - Oxy-fuel Working area: 2500 x 15000 mm 1 Global Control Plus CNC controller 50 m network cable 1 cooling unit for control cabinet 4 laser diodes 6 drives 1 heat shield (without air cooling) 1 heat shield (without air cooling) 20 m track 1 OmniFlow oxy-fuel supply, 100 cbm 1 compressed air supply on the machine 1 distributor block for compressed air purging 1 oxy-fuel take-off point with pressure regulator 1 take-off point for compressed air 4 ALFA machine cutting torches Ncedpfoynzfpex Amnet 4 compressed air purges for ALFA 4 torch suspensions OL 200 N 4 Sensomat Alfa 20 m energy supply via energy chain 1 emergency pull cord (front) 1 emergency pull cord (rear) 2 wheel well safety devices Including tables and rails

Condition: new, mileage: 10 km, power: 110.32 kW (149.99 HP), fuel type: diesel, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, full service history, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, ISUZU M30H 150 HP Permissible gross weight: 7,500 kg Wheelbase: 3,365 mm Standard Equipment • AGR - DPD - SCR • 7-inch multifunction display • Exhaust brake • Electrically adjustable and heated exterior mirrors • Immobilizer • Seat belt warning system • Headlamp washers • Manual air conditioning • Electric parking brake • Air-suspended driver’s seat • Front and rear fog lights • DAB+ radio - Bluetooth • USB charging port • Central locking with remote control • Multifunction steering wheel • Driver and passenger airbags • Power windows • Hill Start Assist (HSA) • Bi-LED headlights and taillights • Headlight range adjustment • Automatic headlights • Warning lights in case the driver's cab is not properly secured against tilting • Two-way adjustable steering wheel • Speed limiter (90 km/h) • Start-stop system • Removable cup holder • Spare wheel ENGINE ISUZU 4JZ1E6N diesel engine, 4 cylinders, 16 valves. Common-rail injection with DENSO i-Art direct injection. Turbocharged with electronically controlled VGS turbocharger, intercooler, and variable exhaust valve timing. DISPLACEMENT: 2,999 cm³; OUTPUT: 110 kW (150 HP) at 2,800 rpm; MAXIMUM TORQUE: 375 Nm at 1,280 – 2,800 rpm. EMISSION CONTROL: EURO VI OBD-E. Safety Package 2 ABS: Anti-lock braking system DWS: Front collision warning system AEBS: Advanced Emergency Braking System ASR: Traction control system AEBS for pedestrians and cyclists: Automatic emergency braking with pedestrian and cyclist detection EBD: Electronic brakeforce distribution FVSN: Following vehicle warning system Intersection warning: Blind spot monitoring when turning EVSC: Electronic stability control DDAW: Driver attention warning system AEBS: Automatic emergency braking system LDWS: Lane departure warning system RM: Reversing camera TSR: Traffic sign recognition MOIS: Motion detecting system BSIS: Blind spot information system TPMS: Tire pressure monitoring system Tanks: 100 l, 14 l AdBlue® TRANSMISSION AND RATIOS: Manual, 6-speed Capacity: 3 persons Axles: 2, rear drive axle with twin tires Brakes: Front and rear: 310 x 42 mm internally ventilated disc brakes with asbestos-free pads. Hydraulic system with brake booster and ABS to EC standards, separate brake circuits on both axles. Drum parking brake on the propeller shaft. Suspension: Front and rear: parabolic springs with integrated rubber stops, double-acting hydraulic telescopic shock absorbers. Front and rear stabilizer bars. Electrical system: 24 V – alternator 90 A – 2 x 90 Ah batteries (F-Space: 2 x 70 Ah) BODY TECHNICAL DATA Hooklift system: 90 cm City System Marrell Length: 3,300 mm Payload: up to 4,000 kg EQUIPMENT Container protection: Internal hydraulics Hydraulic manifold Hydraulic pump Oil tank Wide rollers for container stability Stainless steel hook frame Steel construction sandblasted and epoxy primer coated Marker lights Work platforms Work light 1 pc. Additional headlights Njdpfx Amsy Ucxrjnoct Rear lamp cover frame No hidden charges with us: - Transfer costs: 0 - Documents: 0 - COC: 0 - First inspection: 0 Financing or Leasing available FURTHER INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: ONLINE SALES wir sprechen deutsch we speak English говорим по русски mówimy po polsku

Condition: used, Year of construction: 1983, Used Capping Machine Bertolaso Sigma 103: A Detailed Analysis One of the machines that has shaped the evolution of the bottling industry is the capping machine Bertolaso Sigma 103. This model remains an epitome of excellence in its domain, ensuring precision and quality in the bottle capping phase. Main Features: Ncjdjvguchspfx Amnjt This capping machine stands out for its 3 pressure heads, specifically designed for the 31.5 X 18 H Aluminium Screw cap. This particular configuration guarantees an effective and secure seal, preserving the properties of the bottle’s contents. Another noteworthy feature is the vibration cap distributor. This ensures a technology which provides consistent, even distribution of the caps and prevents interruptions in the production process. The mobile capping heads and the manually height-adjustable capping head provide increased flexibility in handling different types of bottles and caps. This results in greater adaptability to various production needs. The Bertolaso capping machine has a painted frame that, combined with a stainless steel fairing not only ensures durability over time but also offers effective resistance to corrosion and other external agents. For optimal safety during use, the machine is equipped with safety protections. Bottles are introduced from the left, allowing for better organization of the production space. The production speed is adjustable, thus offering the possibility to tailor the output to specific requirements. Furthermore, the Bertolaso Sigma 103 can manage two cylindrical bottle formats. In terms of production capacity, the machine can reach an output of approximately 4,000 units per hour for the 31.5 X 24 cap. Options and Customizations: For those requiring added versatility, options such as overhauls and modifications for the 31.5 X 44 cap distribution are available in the Used Capping Machine Bertolaso Sigma 103. It’s crucial to note that the used Bertolaso Sigma 103 capper will be supplied with only one set of capping heads, suitable for a single type of threading and flanging. Conclusion: The Used Capping Machine Bertolaso Sigma 103, despite being a model with several years behind it, the used Bertolaso Sigma 103 capper remains a benchmark in the bottling world. Its robustness, flexibility, and the array of available options make it an excellent choice for those seeking efficiency and reliability in a single machine.

Condition: used, Year of construction: 1996, Used Capping Machine Bertolaso Sigma 603 up to 4500 bph Firstly, the used Bertolaso Sigma 603 capping machine is a technologically advanced solution. It ensures high performance up to 4500 bottles per hour. Designed for maximum efficiency in the capping process, it integrates seamlessly into production lines. Indeed, its versatility and reliability are unparalleled. Technical Features of the Capping Machine Bertolaso Sigma 603 Specifically, the Capping Machine Bertolaso Sigma 603 model features three heads for aluminum screws. These are configured for caps measuring 31.5 mm by 44 mm. Furthermore, a centrifugal cap distributor ensures constant and precise cap feeding. Consequently, it optimizes the capping process, eliminating interruptions. Moreover, mobile capping heads and a manually adjustable height capping head offer great flexibility. They easily adapt to different bottle and cap types. Additionally, the Capping Machine Bertolaso Sigma 603’s frame is painted and clad in stainless steel. This ensures durability and ease of cleaning, which is essential in production environments. Safety and Efficiency Regarding safety, integrated safety protections ensure operator safety during the bottling process. Furthermore, bottle entry from the left and adjustable production speed offer significant control. The machine can handle three formats of cylindrical bottles, demonstrating exceptional versatility. Hence, the capacity of the Capping Machine Bertolaso Sigma 603is of 4500 bottles per hour, this highlights its productivity. History and Reliability Manufactured in 1996, the Capping Machine Bertolaso Sigma 603 has proven its reliability and longevity. These factors are crucial for those seeking an efficient but used capping solution. Its long service history confirms the machine’s quality construction. It also shows its ability to maintain high performance over time. Conclusion of the Capping Machine Bertolaso Sigma 603 Ncjdpfx Aevgt Hxemnjt In conclusion, the used Bertolaso Sigma 603 capping machine up to 4500 bph exemplifies Italian engineering in the bottling sector. Through its combination of flexibility, efficiency, and safety, it makes an ideal choice. It ensures high production capacity and consistent quality of the product, making it a valuable asset for any bottling line.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 4,500 mm, total width: 7,500 mm, total length: 1,000 mm, SPECIAL PRICE – only €5,900 instead of €6,900! Save €1,000 now – limited-time special offer. Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model with 1500 W Raycus CE-certified laser source offers four integrated functions for professional metalworking: ✅ Key Features: Laser Welding – precise, deep, and virtually distortion-free Laser Cutting – ideal for thin sheets up to approx. 4 mm Laser Cleaning – effectively removes rust, paint, and oxide Seam Cleaning – cleans the weld seam immediately after welding 📌 Technical Specifications: Laser power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Fiber optic cable: 10 meters Cooling: Integrated water cooling Operating modes: Welding, cleaning, cutting, pulse Voltage: 3×400V / 50–60 Hz Welding speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Delivery Includes: 1× LMH1500 Laser Welding Machine 1× Handheld Welding Gun with nozzles 1× Automatic Wire Feeder 1× Laser Safety Glasses 1× User Manual (German) 1× CE Declaration of Conformity 1× Risk Assessment according to Machinery Directive 💼 Areas of Application: Suitable for stainless steel, galvanized sheets, aluminum, copper, brass, and more. Ideal for workshops, mechanical engineering, metal construction, body shops, or maintenance. 🔒 Certified & Safe: CE certificate including risk assessment according to EU directives. Delivery includes all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: Delivery via freight forwarding (pallet shipping) within Germany & EU – shipping costs upon request. 🧾 Invoice with VAT shown will be issued. Nsdpfxjw Tfbre Amnsct ✅ Buy now and have it delivered ready for immediate use!

Condition: used, mileage: 88,060 km, power: 115 kW (156.36 HP), color: yellow, gearing type: automatic, loading space length: 60,600 mm, loading space width: 24,500 mm, loading space height: 25,200 mm, Year of construction: 2020, Equipment: ABS, power assisted steering, For vehicle inquiries, Mr. Seidel will assist you (by phone). Nedpfx Ajyxklnomnoct Mercedes-Benz Axor 816 4x2 box body for furniture transport A1M Front axle, 4.1 t; A2B Rear axle, crown wheel 325, hypoid, 6.2 t; A5L Axle ratio i = 3.417; B1B Electronic braking system with ABS and ASR; B1C Electronic compressed air supply unit, low; B1F Heating for the electronic compressed air supply unit; B2A Disc brakes on front and rear axles; B4A Condensate monitoring for compressed air system; C2J Wheelbase 4,220 mm; C5I Mounting parts for flatbed body; C6A Steering ZF 8090; C6Z Reinforced stabilizer, underframe, rear axle; C7A Rear underrun protection (ECE); C7M Side guard, weight-optimized; D1B Standard driver’s air suspension seat; D1S Standard passenger’s air suspension seat; D1Z Middle seat with 3-point safety belt; D3X Flat fabric seat cover; D4A Standard dashboard; D4W Electric windows, both sides; D6Y Pollen filter; D7L Overhead storage above the windscreen, 1 compartment; D8A Roof hatch/vent; E0Y Battery cover; E1E Maintenance-free batteries, 2 x 12 V/100 Ah; E1N Generator 28 V/100 A; E3F Additional 12 V/15 A socket on the beltline; E3I Additional 24 V/15 A socket on the beltline; E5A Switch No. 1 for bodybuilder electrical system; F1X S-Cab ClassicSpace, 2.30 m, tunnel; F6C Tinted windscreen; F6I Heated front mirror; F6J Electrically adjustable main mirror, driver’s side; F7W Single-step cab entry; F8E Central locking; F8L Immobilizer with transponder; F8X Rain/light sensor; G0U Economy driving mode; G1B G 70-6/5.94-0.74 transmission; G5G Mercedes PowerShift 3; I0E Tubeless tires 215/75 R 17.5 front/rear; I4A 4x2 axle configuration; I5Q 7.5-ton vehicle; I6W Leaf suspension, rear axle; J1A 10.4 cm instrument cluster; J1O 2nd generation digital tachograph, ADR; J1S Tachograph manufacturer VDO; J3N Fleetboard Eco Support; J5S Radio with USB port and Bluetooth; J9D Pre-equipment for toll registration; J9N Pre-equipment for Truck Data Center 6 (DTCO); K0E Plastic tank 120 l, left; K3T AdBlue tank 25 l; K5M Lockable tanks; K5S Protective cap for AdBlue dosing system; K7I Exhaust system on right frame, tailpipe inward; L1B Daytime running lights; L1H Halogen fog lamps; M0S Noise insulation to ECE; M1H Engine OM934, inline 4-cylinder, 5.1 l, 115 kW (156 hp), 650 Nm; M5C Engine version Euro VI, D; Q1J Front spring 3.6 t, parabolic; Q2A Rear spring 4.6 t, parabolic; Q8L Crossmember for G135 trailer coupling; R0Z Wheel nut cover; R1A 6.00 x 17.5 tapered rim; S1D Stability Control Assist (ESP); S1H Lane Keeping Assist; S1P Active Brake Assist; S5A Speed limiter 90 km/h / 56 mph, ECE; S5Z Cruise control; S8A First aid kit; S8C Warning triangle; S8D Warning lamp; S8E Warning vest; T0F Weight option 7.49 t (3.6/4.6); U2I EBS control code, 4th generation; U3F Control code, Global AdBlue Sensor (GMS DEF); V1D Atego new distributor; V1W Standard; V2T Atego model generation 1; V6C Minimum equipment for flatbed/box vehicles; V7C Dry freight box body; V8A VIN chassis number; X2E EU type plate; X2T Maintenance documentation; X2Y Registration certificate, Part II, prepared; X3O Mercedes-Benz OnRoadService; Y1C Control for paint tones, solid double-runner; Y1G Cab paint allocation, topcoat line 2; Z3H Side marker lights, 1st position; Z3I Side marker lights, 2nd position; Z4D Inline engine, 4-cylinder. Cargo space dimensions: L 6,060 mm, W 2,450 mm, H 2,520 mm Gross vehicle weight: 7,490 kg Unladen weight: 4,975 kg Payload: ...

Condition: used, mileage: 26,977 km, power: 130 kW (176.75 HP), first registration: 09/2024, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,118 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Exhaust system, WLTP3 N1-III, N2//EU6EA * Front-wheel drive * 4-cylinder diesel engine 2.0L unit 03N.G * 6-speed manual transmission * Diesel engine 2.0 l / 130 kW (4V) * BIT, Common-Rail base engine: TK1/TK4 * Diesel fuel system * Start-stop system with brake energy recuperation * One front towing eye * Preparation for towing device (incl. trailer stability control) * Long wheelbase 4,490 mm * 75 l fuel tank * Front disc brakes, 16'' Njdpfjy R Iinsx Amnoct * Reinforced front axle (2,100 kg load capacity) * Permissible gross vehicle weight 3,500 kg * Electronic immobilizer * Daytime running lights with assistance light and automatic coming/leaving-home function * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo area * Fog lights incl. cornering light * Side marker lights * Exterior mirrors, electrically adjustable and heated * Left and right exterior mirrors convex, with integrated LED indicators and wide-angle section * High roof, painted in vehicle color * Rear step covering full width * Entry handles on rear pillars * Radiator grille, black with chrome strip * Rear wing doors with enlarged opening angle * Front, rear, and tailgate windows in heat-insulating glass * Windshield wiper interval switch with light and rain sensor * Sliding door, right, in load/passenger area * Laminated windshield with heat-insulating glazing, heated * Cabin doors additionally with reinforced door hinges on driver’s side * Driver and front passenger airbags with passenger airbag deactivation * Roof shelf with storage compartments, two 1-DIN slots and reading light * Sun visors, folding and swiveling to side * Electronic parking brake * Premium interior noise insulation * Glove compartment with lockable, illuminated lid * Climatronic air conditioning in driver’s cab * Multifunction steering wheel * 12V socket and two cup holders in instrument panel * Three-point automatic seat belts with height adjustment and electric belt tensioners in front * 12V sockets in driver’s cab * Belt control, electric contact in belt buckle * Keyless Go * Chrome package * 'ergoComfort' suspension seat, left * Front double passenger seat bench, right, with storage compartment and foldable center backrest * Seat covers in robust fabric 'Marathon' * Seat heating, individually adjustable * Digital instrument cluster * Tire pressure monitoring display * External USB Type-C data socket(s) and high-power charging socket(s) * 4 speakers: 2 tweeters, 2 woofers * Navigation system (Baseline) * MAN Media Van Navigation Business * Digital radio reception (DAB+) * Wired & Wireless App-Connect * Online service, with OCU, with head unit * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * Electronic Stability Program (ESP) and ABS with electronic differential lock * Front and rear parking assistance * Cruise control * Traffic sign recognition * High beam assist 'Light Assist' * Fatigue detection * Crosswind assist * Active lane keeping assist * Intelligent speed assist * With multifunction camera * Wooden floor in cargo compartment with rear loading edge protection * Lashing rails (Airline) in cargo compartment: side walls and partition wall * Entry handle at partition wall in cargo compartment * Side interior paneling in cargo compartment made of plastic up to roof frame * Lashing rings for securing cargo * Cargo compartment distributor package * Comfort

Condition: used, mileage: 329,500 km, power: 235 kW (319.51 HP), first registration: 11/2005, fuel type: diesel, empty load weight: 12,320 kg, maximum load weight: 5,680 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, with superstructure, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, differential lock, fog lights, long-range headlights, work lights, rotating beacon, storage compartment, leaf spring suspension, trailer hitch with air and light connections, aluminum tank, low-noise G1, winter service equipment, lashing eyes, U-protection, swing-out flaps, sunroof, crane behind the cab, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, 3x hydraulic outriggers, yellow environmental badge. Wheelbase: 3900 mm, Superstructure: Meiller 3-sided tipper with aluminum sideboards, Crane: Palfinger PK 12000 B with radio remote control, OLD TACHOGRAPH! Differential lock front axle, 9-ton front axle, rear axle H7 13t, ring gear 300, Telligent braking system with ABS, ABS can be deactivated, drum brake on front and rear axle, stabilizer rear axle, steel bumper, parameterizable special module (PSM), distributor cockpit, pre-equipment for toll collection, construction site filter, reversing warning, auxiliary drive input shaft MB 2c, rear engine output, torque 600 Nm. Njdpfx Amsy N Tb Hsnjct Load chart: 4.5m - 2420kg, 6.1m - 1720kg, 8.1m - 1260kg, 10.2m - 980kg. Suitable salt spreader -9923- available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Year of construction: 2000, condition: good (used), Used Edward Pearson pr6 250ton x 4metre multi axis cnc pressbrake for sale Pr6 250/4100 Make: Edwards Pearson Model: PR6 Year / new: 2000 Total axis:7 – 5axis back gauge X R Z1 Z2 X1 – recently replaced / new amplifiers Last service 2 weeks ago – 04/06/21 New hydraulic manifold fitted Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 250ton Cnc control: Cybelec DNC 900 Fully serviced with Bystronic uk – as attached per photo Ncodpfx Amsgxf Sdjnst Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with tuition with your operators can be arranged.

Condition: used, mileage: 84,598 km, power: 315 kW (428.28 HP), first registration: 01/2015, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * ABS * ASR (traction control) * Radio * On-board computer Ncodpfsy Nuk Aox Amnst * Reversing warning system * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Roof hatch * Rear window * Comfort driver's seat * Seat heating * Longitudinal and cross locks * Off-road driving program * AP axles * 12-speed * Suspension: leaf springs * Payload: 11,500 kg * Retarder: engine brake ----Superstructure: Liebherr concrete mixer HTM 704, capacity 7,000 ltr, 650 ltr water tank, 60 ltr dosing system. Putzmeister concrete pump Pumi 24-3.67 Q, 3-section, Z-fold, 3 arms, distributor boom TMM 24-3, max. vertical reach 24 m, max. horizontal reach 20 m, max. depth reach 12.4 m, unfolding height approx. 6.8 m, end hose length: 3 m, pump delivery line (pipe-DN) 125, max. delivery rate 60 m³/h, radio remote control + cable remote control, fully hydraulic 4-point outrigger system, HD water pump. Recorded operating hours: 1,435 h ----Tinted windscreen. Last service carried out by DB at 82,000 km! Sale to trade customers only. FOR EXPORT ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see legal notice).

Condition: used, functionality: unexamined, Jensen rotary distributor with 3 additional inputs For Ncsdpfxjy Uh Ifo Amnot Bauch washing machine

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner Nedpfxeyrd U Uj Amnect - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: new, maximum load weight: 31,480 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 35 m³, Equipment: ABS, New vehicle - Available immediately! For sale, lease, or lease with option to purchase upon request! GRW - VAN HOOL 35m³ Horizontal Cement Silo - NEW----* Manufacturer: GRW / VAN HOOL * Type: Cement Silo * First registered: - (New vehicle) * Color: Chassis RAL 7024 Graphite Gray, Container RAL 9001 Cream White * Volume: 35m³ / 1 Chamber * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 4,520 kg * Payload: 31,480 kg * Axles: 3x SAF axles / disc brakes * Tires: 385/65 R22.5 NEW / Alcoa aluminum rims * Suspension: Air suspension * ABS / EBS * 2 bar pressure tank * Operating temperature from -40°C to +80°C * 1 chamber Ncsdpfswaqhlox Amnst * 2 dome covers * 4" pinch valves * 4" central outlet to the rear * 1x DN65 aluminum pipe (painted) runs on the right side from the main air supply to the distributor * 1x DN65 upper air hose line * 2x hose pipe boxes left and right (5m) * Fluidization mats * 1,185mm fifth wheel height * Aluminum chassis * Aluminum walkway with access to the rear left * Single fender * Full load supports * Toolbox * Aluminum air tank * Loading pressure gauge * LED work lights * LED reversing lights * Reverse alarm New vehicle - Available immediately! For sale, rent, or lease with option to purchase upon request! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or information. We assume no liability for errors, changes, or prior sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Linde / Bitzer | Triple-Compressor Industrial Chiller Technical specifications of the frame: Unit manufacturer: Linde Aktiengesellschaft Model / Type: VHM 316-4521 Serial number: 10309 Year of manufacture: 1993 Refrigerant: R22 Allowable working pressure: 25 / 13 bar Overall dimensions of the frame: 2930 × 830 × 1870 mm Specifications of the installed compressors (3x Bitzer Kühlmaschinenbau GmbH): Power supply: 380–420 V (50 Hz) / 440–480 V (60 Hz) – 3 phases Maximum operating current: 24 A (per compressor) Volumetric capacity per unit: 42.3 m³/h (for 50 Hz) / 51.0 m³/h (for 60 Hz) Total volumetric capacity of the unit: 126.9 m³/h (for 50 Hz) / 153.0 m³/h (for 60 Hz) Protection class: IP 54 List of compressors in the section: Compressor no. 1: Type S4G-12.2 Y Serial number: 15851279 Nodey Ub A Njpfx Amnect Compressor no. 2: Type S4G-12.2-40P Serial number: 1676905728 Compressor no. 3: Type S4G-12.2-40P Serial number: 1678210359 Industrial central multi-compressor unit (so-called "compressor pack") built by the German Linde Group based on three two-stage, semi-hermetic Bitzer reciprocating compressors from the S4G series. This type of system is designed to power low-temperature installations – freezers, freezing tunnels, and advanced refrigeration systems in food processing plants (meat, fish, bakery). The design based on three identical units allows for very flexible, three-stage cooling capacity management (in steps of 33%). The system automatically activates the appropriate number of compressors depending on the actual thermal load, which optimizes energy consumption and extends the service life of the components. The entire unit is mounted on a compact support frame, which facilitates installation. Key features: - Reliable Bitzer two-stage compressors: The two-stage compressor series is specifically designed for deep freezing. It ensures stable operation at very low evaporation temperatures and is characterized by a high energy efficiency ratio. - Safety and automation of the Linde frame: The industrial design of the frame integrates a common suction and discharge manifold, an advanced oil equalization and separation system, and the necessary control and measuring equipment (protective pressure switches), which effectively protects the system from failures. - Industrial protection class (IP 54): Hermetic electrical boxes and the compressor design protect the system from moisture and dust, allowing for safe operation in harsh machine room conditions. - Application versatility: The unit is factory-designed to operate with R22 refrigerant. Due to the presence of compressors with the "Y" designation (filled with ester oil), the system can be successfully adapted to work with modern, environmentally friendly alternatives from the HFC group (e.g., R448A / R449A / R404A / R507) after a standard verification of seals and automation settings.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Arco | Multi-compressor refrigeration unit / Compressor on Bitzer components Unit manufacturer: Arco Model / Type: R404A-SL32 Serial number: 001760 Date of manufacture: 03.10.2000 Refrigerant: R404A Overall frame dimensions: 2300 × 1100 × 2050 mm Specifications of installed compressors (2x Bitzer Kühlmaschinenbau GmbH): Compressor No. 1: Type: 6F-40.2 Y Serial number: 15850136 Volumetric capacity: 151.6 / 181.9 m³/h (for 50 / 60 Hz) Compressor No. 2: Type: 6GE-34Y-40P Serial number: 1606614761 Volumetric capacity: 127 / 153 m³/h (for 50 / 60 Hz) Industrial, central multi-compressor unit manufactured by Arco based on reliable, semi-hermetic reciprocating compressors from the renowned German brand Bitzer. The unit is designed to power extensive refrigeration systems (both medium- and low-temperature) in food processing plants, meat processing facilities, cold storage warehouses, and distribution centers. The system, based on two powerful compressors with a total volumetric capacity exceeding 300 m³/h, allows for flexible management of cooling power depending on the current thermal load of the system. The design on a common, rigid frame significantly facilitates installation in the machine room and ongoing maintenance. Key features: - Bitzer reliability: The use of semi-hermetic reciprocating compressors guarantees the highest energy efficiency, long service life, and easy access to spare parts and service. - High flexibility and efficiency: Two independent performance stages allow for smooth or stepped adjustment of the unit's operation, which generates significant electricity savings under variable temperature conditions in production. Nodpfjy Uay Hox Amnect - Industrial frame construction: Arco's design integrates the necessary safety and automation elements (pressure switches, suction and discharge manifolds, oil separation systems), which ensures stable operation and protects the compressors from liquid hammer. - Versatility: The unit is factory-prepared to operate with the popular and efficient refrigerant R404A (or its modern, low-GWP alternatives after oil verification).

Condition: new, mileage: 100 km, power: 175 kW (237.93 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 3,850 kg, overall weight: 8,550 kg, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 4, emission class: euro6, suspension: steel, number of seats: 3, Year of construction: 2025, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, differential lock, fog lights, non-smoking vehicle, power assisted steering, start-stop system, tachograph, traction control, trailer coupling, Mitsubishi Fuso Canter 9C18 Hooklift KING 6T – NEW VEHICLE – AVAILABLE IMMEDIATELY Vehicle Data: Model: Mitsubishi Fuso Canter Hooklift KING 6T Type: 9C18 AMT Power: 129 kW (175 HP) Wheelbase: 3,400 mm Gross Vehicle Weight: 8,550 kg Transmission: Automatic (AMT) Condition: New vehicle Chassis & Technology: - Electronic Stability Program (ESP) - Disc brakes front and rear with electronic wear indicator - Stabilizer bars front and rear axle - Reinforced ladder frame Njdpfxoy Svzuo Amnoct - Adjustable steering column (height & tilt) - Multifunction steering wheel - Reinforced battery system (2x 100Ah) Body – Hooklift KING 6T: - Hook system: 90 cm City-System - Length: 3,300 mm - Payload: up to 6,000 kg Body Features: - Internal hydraulic container protection - Hydraulic distributor & hydraulic pump - Oil tank - Wide guide rollers for maximum stability - Stainless steel hook construction - Steel structure shot-blasted and coated with epoxy primer - Marker lights - Work platforms - Work lights + additional spotlights - Rear light frame Your advantages with us: ✅ No hidden costs: - Delivery: €0 - Documents: €0 - COC: €0 - First inspection: €0 ✅ Financing or leasing possible ✅ Immediately available Contact & Location: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany 📞 ONLINE SALES – We are happy to advise you! We speak: 🇩🇪 German 🇬🇧 English 🇷🇺 Russian 🇵🇱 Polish

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 Nodpeyzr Tfofx Amnjct - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 2010, condition: excellent (used), Complete euroblock cheese production line designed for efficient processing of milk into Euroblock cheeses. The system can be easily expanded to produce various sizes of round cheeses with a weight of approximately 4–5 kg. It can process 6.000 liters of milk per batch, up to 4 batches a day. The line exists out of: Njdpjyzxdkefx Amnect Milk reception (by a mobile centrifugal pump) Milk receiving pump from the truck or truck with pump unloaded itself. 1. 2 pieces raw milk storage tanks (refrigerated), 6.000 liter per tank. • Manufacturer: Mueller • Year of make: 2012 • Horizontal, insulated and cooled milk storage tank, cip cleanable. • Cooling compressor Freon 2. Milk reception valves • Valve manifold to automatically send the milk to the selected tank, to pump the milk from the tank into the pasteurizer and to CIP (cleanable). • Set of 4-way butterfly valves with controls. • Manufacturer: GEA – Tuchenhagen 3. Complete pasteurize installation • Manufacturer: C van ’t Riet • Year of make: 1996 • Capacity: 6.000 liter • Complete on a skid. • With Balance tank, pumps, heat exchanger, holding tube, hot water control, valve interconnecting piping. Control system with temperature recorder. • In 4-65/75°C Holding tube -> 25/35°C cheese-making temperature. 4. Buffer tank for pasteurized milk 6.500 liter. • Manufacturer: Zero • Top insulated • Function: To store/ buffer warm milk so that the pasteurizer can continue running and two batches can be processed more quickly directly after each other. 5. Cheese vat • Manufacturer: Damrow (Gea) Double 'O' • Volume: 6.000 liter per batch • Closed cheesevat with whey extraction sieve from above. • Self-priming pump for cip and whey. • Placed on a stainless-steel frame for a free fall to the drainage tank. • Separate control system. • Valve manifold (Tuchenhagen) for importing milk from a pasteurizer or buffer tank, valved design so buffertank can independently be cleanded. 6. Automatic prepressing and cutting vat • Manufacturer: C van ’t Riet • Year of make: 2010 • Including CIP-pump • Capacity of the curd mixture 6.000-liter vat (for curd processing) • Transfer from curd vat: by gravity • Number of cheeses from 6000 liter: 42 cheeses of 15 kg (approximately) 7. Pressing system • Tunnel press, 42 positions for euroblock. • Pall lane system by pneumatic cylinders to convey the moulds automatic in and out of the press. With controls and press program. 8. Moulds • Micro-perforated LAUDE moulds, 15 kg euroblock. • Molds have been partially replaced and are only a few years old. 9. Mould washing • 2 pieces of mould washing bassins 10. Brine • 8 pieces brine cages/racks (without brine boxes, those are cast in concrete) • 2 pieces brine cooling compressor and tanks (on top) 11. Whey tank • Horizontal whey tank (+/- 7.000-liter capacity) 12. CIP-system (fully automatic Siemens S7) • Consisting one tank with three compartments • Heat exchanger • Automatic valves • CIP pressure pump • The entire pre-factory has a fully automatic CIP and automatic control CPU Siemens S7 (support from the original supplier is possible/delivered by Gea)