Used Crosscut, Miter And Schiftersãƒâ¤Ge for sale (15,355)

Year of construction: 2016, condition: excellent (used), This system was used to sort and convey small brushes. Fgsdpfx Aashit Rws Eof It is in very good condition and has seen little use. There are two such systems available.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Fsdpjfdkb Tefx Aa Eegf - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Fgodpod Tbbdjfx Aa Esf Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface Fgedpfxsd Tqalo Aa Ejf - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Fgjdpfxsfdkb Ue Aa Eef Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) Fgodpfxsguk A He Aa Eof - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. Fjdpfsguk Dksx Aa Ejgf We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Fgedpfxofdkbhs Aa Eof Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Fedpfsqt Dmyox Aa Esgf Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Fgedpoguk Dvefx Aa Eef Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: new, Year of construction: 2025, 20ft storage container – available immediately! ✔ As good as new ✔ Windproof & waterproof ✔ Rubber seals, wooden floor, ventilation ✔ With CSC sticker – also suitable for transport Dimensions & details: • Exterior: 6,058 x 2,438 x 2,591 mm • Interior: 5,898 x 2,350 x 2,390 mm Fgodpog S Adzsfx Aa Ejf • Door opening: 2,343 mm • Volume: 33 m³ • Weight: 2.25 t / Payload: 30 t 💡 Very sturdy construction with steel walls (2 mm) 💡 Floor with forklift pockets 💡 4x door bolts, 4x ventilation slots 📬 Enquire now – we will prepare a suitable offer! 👀 Other container sizes available.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel tank capacity: 15 l, color: grey, empty load weight: 1,200 kg, shovel volume: 0.3 m³, Year of construction: 2025, operating hours: 1 h, The YAMA S15 LITE crawler excavator – modern, professional, and durable. The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, and renovation companies as well as service providers in similar sectors. The YAMA S15 LITE is also equipped with a swing boom, significantly facilitating work in confined spaces. We also offer post-warranty service support. The mini excavators are designed and manufactured under the supervision of European engineers. The robust construction ensures reliable operation under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Bucket volume (set with 3 buckets): 0.03 m³ Engine model: LAIDONG Engine power: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: No Max. gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Max. travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Fgodjwzh A Nopfx Aa Eef Ground pressure: 30 kPa Fuel tank capacity: 15 l DIMENSIONS: Overall length: 2,870 mm Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Track gauge: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach at ground level: 2,400 mm Minimum swing radius: 1,550 mm Max. digging radius at ground level: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross

Condition: new, functionality: fully functional, color: yellow, empty load weight: 990 kg, Year of construction: 2025, operating hours: 1 h, Now only €6,500!! BAGGER 1000 – professional and durable. The BAGGER 1000 model is the perfect equipment for the most demanding construction, electrical, hydraulic, repair, and service companies in related industries. We also guarantee equipment servicing after the warranty period has expired. Our mini excavators are manufactured under the supervision of European technicians. The equipment is built on a robust structure and can operate under all conditions. TECHNICAL DATA: - Weight: 990 kg - Engine: Koop - Number of cylinders: 1 - Euro 5 - Oil cooler: YES - Maximum speed: 1.3 km/h - Maximum climbing ability: 30° - Pump type: gear pump Fgodpfjw Ufraox Aa Eef WORKING RANGE: - Maximum digging reach at ground level: 2850 mm - Maximum digging depth: 1650 mm - Maximum dump height: 2610 mm - Maximum unloading height: 1850 mm - Maximum vertical digging depth: 1375 mm - Blade lift height above ground: 345 mm - Blade lowering depth: 255 mm DIMENSIONS: - Overall length: 2300 mm - Overall height: 2300 mm - Overall width: 930 mm PRICE: net €6,500 gross €7,735 - INCLUDES 3 excavator buckets (20, 40, 80 cm) - For machines regularly maintained by us, we extend the warranty to three years (warranty valid exclusively for machines purchased directly from us – not from other dealers). - FREE 12-month WARRANTY – after this period, we supply all original parts if required! - We operate our own mobile service, reaching all our customers in Germany and beyond. - FREE delivery within a 200 km radius - VAT-free sales possible (with EU VAT number only) - FINANCING is available. KINGWAY DEUTSCHLAND e.K. is the only authorized stationary dealer for the Kingway brand in Germany. Only with us can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a wide selection of machines in stock – approximately 70 models are always available. We deliver machines to all of Germany, Austria, Switzerland, Italy, and other neighboring countries. In addition, we provide our customers with unrestricted access to all spare parts. Make an appointment and come for a test drive!

Condition: new, functionality: fully functional, power: 7.35 kW (9.99 HP), color: yellow, empty load weight: 1,000 kg, shovel volume: 0.2 m³, Year of construction: 2025, 3-YEAR WARRANTY!! Modern Mini Excavator JOKER RS – professional grade and built to last. The JOKER RS model is the ideal equipment for demanding construction, electrical, plumbing, renovation, and service companies in related industries. The JOKER RS is additionally equipped with a swing boom, significantly facilitating work in confined spaces. We also guarantee service for the equipment after the warranty period has expired. The mini excavators are manufactured under the supervision of European technicians. The machine features a robust design and can be used in all conditions. TECHNICAL DATA: - Operating weight: 1000 kg - Bucket capacity: 0.02 m³ - Engine: Koop - Number of cylinders: 1 cylinder - Power / RPM: 10 hp at 3000 rpm - Maximum torque: 23.8 Nm at 3000 rpm - Maximum digging reach at ground level: 2890 mm - Maximum digging reach: 2940 mm - Maximum digging depth: 1650 mm - Maximum dumping height: 2600 mm - Maximum discharge height: 1970 mm - Maximum vertical digging depth: 1320 mm - Blade lift above ground: 325 mm - Blade drop below ground: 175 mm - Hydraulic lines for: hammer, auger Fgedow Ufr Hjpfx Aa Eef DIMENSIONS: - Wheelbase: 910 mm - Track length: 1235 mm - Machine width: 930 mm - Track width: 180 mm - Track height: 320 mm - Total length: 2310 mm - Total height: 2195 mm PRICE: €6,302 net €7,500 gross - INCLUDES 3 digging buckets (20 cm, 40 cm, 80 cm) - For machines that are regularly serviced by us, we extend the warranty to three years (Warranty only applies to machines purchased directly from us—not from other dealers) - FREE 12-month WARRANTY – after this period, we supply all original parts as needed! - We offer our own mobile service reaching all our customers in Germany and beyond - FREE delivery within a 200 km radius - SALE POSSIBLE EXCLUDING VAT (with valid VAT ID only) - FINANCING available KINGWAY DEUTSCHLAND e.K. is the exclusive stationary distributor of the Kingway brand in Germany. Only with us can you view and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe as well as the main office of Kingway in Germany. We keep a large selection of machines in stock—around 70 models always available. We supply machinery across Germany, Austria, Switzerland, Italy, and other neighboring countries. Customers enjoy full access to all spare parts. Schedule an appointment and come for a test drive!

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, empty load weight: 2,700 kg, Year of construction: 2025, The modern VIP27 mini excavator is a professional, durable machine. The VIP27 model is the ideal choice for demanding construction, electrical, plumbing, renovation companies, as well as service providers in related industries. The VIP27 is additionally equipped with a swing boom, significantly facilitating work on confined job sites. The machine is also fitted with extendable tracks, ensuring improved stability and flexibility. We offer reliable after-sales support. The mini excavators are manufactured based on and under the supervision of European engineers. The machine is built on a robust chassis and is suitable for use under all conditions. TECHNICAL DATA: Model: VIP 27 Operating weight: 2,700 kg Bucket capacity: 20, 40, 100 liters Fedpfx Asw Ufwvsa Eegf Engine model: YANMAR Engine power: 15 kW Number of cylinders: 3 Oil cooler: Yes Swing boom: Yes Extendable rubber tracks: Yes (1.3 m–1.5 m) Max. gradeability: 30% Pump type: Piston pump Hydraulic pressure: 20.6 MPa Hydraulic oil flow: 36 l/min Travel speed: 2.6 / 4.5 km/h Slew speed: 9.5 rpm Max. digging force: 19.5 kN Tank capacity: 26 l DIMENSIONS: Overall width: 1,500 mm Overall height: 2,450 mm Overall length: 3,200 mm WORKING RANGE: Max. digging depth: 2,430 mm Max. dumping height: 2,610 mm Max. digging reach: 4,136 mm Max. ground reach: 4,100 mm Minimum swing radius: 750 mm 2-speed travel Heater Radio Fan PRICE: €21,000 net €24,990 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge stock of machines, with around 100 available at any given time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: like new (used), Year of construction: 2009, Saw for wood bundles Fjdpfxsx Sqfzo Aa Eogf

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Fodpfoq Nf Enox Aa Ejgf Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Fgodpfxenxi Uuo Aa Eef Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Fsdpfxenxi R Us Aa Ejgf Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: used, axle configuration: 3 axles, first registration: 11/2012, loading space length: 13,500 mm, loading space width: 2,450 mm, loading space height: 2,810 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 1,330 mm, Year of construction: 2012, Equipment: tail-lift, Suspension: air suspension Rear axle 1: Tyre size: 265/70R19,5; Double wheels Rear axle 2: Tyre size: 265/70R19,5; Double wheels Rear axle 3: Tyre size: 275/70R19,5; Double wheels Drive: Wheel Empty weight: 11.980 kg Carrying capacity: 26.020 kg GVW: 38.000 kg Make of bodywork: LECITRAILER = Additional options and accessories = Fgedpsztphuofx Aa Eef - Spare wheel

Condition: used, this listing is for Cytiva Axichrom 100/500 chromatography column Fgedpfozqf E Rox Aa Eof the unit is in full working condition and ready for immediate use This pilot-scale column features automated axial compression for repeatable bioprocessing and downstream purification. Transparency report and technical audit: Software and media disclosure: as a direct-from-lab asset, any original software media or accessories found with the unit are included as a courtesy. licensing notice: we do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for procurement: This unit is sold as-is. while we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. ideal for labs with in-house technical expertise or existing service agreements. Sustainability impact: By choosing direct reuse, your facility avoids the carbon footprint of new manufacturing

Condition: ready for operation (used), Siemens 6AV7861-3TB00-0AA0 Simatic Flat Panel 19" Touch Industrial Monitor, SN: LBW1004945, Serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgedpfxoi Edd Ue Aa Eof

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch, DC 24V Industrial Power Supply, SN: VPC3857694, Serial No. as shown in the photo, used – in excellent condition, 100% functional, scope of delivery as shown in the photos. Fjdpfoi Edhbjx Aa Eegf

Condition: ready for operation (used), Siemens 6EV3054-0DC, installation-ready power supply unit, type E, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Fsdpfx Aji Edvwja Ejgf

Condition: ready for operation (used), Siemens 6AV7894-0BH32-0AC0 Simatic HMI IPC677C (Panel PC) 19" Touch Industrial PC, SN: VPC0851816, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgodpfji Edhijx Aa Eef