Used Cronosstech Shsb 4R 25-400 for sale (30,289)

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm Hjdpfx Aceb Uhnajkonk -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 25 mm -Type: E0400180H20025 E0400180H2/0025 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 240 mm -Hole: Hole Ø 20 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 240/50/H68 mm -Weight: 2.4 kg/piece Hnodpfxefuw Iro Ackek

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 400 x 250 mm -Y-axis: 95 mm movable, hand crank with fine adjustment, see photos Hnedpfxsqddi Aj Ackjk -T grooves: groove width 16 mm, groove spacing 63 mm -Total dimensions: 455/400/H140 mm -Weight: 40 kg

Condition: used, Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm Hedpfxjb Uhmte Ackonk -Weight: 5.1 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm Hnjdpjb Uhm Ssfx Ackok -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system Currently 6 identical machines available External dimensions: Height 4889 mm Width 2785 mm Depth 2810 mm Total machine load capacity up to 2 x 15,000 kg 63 beams with center bar for up to 400 kg load each In the clear usable dimensions: W = 2460 mm D = 825 mm Hedpod Sphiefx Ackenk Usable height up to 55 to 750 mm Start of the service opening 875 mm above the top floor, then 875 mm high Motor ratings Vertical drive 6 kW / 400 volts Horizontal drive 0.55 kW / 400 volts Color: gray/blue Surface cleaned, signs of wear possible Subject to change Errors and technical changes or deviations in details in photos, delivery, and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: ready for operation (used), Bosch PSU 5100.111W / 1070079215 frequency converter SN: 002809025 - U AC 400 - 480V / 110A, used, in good condition, 100% functional, delivery scope as per photos. Hnodpfxox Eqx Ij Ackjk

Condition: ready for operation (used), Schneider Electric ELAU PacDrive MC-4/11/22/400 SN: 2228230252, used, in good condition, 100% functional, delivery as per photos. Hodpfx Acox Eucdekenk

Condition: ready for operation (used), Heidenhain RON 255 - 18000 N4 . 288 400 33 SN: 4528064D, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Hodpfxsx Dwxve Ackonk

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, Distance between columns 2.750 mm, Distance top of table to spindle nose 1.600 mm, fixed cross rail, 2 tables 2.500 x 4.000 mm, coupled 2.500 x 8.700 mm, power 58 kW, revs 1 – 1.800 rpm, base speed 136 rpm, max. torque 3.500 Nm, feeds and rapids 1 – 10.000 mm/min, traverses x y z 9.502 x 5.515 x 1.000 mm, quill movement 500 mm in 4 steps, automatic tool changer with 60 pockets, automatic mounting, 4 x 90° indexing and heel clearance for RAA Electric and mechanic remanufacturing in 2017 with • New CNC control SINUMERIK 840 D or at your choice • New electric cabinet Hnodpodkmihefx Ackok • New wiring • New motors for all axis and main spindle • New measuring system HEIDENHAIN LB 382 • Milling carriage general overhauled • New painting

Condition: good (used), Vöest-Alpine Jaw Crusher . Type: STE 4025 K . Hnedpjmnq Dqefx Ackjk Mach. No.: 70310010 . 400 x 250 mm. . With Electrical motor.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3750x1400x1750 mm Hjdpev A Huhefx Ackjnk Weight 1600 kg Total power requirement 8 kw

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed! Hnsdpjlpadyjfx Ackjk

Condition: excellent (used), 1.- Plate size Ø 400 mm Hsdpfx Aehq Ukljckjnk 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR

Condition: new, sheet thickness: 20bending length: 2600upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Hodpfxed Ab R Aj Ackonk Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.200,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: excellent (used), Year of construction: 2009, operating hours: 3,645 h, clamping force: 2,500 kN, screw diameter: 35 mm, Arburg 1500T 2500-400/400/290 3K injection molding machine (235) Number: 235 Availability: in stock Year of production: 2009 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35, 40 Closing force [kN]: 2500 Hnedpfxsw Hx Uyj Ackek Plate size [mm]: 1500 Working hours [h]: 3645 Weight [kg]: 11200

Condition: used, mileage: 17,845 km, power: 177 kW (240.65 HP), first registration: 05/1993, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,090 mm, Equipment: ABS, all wheel drive, complete with load: hydraulic rescue kit shears/spreader, power generator 5kVA and much more +++ extremely clean vehicle with only 17,845 km on the clock +++ ready for immediate use Water tank 2360l, rear pump FP 16/8 All-wheel drive 4x4 with 2x differential locks in the middle and rear, ABS, special signaling system fresh inspection including greasing and new fuel filter as well as new air dryer cartridge completed +++ Subject to errors, changes and prior sale Hjdpfx Acsrciadokenk

Condition: new, sheet thickness: 8bending length: 2600upper roll diameter: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Hnjdpod Ab Sfofx Ackjk We have many references!

Condition: new, sheet thickness: 50bending length: 2600upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: Hnjdpfx Acjd Ab Rasksk - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.750,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 13bending length: 2550upper roll diameter: 270sheet length: 2550 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.690,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Hedpfx Aed Ab R Tsckjnk We have many references!

Condition: new, sheet thickness: 25bending length: 4100upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll Hnodpfx Acod Ab Rdjksk - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 30bending length: 2600upper roll diameter: 390 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.450,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system Hnsdpfjd Ab Rrsx Ackok - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 25bending length: 2600upper roll diameter: 360 Technical specifications: - Hardened and polished rolls Hnedpfjd Ab Rwjx Ackjk - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.200,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 25bending length: 2100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine Hodpfxsd Ab R Do Ackjnk - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 8.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 16bending length: 2600upper roll diameter: 300 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Hodpod Ab R Iofx Ackjnk Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 8.250,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!