Used Cormak Ts250C 400V for sale (2,846)

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Nedpfeycqhcjx Ad Ajcr Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Njdsxnyhujpfx Ad Ascr Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift Ncsdpfx Ajyw Ua Tjd Ajr - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Digital Signal Processing Digital signal processing. A plotter with a working area of 1220x1230 ensures smooth operation of the device and accuracy in processing. The memory built into the controller allows the machine to work without the need to load the program each time. very quiet operation and guaranteeing increased durability. The Premium version meets the expectations of individualists as well as companies with a lot of orders. For each machine, training is included in the price at our headquarters! Technical parameters Ncjdpfxeiz Avvs Ad Ajr Spindle 3.7kW / 18000 rpm. inverter, air-cooled Workspace 1230x1220x210mm Control DSP Software resolution 0.001mm Power 400V Weight 450kg Machine dimensions 2000x1800x1640mm Table height 715mm Guides linear Transfer toothed rack (Z axis - ball screw) ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Equipment Leveling Feet, snake, clamps, screws, keys, 2 boxes of cutters, 1/8, 1/2 and 5-6 mm collets The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Ncodey En E Sjpfx Ad Aor Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm Ncedpfxjudim De Ad Aer -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Ncjdpfxemrp Tlo Ad Aor Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90–45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 410 mm Maximum thicknesser width 408 mm Maximum planing height 5–225 mm Maximum thicknesser machining depth 3.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Planer table dimensions (L×W) 1640×410 mm Nsdjvxh T Dspfx Ad Aocr Weight 280 kg Motor speed 2800 rpm Motor power s1 4.0 kW s6 5.6 kW Power supply 3-phase, 400V

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90 – 45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 310 mm Maximum thicknesser width 308 mm Maximum planing height 5–225 mm Maximum thicknesser machining depth 2.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Planer table dimensions (L×W) 1300×310 mm Weight 250 kg Motor speed 2800 rpm Motor power s1 3.0 kW s6 4.2 kW Power supply 3-phase, 400V Ncodpjvxh Rvefx Ad Aer

Condition: new, Year of construction: 2026, Thickness and Surface Planer CORMAK PT310ECO with Cutter Block – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer‑thicknesser engineered for high-quality finish, reliability, and low noise levels. Thanks to its cutter block, it is an advanced woodworking machine combining jointing and thickness functionality in a single robust structure. The stable build and powerful motor make it a versatile solution for professional woodworking—ideal for both carpentry shops and artisan workshops. Key Machine Advantages Cutter-block shaft – three HSS knives 310 × 25 × 3 mm ensure long service life, precise planing, and reduced noise. Massive work tables – cast iron construction minimizes vibration and ensures stable material feed. High power – motor rated at 2.2 kW (S1) / 2.6 kW (S6) provides consistent performance even under heavy loads. Large working area – 310 mm width and up to 180 mm thickness capacity accommodate various workpieces. Efficient chip extraction – Ø100 mm port enables seamless connection to a dust‑extraction system. Construction and Technology The PT310ECO is equipped with a 75 mm diameter cutter block that ensures smooth operation and superior durability compared to conventional knives. The planer/thicknesser features cast‑iron tables sized 1290 × 310 mm (surface planer) and 540 × 310 mm (thicknesser), both highly wear‑resistant. Additionally, the machine offers fence angle adjustment from 90° to 45°, enabling precise angled milling. Precision and Performance Maximum planing depth Jointing mode: 3 mm Thicknessing mode: 4 mm Cutter-block rotational speed: 5,500 rpm Stable structure enables finishes ready for gluing, coating, or further processing. A reliable thicknesser for both serial production and smaller‑scale projects. Applications Ideal for: Ncodpfx Adsw Ab Twe Ajr Professional carpentry and furniture workshops Prototyping labs and training centers Maintenance departments in industrial plants Technical schools and vocational institutions Standard Equipment Three‑knife cutter block Cast‑iron work tables Cutter head guard Ø100 mm chip extraction port Feed‑in switch and safety shutdown Optional Equipment Mobile trolley for the machine Chip‑extraction unit Technical Data Specification Value Surface‑planing table size 1,290 × 310 mm Thicknessing table size 540 × 310 mm Cutter-block diameter 75 mm Cutter-block speed 5,500 rpm Number/dimensions of knives 3 knives / 310 × 25 × 2.5 mm Fence angle adjustment 90°–45° Chip outlet diameter 100 mm Max. thicknessing height 180 mm Max. cut depth: planing/thickness 3 mm / 4 mm Motor power (S1/S6) 2.2 kW / 2.6 kW Max. workpiece width 310 mm Gross weight 200 kg

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. Nsdevxh A Sspfx Ad Ascr The latest version of the machine with an innovative tabletop opening system: Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Shaft length 250 mm Knife dimensions 250x30x3 mm Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V

Condition: new, Year of construction: 2026, The CORMAK PT310ET planer–thicknesser is an advanced woodworking machine that combines the functionality of a jointer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and features that increase precision and operator comfort, such as additional feed rollers integrated into the thicknessing table. Key Advantages S6 motor power: 2.8 kW (S1: 2.2 kW) – one of the most powerful in its class, ensuring consistent performance even under heavy loads. Stable 180 kg construction – rigid cast-iron tables and additional rubber-coated feet minimize vibrations and increase precision. Quick mode switching – fast change from jointer to thicknesser by lifting the tables and repositioning the chip-extraction hood. Smooth and quiet operation – low noise emission and accurate material feed ensure operator comfort and safety. Efficient extraction system – Ø120 mm outlet allows effective chip removal, especially during intensive use. Unique Benefit: Feed Rollers in the Thicknesser – specially designed auxiliary roller extensions integrated into the thicknessing table support the machining of long and heavy workpieces, making feeding and collecting easier while improving surface finish quality. Applications Ncjdpjxy Hy Uefx Ad Asr Carpentry and furniture workshops – for daily, efficient machining of solid wood and laminated boards. Production of structural components – ideal for flattening and calibrating construction elements, stairs, frames, and mouldings. Technical schools – for training in professional woodworking using high-quality industrial equipment. Standard Equipment Three HSS knives, 310 × 25 × 3 mm Cutterhead guard Cast-iron jointer tables Ø120 mm dust-extraction outlet Feed switch and emergency STOP switch Operating manual (DTR) CE declaration of conformity Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 5500 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives / dimensions: 3 / 310 × 25 × 3 mm Maximum jointer width: 310 mm Maximum thicknesser width: 308 mm Planing height range: 5–225 mm Maximum depth of cut (thicknesser): 2.5 mm Maximum depth of cut (jointer): 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L × W): 1300 × 310 mm Gross weight: 180 kg Motor speed: 2800 rpm Motor power: S1: 2.2 kW / S6: 2.8 kW Power supply: 400 V, 5-pin socket, 16 A Manual (DTR): Polish/ English CE declaration: yes

Condition: new, functionality: fully functional, Year of construction: 2026, The FM230 extractor is characterized by small dimensions and at the same time high efficiency of up to 1000 m3/h. Standardly equipped with a metal rotor and a running base. Great value for money, which makes it an uncompromising device in its category. Many years of effort by our team resulted in the creation of a multi-patch metal impeller of the WhirlWind series, which, together with the massive metal casing, constitutes the heart of the extraction system. The vacuum air draft perfectly sucks excess sawdust generated during mechanical processing of wood, produced during machine operation. The massive construction of the extraction unit has been enriched with additional supports in the base to ensure stable and vibration-free operation of the device. The entire structure has been reinforced with appropriately thick supports that keep the chute cylinders and the weight of waste bags in the right position on a massive base. An additional advantage is the use of a flexible and durable gasket placed in a critical place to improve the tightness of the entire system. As standard, we equip the extractors with canvas bags (filter and waste) and additional disposable, durable plastic waste bags. Flexible metal bands ensure long-term trouble-free operation of bag replacement. The use of swivel and ball-bearing wheels ensures efficient movement of the extractor around the facility. Machine characteristics The perfect machine for both professionals and amateur carpenters. Optimum extraction performance works perfectly with machines such as: Planers Planers Thickness planers Milling machines Technical data ENGINE POWER 0.75 kW SUCTION PERFORMANCE 1000 m3/h VOLUME OF BAGS 60L NUMBER OF BAGS 2 Ncodpfovu Az Ujx Ad Aor DIAMETER OF SUCTION PIPE 100mm HEIGHT 1500mm WIDTH 420mm LENGTH 600mm VOLTAGE/FREQUENCY 230V WEIGHT 27kg

Condition: new, Year of construction: 2026, functionality: fully functional, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Ncodpfx Aevu A Dijd Asr Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Default equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction efficiency 3900 m3/h Bag capacity 220 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1200×570×2250 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace Njdsvu Ad Aopfx Ad Aecr 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg

Condition: new, Year of construction: 2026, functionality: fully functional, New, FM230-L1 low-noise vacuum extractor. Large design and powerful vacuum allows for removing sawdust and chips from machines and floors. Nedovu A Eaopfx Ad Ascr Machine features Extractor with a powerful vacuum (horizontal system rotor) Metal, balanced rotor Strengthened motor Workplace vacuuming capability Large bags capacity Wide suction nozzle in the set Portable due to large wheels Ergonomic handle for machine manoeuvring Quiet work, high efficiency Due to its small size it doesn't take a lot of space in the workshop Many years of our team's effort resulted in creating a WhirlWind series multi-wing metal rotor, which, along with the rigid metal body, constitutes the heart of the extractor. Vacuum air-flow perfectly sucks out excess amount of sawdust produced during machining wood. Large design of the extractor is equipped with a solid frame providing stability and vibration-free operation. Entire construction is also strengthened with appropriately thick supports, which hold the cylinders along with the weight of the waste bags in proper position. Another advantage is the usage of an elastic and durable gasket, located in the integral part of the machine in order to improve the tightness of the entire system. By default, our extractors are equipped with burlap (filtering and waste) as well as additional, disposable, durable, plastic waste bags. Elastic metal bands ensure long-term reliable bags replacement. Usage of rotary wheels in bearings provides quick relocation of the machine. Technical data S1 continuous work motor power 0.75 kW Speed 2800 rpm Suction efficiency 1150 m3/h Bags capacity 90 L Number of bags 2 Extracting connector diameter 100 mm Height 1550 mm Width 420 mm Length 800 mm Voltage 230V Weight 27 kg

Condition: new, Year of construction: 2026, functionality: fully functional, A powerful, 2.8 kW and 5000 m3/h efficiency, sawdust extractor. Includes burlap filter bags. Machine description Njdevu Aqpspfx Ad Aocr FM500 sawdust extractor is an efficient device of high vacuum power. Stable metal design and balanced rotor create a machine useful in any workshop. Burlap filter bags with up to 5 micron diameter filtering. Equipped with a splitter which allows up to 4 machines to be connected simultaneously. Maximum efficiency achieved when connected to 3 machines. FM500 features Metal balanced rotor Quick fixture of burlap bags Portable wheeled base Stable, metal design Bag holders High vacuum power Strong, 3-phase motor Capable of connecting up to 4 machines simultaneously Constant suction efficiency Technical data S1 motor power 2.8 kW Voltage 400V / 50Hz Motor rpm 2950 rpm Total dimensions 1525 x 560 x 2460 mm Efficiency 5000 m³/h Vacuum up to 2500Pa Air suction speed up to 31 m/s Filtration bags burlap (II filtration degree) Volume of bags 480L Diameters of connectors 200 mm / 4 x (ø 100 mm) Weight 64 kg

Condition: new, functionality: fully functional, Year of construction: 2026, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Standard equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction off efficiency 3900 m3/h Bag capacity 150 L Ncedjvu Artspfx Ad Aer Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1400×570×1960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: new, Year of construction: 2026, functionality: fully functional, Adjustable extraction for lathes with a wheeled base, ensuring effective extraction of dust and chips. The set includes a 56-liter chip bag and a 230 x 125 mm connector. The perfect choice for professional turners and hobbyists, ensuring a clean and safe workshop. Product characteristics: The sawdust extractor for wood lathes is a reliable tool that guarantees effective extraction of dust and chips when processing materials. Its main feature is the adjustable nozzle, which allows you to precisely adjust the suction to specific needs and working conditions. This allows you to effectively keep the area around the lathe clean, eliminating potential health and safety hazards. The extractor is equipped with a solid base with wheels, which allows it to be easily moved and placed in different places in the workshop. Regardless of whether the machine is used in a fixed location or requires frequent relocation, the extractor will certainly meet your expectations in terms of mobility and comfort of use. Ncjdpfsvu Aprjx Ad Ajr The scope of delivery of the extractor includes a chip bag with a diameter of 380 mm and a length of 530 mm, with a capacity of 56 liters. Thanks to the large capacity of the bag, you can easily work for a long time without having to empty it frequently. Additionally, the set includes an extraction stub with dimensions of 230 mm (length) by 125 mm (height), which ensures reliable and effective connection of the extraction device to the lathe. No matter whether you are a professional turner or a hobbyist, a lathe extraction device with an adjustable spigot and a mobile base will certainly help you keep your workshop clean and ensure safe working conditions. This extract will also work: Planers Planners Thickness gauges Milling machines Banding machines Format saws Technical data ENGINE POWER 0.75kW TENSION 230V / 50Hz WASTE BAG CAPACITY 56 years old SUCCATION PERFORMANCE 1000 m3/h SUCTION PIPE DIAMETER 100 mm FAN DIAMETER 230 mm VACUUM 1030 Pa SOUND PRESSURE LEVEL

Condition: new, functionality: fully functional, Year of construction: 2026, The FM300SN transport fan is a technologically advanced unit designed for extracting sawdust, wood chips, and wood dust in industrial environments. With a 2.2 kW motor and an airflow capacity of 3900 m³/h, the unit performs exceptionally well as a sawdust blower in dust extraction systems, ensuring effective air filtration and purification directly at the source of contamination. Its reliability, high performance, and compatibility with various woodworking machines make it an ideal choice for professional wood processing facilities. Key Advantages 2.2 kW motor – designed for intensive continuous operation High extraction capacity of 3900 m³/h – efficient removal of sawdust, chips, and dust Impeller speed 2950 rpm – optimal airflow with stable operation Universal suction ports – 1 × 150 mm and 3 × 100 mm for connecting multiple machines simultaneously Steel construction – resistant to mechanical damage and adapted for industrial conditions Design and Technology The FM300SN is based on a welded construction made of thick, powder-coated steel, ensuring resistance to impacts, vibration, and heavy-duty use. The aluminum impeller is mounted directly on the motor shaft, providing high efficiency and minimal energy loss. The fan is designed for three-phase 400 V / 50 Hz power supply, ensuring stable operation in industrial facilities without the risk of system overload. The suction port system (3 × 100 mm and 1 × 150 mm) allows multiple machines to be connected simultaneously or enables the use of reducers depending on the dust extraction system requirements. Precision and Performance The FM300SN stands out for its high efficiency in transporting sawdust and dust, even in heavily contaminated environments. Carefully optimized aerodynamic parameters ensure constant airflow, minimizing the risk of blockages within the system. As a result, the fan not only maintains a clean working environment but also extends the service life of connected machines by reducing their exposure to process dust. Applications The FM300SN is designed for environments requiring highly efficient sawdust and chip extraction systems during woodworking operations. It is particularly recommended for: carpentry workshops furniture manufacturing plants production of solid wood panels and components central dust extraction systems in production halls Compatible with machines such as: planers and jointers thickness planers spindle moulders sliding table saws edge banders Standard Equipment powder-coated steel housing three-phase 400 V motor aluminum impeller with direct drive suction ports: 1 × 150 mm and 3 × 100 mm Optional Equipment flexible hoses Ø100 mm, Ø120 mm, Ø150 mm filter bags Technical Specifications Parameter Value Motor power 2.2 kW Speed 2950 rpm Extraction capacity 3900 m³/h Inlet diameter 150 mm / 3 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 440 × 430 × 450 mm Njdpfsvu Amkex Ad Ascr Weight 30 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230A Wood Chip and Dust Extractor + 2.5 m Hose The CORMAK FM230A dust extractor is a high-performance chip extraction fan designed for efficient removal of wood chips, shavings, and wood dust generated during woodworking processes. This compact chip extractor is ideal for carpentry workshops, production facilities, and home workshops where effective dust extraction from workstations is essential. The model is equipped with a flexible extraction hose with a length of 2.5 m, allowing quick connection to woodworking machines such as planers, table saws, milling machines, and thickness planers. Thanks to this, the chip extraction system can be easily positioned anywhere in the workshop, ensuring effective removal of dust and chips directly from the source. The powerful extraction fan generates an airflow of up to 1080 m³/h, ensuring fast and efficient suction of wood chips and dust. The solid construction and metal impeller provide stable operation, high durability, and reliability even during intensive use in a woodworking workshop. The mobile design with transport wheels allows convenient movement of the unit between workstations, while the bag filtration system effectively separates air from wood chips. As a result, the wood dust extraction system helps maintain cleanliness in the workshop and improves both comfort and workplace safety. Key Advantages extraction hose included – 2.5 m Ø100 mm high suction capacity – up to 1080 m³/h efficient fan for chips and wood shavings single-phase motor 0.75 kW / 230 V durable metal impeller mobile construction with transport wheels efficient filtration system for chips and wood dust large waste bag enabling long operating time compact design ideal for woodworking workshops Applications The CORMAK FM230A chip and dust extractor is designed to work with many woodworking machines that require effective dust extraction: jointers and planers thickness planers table saws spindle moulders Nedpfx Adjytn Tdj Aocr wood sanders Thanks to the high airflow performance, the dust and chip extractor effectively removes contaminants generated during woodworking, improving visibility at the workstation and reducing the amount of dust in the air. Standard Equipment CORMAK FM230A dust extractor extraction hose Ø100 mm – 2.5 m filter bag waste collection bag mounting clamps mobile base with wheels Technical Specifications Parameter Value Motor power 0.75 kW Power supply 230 V / 50 Hz Extraction capacity 1080 m³/h Motor speed 2800 rpm Vacuum pressure 1000 Pa Noise level 68 dB Number of bags 2 Suction inlet diameter 100 mm Hose length 2.5 m Bag capacity 90 L Height 1800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 with dust filter is a compact, mobile professional dust extractor designed for efficient removal of chips, dust and sawdust in woodworking workshops. The fine dust filter ensures not only strong suction power but also increased filtration efficiency, improving air quality in the workplace. Main advantages of the machine Performance 1,000 m³/h – ideal for use with medium and small woodworking machines. Dust filter – effectively captures fine particles, including sanding dust. Motor 0.75 kW / 230 V – quiet, energy-efficient operation without the need for three-phase installation. Mobility – four castor wheels allow easy movement around the workshop. Compact design – takes up little space, ideal for small workshops. Design and technology The unit is equipped with a metal chip extraction fan ensuring long service life and reliability. The high-quality dust filter effectively separates fine particles from the air stream, reducing workshop dust levels. The solid, powder-coated housing protects internal components, while the sealed suction system prevents pressure loss. Ncsdpfx Aeycucksd Aer Precision and efficiency The CORMAK FM230 woodworking extractor provides stable and consistent suction. With an output of 1,000 m³/h and low power consumption, it efficiently serves a single woodworking machine without interruptions. The fine particle filter also makes it an excellent dust extractor for sanding applications. Applications Small and medium-sized joinery workshops Craft and production facilities Technical schools and training workshops Home and hobby workshops The FM230 works perfectly with milling machines, planers, jointers, belt sanders and thicknessers. Standard equipment Dust filter Waste collection bag Castor wheels with brake Bag fastening clamp Optional equipment Extraction hose Ø100 mm Suction port reducers Additional set of filter bags Technical data Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Vacuum pressure 1,800 Pa Noise level 70 dB Bag capacity 60 L Number of bags 2 (filter + waste) Suction port diameter 100 mm Dimensions (H × W × L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: new, Year of construction: 2026, functionality: fully functional, All our extractors feature simple operation and possibility of quick bag replacement. Metal rotor ensures silent work. Affordable price in comparison to machine's capabilities. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Nsdpfx Aevu Ryrod Ascr Stable metal construction Default equipment 8 burlap bags Technical data Suction efficiency 6800 m3/h Bag capacity 4×200 Number of bags 8 Extracting connector diameter 1×180, 4×100 mm Dimensions (L×W×H) 3560×580×2200 mm Weight 152 kg Motor power 5.6 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: new, Year of construction: 2026, functionality: fully functional, Vacuum air-flow perfectly sucks out excess sawdust produced during machining wood. Extractor equipped with an extracting connector rotary 180°. Machine features For chips from milling machines, planers and saws High suction power Easy relocating due to the drive system Nodpfx Aovu Ayksd Ascr Rotor and metal body Quick attachment system for filter and bag Extracting connector can be rotated 180° simplifying attaching suction hoses Technical data Engine 1.5 kW/400V Speed 2850 rpm Bags capacity (Diameter / Length) 190 L (500 mm / 1100 mm) Maximum efficiency 3200 m3/h Intake connector 150 mm/ 3×100 mm Rotor diameter 300 mm Dimensions 985×560×2210 mm Weight 45 kg

Condition: new, functionality: fully functional, Year of construction: 2026, A machine ideal both for professional and amateur joiners. The fan optimal output works perfectly with the machines such as: planing machines, surfacers, thicknessing machines, milling machines, scaleboarding machines and dimension saws. Machine characteristics Nodpfxsvu Anus Ad Aocr MOTOR POWER 3,8kW REVOUTIONS 2950 rpm SUCTION OFF EFFICIENCY 4860 m3/h SUCTION FERRULE DIAMETER 4x 100 mm /1 x 180 VOLTAGE/FREQUENCY 3/400V