Used Cormak 350L Sandblaster - Top Open for sale (18,015)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence Kdsdpfx Aezu Ryhedqjr TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: new, Year of construction: 2026, CORMAK TYTAN 250x750 PRO 400V is an industrial-grade conventional lathe designed for precise, reliable, and long-lasting metalworking operations. The PRO version is powered by a three-phase 400V motor, delivering consistent power output and high torque across the entire speed range. Key Features 400V three-phase power supply – ensures stable motor performance even under heavy workloads, making it ideal for industrial applications. Lead screw – enables automatic longitudinal feed and threading in both metric and imperial standards. 135 mm hardened bed – induction-hardened and precision-ground to provide exceptional durability and accurate carriage guidance. P5-class tapered roller spindle bearings – ensure high rotational accuracy and rigidity during operation. Precision guideway adjustment – achieved through adjustable gibs with fine micrometric calibration. Enhanced operator safety – emergency stop with undervoltage release and motor thermal overload protection with status indication. Dual-feed capability – automatic longitudinal feed and manual cross feed increase machining flexibility. Construction and Technology The CORMAK TYTAN 250x750 PRO metal lathe is engineered for intensive industrial use. Its heavy-duty cast iron body effectively dampens vibrations, improving machining accuracy and surface finish. The 26.5 mm spindle bore allows machining of longer workpieces, while the MT4 spindle taper ensures compatibility with a wide range of tooling and accessories. The spindle speed can be adjusted in 6 ranges (125–2000 RPM) via a belt-driven transmission, allowing optimal cutting parameters for various materials and operations. The machine delivers excellent machining precision thanks to P5 precision bearings and high concentricity of the working components (runout tolerance ≤ 0.015 mm). The integrated lead screw enables accurate cutting of metric threads (0.2–3.5 mm) and imperial threads (8–56 TPI). An ergonomic control panel and an adjustable tailstock make the machine suitable for a wide range of turning operations, including taper turning. Standard Equipment 125 mm 3-jaw chuck with internal and external jaws Fixed steady rest Follow rest Change gears MT2 dead center MT4 dead center Oil can Chip tray Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Technical Specifications Specification Value 3-jaw chuck 125 mm Maximum swing over bed 250 mm Maximum swing over cross slide 150 mm Distance between centers 750 mm Maximum workpiece length 700 mm Bed width 135 mm Spindle bore 26.5 mm Spindle taper MT4 Tool post dimensions 65 × 65 × 20 mm Maximum tool size 12 × 12 mm Top slide travel 70 mm Cross slide travel 135 mm Longitudinal travel 650 mm Spindle speed ranges 6 ranges: 125–2000 RPM Metric thread range 18 pitches (0.2–3.5 mm) Imperial thread range 21 pitches (8–56 TPI) Longitudinal feed rates 6 feeds (0.07–0.4 mm/rev) Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Kdodpjvvlxlefx Adqer Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.5 kW, 400V Dimensions (L × W × H, without stand) 1310 × 610 × 480 mm Weight (without stand) 165 kg

Year of construction: 2021, condition: like new (used), functionality: fully functional, Specification Capacity 30 Ton Working length 1300mm Stroke length 100mm Throat depth Maximum open height without tools Fast speed of beam Kdjdpfx Adoziahdeqer Bending speed Return speed 200mm 300mm 100mm/s 10mm/s 90mm/s Backgauge travel 300mm Length 1500mm Width 1200mm Height 1910mm Approximate weight 2000kg Machine equipped with Cybelec CybTouch 8 control (X & Y axis) Top and bottom tooling Light guards

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: Simens, controller model: SINUMERIK 808D, total height: 2,700 mm, total length: 2,800 mm, total width: 2,300 mm, table width: 500 mm, table length: 1,000 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, The machine was purchased in August 2025 together with a lathe – listed in a separate advertisement – and has only been operated for testing purposes (up to 20 hours of operation). Due to a shift in business priorities, we will not be initiating the planned production. Additionally: 12,000 rpm spindle, 4th rotary axis, TS27R tool measurement probe Kdedpfx Aoyi Aprjdqer The machine is under a lease agreement with PKO Leasing S.A. until August 2028. Leasing terms will be provided upon contact. Lease transfer is preferred, although a cash purchase is possible with the lessor's consent.

Condition: new, Year of construction: 2026, Invest in the CORMAK HK25 VARIO and experience not only solid construction but also flexibility in carrying out a wide range of projects. This milling and drilling machine is an essential tool for anyone who values efficiency, precision, and versatility. Discover new possibilities in metal machining with a milling machine capable of meeting even the most demanding challenges. Machine features Automatic longitudinal table feed for milling operations Digital speed display Digital drilling depth display Smooth spindle speed adjustment Precision-mounted spindle bearings Machine specifications Parameter Value Drilling capacity 20 mm End milling capacity 16 mm Face milling capacity 63 mm Spindle taper MT3 Spindle stroke 50 mm Head tilt angle ±90° Number of spindle speeds Variable Spindle speed range 50–2250 rpm Working table surface 700 × 180 mm Maximum longitudinal table travel 490 mm Maximum cross table travel 180 mm Maximum vertical head travel 380 mm Number of T-slots 3 T-slot dimensions T12 / 12 mm Motor power S1/S6 0.75 kW / 1 kW, 230 V Dimensions 980 × 600 × 1010 mm Weight 140 kg Standard equipment Drill chuck Kodpfetz Sx Eex Adqodr Automatic X-axis feed Optional equipment Machine stand Machine vice 100 × 80 mm Cooling system

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Kdedpexx Scljfx Adqjr Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING Kdedpfexx Sfaox Adqer

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 52 mm, spindle speed (max.): 3,000 rpm, overall weight: 4,800 kg, The machine was purchased in August 2025 together with a vertical machining centre—listed in a separate advertisement—and has only been run for testing purposes (up to 20 operating hours). Due to changed business priorities, the planned production will not be launched. The machine is under a leasing agreement with PKO Leasing S.A. until August 2028. Leasing terms can be provided upon request. We prefer a lease transfer, although a cash purchase is also possible with the leasing company's consent. Kedoyi Aixopfx Adqedr

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times Kdjdpfeykq T Uex Adqor - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress Kdsdpfjykq D Hsx Adqjr - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2024, condition: used, functionality: fully functional, The electric double fryer with a capacity of 14 + 14 liters and a cabinet base, model Z7FREH2E00, is an excellent choice for professional kitchens or markets. The unit features high performance and enables the simultaneous frying of large quantities of food. This double fryer is specifically designed for intensive use in catering establishments or high-traffic TO GO sales outlets. You will receive an invoice with VAT shown. Technical data: Dimensions in mm: external (W x D x H): 800 x 720 x 942 Tank (W x D x H): 240 x 380 x 285 Cabinet (W x D x H): 680 x 640 x 420 Model designation: Z7FREH2E00 Serial number: 4082149208 Performance data: Tank: 2 x 12-14 liters Connection value: Electric: 17.4 kW / 3N / 400 V Temperature specifications: Operating temperature: 105 to 185 °C Weight specifications: Gross weight: 83 kg, Net weight: 81 kg Year of manufacture: 2024 Condition: Used, fully functional (operated for 2 weeks) Equipment: Electric fryer as a stand-alone unit with 2 directly heated standard tanks, each with a capacity of 14 liters 1.5 mm thick front and top plate made of CNS, side and rear panels made of stainless steel, Scotch-Brite finish, edges rounded on both sides Kdjdozvavzspfx Adqor Standard tank with directly heated, internal heating elements Operating temperature from 105 - 185 °C, thermostatically adjustable Filling volumes: min / max: 12 / 14 l per tank Height-adjustable feet (+50 mm) Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have questions, would you like a consultation, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING Kodpfx Aoxx R Nqodqjdr - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Year of construction: 2026, condition: new, functionality: fully functional, For sale: Open-top skip container, 3000 x 2000 x 1250 mm Product description: For sale is an open-top skip container, 3000 x 2000 x 1250 mm, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: - Bottom: 3 mm - Sides: 3 mm - Frame, C-profile: 80 x 50 x 4 - Fasteners for transport, made of 6 mm sheet metal - Drain valve in the bottom of the container - Transport with a forklift is possible along and across the container Kedpfxjzm Eihj Adqedr - Transport with a crane is possible - Warning stickers: white and red - Full range of RAL colors available - Zinc phosphate coating inside and outside - Primer, outside painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: - Robust construction for heavy materials - Easy handling thanks to sturdy hinges - Stackable - Weather-resistant due to corrosion-resistant coating

Condition: used, mileage: 289,050 km, power: 140 kW (190.35 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 3717X ----Why autonext? Over 400 cars and commercial vehicles available immediately. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options. Complete vehicle range available at autonext - Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear picture now: Watch the YouTube video to see the vehicle completely, inside and out: Good and well-maintained condition. 1st owner, German vehicle, non-smoker vehicle. Complete service history, only serviced at Mercedes Benz. Next service in 494 days. Automatic transmission. Engine 3.0 L - 140 kW V6. Workshop "Sortimo" with workbench and shelving system. Trailer hitch, increased towing capacity 3,500 kg. Ksdpfx Adszkd T Hsqedr Inverter "SP 2000". Rearview camera. Navigation system. Controlled air conditioning (Tempmatik). 230V sockets. LED cargo area light with switch. Rotating beacon lights. Comfort driver's seat. Fire extinguisher. ---- Special features: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 2nd battery (auxiliary battery) interior * Storage compartment in the headliner of the driver's cabin * Airbag, passenger side * 13-pole trailer socket * DAB tuner (digital radio reception) * Ceiling light in the cargo area with door contact switch * Entry handle on rear pillar, left * Entry handle on rear pillar, right * Driver's tachograph operation in front under the headliner * Chassis: Stabilizer level II * Vehicle without vehicle lowering * Cup holders in front * Grab handles, A-pillars * Additional main key * Rear door (opening angle 270 degrees) * Connector strip for electrical connections (driver's seat box) * Controlled air conditioning (Tempmatik) * Cargo area light LED * Cable duct on rear portal * Cable duct on side wall * Marking lights, side * Navigation system for MBUX multimedia system * Cross member with integrated step * Smoker's package * Tire pressure monitoring system * Spare wheel in driving condition * Spare wheel holder under frame end including jack * Rotating beacon lights (2) * Rearview camera * Acoustic reversing warning (external warning signal) * Windshield wipers with rain sensor * Safety belt system with warning system (passenger side) * Seats in the driver's cabin: passenger double seat * Seats in the driver's cabin: comfort driver's seat * Socket (12V connection) in the driver's cabin * Separating relay for additional battery * USB port in the middle below the dashboard (charging function only) * Fleece battery 92 Ah * Heat protection glazing (windshield with band filter at the top) Standard features: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard, passenger side, adaptive brake light, airbag, driver's side, hill start assist, anti-lock braking system (ABS), traction control system (ASR), drive type: rear-wheel drive, indicator for windshield washer fluid level, exterior mirrors, electrically adjustable and heated, both, outside temperature display, brake assist, headlining in the driver's cabin, automatic headlight activation, entry handle for sliding door on cargo area partition, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: side wind assist.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons Kjdsyzr Nmjpfx Adqjdr • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, mileage: 167,050 km, power: 125 kW (169.95 HP), first registration: 07/2023, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,835 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 7405X ----Why autonext? Over 400 passenger cars and commercial vehicles available immediately. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Watch the YouTube video to see the vehicle fully, both inside and out: Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Full service history, exclusively at Mercedes Benz Trailer hitch, increased towing capacity 2,800 kg 2 sliding doors (on both sides) Rear view camera Navigation system Blind spot assist Active braking assist Active lane keeping assist Speed limit system (cruise control/speed limiter) Controlled air conditioning (Tempmatik) Seat heating Tachograph Load securing rails in the cargo area ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Steering wheel with multi-function buttons * Storage compartment in the roof liner of the driver's cab * Airbag on the passenger side * Acoustic package * Trailer hitch: ball head, for increased towing capacity * Trailer socket 13-pin * Exterior mirrors, electrically foldable * Exterior mirrors with blind spot assist * Battery disconnect switch, 1-pole * DAB tuner (digital radio reception) * Ceiling light in the cargo area with door contact * Entry handle on the rear pillar, rear right * Driving assistance system: active braking assist * Driving assistance system: active lane keeping assist * Tachograph operation at the front under the roof liner * Digital tachograph * Chassis: stabilization level I * Generator 250 A * Speed control system (cruise control) * Rear door (opening angle 270 degrees) * Wooden floor in the cargo area * Controlled air conditioning (Tempmatik) * Comfort lighting in the passenger/cargo area * Fuel tank: main tank 93 liters * Cargo area light LED * Cargo area partition with window * Cable duct on the rear portal * Cable duct on the side wall * Marker lights on the side * Navigation system for MBUX multimedia system * Fog lights with cornering function * Crossbar with integrated step * Spare wheel in driving condition * Spare wheel holder under the end of the frame, including jack * Rear view camera * Windshield wipers with rain sensor * Sliding door, loading/passenger compartment, left * Rail system for load securing * Mud flaps, front * Shoulder-pelvis airbag (thorax-pelvis sidebag), passenger side * Shoulder-pelvis airbag (thorax-pelvis sidebag), driver side * Seats in the driver's cab: double passenger seat * Seats in the driver's cab: heated passenger seat Ksdszrkdhspfx Adqsdr * Seats in the driver's cab: heated driver's seat * Paneling in the loading/passenger compartment: high-quality plastic (up to the roof) * Load securing rails in the cargo area - side wall on the railing * Front axle reinforced * Heat-insulating glazing (windshield with band filter at the top) * Auxiliary heater (air) electric Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag on the driver's side, hill-start assist, anti-lock braking system (ABS), traction control system (ASR), A

Condition: good (used), Year of construction: 2016, FOR SALE CNC Lathe TOP TURN S20C – Year 2016 Brand: TOP TURN (Distributed by major machine tool networks) Model: S20C Year: 2016 CNC Control: FAGOR (User-friendly interface for teaching cycles and ISO programming) Technical Description This 2016 CNC lathe is a versatile machine, ideal for precision work in small to medium production batches. Its modern design offers excellent rigidity and very quick set-up, thanks to the Fagor control system. Capacity: - Swing over bed: 400 mm - Swing over carriage: 210 mm - Distance between centers: 1,000 mm - Bed width: 300 mm Kdodpfxey Sltts Adqjr Spindle: - Spindle bore: 52 mm (Comfortable bar capacity) - Spindle speed: Up to 2,500 rpm - Spindle nose: Camlock D1-6 Included Equipment - FAGOR CNC: Color screen, cycle-assisted programming (ideal for operators used to conventional machines) - Turret: Automatic turret (electric/hydraulic) for fast and programmable tool changes - Chuck: Precision 3-jaw chuck (approx. 200 mm diameter) - Tailstock: CM4, robust - Safety: Fully enclosed machine with interlocked sliding doors, compliant with CE standards - Coolant system: Centralized with integrated chip tray Highlights - Recent (2016): Modern electronic and mechanical components, easy to source spare parts - Precision: High-precision ball screws on both axes - Compact: Small footprint relative to its machining capacity Weight and Dimensions - Dimensions: Approx. 2,400 x 1,400 x 1,700 mm - Weight: Approx. 1,800 kg

Condition: used, mileage: 238,811 km, power: 120 kW (163.15 HP), first registration: 05/2011, fuel type: diesel, overall weight: 5,000 kg, color: silver, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 12 m³, loading space length: 3,400 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, * SPRINTER 516 CDI panel van L2 with SUPER high roof * AIR CONDITIONING + automatic transmission * Vehicle number for customer inquiries: 4722 * Automatic transmission Ksdjzdly Ujpfx Adqjdr * TEMPMATIC semi-automatic climate control system * Environmental badge (green) * Hill-start assist * Trailer coupling for increased trailer load 2.8 t/3.0 t * Engine version Euro 5 * Auxiliary water heater * Air conditioning * Service book maintained * PARKTRONIC * Airbag passenger * Airbag driver * Two-seater * Digital tachograph * 5.0-ton vehicle * Wheelbase 3665 mm * Heat-reflective glass with band filter on the windshield * Storage compartment in the headliner of the driver's cab * Exterior mirrors, electrically adjustable and heated, both sides * Solid partition with 1 window * Reinforced stabilizer on the front axle * Reinforced stabilizer on the rear axle * Power steering * Rear doors, opening to the side * Load compartment floor with different paint finish * Sliding door, loading/passenger compartment, right side * Crossmember with integrated step * Electric windows * Engine 2.1 L - 120 kW CDI catalytic converter * Speed limiter 90 km/h EC * Electronic Stability Program (ESP) * Body variant: Super high roof in vehicle color * Central locking with main key operation * Solid partition No liability for printing and typographical errors Sale only to commercial customers Subject to errors and prior sale* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer * Guarantee insurance possible on request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plate for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, power: 1 kW (1.36 HP), gearing type: other, overall weight: 2,500 kg, empty load weight: 850 kg, maximum load weight: 1,650 kg, first registration: 04/2000, Year of construction: 2000, driver cabin: other, Very well maintained sorting grapple, top condition, completely sandblasted and painted, opening width 1,600 mm, cutting width 1,000 mm, for excavators from 15-20 tons, quick coupler and head plates on request, If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Kjdpfxoxawyxj Adqodr Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: Used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, with additional equipment (detailed below). First owner. Overhauled last year (belt and drive rollers replaced, glue pot regenerated). The edge banding machine operated on one shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and the ability to operate in continuous mode. Price: 85,000 PLN net. Excellent condition - the machine is in full working order, regularly serviced, and ready for operation without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by prior appointment in Borów (83-332). Please contact us by phone for additional information, as well as videos and pictures of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA), polyurethane (PUR) glues, and zero-joint systems. - Edge dimensions: Edge banding from 0.4 to 3 mm thick on components from 10 to 60 mm thick. - Power supply and power: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Aggregates: Equipped with a scraper, chamfering cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic edge alignment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: Narrow band edge banding machine from the German company Hebrock with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick on components from 10 to 60 mm thick, as well as pre-milling the panel with diamond cutters. The machine is optimally equipped for each type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual aggregates. The patented Hebrock system in the edge milling aggregates (consisting of adjusting the lower and upper cutter from outside the machine – during operation), as well as the automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendly operation. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max. edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 kW motor Kdedpfx Aozizabsdqsr • Glue heating time: 6 min • Total power consumption: max. 14 kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Extraction nozzle diameter: ø 140 mm, • Required extraction performance: 24 m3/min • Min. air velocity in the extraction nozzle: 20 m/s • Required vacuum in the extraction nozzle: 1300 Pa

Condition: used, mileage: 135,000 km, power: 110 kW (149.56 HP), first registration: 09/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 03/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,300 mm, total width: 1,904 mm, total height: 2,477 mm, loading space length: 2,680 mm, loading space height: 1,850 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, VW T6 Panel Van Long L2 H2 High Roof with Extra-High Sliding Door, Ideal for Trades and Commercial Use. Sortimo Workshop/Shelving System Fitted (details below) – Next Inspection Due: March 2028 Permissible Gross Weight: 3.2 t (includes 16" reinforced steel wheels) Programmable auxiliary heater Heated driver's seat Climatic air conditioning with pollen filter ++ Air conditioning not functional, most likely condenser leak ++ Driver's seat with armrests, multi-adjustable: seat height, backrest, lumbar support Passenger seat adjustable: backrest Driver assistance systems: - Reversing camera - Cruise control - Fatigue detection - Hill start assist - Brake assist (HBA) - ABS, ASR, ESP Discover Media audio navigation system (touchscreen color display) - Navigation with TMC - Radio / CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free device for mobile phones with Bluetooth - App Connect (Apple CarPlay, Android Auto) pre-installed (can be activated) - Mobile online services Car-Net - Voice control pre-installed (can be activated) - 4 speakers, good sound quality Multifunction display Plus / on-board computer Kdjdpfx Aezu Aihodqsr Driver and passenger airbags (passenger airbag deactivatable) Electrical Package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Fog lights with cornering function Spare wheel ## Top speed restriction (Vmax) to 130 km/h (can be removed) ## Second battery with isolating relay Heated windscreen washer nozzles Wheelbase: 3,400 mm Sliding door, cargo area right, high, with dark-tinted glazing High rear wing doors, dark-tinted, heated, with wiper and up to 250° opening N1 classification (truck/van) 17" chassis 6-speed manual gearbox Adjustable steering wheel Cab floor: Rubber and rubber mats Comfort roof liner Heat-insulating glazing Grab handles on A-pillars Cargo Area Equipment: Sortimo workshop installation (similar to Aluca, Bott, Würth). Left side with shelving modules, shelf compartments, storage compartments, 5 drawers, holders for small parts bins (bins not included), 3 case carriers (cases not included). Right side with workbench including folding vice, 4 drawers, 4 case carriers (cases not included). Folding vice. Bulkhead partition with window. Robust wooden floor. Load securing rings and rails. Sidewall cladding. LED lighting and workbench lamp. 2 x 12V sockets. Ventilation and extraction system. Electrical System: External 230V power supply (input). Fuse box with overload protection, residual current device (RCD), and four Schuko sockets next to workbench. Load Area Dimensions: - Length bottom: approx. 268 cm - Length middle: approx. 261 cm - Length top: approx. 240 cm - Height: approx. 185 cm Tyres: Fitted tyres: Winter tyres 215/65 R16, approx. 4 / 4 / 7 / 7 mm tread depth Additional tyres: Summer tyres 205/65 R16, approx. 6 mm tread (front), approx. 7 mm (rear) Service History (VW Workshop): 05.2021 / 41,607 km: inspection + oil change 05.2022 / 60,106 km: inspection + oil change 05.2023 / 83,032 km: inspection + oil change + brake fluid 06.2024 / 107,830 km: inspection + oil change 01.2025 / 123,676 km: oil change, fuel filter, air filter 05.2025 / 131,654 km: inspection + oil change + front & rear brake discs and pads replaced Despite utmost care, input and data transmission errors may occur in the vehicle description or pictures. Errors and prior sale excepted.

Condition: new, Year of construction: 2025, color: white, new (ONE-WAY) 20FT OPEN SIDE CONTAINER 1x side fully openable via 2 folding doors 2x available = Further information = General information Year of manufacture: 2025 Model year: 2026 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Unladen weight: 3,080 kg Payload: 27,400 kg Gross weight: 30,480 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Kdedsy I Ut Ujpfx Adqor Further information Please contact Arne Honingh for more information.

Condition: new, Year of construction: 2025, color: white, new (ONE-WAY) 20FT OPEN SIDE CONTAINER 1 side fully openable via 2 folding doors 2x available = Further Information = General Information Year of manufacture: 2025 Model year: 2026 Serial number: RX2519277 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Empty weight: 3,080 kg Payload: 27,400 kg Kodpfx Asy Ndliodqjdr Gross weight: 30,480 kg Condition General condition: very good Technical condition: very good Visual condition: very good Further Information Contact Arne Honingh for more details.

Condition: excellent (used), Year of construction: 2020, 503 USED Tagliavini Modular EMT 6/4060 electric deck oven. The oven features spiral-shaped heating elements at the front of the chamber, ensuring uniform baking throughout the entire baking chamber. The oven's power is adjustable and can be controlled as needed, directing more power to the top of the chamber, less to the bottom, or vice versa. This ensures baking at a constant temperature with appropriately adjusted power at the top and bottom of the chamber. Triack processors maintain a uniform temperature throughout the entire baking process, increasing oven efficiency while reducing operating costs. EXTERNAL DIMENSIONS (in cm): - W: 164 - L: 167 (207 with hood) - H: 208 (262 with extractor/fan) INTERNAL DIMENSIONS OF THE BAKING CHAMBER (in cm): - W: 125 - L: 129 - H: 20 (3 lower), 24 (upper) Kdjdpfx Adszt S Eieqer TECHNICAL DATA: - year of production: 2020 - power supply: 400V 3+N~ 50Hz - power per chamber: 8.04 kW (average chamber consumption: approx. 3.25 kW/h) - weight: 1400 kg - chamber interior and front made of stainless steel - main door made of glass - door opens upwards - halogen lamp chamber EQUIPMENT: - 4 baking chambers with a stone plate for 6 baking trays 60x40 (total 24 baking trays 60x40) - extractor hood with fan - steam generator - base on wheels - "SMART TOUCH" touchscreen control panels with a programmer and memory for 250 baking recipes Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: used, functionality: fully functional, mileage: 333,400 km, first registration: 09/2007, fuel type: diesel, Year of construction: 2007, Truck with a three-way tipper body, with 600mm sideboards divided into 2 pieces, rear sideboard with top and bottom opening, sleeper cab. Kdsdpfxozp U Ilo Adqjr