Used Combination Folders for sale (4,240)

Year of construction: 2021, condition: as good as new (ex-display), creasing- folding machine dmsDIGITAL 375+375KF Large stacking unit 500 mm Alignment section, creasing module, transfer section Folding unit with two swords double sheet diverter for non-stop operation Nsdpfx Ajnfvvmoiyelc up to 8,200 sheets/h fast

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Nodpszd Uhhofx Aiyslc Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: good (used), functionality: fully functional, Year of construction: 2000, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4 2500x6mm Year of Manufacture: 2000 Technical Data Manufacturer: HERA Type: SM 4 Year of Manufacture: 2000 Capacity: 2520 x 6 mm Upper ram stroke: 450 mm Lower ram adjustment: max. 100 mm Nledey U Ec Hepfx Aiysc Bending ram adjustment: max. 100 mm Connection value: 5.5 kW / 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions: approx. L 3.95 x W 2.80 x H 1.9 m Weight: 6.7 t Equipment • Sharp die • Bending die • Segmented bottom die set (total length approx. 2000 mm) • Motorized bending ram adjustment • Controlled back gauge 10-1000 mm • Siemens S7/Simatic OP7 control system The machine is in good condition. It comes from the workshop of a correctional facility. All information is provided without warranty. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, tables measured with top precision max. 1/10 mm completely set up used top condition cleaned functionally tested partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Nlodpfx Aiezd Hdnjyec Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, with segmented infeed roller and segmented pressure bar Tables with top accuracy of 0.0 – max. 1/10 mm Bridge-type, single-sided reversible knife system completely adjusted Nlsdpfxozd Hc Re Aiyoc used good condition cleaned functionally tested partially refurbished Manufacturer: Kölle Type: HK63 Machine no.: 1409 Number of knives: 2 Feed rate m/min: 2 speeds Jointing strip Table guide rollers Segmented pressure bar Segmented infeed roller Integrated dust extraction hood Planing width approx. mm: 630 Planing height approx. mm: 220 Table length approx. mm: 2100 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 2200 x 1300 x 1400 Weight approx. kg: 1200 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted used in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Type: 445-A Year of manufacture: 1994 Machine no.: 410 GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Nlodezd Hcqepfx Aiyjc Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: good (used), Code: 0404 Nlodpfx Ajzcqmfoiyec Brand: HAMMER - FELDER GROUP Model: A3 - 31 - CE Standard 2-works combined machine (Surface Planer/Thickness planer ) for joinery, furniture, joinery fittings, custom-made furniture, plastic and various – CE Standard Technical specifications: Planer width 310 mm Table length 1400 mm Tilting guide 90-45° Three-phase motor v. 380 4 Hp Planer shaft with 3 knives Max chip removal 4 mm Thickness table width 306 mm Thickness table length 540 mm Min workpiece length 145 mm Thickness feed speed 6 mt/min Suction inlet diameter 120 mm Overall dimensions mm 1450 x 600 x 1000 h Weight kg 290

Condition: used, Year of construction: 2001, 3 MONTHS WARRANTY offer consist of: - cross folder Horizon AFC-504 AKT - flat pile feeder - delivery connector Horizon AFC-504 AKT 4-buckles cross folder - roller condition: 0% Njdpfsu Sr Ehsx Aiyslc - technology: touch & work - error avoidance: misfeed-,doublefeed- and jamming control - memory folding types: 11 standard-types of folding preprogrammed - saveable jobs: 50 memories for repeat orders - knife: full automatic - numbers of buckles: 1. folding unit: 4 buckles + knife 2. folding unit: 2 buckles - sheet size: max. 490x650mm; min. 120x172mm - paper weight: 40-250g/sqm - pile height: 650mm - speed: max. 27.000 cycles/h - power: 400V / 50Hz - 2,5kW - dimensions: 2.540x1.790x1.440mm - weight: 870kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Nljdsygu Smopfx Aiysc Length:16000mm Width:6000mm Height:6000mm

Condition: good (used), Code: 0403 Brand: SICAR Model: BRAVA 350/3 - CE Standard 3-works combined machine (Surface planer /Thickness planer /Mortiser) for wood, joinery, furniture, joinery fittings, plastics and various – CE Standard Technical specifications: Working width 350 mm Work surface length 1600 mm Tilting of fenknives Knives dimensions 350 x 20 x 3 mm Thickness planer table dimensions 350 x 660 mm Max working height 220 mm Min working height 7 mm Nsdpfezcfwxox Aiyjlc Feed speed 7 mt/min Router: Table dimensions 250 x 500 mm Longitudinal stroke 200 mm Transversal stroke 100 mm Vertical stroke 90 mm Chuck 16 mm Chuck rotation speed 5700 rpm Workpiece clamping presser Three-phase motor 2,2 Kw Overall dimensions mm 1700 x 950 x 1000 h Weight kg 340

Condition: good (used), Year of construction: 1998, For sale is a used Holzprofi circular saw and milling machine KPSF 2000 with 3 milling speeds. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Njdpfx Aozf H D Roiyjlc Technical data: - Circular saw and milling head can be swivelled 90-45° - Sliding table 2000 mm - Cutting width 1000 mm - Extension table with rip fence - 3 milling speeds 3000/6000/8000 rpm - Safety guards - Feed device - Upper guard The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, milling machine, combination machine Reference: R-N316X

Condition: excellent (used), Combi 500 Combination Planer and Thicknesser - 2-knife cutterblock - Aigner auxiliary fence - Table length: 1800mm Nlsdpfxjy Tucto Aiyoc - 2 dust extraction ports - Feed motor with 2 speeds

Condition: used, Year of construction: 1988, working width: 510 mm, Panhans surfacing and thicknessing planer, model 445-A, 51 cm planing width. Cutter block with 4 straight knives, 2 feed rates, electric table height adjustment. The motor brake is unfortunately defective!!! Otherwise, the machine is in very good condition for its age. Nsdpfx Aiexd D Nbsyolc

Condition: excellent (used), AGT Combination table saw and miter saw - Cutting width: 380mm - Cutting height: 85/40mm Nljdsy Tmgkepfx Aiyoc - Weight: approx. 50kg - Tilting and swiveling

Condition: like new (used), Year of construction: 2020, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Njdezcyr Dopfx Aiyjlc Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 13,100 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,350 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, We offer for sale new 11 m3 containers manufactured in our own production facility. The containers feature the following specifications: - Manufactured according to DIN 30722-1 - Lifting bracket with 50 mm diameter - Hook height 1570 mm Nledpfxjzcm Huo Aiyoc - Internal body length 6,000 mm - Internal body width approx. 2,350 mm - Internal body height 800 mm - Floor made of 5 mm S-235 grade steel - Side walls made of 3 mm S-235 grade steel - Sheets and profiles continuously welded - Mostly stress-free construction - Floor brace spacing approx. 350 mm - Top chord made of S-355 special steel - All-round net hooks - External rollers, lubricatable and replaceable - Warning marking according to §32 (1) StVO & DIN 67520 - Total weight 15,000 kg - Tare weight approx. 1,900 kg - Payload approx. 13,100 kg - All steels sourced from Thyssen Krupp - All steel parts automatically sandblasted before processing - Double zinc phosphate primer with 120 µm - 2K coating in RAL 7016 with 80 µm - 6x 5t lashing points in the body floor - 2x 7t lashing points on the inside of the front wall - Traversable, spring-relieved hinged flap - Incl. nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Unit price: €5,700.00 plus VAT - Also available in stock in 5.5 m Delivery throughout Germany is possible for an additional charge. If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sales excepted.

Condition: used, SICAR thickness planer Nlsdpfx Aozha I Ueiyec Planing width: 500mm, 4 traditional knives, i.e., wedge-type knives. 2 feed speeds for the thickness planer, Mechanical adjustment of the thickness planer table, Max. planing thickness: 230mm, Length of planer bed: 202cm, with extension to 240cm, Adjustable planer fence, 4KW motor.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly suitable for demanding series production. This is a measuring machine, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. Njdpfey U E H Eex Aiyolc Operating Mode: Servo Punching / Laser Cutting Punching Force: 294 (30) kN (tons) Laser Power: 2 kW Max. Processing Size (Punching): 1600 x 3000 mm Max. Processing Size (Cutting): 1500 x 2500 mm Max. Material Thickness: 6.35 mm (ball) / 3 mm (brush) Max. Punching Diameter: 88.9 mm Stroke Rate: 2000 cycles per minute (cpm) Punching Frequency (1 mm pitch): 700 cpm Punching Frequency (25.4 mm pitch): 400 cpm Accuracy (Punching/Cutting): ±0.10 mm Combined Accuracy: ±0.15 mm Clamps: 4 pcs Tool Stations: 38 pcs CNC System: Siemens 840Dsl CNC Axes: 11 Max. Sheet Metal Speed: 102 m/min Turret Speed: 30 rpm Max. Load: 180 kg Dimensions (Length): 8000 mm Dimensions (Width): 8000 mm Dimensions (Height): 2300 mm Machine Weight: 20000 kg

Condition: excellent (used), Year of construction: 2020, YEAR 2020 MODEL: TD 150 MAXIMUM CAPACITY: 1.50 mm (400 N/mm²) WORKING LENGTHS: 6.4 m DEPTH OF NOTCH: 1250 mm Nljdpfxozcm Dme Aiyec WIDTH OF BENDING BLADE: 10 mm + additional guide 10 mm MAXIMUM BENDING ANGLE: 143° BENDING ACCURACY: ± 0.5°

Condition: good (used), Code: 0400 Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Motor 2 Hp Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Nsdpfjzbu Azex Aiyelc Mortising machine: Table dimensions mm 200 x 400 Spindle 0–16 mm Longitudinal stroke 150 mm Transverse stroke 90 mm Vertical adjustment by handwheel Overall dimensions of assembled machine mm 2000 x 1400 x 860 h Weight kg 450

Condition: used, functionality: fully functional, Year of construction: 1998, control type: NC control, actuation type: electric, working width: 2,000 mm, sheet thickness (max.): 5 mm, power: 5 kW (6.80 HP), Equipment: CE marking, documentation/manual, foot remote control, We are offering this ready-to-use SCHRÖDER MAK 3 2000X5 NC swivel bending machine, manufactured in 1998. Nljdpezdzm Dofx Aiysc The machine is fully functional. It exhibits some inaccuracies due to its age, but it is perfectly adequate for many applications. If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), You are bidding on a press brake from the well-known German manufacturer Biegemaster. Features of the machine: Bending length slightly over 4m Sheet metal thickness (steel) 2mm Adjustable bending angle, see picture Emergency stop Sheet metal support Control panel operation An advantage of this design is that sheets that have already been bent can also be bent again on the side. Free loading is possible. You will receive an invoice in accordance with §25a UStG (German Value Added Tax Act). I can arrange for a forwarding agent if desired. Free loading as shown in the pictures. Inspection and testing are possible after a telephone appointment has been arranged. Payment in cash upon collection. If I can do anything else for you, please call me – thank you. Nlodpfx Aszcw Uceiyec Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the highway) Article number

Condition: excellent (used), Year of construction: 2009, Large working width: 1020 mm For sheet metal (with a tensile strength of 40 kg): up to 2 mm Small bending width: 10 x s Nlodjy S Abujpfx Aiyjc Small inner radius: 1.5 - 2 x s Opening width of the upper die: 190 mm Highest working point of the upper die: 120 mm Lowering distance of the lower die: 60 mm Small box profile (W x H): 165 x 125 mm Space requirement (W x D): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Condition: used, functionality: fully functional, control type: manual, Profile steel shears Peddinghaus Peddycut 275, 6-way combination Immediately available ex works: Profile steel shears Peddinghaus Type Peddycut 275 Year of manufacture 1987 Pressing force 27 tons Table 400 x 250 mm Overhang 90 mm Capacity 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Nlsdpfxsza Swao Aiyoc Round steel 28 mm Square steel 25 mm Blade length 175 mm Punch stroke 24 mm Pierces 20 mm holes in 19 mm or 30 mm thick sheet metal Foot switch Bobmewfdbpsm Av Euedc Various punch dies Transport: ex works

Condition: good (used), Year of construction: 2000, Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm Nlodpfxey Rt Aaj Aiyec -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg