Used Chiny 0,2Mm - 1,0 Mm Small for sale (76,930)

Condition: used, Technical data for the pallet racking upright: Racking system: META (Thyssen) Type: Multipal S Included in delivery: 1x pallet racking upright, used Material color: Sendzimir galvanized Upright type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Includes horizontal and diagonal braces and base plates The uprights are pre-assembled (bolted frame) Height: 2,200 mm Depth: 1,100 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Fedpjz I Scnsfx Aa Iegh

Condition: used, clear span: 2,700 mm, total length: 2,860 mm, total width: 1,050 mm, total height: 3,800 mm, Technical data for the pallet racking system: Racking system: Jungheinrich Type: Delta Technical data for installation: Number of racking rows: 1 unit Length per racking row: approx. 2,860 mm Number of bays / racking row: 1 unit, each 2,700 mm Number of levels including base level: 3 units Included in the scope of delivery: 02x Pallet racking uprights, used Material color: blue Profile dimensions: 80 x 55 mm Including cross and diagonal bracing, upright protectors and base plates Fgsdpfx Asz Ndd Hja Ijh The uprights are pre-assembled (welded framework) Height: 3,800 mm Depth: 1,050 mm 06x Pallet racking beams, used Material color: yellow Box profile: 120 x 50 mm Beam type: HN 120x30 Connector: 3 HK (hooks) Clear width: 2,700 mm 12x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 08x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 04x Shims, used Material: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the frame profile: Racking system: Stow Type: Pallet rack NS Included in delivery: 1x frame profile, used Material color: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Frame height: 9,650 mm Fodpfxez Nc Eps Aa Iegh Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.

Condition: used, total length: 1,220 mm, total width: 400 mm, total height: 2,000 mm, load capacity per storage section: 150 kg, We are offering used shelving systems for sale here. TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new product) Shelf: 1,220 x 400 mm (used product) Load capacity per shelf: 150 kg Number of levels: 5 Plug-in assembly Cross brace Graduated prices net per piece, plus VAT: Base units: 1 - 5 units: €41.50 net per piece 6 - 20 units: €39.43 net per piece 21 - 50 units: €37.35 net per piece 51 units and up: €35.28 net per piece Add-on units: 1 - 5 units: €29.50 net per piece 6 - 20 units: €28.03 net per piece 21 - 50 units: €26.55 net per piece 51 units and up: €25.08 net per piece PROJECT DESIGN Our sales team will be happy to create a non-binding offer tailored to your specific needs. Fgjdpoy Dgglofx Aa Ioh TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price is quoted as a unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, material handling technology, storage platforms, textile storage, and machines for the retail, industrial, and craft sectors. We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Win-win – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Fedpewwzudefx Aa Iogh Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Fgodpemhhyasfx Aa Ieh - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fgjdpfjmhhypex Aa Ioh Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Fodpfx Aaemhh Ane Iogh Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Fgsdpsmhh Dzefx Aa Ish - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 6 • Surface: galvanized • Plug-in assembly • Condition: used Large quantities available immediately. Graduated prices net per piece plus VAT: Basic bay: 1 - 5 bays: €54.00 6 - 20 bays: €52.38 21 - 50 bays: €50.76 From 51 bays: €49.14 Add-on bays: 1 - 10 bays: €39.00 11 - 25 bays: €37.83 26 - 75 bays: €36.73 From 76 bays: €35.69 Fgodpfx Aaouk E Thj Ijh Ex works Nordhorn. YOUR CONTACTS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We will be happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is understood to be the unit price/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, storage platforms, textile storage, and machines for retail, industry, and trades. We offer you attractive used offers from various manufacturers/brands on an ongoing basis. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Storage technology | Levelmaker® | Logistics | Solutions

Year of construction: 2020, condition: new, We are offering for sale a new shelf connector from the manufacturer Nedcon NS. The scope of delivery includes: 01x SET of spacers, new Length: 200 mm Fgjdjf S Iq Tepfx Aa Ioh Material color: Sendzimir galvanized consisting of: 01x Spacer, L=200, Sendzimir galvanized 02x Hex head screw 8.8, M10x25 galvanized 02x Lock nut, 6-sided 8.8, M10, flange, galvanized 04x Hex head screws, M10, galvanized

Condition: good (used), We are offering for sale a used shelf connector from the manufacturer Mecalux. Technical data for the shelf connector: Manufacturer: Mecalux The scope of delivery includes: Foded Ttzhopfx Aa Ijgh 01x Shelf connector, used Material color: Sendzimir galvanized Shelf spacing: approx. 400 mm Profile height: approx. 80 mm Weight/piece: approx. 0.704 kg/piece 04x Hex head screws, M8 x 20 8.8 04x Hex nuts, M8 04x Washers, M8

Condition: good (used), Note: The grating may show signs of damage, scratches, dents, or welded repairs. Scope of delivery includes: 01x inserted shelf grating, used Material colour: hot-dip galvanized Overall width: approx. 1,640 mm (cross bar direction) Overall depth: approx. 1,183 mm (bearing bar direction) Suitable for upright depth: 1,200 mm Clear support span: approx. 1,090 mm Beam support: approx. 50 mm Bearing bar dimensions: 30/1.8 mm Frame height: approx. 45 mm Mesh size: approx. 68 x 47 mm Weight | Piece: approx. 25.20 kg Internal designation: GR-45 Your contacts in our company: Fsdpfoqwzvcsx Aa Iogh Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Technical data for the pallet rack upright: Racking system: Stow Type: Pal Rack NS Fedpfx Aek Uuv Sea Iogh Included in the scope of delivery: 01x Pallet rack upright, used Material color: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 9,650 mm Depth: 1,100 mm General information about the item: This item is offered for pick-up only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Jung Heinrich Type: MPB Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 80 x 50 mm Crossbeam type: AUF'B'E0488 Agraffe: 4 HK (hooks) Fgjdpfxjld Iycs Aa Ijh Clear width: 2,750 mm Max. load per pair of crossbeams: 1,200 kg with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams To prevent unintentional lifting out.

Condition: good (used), Technical specifications for the pallet racking crossbar: Racking system: Dexion Type: Speedlock P90 Fgodpfx Aslkc I Uea Ioh Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: orange Crossbar type: BX100|50|15 Box profile: 100 x 50 mm Fasteners: 4 HK (hooks) Clear span: 3,000 mm Max. load per crossbar pair: 2,150 kg, with evenly distributed load Shelf load only valid when combined with frame profile 90|20 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting.

Condition: used, The scope of delivery includes: 01x stand protection, used Manufacturer: Bito Fgedpfx Aastt R H Ao Ish Material color: yellow Total height: approx. 715 mm Total width: approx. 99 mm Inner width: approx. 92 mm Leg dimension: approx. 65 x 65 mm Material thickness: approx. 3.5 mm Weight per unit: 4.96 kg. 04x screw M10x40 mm 04x nuts M10x40 mm 04x spacer sleeve 14x1.5x21 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We offer you a new square tube for sale here. The scope of delivery includes: 01 x Square tube, new Material color: hot-dip galvanized Total length: 6,050 mm Profile dimensions: 50 x 50 mm Material thickness: 2 mm Steel grade: S235JRH/275JRH Customs tariff number: 73066192 Manufactured according to: EN 10219-1 Our services at a glance: (Prices on request) Assembly, installation Please note our general assembly conditions Fodpfxsdzq Scj Aa Iogh Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), Technical data: Fedpfx Ajibvknja Ijgh Manufacturer: Tegometall Type: Cl Suitable for frame profile: CI 100x80 Included in delivery: 01x U-stand protector, used Material color: orange Overall height: approx. 730 mm Overall width: approx. 130 mm Internal width: approx. 120 mm Depth: approx. 60 mm Material thickness: approx. 5 mm 02x Locking pins, used Design: completely galvanized For securing the stand protectors against unintentional removal.

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange IPE profile: 100 x 55 mm Connector: 3 holes Clear width: approx. 2,700 mm 3 holes per connector Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 1x set of fastening material consisting of: 06x screws M10 06x nuts Fjdpfx Aaoibzfte Isgh 06x washers

Condition: good (used), The scope of delivery includes: 1x used pallet rack beam Material color: orange IPE profile: 100 x 55 mm Fsdpfx Aajibzgxs Ijgh Bracket: 5 holes Clear width: approx. 2,700 mm Per bracket: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 1x set of fastening materials consisting of: 10x M10 screws 10x nuts 10x washers

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Fgodpfx Asidcg Aea Ish Included in the scope of delivery: 01x CS Sigma profile, used Material color: sendzimir zinc-coated Overall length: approx. 4,450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: good (used), Technical data for the CS Sigma profile: Fgedpfx Aasidchgo Ieh Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: 1x CS Sigma profile, used Material color: sendzimir galvanized Overall length: approx. 5,600 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: used, We are offering used shelving units here. Fgsdpfx Aey Hqrkoa Ijh TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €506.50 net (2 starter bays + 8 extension bays) €602.74 gross incl. VAT Tiered Pricing Starter bays: 1 - 5 pcs: €70.00 net y6 - 20 pcs: €66.63 net 21 - 50 pcs: €63.25 net from 51 pcs: €59.88 net Extension bays: 1 - 5 pcs: €50.00 net 6 - 20 pcs: €47.50 net 21 - 50 pcs: €45.00 net from 51 pcs: €42.50 net Large quantities are available directly from stock. YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We can assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. Additional costs vary depending on delivery location and order volume and can be individually quoted upon request. PROJECT PLANNING Our sales team will gladly provide you with a non-binding, tailor-made offer according to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the case of an order. The indicated price is per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trade. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used shelving systems for sale here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Usage: single-sided Material: Galvanized steel PRICE €270.00 net (1 starter bay + 4 add-on bays) €321.30 gross incl. VAT Tiered pricing Starter bays: 1 - 5 pcs: €70.00 net each 6 - 20 pcs: €66.63 net each 21 - 50 pcs: €63.25 net each from 51 pcs: €59.88 net each Add-on bays: 1 - 5 pcs: €50.00 net each 6 - 20 pcs: €47.50 net each 21 - 50 pcs: €45.00 net each from 51 pcs: €42.50 net each Large quantities available ex-stock. YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available at an additional charge. Additional costs depend on the delivery location and shipment size and can be provided upon request. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. PAYMENT TERMS Payment terms are to be agreed upon order placement. Prices are quoted per item/net price or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine platforms, textile storage, as well as machinery for trade, industry, and crafts. Fgsdoy Hqr Rspfx Aa Ish We regularly offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Four wins – The success modules of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions