Used Cfs 1400 Liters for sale (8,793)

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Nlsdpfx Acjzka Rue Ajg Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: good (used), Electric fryer direct from European meals factory. Perfect for frying burgers and nuggets. Electrically heated. Top hold down belt. In lovely condition. 4.5m frying length, high power - 305Kw model. Njdpfezkuwpjx Ac Aolg

Condition: used, continuous grilling line all stainless steel Nledpozvpmvofx Ac Aeg with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Nlsdpfx Acezg Dx Ue Ajg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: good (used), 1500 litre heated oil storage tank, was used in European food factory in conjunction with a GEA fryer. Electrically heated and jacketed. Nsdpezkuxmsfx Ac Aolg

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system Njdpfxozvwqpe Ac Ajlg lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, functionality: fully functional, Aluminum silo with a long base ring (flour silo) Technical data / Dimensions Available quantity: 3 Volume: approx. 63,200 liters Container type: Silo Condition: used Food-grade: yes Design: standing Inner diameter: approx. 2,400 mm Outer diameter: approx. 2,500 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 19,000 mm Specific weight of the medium: 0.60 t/m³ Operating pressure: Non-pressurized Material / Properties Material, inner lining: Aluminum Notes: Material: AlMg3 Equipment Base design: Foot ring / base ring Njdpfx Ajzw Nv Tsc Ajlg Number: 1 Mounting: fixed Bottom type, top: Conical bottom Bottom type, bottom: Cone Top: 1 x Roof edge railing with handrail 2 x Crane lugs 1 x Overpressure valve 1 x Strainer on flange DN 1000 with reducer 1 x Flange for level limit indication 2 x Flange for level measurement The connections vary slightly between the three existing silos. Shell: 1 x Manhole DN 500 with star-grip closure 1 x Vent dome DN 500 1 x Access door 850 x 1800 mm 7 x Pipe clamps for filling pipe 1 x Filling pipe, ending in a threaded connection at the bottom 2 x Cable protection conduit DN 50 Bottom: The silo has a 40° cone at the bottom, which ends in a flange DN 1500 for the attachment of a vibratory floor. At the bottom / cone: 1 x Vibratory floor VB 1400 with motor and emergency shut-off slide Notes: The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its function! There are a few weld seams on the base ring (closed connections / openings).

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, pass-through width: 1,400 mm, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm Nljdpsxt Idbefx Ac Aeg

Condition: used, This listing is for a CFS Protemist DT II Automated Protein Synthesizer Abnova presents a new generation, fully automated robotic desktop protein synthesizer, Protemist® DT II, for high throughput eykaryotic protein production. The system is developed and manufactured by CellFree Sciences Co., Ltd. It synthesizes the protein of interest using a special wheat germ lysate and a bi-layer reaction. Protemist® DT II can run two scales of translational reaction, 1.2 ml (24 well) or 6 ml (6 well). Batch affinity purification is available for affinity tagged fusion protein synthesized in 6-ml (6 well) reaction scale. This is an expert system in transcription, translation, and purification. The protocol and automation is designed for easy operation obviating the need for manual handling and production. Specifications Dimensions: 79cm(h) x 50cm(d) x 70cm(w) Weight: 100 kg Power: 100~240 V 50/60 Hz Voltage Fluctuation Tolerance: ±10% Power Consumption: 350 VA Max. Number of Samples Per Run: 6 samples: transcription, translation and affinity purification (6 ml/sample) 24 samples: transcription, translation (1.2 ml/sample) Processing Volumes: 100 ul to 800 ul Reagent Unit: Temperature Control Method: Peltier moduleTemperature Setting: 4°C (Fixed) Dispensing Volume Variation: Within ±5%, CV < 1% (in dispensing 100 µl distilled water) Ambience for Installation: 15~30°C, humidity < 75%, dew condensation to be avoided Nlodpfxsxzh Uco Ac Aog

Year of construction: 2020, condition: used, This listing is for Lancer 1400 LXP Ultima Laboratory Washer Getinge The unit is in full working condition and ready for immediate use The Lancer 1400 LXP is a freestanding, high-capacity laboratory glassware washer and dryer designed for demanding laboratory environments. It features three wash levels, multiple rack positions, automatic detergent and acid dosing, forced-air HEPA-filtered drying and programmable wash cycles. The chamber has a capacity of approximately 304 litres. Manufacturer specifications list external dimensions of approximately 789 x 831 x 1728 mm and a power requirement of 13.5 kW Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Nlsdpfez D Huqjx Ac Aog Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, all stainless steel suitable for thermal oil heating Nljdpfx Aezwlm Isc Aog nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: used, Year of construction: 2022, operating hours: 1,250 h, mileage: 27,235 km, empty load weight: 16,000 kg, Operating hours: 1250, First registration: 24.02.2023 Application: - Maximum gross weight: 16 t - Prepared for sweeper body Main components: - Chassis height: MED (medium) - Standard cab - Wheelbase: 3350 mm - Euro 6 emission standard - Diesel engine, 6 cylinders, 7.7 l, 257 hp / 188 kW, 969 Nm - Exhaust and compression brake, 170 kW / 231 hp - Transmission ZTO1006, 6-speed manual (OD) - Drive axle ratio: 5.13 Equipment packages: - Manual roof hatch - Side sun visor, driver side - Manual air conditioning - Cruise control - DAB audio system, DAB/FM/AM radio, antenna, Bluetooth connectivity, USB, 2 speakers Chassis: - Technical max. front axle load: 5.8 t - Technical max. rear axle load: 10.9 t - AdBlue tank: 32 liters Wheels and tires: - Front tires: 285/70 R 19.5 Goodyear KMAX S - Rear tires: 285/70 R 19.5 Goodyear KMAX D Drivetrain – equipment: - High-level air intake, installed on bracket right behind cab Cab interior: - Right-hand drive - Heated comfort driver's seat with integrated seatbelt - Basic passenger seat - One armrest for driver - Coat hook on rear wall - Forward collision warning with emergency braking (for stationary and moving objects) - Lane departure warning system - Immobiliser, transponder in key - Electric windows on both sides - Reverse alarm - Speed limiter 90 km/h - Metal roof hatch - Steering wheel adjustable in two directions Cab exterior: - Tinted windows - Rear cab wall window - Central locking with remote control - Heated and electrically adjustable rearview mirrors - External sun visor - Headlights with beam adjustment - LED daytime running lights, "V Light" Double-sided dirt intake Body with hydrostatic drive and hydraulic auxiliary drive with HGB2 transmission (V50h/V65h) Engine power: 256 hp / 188 kW (187.9 kW) Application: - Maximum gross weight: 16 t - Sweeper preparation - Diesel engine, 6 cylinders, 7.7 l, 969 Nm - Exhaust and compression brake, 170 kW / 231 hp - Bluetooth phone integration, USB, 2 speakers - Technical max. front axle load: 5.8 t - Technical max. rear axle load: 10.9 t Nljdpfxevt Iyto Ac Asg - Collision warning with emergency braking (stationary and moving obstacles) - External sun visor - LED daytime running lights, "V Light" Standard basic equipment: - Hydrostatic gearbox HGB2 - Max. 1400 Nm and approx. 340 hp - Mechanically switching gearbox integrated into chassis with built-in hydrostat for stepless speed control in sweeping mode - Transport speed 0 - 85 km/h via standard transmission (cruise control optional) - This work drive allows stepless control of sweeping speed forward (1 - 40 km/h) and reverse (1 - 10 km/h) via electronic accelerator pedal (Easy-Drive) - Suction power can be regulated independently of travel speed between ECO and MAX - Fuel tank in sweeper body, approx. 190 l capacity - Hydraulic fan drive - Hydraulic oil tank 50 l - Engine compartment fitted with sound insulation - Fan exhaust routing upwards through container superstructure - Stepless electronic tur...

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes) Nlsdpozlyz Nofx Ac Asg

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Nlsdpszy In Hefx Ac Ajg Price: Upon request

Condition: excellent (used), Year of construction: 1999, CFS 620 | Thermoforming Packaging Machine Brand: CFS Model: 620 Nlodpfsy Hl Ndex Ac Aog Machine number: 625/0118 Year of manufacture: 1999 Power supply: 230 V, 3 phase, 50 Hz Current consumption: 23/25 A Module dimensions: Main module: 3350 mm x 1300 mm x 1900 mm Additional module: 3300 mm x 1050 mm x 1100 mm The industrial CFS 620 thermoforming machine is an advanced unit designed for the automatic forming of packages from rigid or flexible film and for packaging food and technical products. The machine operates in a continuous cycle, performing the processes of lower film forming, filling, vacuum or protective gas flushing, sealing, and cutting of finished packs. Thanks to its modular design with a total length exceeding 6 meters, the unit offers a large loading area and high production efficiency.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Complete Slicing & packing line from CFS & Variovac! CFS-Uni slicer whit check controller / Scale year of construction 2006 updated firmware whit touch display. Variovac Multipower year of construction 2008 built in vacuum pump + booster pump foil wide 542 mm, Rejection 430 mm, MAP machine, ELS Labeling system! Very nice and well maintained line ready to work! Nlsdpfxjxmh Rbo Ac Aog

Condition: new, Year of construction: 2026, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Nlsdpfxjzr Hk Dj Ac Asg Can also be combined with one of our carton sealers on request.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The GEA CFS Autogrind 280 is a powerful industrial grinder built for high-performance applications, particularly in meat processing. Designed to work with frozen blocks up to -25°C Key Features: Enhanced Power: The 117 kW motor delivers increased grinding performance, enabling faster processing of both frozen and fresh meat blocks. Processes frozen blocks at temperatures as low as -25°C without compromising quality or texture. Suitable for a variety of raw materials, including beef, pork, poultry, and fish. The upgraded motor supports even higher production rates, making it ideal for large-scale industrial use. Features a 280 mm throat with robust cutting plates and knife options to ensure uniform particle size. Suitable for fine or coarse grinding, depending on your needs. Integrated block pusher and feeding system reduce manual labor and improve efficiency. Made from stainless steel for easy cleaning and compliance with stringent hygiene standards. Smooth, crevice-free surfaces minimize contamination risks. Minimizes heat generation during grinding to maintain product integrity and comply with food safety regulations. Safety interlocks and overload protection mechanisms safeguard both the operator and the equipment. Intuitive control panel for easy operation and monitoring. Despite its high power, the design is optimized to consume energy efficiently during continuous operation. Processes frozen and fresh meat for various end products such as: Minced meat Burgers Sausages Nuggets Other meat-based products This model is an excellent choice for high-demand production environments requiring consistent quality and reliability. Nedpfovt R A Dsx Ac Ajlg

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. Nodpfx Acsxc E Tro Aslg The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 25156F, Mobile hydraulic tilting lift Wortmann HKV-S | DIN + 2x 240 liters | 1,400 mm For sale: mobile hydraulic tilting lift from Wortmann Milieutechniek, type HKV-S. This tilting lift is equipped with multiple attachments, making it versatile for use with various waste containers. The machine has a DIN attachment for roll-on/roll-off containers and also an attachment that allows two 240-liter containers to be tilted simultaneously. With a pivot point height of approximately 1,400 mm, the tilter is very suitable for emptying containers into, among other things, compaction containers, waste compactors, bins, and other collection systems. The complete installation is mounted on swivel casters, making it easy to move and use in different locations within a company. The moving parts are fitted with safety guards on both sides. Technical specifications: Brand: Wortmann Milieutechniek Type: HKV-S Year of manufacture/overhaul according to nameplate: 2018 Power supply: 400 V Motor power: 3.0 kW Fuse rating: 16 A Pivot point height: approx. 1,400 mm Own weight: approx. 750 kg Max. load weight: 650 kg Color: RAL 7016 Hydraulic drive Mobile design Container attachments: DIN attachment for roll-on/roll-off containers Attachment for 2 x 240-liter containers Hydraulic lifting and tilting system A reliable and flexible solution for companies that want to empty various waste containers at a single, fixed tilting height. The machine is in used condition and can be inspected and tested by appointment. Nlodpfx Acez Ern Ee Asg Please feel free to contact us for more information, pricing, or technical questions. Keywords: tilting lift, container tilter, waste container tilter, DIN tilter, 240-liter tilter, 2x 240 liters, roll-on/roll-off container tilter, hydraulic tilter, mobile tilting lift, container lift, waste processing, compaction container, Wortmann HKV.

Condition: used, mileage: 167,000 km, power: 228 kW (309.99 HP), first registration: 04/2014, fuel type: diesel, wheelbase: 5,340 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, number of gears: 4, emission class: euro5, loading space volume: 25 m³, Year of construction: 2014, Equipment: air conditioning, = Additional options and accessories = Nedpfxsz A Ukqs Ac Aelg - Radio/CD player - Speed limiter = Special features = 0G015925 - HVW1142 DAF CF 75 310 FAG Allisson with VDK MAXlift 3000 25m³ - AE Weighing / superstructure overhaul Suitable for emptying containers from 80 > 5000 liters = More information = MOT (APK): New MOT upon delivery Registration number: hv1142

Condition: refurbished (used), functionality: fully functional, Manufacturer: Marel Model: RevoPortioner TRP600 Year: 2013 Condition: Refurbished Serial number: 10115385 Stock number: 3421 Risco vacuum filler Type: RS505CP 1.5 Serial number: C812038 Year of construction: 2013 Hopper: 350 liters Power: 3 x 400V, 50Hz, 8kW Dimensions: 2450 x 1350 x 2100 mm Weight: 1010 kg Includes accessories cart Marel Revoportioner Type: TRP600 Serial number: 10115385 Year of construction: 2013 Belt width: 600 mm Compressed air: 8 - 10 Bar, 150 Nm³/h Power: 3 x 400V, 50Hz, 9kW Dimensions: 2150 x 1850 x 2050 mm Nlodpfxszqfwae Ac Aog Weight: 1400 kg Elpress drum washing machine Type: TRP700-4742453 Serial number: 10115725 Year of construction: 2013 Hot water: 3 Bar, 60°C, 35-100 L/min Cold water: 3 Bar, 10°C, 35-100 L/min Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16kW Dimensions: 1825 x 1150 x 1650 mm Weight: 550 kg Includes mold roller rack and drum lift

Condition: used, Manufacturer: Tennant Company (USA) Model: M20 Type: Industrial Scrubber-Sweeper (combination machine) Power source: Diesel, LPG, or Battery (depending on version) Cleaning Width: - Main brushes: ~1020 mm (40 inches) - With side brushes: up to 1400 mm (55 inches) Nodowf E Drjpfx Ac Aolg Solution Tank Capacity: 303 liters Recovery Tank Capacity: 360 liters Working Speed: ~8 km/h Approximate Weight (unloaded): ~2,177 kg Approximate Dimensions: - Length: ~2460 mm - Width: ~1220 mm - Height: ~1430 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Nlodpfxsy Tnzce Ac Aeg Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Condition: used, Year of construction: 1998, Manufacturer: CFS Model: HLT10000/1000 Nlodpfx Acjy R S Hqo Asg Year: 1998 Condition: Used Serial Number: 230 Stock Number: 3372B Belt width: 1000 mm Frying length: 9000 mm Heating: Thermal oil, 360 kW Steam: 4 - 8 Bar Compressed air: 2 - 4 Bar Power: 3 x 400V, 50Hz, 30kW Dimensions: 12600 x 2100 x 3400 mm Weight: 10000 kg CIP cleaning, extra long infeed conveyor of 2000 mm