Used Carpigiani Aes 261/Psp for sale (896)

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Ppedpfx Ahew Nadyolot Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: used, 1 mobile screw compressor, KAESER M30PE Operating hours: 48h, serial number 1343-8968028 Color: as shown in the pictures, according to the images and upon inspection Condition: used Psdpfx Asy Tiggehlspt

Condition: used, Compressed Air Refrigeration Dryer, KAESER Type TA 5 Serial No. 2143, Item No. 1.7917.2, Year of manufacture 2002 Pedjy Ra Dwspfx Ahlopt Throughput: 600 liters/min. Operating pressure: max. 16 bar Refrigerant: R134a Charge weight: 0.28 kg Compressed air connection thread: 3/4" Power consumption: 250 Watts Power supply: 230 Volts, 50 Hz, 2 Amps - Condensate drain: DN 6 mm Space requirement (L x W x H): 630 x 500 x 780 mm Weight: 70 kg In good condition

Condition: new, Year of construction: 2026, New Kaeser after-compressor N153-G (10/40) with ball valve and pressure switch on the inlet side Pedpfxswl Icdj Ahljpt with ball valve and pressure switch on the outlet side with check valve Time of delivery: 6 Wochen Technical Data:Inlet pressure: 10 bar Outlet pressure: 40 bar Pressure ratio: 3.7 Flow rate: 0.89 m³/min Min. ambient temperature: 2 °C Max. ambient temperature: 40 °C Compressor block speed: 650 rpm Number of cylinders: 2 Rated power of drive motor: 4.0 kW Efficiency class of drive motor: IE3 Protection class of drive motor: IP 55 electrical supply: 400 V / 3 / 50 Hz Sound pressure level: 74 dB (A) Compressed air connection on the inlet side: G 3/4" Compressed air connection on the outlet side: G 1/2" Dimensions W x D x H: 1390 x 720 x 820 mm Weight: 255 kg Visit our store.We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment - Compressed air aftercooler design: finned-tube type Podpfezaaqzjx Ahlopt - Oil supply: via oil pump - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Compressed air inlet connection: G 3/4" Compressed air outlet connection: G 1/2" Visit our store.We always have a large selection of new and used compressors in stock!

Condition: excellent (used), Year of construction: 2008, operating hours: 22,795 h, functionality: fully functional, machine/vehicle number: 5039, overall weight: 600 kg, power: 18.5 kW (25.15 HP), type of cooling: air, Equipment: documentation/manual, type plate available, Frequency-controlled screw compressor with integrated heat recovery Manufacturer: Kaeser Type: ASD 32 Delivery rate: 8 bar - 3.2 m³/min Motor power: 18.5 kW Compressed air connection: G 1¼ Max. available thermal output: 16.4 kW Includes complete documentation + CE certificate Podpfx Ajw Trghjhlept Next maintenance at 24,360 operating hours Weight: 600 kg Required space: 1350 x 921 x 1505 mm (L x W x H) The machine can be demonstrated on site. All information subject to change. Prior sale reserved.

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, control type: manual, actuation type: hydraulic, total height: 2,400 mm, total length: 2,700 mm, total width: 3,300 mm, Equipment: rotational speed infinitely variable, JAESPA W 500 HA – Semi-automatic horizontal bandsaw For sale is a robust and powerful horizontal bandsaw machine from the German manufacturer JAESPA Maschinenfabrik. The machine is ideally suited for industrial use in the steel, metal, and mechanical engineering industries. Technical data: * Manufacturer: JAESPA * Model: W 500 HA * Machine No.: 90 9947 * Saw band length: max. 6700 mm * Machine type: Semi-automatic horizontal bandsaw * Cutting range, round: approx. Ø 500 mm * Cutting range, flat: approx. 800 x 500 mm * Miter cuts possible * Hydraulic feed Includes 5 new saw blades Ppjdpfx Ajy T Efxohlst Condition: Used, with typical signs of wear and tear commensurate with its age. The machine was last used recently. Sold as is, after inspection. Space requirement: 2700 x 3300 x 2400 (L x W x H) Weight: approx. 3700 kg

Condition: repair required (used), Year of construction: 2006, Screw Compressor Manufacturer: Kaeser Model: DSD 201 SFC Year of manufacture: 2006 - Frequency converter defective – Not operational Power: 110 kW Pjdpfx Aoy Sgldohlept Pressure: 10 bar

Condition: excellent (used), Year of construction: 2008, Refrigerated dryer Manufacturer: Kaeser Model: TE 121 Year of manufacture: 2008 Pedpfx Ahey Sgh Eolopt Volume flow: max. 12.7 m³/h

Condition: excellent (used), Year of construction: 2008, Screw Compressor Manufacturer: Kaeser Model: ASD 32 Year of Manufacture: 2008 Load Hours: approx. 29,050 h Idle Hours: approx. 47,458 h Free Air Delivery: 3.2 m³/h Power: 18.5 kW Pressure: 8 bar Pjdpfxoy Sghfe Ahlspt Air-cooled, can be converted for heat recovery.

Condition: excellent (used), Year of construction: 2008, Screw Compressor Manufacturer: Kaeser Model: ASD 32 Year of manufacture: 2008 Load hours: approx. 32,337 h Idle hours: 47,455 h Volume flow: 3.2 m³/h Pressure: max. 8 bar Power: 18.5 kW - Panel damage at rear Ppjdpfx Ahjy Sgguelet - Air-cooled, but can be converted to heat recovery

Condition: like new (used), Year of construction: 2024, operating hours: 359 h, functionality: fully functional, machine/vehicle number: 1384 - 10024378, overall weight: 295 kg, total length: 1,090 mm, total width: 630 mm, total height: 1,100 mm, motor manufacturer: Super Premium Efficiency IE4, IP55, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 56.4 m³/h, operating pressure: 7 bar, pressure (min.): 7 bar, pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 62 dB, protection type (IP code): IP54, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a Kaeser Aircenter SM 10 screw compressor in very well-maintained condition with low operating hours. The unit is a compact, ready-to-use compressed air station featuring an integrated refrigeration dryer (ABT15) and an oil separator with pressure gauge, making it ideal for industrial applications and workshops. The system received its initial and scheduled maintenance in December 2025. All documentation and paperwork are available. The compressor is immediately operational and can be inspected under power by arrangement. Ppodpfsyvkamjx Ahlet

Condition: used, Year of construction: 2018, Horizontal bandsawing machine Ppodpfjudb Sfox Ahlot Make: JAESPA Model: Compact 2.8 Year of construction: 2018 TECHNICAL DETAILS: Automatic band saw - horizontal Cutting diameter 280 mm Saw blade length 5080 x 34 x 1.1 mm Cutting area flat 330 x 280 mm Cutting width 330 mm NC control Feed 460 mm Cut-off lengths 9999.9 mm Speed 15 - 120 m/min Machine weight approx. 2.3 t Dimensions approx. 3250 x 1580 x 2050 mm Column design for heavy-duty, industrial use o Intuitive NC control of the machine via PLC WAGO and 7" color touchscreen. Frequency-controlled, infinitely variable belt drive Saw arm with highly sensitive feed movement via servo motor and ball screw ball screw Backlash-free linear guides in both columns Hydraulic material clamping with long-stroke cylinder in front of and behind the saw blade saw band Clamping vice and lifting jaws open on both sides with infinitely adjustable clamping pressure clamping pressure Material feed via servo motor and ball screw drive in chain dimension the repeating operation is clocked. Unlimited material feed length Fully hydraulic saw blade tensioning Automatic saw blade guide arm adjustment Fully equipped with chip conveyor

Condition: good (used), Year of construction: 2013, Kaeser TAH7 Pedewhvqzepfx Ahlspt Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 0,60 m³/min

Condition: excellent (used), Year of construction: 2025, axis stroke (X,Y,Z) 2500 x 1300 x 180 mm mm Number of spindle head vertical 1 St. Dust suction hood 120 mm Number of milling agregates 1 St. Ppedpfx Asy N D Rxohljt total power requirement 4,3 kw Weight 1500 kg Dimensions (L/W/H) 3800 x 2300 mm Motor output 2,2 kW Capacity 100 kg/h

Year of construction: 2008, operating hours: 25,000 h, condition: excellent (used), functionality: fully functional, construction height: 1,865 mm, nominal power: 45 kW (61.18 HP), pressure (max.): 8 bar, rotational speed (max.): 2,965 rpm, machine/vehicle number: 3887, FAD: 8.26 m3/min at 7.5 bar New oil cooler Equipped with heat recovery system KAESER Energy-Saving SIGMA PROFILE Direct drive Serviced with original parts by KAESER dealer Ppedpfx Ahjy H R N Nelst

Condition: new, functionality: fully functional, overall weight: 3,396 kg, color: yellow, fuel type: diesel, fuel tank capacity: 350 l, motor manufacturer: Cummins, total width: 1,990 mm, total height: 2,037 mm, power: 210 kW (285.52 HP), pressure (max.): 10.3 bar, mobility: mobile, Year of construction: 2024, machine/vehicle number: WKA035042R9826703, Equipment: AdBlue, New mobile compressor M 255 Unused M255 with option B (aftercooler + cyclone separator + reheater) Country of installation: Belgium Type: M255 Max. operating pressure: 10.3 bar Lighting EG-12V: 13-pin socket PL quality / components: NK + ZK + WT PL quality at outlets: B | B | B | B Connection dimensions: KK | KK | KK | G2 Non-return valve: yes (integrated) Water separator for fuel: yes (integrated) Pedsy Hplijpfx Ahlspt Chassis configuration: Tandem axle Chassis height adjustable Chassis with overrun brake Chassis with handbrake Chassis with support wheel Chassis, 1st towing eye, ball coupling, ø 50 Effective total weight: 3,396.0 kg

Condition: used, Year of construction: 2014, Vertical band saw machine Brand: JAESPA Model: MSU 4 Machine No. 23690.14 – workshop tested Year of manufacture: 2014 Infinitely variable band speed from approx. 16 to 2,200 m/min Saw band length: 3,450 – 3,640 mm Saw band width: up to max 20 mm Accessories: - IDEAL band welding unit with electronic annealing current regulation with shear and grinding motor - Chip blow-out device with stepless adjustment - Brass chip cleaning brush new and included as spare - CE conformity declaration - Operating manual Pjdpfsy E Iwusx Ahlspt Safety equipment: - Main emergency stop switch - Emergency stop switch - Band wheel doors electrically secured - Saw blade guard - Limit switch for saw band breakage Used as seen, without warranty The machine technically conforms to current safety regulations.

Year of construction: 2011, condition: ready for operation (used), A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement. Podpfey Taunsx Ahlopt

Condition: new, functionality: fully functional, Details: Manufacturer: KAESER Item: Oil Separator / Oil Separator Cartridge Part number: 6.2013.0 Size: Ø 275 x 462 mm Condition: New, in original packaging (OVP) Quantity: 2 units available Application: For KAESER screw compressors Maintenance / Service / Spare part Psdpfx Aey E Rxnjhljpt Advantages: Original KAESER spare part Immediately available Ideal for stockpiling or maintenance

Condition: excellent (used), Year of construction: 2010, operating hours: 19,128 h, functionality: fully functional, Screw compressor Kaeser CSD122 Ppjdey Ni E Iepfx Ahlet 75 kW 8 bar 12.01 m3/min Year of manufacture: 2010 Operating hours: 19,128

Condition: new, functionality: fully functional, power: 15.5 kW (21.07 HP), fuel type: gasoline, color: yellow, operation weight: 205 kg, Year of construction: 2026, Kaeser Mobilair M17 Construction Compressor incl. DLA (A) NEW Kaeser Mobilair M17 Construction Compressor incl. DLA (A) – NEW | 1.0 m³/min Free Air Delivery | 15 bar Operating Pressure | Honda GX 630 Petrol Engine Technical Data: Manufacturer: Kaeser Model: Mobilair M17 Condition: NEW Operating Pressure: max. 15 bar Free Air Delivery: 1.0 m³/min Engine: Honda GX 630 petrol engine Engine output: 15.5 kW Tank capacity: 20 liters petrol Compressed air connection: 1 x G 1/2 Operating weight: 205 kg Transport frame: with carry handles Equipment: Compressed air aftercooler DLA (A) & condensate separator incl. connection hoses Starting system: Electric start Highlights & Features: - Compact high-pressure compressor for versatile construction site applications - Honda petrol engine – powerful & reliable - 15 bar operating pressure – ideal for specialized applications - Aftercooler & condensate separator – for dry compressed air - Transport frame with carry handles – easy handling - G 1/2 connection – compatible with standard compressed air systems - Made by Kaeser – proven quality & immediately available Areas of Application: ✓ Operation of high-pressure pneumatic tools ✓ Road and civil engineering ✓ Fiber optic expansion ✓ Municipal operations & maintenance ✓ Construction companies, landscaping & utility services ✓ Infrastructure & renovation projects Location: Depot at D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international on request Pricing: Ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded More compressors & sizes available! ➡️ Mobile & stationary compressors, pneumatic tools, hoses & accessories Kaeser compressor for sale | Mobilair M 17 NEW | High-pressure compressor 15 bar | Compressor with Honda GX 630 | 1 m³/min free air delivery | Compressed air for construction sites | Kaeser compressed air technology | Compressor with aftercooler & condensate separator Your reliable partner for compressed air & construction equipment: Pedpfsy Ipc Djx Ahljpt Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Contact us now & secure immediately available new equipment! If required, we are happy to offer a virtual inspection of the machine via video call.

Condition: excellent (used), power: 14 kW (19.03 HP), fuel type: diesel, fuel: diesel, Year of construction: 2016, operating hours: 604 h, ARBEIT PRIMA Ppedsw Ih N Uopfx Ahlot KUBOTA 3-cylinder engine 7 BAR Flow capacity: 3,600 l/min = Additional information = Year of manufacture: 2016 Intended use: Construction Throughput: 3,600 l/min Technical condition: Very good Visual condition: Very good Serial number: WKA0N0500G5744803 Please contact Thierry Leemans for more information.

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. Pedpjxc Rmqofx Ahljpt High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Dishwasher / dishwasher Model: D 500 Stainless steel version Universal dishwasher 3/5 min rinsing time 1 plate basket, 1 universal basket 500 x 500 and cutlery insert Output: 12 baskets / hour with drain pump Detergent and rinse aid dispenser Connection 230V, 2.58kW, Schucko plug Dimensions: 550 x 605 x 830 - 860mm, WxDxH Demonstration / NEW machine Ppjdshfhhgepfx Ahlot with warranty Visit our large bakery machines warehouse!