Used Bruderer Automatic Punching Press for sale (33,375)

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Dwodpohlnzksfx Aa Isc Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Paper punching machine (for creating perforations) for WIRE-O spiral binding. The device is designed for continuous operation and heavy-duty use. The machine has 2 tools for punching 3:1 holes, 4x4 mm square. After the holes are punched, the sheets fall onto a collecting table at the end of the machine. Quick and easy tool change (5 minutes). Djdpezuzxhofx Aa Iswc Maximum sheet size for punching: 550x500 mm, minimum 150x150 mm. Power supply: 1.5 kW, dimensions: 2800x1200x1250 mm, net weight: 950 kg. A video demonstrating the machine's operation can be sent upon request.

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Dwodpfsz Dxiaex Aa Isc Control system: SIEMENS S7 Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Clear text display Press force monitoring Wire straightening device Bosch stripping devices Mounting and brush motor with integrated tool W32/1-32 Soundproof cabin Barrel for CU wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Press force / stamping unit: 200 kN Longitudinal feed: 250 mm Strip width (longitudinal): 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Dodeh I Nrqjpfx Aa Iswc More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 131 720, total height: 4,120 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 2,600 mm, total length: 3,600 mm, drop-through hole in table: 1,200 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 160 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 650 mm, distance between stands: 1,600 mm, overall weight: 35,000 kg, control voltage: 24 V, input frequency: 50 Hz, ATTENTION: The machine is currently partially disassembled. The control panel and switch cabinet have been scrapped. Components can be inspected. Before delivery in 2026/2027, the machine will undergo a complete mechanical and electrical overhaul. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Working height: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm Dwjdpfxozrxbuo Aa Ijc The machine is currently not operational.

Condition: used, Automatic Signature Punching Machine / Automatische Stanzmaschine JAMES BURN Lhermite EM 520 Baujahr / Year 1998 - Serial-No. 211661 Format Einlaufbreite / Size Infeed width 520mm Materialdicke / Thickness max. 3mm (32 pages 80 gr) Geschwindigkeit / Speed max. 10.000cycles/h Papierstärke / Paper thickness 70 to 300 gr.  James Burn Lhermite EM520 is an Automatic Signature Punching Machine.  It can be used for inline or offline production. With Feeder and Jogger delivery. The EM520 features the state of the art modular system for  Dsdpfjz H Ayhex Aa Iswc punching and cutting signatures in line  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Hoza EMU Die-Cutting Machine This machine is ideal for die-cutting small parts from paper, rubber, or textile materials. It has a high pressing force and can be placed on any stable table. The cutting process is initiated via a two-hand safety control. Forged blades or band steel cutting dies can be used in the machine. Blade stroke: 30 mm Max. die-cutting format: 150 x 100 mm Weight: approx. 150 kg Color: hammer-tone blue Dimensions: 450 x 360 x 600 mm Dwsdpfx Aasuzhmtj Ijc You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Djdpfx Aaezil S Io Iewc Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Dedpsz Dn Huofx Aa Iowc Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) Dwsdpfsy I Tq Ssx Aa Isc - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface Dodez Imc Nepfx Aa Iewc 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: used, Year of construction: 2003, Manufacturer: Haulick + Roos GmbH Type: RVD 3000-2500 Machine Type: High-performance stamping press Year of manufacture: 2003 Condition: used Rated pressing force: 3,000 kN Pressing force: 300 t Stroke frequency: 20–180 strokes/min Dwodpfx Aaszrz Dxs Iec Drive power: 80 kW Ram stroke: 20–160 mm Ram adjustment: 150 mm Tool installation height: max. 450 mm Maximum tool length: 2,500 mm Maximum tool width: 1,000 mm Table area: 2,450 × 1,000 mm Ram area: 2,500 × 950 mm Clamp plate opening: 2,250 × 350 mm Machine weight: approx. 46,000 kg Strip feed direction: right to left Power supply: 400 V Frequency: 50 Hz Maximum connected load: 80 kVA Maximum fuse rating: 250 A Draw cushion: not available Components of the system: Haulick + Roos high-performance stamping press RVD 3000-2500 DIMECO coil unwinder, type 23S1/D/VV Year of manufacture: 2003 Weight: 1,450 kg Maximum load capacity: 4,000 kg DIMECO roller feed, type 1681/17/BVV Year of manufacture: 2003 Weight: 540 kg ARKU straightening machine Technical data for roller feed: Strip width: 5–420 mm Strip thickness: 0.1–5 mm Maximum strip cross-section: 1,000 mm² Strip speed: up to 125 m/min Feed length: 0.1–999.9 mm Feed accuracy: ±0.1 mm Roller diameter: 100 mm Strip height adjustment: 100 mm, manual mechanical Note: The ram guide should be replaced. The system is currently still in operation and functional. A quote from the manufacturer for complete disassembly and installation of new guides is available for approximately €200,000. We will gladly provide videos of the system in operation upon request.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 255100, punching force: 20 t, total height: 2,150 mm, total width: 2,900 mm, total length: 4,900 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, working range: 1,270 mm, type of input current: three-phase, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, overall weight: 11,000 kg, input current: 40 A, input frequency: 50 Hz, table load: 75 kg, feed rate X-axis: 82,000 m/min, feed rate Y-axis: 82,000 m/min, feed rate Z-axis: 82,000 m/min, travel speed (max.): 82,000 mm/min, input voltage: 400 V, AMADA EUROPE 255 CNC Punching Machine CNC turret punching machine AMADA EUROPE 255, year 1999, equipped with a GE Fanuc Series 18i-P CNC control. Dsdpfezw Ui Esx Aa Iewc The machine is installed and available for inspection and demonstration while powered on, by appointment. Technical specifications: Manufacturer: AMADA EUROPE Model: EUROPE 255 Year of manufacture: 1999 CNC control: GE Fanuc Series 18i-P Punching force: 200 kN (20 t) Working range X x Y: 1,270 x 1,270 mm Maximum sheet thickness: 3 mm Table load: 75 kg Turret: 27 stations Maximum positioning speed: 82 m/min Power supply: 400 V / 50 Hz / 3-phase Nominal current: 40 A Installed power: 29 kW Machine dimensions: approx. 4,900 x 2,900 x 2,150 mm Machine weight: approx. 11,000 kg CE marked The machine is currently installed and can be inspected while powered on. Available immediately. Inspection by appointment. Location: Greece

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Djdez Ahanepfx Aa Iewc Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Dwodszab Ibjpfx Aa Ijc Strip width: up to 320 mm Strip thickness: 0–4 mm

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) Dsdpowag Riefx Aa Iswc ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: used, machine/vehicle number: 4131, Item No. Lg 34422 High-performance stamping press BRUDERER BSTA 60 H from current production. Stroke adjustment needs to be repaired. without soundproof cabin and without conveyor system. Feeder BBV 202/120 Djdpfxjinzdlj Aa Iewc

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Dwodpfx Aaszxgglj Ioc Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 745-006-1, total height: 4,050 mm, ram adjustment: 60 mm, total width: 1,650 mm, total length: 3,000 mm, drop-through hole in table: 160 mm, pressing force: 100 t, distance between side stands: 420 mm, overall weight: 16,000 kg, year of last overhaul: 2014, Raster die-cutting machine Stroke rate: 20 - 220 Table area: 700 x 1000 Stroke adjustment: 20 - 90 mm Unidor Compact Press CE 2014, complete system Weight: approx. 16,000 kg Dwsdez Ekvuopfx Aa Isc Accessories: Raster roller feed Kemmerich strip feeding system Safety fence

Condition: excellent (used), Here, we offer you a TOX full-punch riveting system. TOX full-punch riveting system, type TZ-VSN. The full-punch rivet first severs all joining partners and then punches the rivet button out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, expands its range of products and services with a forward-looking process. Full-punch riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, clamp and tool holders are also designed to be universal, so that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand clamps and TOX robot clamps. Type TZ-VSN Press force 55 kN Total stroke 140 mm Djdpfx Aezdtffja Iswc Rivet type: diameter 5x4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed by email or fax.

Condition: used, functionality: fully functional, machine/vehicle number: 05073 81 767 830, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender KL 1300 Dsdpfx Aasy Tim Hs Iswc Price: 3000 Euros

Condition: used, Year of construction: 2001, functionality: fully functional, The Schaal SEP 80 is a 80-ton eccentric press designed for precision stamping and forming. Its Unidor electronic control system ensures repeatable stroke accuracy and fast setup, while the integrated tool safety device protects dies from damage caused by misfeeds or incorrect part positioning — reducing downtime and tooling costs. The machine features a rigid double-column O-frame in vibration-damping cast iron, 6-point play-free roller ram guidance, and a flywheel drive with pneumatic clutch/brake combination. It comes equipped with a gripper feeding device SZV 302 feed unit for automated strip feeding. Pressing force: 800 kN (80 tons) Strokes per minute: 60 – 320 min⁻¹ Ram stroke (adjustable): 8 – 80 mm Ram adjustment: 80 mm Ram surface: 700 × 500 mm Table size (clamping plate): 830 × 700 mm Clamping plate thickness: 80 mm Dsdpfozhw Huox Aa Ijwc Table opening: 500 × 200 mm Strip feed clearance: 120 ± 40 mm Feed unit: Schaal SZV 3 Strip width: 10 - 270 mm Thickness: 0 – 4 mm Drive power: 21.5 kW Weight: 8,000 kg Footprint: 1,500 × 2,000 mm, height: 2,885 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 19,269 h, functionality: fully functional, BSTA 41, with 2x BBV 202/120+ scrap shear complete refurbished by Bruderer Swiss in 2007, CE conversion possible Contact us! Dwedpfx Aozlqi Dea Isc

Condition: good (used), functionality: fully functional, actuation type: hydraulic, punching force: 70 t, punching diameter: 28 mm, throat depth: 500 mm, overall weight: 1,600 kg, Used hydraulic punching machine Djdpsznh Shofx Aa Ijwc Brand: GEKA Model: HYD 70-SD Serial number: 3659 Throat: 500mm Cutting capacity: - L 90º: 130x130x13mm - Plate: 450x13mm - Round: 45mm - Square: 45mm - Notched: 250x250x6mm Maximum punching size: 28x20mm Tonnage: 70T Includes punches and dies as shown in the photographs. *Machine has been completely inspected and is in perfect working order.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HT-120T, total height: 1,990 mm, total width: 800 mm, total length: 1,600 mm, pressing force: 90 t, stroke length: 80 mm, overall weight: 1,500 kg, DGUV certified until: 09/2026, Digima HT-120T 900 kN punching machine Professional hydraulic machine for punching, notching, bending, and processing steel components. The HT-120T is a high-performance hydraulic punching machine designed for intensive use in manufacturing plants, blacksmith shops, structural engineering facilities, and workshops engaged in metalworking. The machine allows for punching holes in sheets, flat bars, tubes, and profiles, as well as notching tubes, bending steel components, processing corners, and preparing parts for further assembly or production. Tube Notching The machine enables notching tubes and preparing them for further joining or assembly. Punching Holes in Tubes The HT-120T allows for punching holes in tubular elements and steel profiles. Bending Flat Bars With the appropriate tool, the machine can operate as a press for bending flat elements. Bending Angle Bars The device supports the processing of angle bars and the preparation of structural components. Processing Radius Corners The machine enables shaping corners and producing repeatable elements with a specified radius. Punching in Plates The HT-120T allows for punching round, oblong, and other shapes in steel plates and sheets. Punching in Profiles The machine is suitable for punching in angle bars, profiles, and structural components. Rounding Corners The device allows for processing the corners of parts, improving their aesthetics and preparing them for assembly. Double-Sided Edge Rounding The HT-120T enables processing edges and rounding components on both sides, depending on the tooling used. Technical Specifications: Dwjdpfxsz Arruo Aa Isc Model: HT-120T Maximum punching thickness: 20mm Maximum punching diameter: 30mm Pressing force: 900kN Throat depth: 350mm Maximum stroke: 80mm Number of strokes: 8-20 strokes/min Motor power: 5.5kW Overall dimensions: 1600x800x1990mm Machine weight: 1500kg HS Code: 8462490000