Used Biesse Cnc Machining Center for sale (67,833)

Year of construction: 1997, condition: good (used), Ibarmia CNC machining center offered. Ppsdpfx Ahsh Hp Unjlst Type: ZVL 3000 Control unit: Heidenhain TNC 426 CB X-travel: 2200 mm Y-travel: 800 mm Z-travel: 600/800 mm Table: 850 x 2600 mm Weight on table max: 3500 KG Spindle: SK 40 with cooling Speed max: 4000 RPM Toolchanger: 40 pieces Power: 47 KW Included: documentation, parameters, toolholders, chip conveyor and central lubrication system Year: 1997 Dimensions: 625x305x340 cm LxWxH Weight: ca 12000 KG Movie available! For more information call us or send an e-mail.

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Ppodpjy N Du Djfx Ahljt Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, total height: 1,900 mm, total length: 2,400 mm, total width: 1,700 mm, table width: 1,000 mm, table length: 1,250 mm, overall weight: 750 kg, spindle speed (max.): 20,000 rpm, IMES-ICORE FLATCOM 40 VH CNC machining center - Z clearance: 200 mm - T-slot clamping table: 1250 x 1000 mm Pjdsy Iyu Rjpfx Ahlopt - For further technical data, see images - Supplied with documentation and accessories Important note: The tool changer is not installed! Attention: The item must be collected bindingly between 16.06. and 18.06.2026 on a date yet to be agreed. FCA D-22085 Hamburg – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 802977, travel distance X-axis: 1,020 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 240 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 60,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total width: 1,900 mm, total length: 2,200 mm, overall weight: 1,000 kg, DATRON M8A CNC Machining Center/Machining System - X-axis travel: 1020 mm - Y-axis travel: 800 mm - Z-axis travel: 240 mm (with tool changer, 700 mm usable on Y-axis) - Equipped with precision high-frequency spindle, speed range: up to 60,000 rpm Podpoy Iytmjfx Ahlopt - With direct shank clamping - Includes a wealth of accessories - Supplied with an additional plate, plate dimensions: 460 x 250 x 20 mm - Comes with milling cutters and drills, technical documentation, a dividing head, and a small tailstock, three-jaw chuck diameter: approx. 125 mm Note: The item must be picked up on a confirmed date between 16.06. and 18.06.2026, to be coordinated in advance. FCA D-22085 Hamburg – loaded onto truck

Condition: used, Year of construction: 2007, KIWA JAPAN KH-45 Horizontal center 4 axes Fanuc 31i control Year 2007 XYZ -640 x 610 x 680 Ppodpfx Ahevnzgiolet B-360 degrees Table 400 x400 Magazine 60 tools Taper BT40 Spindle 12000 rpm Spindle motor 22.4 kw Machine dimensions 4540 × 2400 x 2584 length width height Weight 9200 kg

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. Pedoytrgzepfx Ahljpt The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: excellent (used), Year of construction: 2008, Used CNC machining center Manufacturer: IMA Pedpfx Ahoy Nzw Njlspt Model: BIMA 300 125/430 Year of manufacture: 2008 4-axis CNC machining center with console table 8 supports in X, manually adjustable, 3 vacuum cups per console, vacuum pump 90 m³/h vacuum connection for templates LED display for vacuum cup position indication Working area X: 200 – 4300 mm Working area Y: 0 – 1400 mm (milling/drilling), Working area Z: 12 – 125 mm (clearance 150 mm) Additional central stop row 14 vertical drilling spindles + 6 horizontal horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 7.5 kW up to 18,000 rpm with C-axis 360° interpolation, liquid circulation cooling – 18-position tool changer mounted on the Y-support Edge banding unit VT 100, four-sided/all-around – rotation range 740 degrees with 2-position roller magazine, automatic granule feed Adapter units: – fixed saw 90° – 4-spindle angle head Control ICOS open 231 with 17″ TFT UPS ImaWop 10.0 incl. MDE and production list software Safety fence on right side and foot mats at front; Rear: requires wall installation or separate safeguarding

Condition: good (used), Manufacturer: Deckel MAHO Year of manufacture: 1996 Type: DMU 50 V Machine number: 21503700 Control system: DMG Operating hours: 17,185 h Spindle hours: 6,720 h Table: Rotary table with swivel axis Size: 500 mm diameter x 380 mm Swivel range: 180° Table load capacity: 200 kg Pjdpfx Aey Uckzshljpt Travel ranges x-y-z: 500 – 380 – 380 mm Spindle connection: SK 40 Tool changer: 24 positions (2 x 12) Spindle speed: 20 to 8,000 rpm, continuously programmable Spindle power: 10 / 15 kW Feed rate: 0 to 10 m/min, continuously programmable Rapid traverse: 30 m/min Accessories: separate coolant system Chip conveyor Condition: good Connection: 36 kW Machine dimensions: 3,000 x 2,100 x 2,300 mm Coolant system dimensions: 1,600 x 2,000 x 1,800 mm Weight: approx. 4.5 t

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable Podpfxswka Upe Ahlopt - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: ready for operation (used), A CNC vertical machining center Sigma is available. Travel X/Y/Z: 850mm/480mm/580mm, table dimensions X/Y: 1000mm/540mm, max. table load: 7000kg, tool positions: 40, tool holder: SK40, speed: 12000rpm, power: 15kW, torque: 15kW. Machine dimensions X/Y/Z: approx. 3900mm/2200mm/2850mm, weight: approx. 6500kg, control: Heidenhain TNC 426M, operating hours: approx. 15855h. Including chip conveyor and internal coolant supply. Documentation available. An on-site inspection is possible. Ppsdey S A N Ejpfx Ahlst

Condition: ready for operation (used), Year of construction: 2001, A horizontal CNC machining center Makino is available. Travel path X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. workpiece weight: 500kg, indexing: 0.001°, rapid traverse: 84m/min, feed rate: 50m/min. Machine dimensions X/Y/Z: approx. 4650mm/1950mm/2850mm, weight: approx. 8600kg, control system: Fanuc System 16iM/Makino Professional 3. Documentation available. An on-site inspection is possible. Podpfx Aey S A Nrehljpt

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: VMX1-06203123BEB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, rapid traverse X-axis: 19 m/min, rapid traverse Y-axis: 19 m/min, rapid traverse Z-axis: 13 m/min, nominal power (apparent): 13 kVA, controller manufacturer: HURCO, controller model: ULTIMAX, total height: 2,600 mm, total length: 2,500 mm, total width: 2,000 mm, table width: 355 mm, table length: 760 mm, table load: 340 kg, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, HURCO VMX 1 CNC vertical machining center - Note: Without the vises shown in the photos! Attention: The item must be collected between 23.06. and 25.06.2026 on a date to be arranged. Ppodpfjy Iwnzex Ahlet FCA D-73230 Kirchheim Teck – loaded onto truck

Condition: used, Year of construction: 2011, total height: 3,000 mm, total length: 5,000 mm, total width: 3,000 mm, overall weight: 12,700 kg, spindle motor power: 18,000 W, DMG DECKEL MAHO DMF 180 travelling column machining center,equipped with Heidenhain iTNC 530 control.Machine equipped with 40 bar through-spindle coolant (IKZ), 60-position tool magazine (chain type with double gripper), chip conveyor, electronic handwheel, air blast through spindle, M&H infrared probe and full enclosure.Table size approx. 2,100 x 700 mm.Operating hours: control ON approx. 63,700 h, machine ON approx. 22,500 h, cutting time approx. 7,750 h Weight approx.: 12,700 kg Travel X-axis: 1800 - mm Grinding spindle speed: 14000 - rpm Spindle performance: 18 kW Control: Heidenhain iTNC 530 ShopMill Ppjdpfx Ahjy Tkdgolst Travel Y-axis: 700 - mm Tool Changer: Yes Dimensions (LxWxH) approx.: 5000 x 3000 x 3000 mm Tool holder type: SK 40 Travel Z-axis: 700 - mm Year of construction: 2,011 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Ppjdpfepqx H Tjx Ahlst Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 12071602, We are offering this very well-maintained ARIX V450 CNC 5-axis machining center, year of manufacture 2012. Model: V450 Voltage: 400 V Phases: 3 Input power: 12 kVA Spindle power: 7.5 kW Ppodpjyybx Isfx Ahlst Spindle speed: 8000 rpm Serial number: 12071602 Date of manufacture: 2012-07 Weight: 3500 kg Required installation area: 2.7 m (front width), 2.3 m depth, 2.5 m height !!!!! Please refer to the detailed description in the attached PDF. !!!!! If you have any questions or require further information, feel free to send us a message or give us a call.

Year of construction: 2012, condition: excellent (used), CNC profile machining center Elumatec, type: SBZ122/33, year of manufacture: 2012 Technical data: Working area X – 3850 mm, Y - 350, Z - 280 mm Electric spindles 6 kW - max. 24000 rpm Tool holder HSK -63 F Spindle in very good condition Spindle operating hours: 1634 h Tool changer: 1 position for angle head, 5 x tools Work table with 4 clamps and positioning (automatic) Pneumatic clamping system Light curtain Mobile operator terminal Freestanding control panel Barcode scanner USB port Operating software: Windows 7 Embedded Production software: EluSoft, EluCAM Numerical control: Ferrocontrol - Gateway Protective fence on the left and right with door Automatic and centralized lubrication of the linear guides Weight approx. 1900 kg Pedpfxsy Rfx Hj Ahlspt Total connection value approx. 14 kW Machine dimensions 4,670 x 2,000 x 2,540 mm Space requirement 5,665 x 3,000 x 2,540 mm (Subject to changes and errors in the technical data, as well as prior sale)

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Psdpfx Ahoy H Er Ejlopt Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Podpfxjy H Epwo Ahlspt Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Ppsdey Hrpdopfx Ahljt Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment. Translated with (free version)

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Podpfx Asyymz Ushlopt Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: new, Year of construction: 2026, TECHNICAL SPECIFICATIONS ZOPO V10-B X-axis travel 1,000 mm Y-axis stroke 620 mm Z-axis travel 630 mm The distance spindle nose to table 120 ~ 750 mm T-channels 5 x 18 T channel distance 100 mm The size of the working area of the table 1,200 x 600 mm Maximum weight per table 800 kg Spindle taper type BT 40 Main axis motor power (30 min./continuous) 15/11 kW Main shaft motor torque S1 - 52,5 Nm / S2 - 95,5 Nm / S3 -118, Nm Main shaft transmission Direct drive Maximum speed of the main shaft 12,000 rpm SPECIFICATION OF X, Y, Z AXES Rapid feed on the X/Y axis 36 m/min Rapid feed on Z-axis 32 m/min Maximum feed X/Y/Z axes 10,000 mm/min X/Y axis motor power (Torque) 3 kW (20 Nm) Z axis motor power (Torque) 3 kW (36 Nm) ATC TOOL SHOP (automatic tool change) Tool magazine type With arm Tool magazine capacity 24 Tool holder type BT 40 Tool change time 2.5 sec. ACCURACY X/Y/Z positioning accuracy ± 0.008 mm X/Y/Z repeatability ± 0.005 mm MACHINE DIMENSIONS Length x width 2,850 x 2,450 mm Height 2,850 mm Weight 6,800 kg Ppedjiyyypopfx Ahlet ACCESSORIES INCLUDED IN THE PRICE Fanuc 0i-MF controller with 10.4˝ color LCD monitor Main shaft with direct coupling (Direct Drive), motor 11/7.5 kW and maximum speed 12,000 rpm 3 axes controlled simultaneously Linear guides with rollers on the X, Y, Z axes 45mm Tool magazine with arm with 24 positions Cooling unit with tank Oil spindle cooling system Spindle air blowing system Air gun System for separating oil from the coolant (Oil Skimmer) Chip conveyor with chain Closed electrical panel with air conditioning Communication interfaces for programs and data: RS 232 interface, CF card and USB M30 automatic shutdown Transformer Centralized automatic lubrication Rigid tapping Inside machine LED work lamp x2 LED warning lamp in 3 colors MPG (manual pulse generator) mobile remote control with cable Screws and soles for leveling the machine Tool box + tools Operating manuals and spare parts list Telescopic guards for all 3 axes Fully enclosed workspace with self-locking doors CE mark 2 year warranty on control 1 year on machine Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten bv Coevorden, Holland

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Ppodpfx Aexy Tmnjhljt

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Pjdpfexy Tlwex Ahlept

Condition: good (used), Stock number: 3057 Manufacturer: Deckel MAHO Year of manufacture: 1999 Model: DMU 60 E Machine number: 11080000273 Control: Heidenhain TNC 624 M Operating hours: 34,055 h Spindle hours: 8,787 h Table: 1,000 x 540 mm Table load capacity: 350 kg Travel distances (X/Y/Z): 600 – 525 – 500 mm Spindle taper: SK 40 Tool changer: none Speed range: 20 to 12,000 rpm Spindle power: 10 / 15 kW Feed rate: 0 to 10 m/min Rapid traverse: 15 m/min Psdpfx Ahjx Dtqbolept Accessories: coolant system; 3D probe Condition: good Connected load: 26 kW Machine dimensions: 3,000 x 2,100 x 2,300 mm Weight: approx. 4.5 t

Condition: ready for operation (used), Year of construction: 2007, A Mazak CNC 5-axis machining center with a dual pallet changer is available. Spindle power: 22kW, speed: 10000rpm, rapid traverse: 42m/min, tool positions: 80, tool holder: SK50, coolant pressure: 70bar, control system: Mazatrol Matrix. Including CNC option package Performance, preparation for Monitoring System B, Mayfran Consep 2000 chip conveyor and tool length measuring device. Documentation available. An on-site inspection is possible. Pedpfxoy R Dt Aj Ahlopt