Used Bf-Tec Z3050X16 for sale (6,277)

Condition: good (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, controller manufacturer: Röders, table width: 700 mm, table length: 900 mm, spindle speed (max.): 36,000 rpm, operating hours of spindle: 100 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center Röders Tec RP 800 Year of manufacture: 2005 Control: Röders Tec Spindle speed: 35,000 rpm Spindle has been overhauled – approx. 100 hours run time Drive power: 17 kW Tool holder: HSK 50 Number of magazine slots: 30 Internal coolant supply: 20 bar X-axis: 800 mm Y-axis: 600 mm Ljdpfey Rgalex Amrjac Z-axis: 400 mm Equipment: Chip conveyor Coolant system 3D probe Electronic handwheel

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2017, total width: 2,470 mm, total height: 1,540 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2017, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Rear axle 4: Max. axle load: 9000 kg Weights Empty weight: 6.358 kg Carrying capacity: 37.642 kg GVW: 44.000 kg Condition Technical condition: good Visual appearance: good Lajdpfx Ajy Dcbfjmrsc Identification Registration number: OV-84-VK = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2013, total width: 2,470 mm, total height: 1,520 mm, color: black, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - EBS - Lift axle - Air suspension - Disc brakes = Remarks = Nice 2013 D-TEC FLEXITRAILER 45FT High Cube swap body chassis with SAF axles, equipped with disc brakes, ABS/EBS, first axle = lift axle, extendable in 2 positions (middle and rear) + fixed front, suitable for 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC containers. Unladen weight: 5,140 kg; Gross vehicle weight: 43,000 kg; tyres: 385/65-R22.5 (R: 6/4/4 mm; R: 6/6/5 mm). Dutch registration with valid MOT (APK) until 26.10.2026. 2 units available. = Further information = Laedpfx Asx T Di Nsmroc Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,070 kg Payload: 37,930 kg Gross vehicle weight: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable chassis: Yes Maintenance, history and condition MOT (Technical inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: OX-40-BN Further information Contact Arne Honingh for more information.

Condition: used, functionality: fully functional, empty load weight: 8,810 kg, maximum load weight: 25,690 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 03/2000, suspension: air, tire condition: 50 %, color: blue, M-Tec Mathis 146 Silo transporter 2 axles Overall length of trailer: 6.90 m Air suspension GVWR 34,500 kg - Payload 25,690 kg Tires: 50% tread remaining Net export price: 15,000.00 Euro Laedpfx Ajy Ud A Semrsc All information subject to change without notice; errors and omissions excepted.

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Empty weight: 3.216 kg Carrying capacity: 40.784 kg GVW: 44.000 kg Technical condition: very good Visual appearance: very good = Additional options and accessories = Laodpsxu Ddgofx Amrsc - ADR - Air suspension - Disc brakes - EBS - Lift axle

Year of construction: 2016, condition: excellent (used), 24V , 100VA , max.7 bar Ljdpfxolqwz Ts Amroac

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Capacity: 20 HL/hour Application: Beer Configuration: Automated, HMI-controlled   Lasdpfxeyk Ab Do Amrec

Condition: used, Year of construction: 2020, Manufacturer : Hagmann Tec AG Model: MEDIMAT 711-45 Year : 2020 Type : Heat sealer / Sealing machine Maximum power : 8 kW Pressure : 6,0 - 8,0 bar Format : interchangeable sealing plate Lsdox R Dfrspfx Amrsac Sealing surface 550x350mm Sealing temperature up to 250°C Sealing force 10-70 kN Sealing time up to 9.9 seconds Documentation available

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel X-axis travel: 600 mm Ledpexvybdefx Amreac Y-axis travel: 450 mm Z-axis travel: 300 mm Rapid traverse X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min Work Table Table width: 405 mm Table height: 405 mm Table load capacity: 800 kg Rotary table diameter: 405 mm Spindle Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of tool magazine pockets: 26 MACHINE DETAILS Control model: RMS6, Version 3.18 Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Input voltage: 400 V EQUIPMENT Documentation/manual Continuously variable spindle speed Chip conveyor Blum laser 3D tool probe Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction unit

Condition: new, functionality: fully functional, - Dimensions • Length: 3.4 metres (11’ 1’’) • Width: 2 metres (6’ 6.75’’) • Height: 2.4 metres (7’ 10.5’’) Lsdpfxsy Iwd As Amroac - Operating weight: 6,740 kg - Engine: Cummins B4.5 T4F/STG V, 115 kW (155 HP) - Transmission: Hydrostatic drive - Fuel tank: 160 litres (42 gallons)

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Lasdpfxey Iwdvo Amrjc Year of manufacture: 2025 Operating hours:

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Lodpsiid Hwsfx Amrsac Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Lasdpfx Amjdzqptorsc Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type Lodjdzqb Espfx Amreac WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Year of construction: 2007, operating hours: 2,568 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 4,900 kg, pressure: 200 bar, electrical fuse: 27 A, We offer this used LUX VM-TEC K50V4 baler for paper, foil, and plastics, year of manufacture 2007. The baler comes complete with conveyor. Ledpfjy H E R Iex Amrsac Model: K50V4 Year of manufacture: 2/2007 Production number: abba359 Serial number: Cont-000089 Power: 18.5 kW Current: 27 A Voltage: 400 V Frequency: 50 Hz Maximum pressure: 200 bar Weight: 4,900 kg If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0656-000, space requirement length: 7,000 mm, space requirement width: 5,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 5,000 mm, total width: 5,000 mm, total length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet length: 1,200 mm, control cabinet width: 400 mm, type of input current: three-phase, input voltage: 380 V, power: 30 kW (40.79 HP), 6 stainless steel silos, of which 3 silos are equipped with internal mixers. Capacity per silo approx. 6 m³. Additionally, there is a big bag filling station with dust extraction included. Control cabinet including weighing hopper for batch preparation. Lasdpex R Sr Hofx Amrsc

Condition: excellent (used), roller chain, drive chain -per package: Length: 5 m -Size reinforced: 16B-1 1-way 1" x 17.02 Ledpfx Asb A Niqsmreac -Quantity: 23 x pieces packages available -Price: per package -Package weight: 14 kg/piece

Condition: good (used), Control module, compact control unit, fan coil control, electronic module -Manufacturer: Meitav-tec, Universal Fan Coil Control -Type: MIGA1-FC-SUPER -Operating voltage: 230 volts -Cardboard dimensions: 170/90/H45 mm -Weight: 0.5 kg Laodjiiigpepfx Amroc

Condition: good (used), diamond core drilling machine -Drill stand -vacuum pump -Water pump reservoir Lajdpfx Amsb A H U Ajrec -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x package available Laedpfx Ascbki Uemroc -Price: per package -Weight complete: 7.6 kg/package

Condition: used, Drive chain, duplex chain, roller chain -Size: 28B-2 1 3/4 "inches -Width: 125 mm Lajdpfxoc Ibypo Amrec -Length: 0.9 m -Price: per meter -Number: 3x chains available -Weight: 15 kg

Condition: used, Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package Ljdpfxscbkkbj Amreac -Weight complete: 11.5 kg/package

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Precision Lathe RML 1640V – Comprehensive Equipment Description: This machine is ideally suited for tool manufacturing, training workshops, maintenance departments, as well as precise single-piece and small-batch production. Features: - 3-axis digital readout - 3-jaw chuck with internal and external jaws - Coolant system - Removable gap bridge - Hardened and ground bedways - Fixed steady rest - Live center - Multifix quick-change toolpost - Slip clutch for feed overload protection - Foot brake - Machine work light - Bed stop with micrometer adjustment - Toolmaker’s accuracy according to DIN 8605 - Two-tone paint: Blue (RAL 5012) / Grey (RAL 7032) - CE conformity Lajdoyudwbjpfx Amrsc - German operating manual and spare parts list Technical Data: Swing over bed: 410 mm Swing over cross slide: 264 mm Swing in gap: 533 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle bore: 52.5 mm Spindle mount: D1-6 DIN 55029 Cross slide travel: 220 mm Spindle speeds: 20 – 2500 rpm Number of speed ranges: 2 Speed range 1: 20 – 400 rpm Speed range 2: 400 – 2500 rpm Motor power: 3.7 kW Tailstock quill diameter: 52 mm Tailstock quill travel: 152 mm Quill taper: MT 4 Machine weight: 1400 kg Thread cutting range: Metric: (39) 0.2 – 14 mm Whitworth: (45) 2 – 72 TPI Diametral Pitch: (21) 8 – 44 DP Module: (18) 0.3 – 3.5 MOD Other: Inspection by appointment. The machine is ready for immediate use.

Condition: good (used), Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal actuator Lasdpfehu Sumex Amroc -Manufacturer: L-TEC, Pedal actuator foot remote control type FC-4 -Connector plug: 5-pin -Overall dimensions: 300/155/H190 mm -Weight: 4.2 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring Laodpevri Nmefx Amroc - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.